中国北方海域扇贝产品质量的比较研究

由于局部养殖环境质量恶化和病害频发的困扰，严重影响了我国扇贝养殖产量、质量和出口创汇。针对扇贝养殖面临产品质量不高等问题，系统评估我国扇贝产品质量十分必要。本文以我国北方海域海湾扇贝Argopecten irradians和栉孔扇贝Chlamys farreri为研究对象，较为系统地研究了大连湾、秦皇岛、莱州湾、烟台、威海、胶州湾、胶南等七海域扇贝质量，包括营养品质、重金属富集、麻痹性贝毒污染三个方面。 研究结果表明，栉孔扇贝的蛋白质营养优于海湾扇贝，而脂类营养则低于海湾扇贝，海湾扇贝在不同海域的主成分分析可以看出，地理位置接近的海域营养状况比较相似，各海域的综合营养品质依次为：莱州湾＞烟台＞大连湾＞秦皇岛＞威海＞胶州湾＞胶南； 重金属含量存在组织差异性，贝边的含量总是高于贝柱，取自同一海域的栉孔扇贝的重金属含量高于海湾扇贝，六种重金属的平均含量排序为：Zn＞Cu＞Cd＞As＞Pb＞Hg，部分海域扇贝Cd和Zn有超标现象，两种重金属分别超标1.41～17.28倍和1.24～1.59倍，Hg、Pb、As和Cu均未超标； 用小白鼠生物测试法对扇贝内脏团、贝柱和其他组织的贝毒含量进行测定，结果仅在秦皇岛和大连湾海湾扇贝的内脏团中检测出麻痹性贝毒，其毒力分别为2.17 Mu•g -1和2.48 Mu•g -1，未超过食用安全标准（4 Mu•g -1），其他海域的样品均未检测到麻痹性贝毒的存在。

甲壳单糖、寡糖、低聚糖制备方法的优化与比较研究

该文通过大量实验,确定了制备单糖、寡糖及低聚糖的最佳生产工艺,并对几种制备方法做了比较研究.该文采用氧化降解和微波降解等不同技术对甲壳低聚糖的制备工艺进行了研究.H<,2>O<,2>作为氧化剂,在酸性条件下,采用4因素3水平进行正交实验,得到了制备分子量2000以下的寡糖的最佳条件.微波降解制备低聚糖目前尚未见报道,经过该实验证明此方法可降低能耗,减小污染,节省时间和原料,是一个具有产业化前景和市场潜力的好方法.通过以不同的壳聚糖为原料,探讨了在微波场作用下纯溶剂及盐效应对分子量变化的影响,最终产物的分子量均在1×10<'5>～10×10<'5>之间.根据IR光谱,壳聚糖降解前后主要峰的位置都无变化,只是随壳聚糖相对分子质量的降低各峰峰强有所变化,证明了壳聚糖氧化降解及微波降解制备寡糖、低聚糖是以开裂壳聚糖的β-1.4糖苷键来进行.该项研究对更好的开发利用甲壳质资源,促进中国海洋生物制品的发展具有十分重要的意义.

对螺钉无轴向压力的高精度自动螺丝刀的设计

区别于现有的电动、气动螺丝刀工具,该螺丝刀系统在驱动螺丝时,能对螺钉头实现无轴向压力的调节。刀头在旋转的同时随螺钉轴向进给,转速与进给量匹配,保证刀头与螺钉不脱节。该系统调整精度高,刀头转动精度可达0.72°,其应用于断路器类低压电气产品的自动调试,对确保产品质量、提高生产效率具有积极意义。

冷轧MES机组作业计划过程中的任务分配法

基于鞍钢新轧集团股份有限公司冷轧薄板厂MES工程的实际情况,介绍了机组排产作业计划过程中的任务分配方法。该方法以机组与生产任务的最佳匹配、机组的负荷平衡为性能指标,采用了实时最小负荷分配规则,科学地解决了冷轧生产线CIMS环境下机组排产作业计划的在线生成问题,实现了生产线上的生产路径优化控制,从而提高了生产质量和设备利用率。

企业经营风险决策的组织行为学研究

This thesis has investigated the risk preferences of the Chinese company managers in kinds of simulated decision situations and their perceptions of risk concerning types of business decisions. Four studies are conducted: Study I is utility analysis. 214 company managers and 46 middle - school headmasters have responded to Utility Measurement Survey. The results indicate: (1) The risk preferences of the managers vary in the different decision situations. In most of the situations, most of the managers are risk aversion; In few situations, they are risk-seeking. (2) In some of the decision situations, there are significant differences on risk preference between business managers and school headmasters, male managers and female managers, senior managers and junior managers, managers with high qualifications and managers with low qualifications, non-state-owned firms' managers and state-owned firms' managers, medium-small sized firms' managers and large-sized firms' managers. In the other situations there aren't significant differences between them. (3) In all of the decision situations, so significant differences on risk preference are found among managers with different marriage, experience, age and education. Study II is risky decision simulation. The Risky Decision Situations Simulation Survey is administered to 82 company managers. The result indicates that firm culture, business condition, survival limit and risk preference of the superior influence the managers' risk decision-making behavior. Study III is perceptions of business decision risks. 68 company managers have filled in Decision Cases Risk Perception Inventory. The results indicate: (1) Inaccurate market analysis and prediction, instable politics and the changes of economic policy are the more risky elements to strategy decision. (2) Erroneous market analysis and prediction, appearance of new technology and the changes of market demands are the more risky elements to investment decision. (3) Poor quality control, backward technology and too large stocks are the more risky elements to production decision. (4) Shortage of development fund, wrong choice in development project and limitation of the development ability are the more risky elements to new production development decision. (5) No payment of the foreign partner's capital, the changes of national relevant policy, difficulty in marketing, too high selling prices of foreign partner's equipments are the more risky elements to joint-venture decision. (6) Unfamilarity with oneself and misjudgement in qualification of oneself are the more risky elements to personnel decision. (7) Bad market of the product, defects in product quality and the changes of consumers demands are the more risky elements to marketing decision. (8) Wrong strategy and ambiguous goals are the more risky elements to public relation decision. (9) Violation of the law, ambiguous goals and poor creation are the more risky elements to advertisement decision. (10) Deterioration of diplomatic relations, unsuitable products for foreign consumers and unfamilarity with foreign market are the more risky elements to international business decision. Study IV is structured interview. 5 company managers have answered all questions of the Interview Questionnaire. The results indicate: (1) The managers think that risks are the possible unfavourable consequences of decisions; (2) The self-ratings of the managers coordinate with the results of utility measurement; (3) The managers admit that risks always accompany bussiness decision; (4) Individual difference is found among managers on risk perception. This thesis has also pointed out the important implications of the research and discussed several further questions.

Using oxidized carbon nanotubes as matrix for analysis of small molecules by MALDI-TOF MS

Oxidized carbon nanotubes are tested as a matrix for analysis of small molecules by matrix assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF-MS). Compared with nonoxidized carbon nanotubes, oxidized carbon nanotubes facilitate sample preparation because of their higher solubility in water. The matrix layer of oxidized carbon nanotubes is much more homogeneous and compact than that of nonoxidized carbon nanotubes. The efficiency of desorption/ionization for analytes and the reproducibility of peak intensities within and between sample spots are greatly enhanced on the surface of oxidized carbon nanotubes. The advantage of the oxidized carbon nanotubes in comparison with alpha-cyano-4-hydroxycinnamic acid (CCA) and carbon nanotubes is demonstrated by MALDI-TOF-MS analysis of an amino acid mixture. The matrix is successfully used for analysis of synthetic hydroxypropyl P-cyclodextrin, suggesting a great potential for monitoring reactions and for product quality control. Reliable quantitative analysis of jatrorrhizine and palmatine with a wide linear range (1-100 ng/mL) and good reproducibility of relative peak areas (RSD less than 10 %) is achieved using this matrix. Concentrations of jatrorrhizine (8.65 mg/mL) and palmatine (10.4 mg/mL) in an extract of Coptis chinensis Franch are determined simultaneously using the matrix and a standard addition method. (c) 2005 American Society for Mass Spectrometry.

Beam quality improvement of laser diode array by using off-axis external cavity

A novel off-axis external cavity is designed for laser diode array to improve the beam quality. In this external cavity, a circle aperture with variable size is used as a spatial filter. The diameter of aperture is optimized to 1.2mm and the off-axis angle of external cavity is optimized at 2.6 deg. In the optimal case, the beam parameter product (BPP) of laser diode array is reduced to 121 mm. mrad from 1050 mm. mrad with external cavity optical efficiency of 81%. (C) 2007 Optical Society of America.

Some new bounds on eigenvalues of the Hadamard product and the Fan product of matrices

Let A and B be nonsingular M-matrices. A lower bound on the minimum eigenvalue q(B circle A(-1)) for the Hadamard product of A(-1) and B, and a lower bound on the minimum eigenvalue q(A star B) for the Fan product of A and B are given. In addition, an upper bound on the spectral radius rho(A circle B) of nonnegative matrices A and B is also obtained. These bounds improve several existing results in some cases and the estimating formulas are easier to calculate for they are only depending on the entries of matrices A and B. (C) 2009 Elsevier Inc. All rights reserved.

Purification of High-quality Plastid DNA from the Brown Alga Laminaria japonica Sporophytes

Extracting DNA from a variety of algae is rather difficult because of high levels of polysaccharides, tannins, and phenolics as these interfere with DNA isolation and downstream applications. High-quality plastid DNA (ptDNA) purification is particularly difficult because of its small proportion in total genomic DNA. This report describes an improved protocol for ptDNA purification that efficiently produces high-quality ptDNA from sporophytes of Laminaria japonica and several other algae. This improved protocol simplifies procedures for ptDNA purification and improves yield to 150-200 mu g of ptDNA per 100 g of frozen algal tissue. Polymerase chain reaction (PCR) amplification of conserved sequences has been used to verify purity of the ptDNA product.