SOLVENT-EXTRACTION OF SC(III), ZR(IV), TH(IV), FE(III), AND LU(III) WITH THIOSUBSTITUTED ORGANOPHOSPHINIC ACID EXTRACTANTS

The solvent extraction of Sc(III), Zr(IV), Th(IV), Fe(III) and Lu(III) with Cyanex 302 (bis(2,4,4-trimethylpentyl)monothiophosphinic acid) and Cyanex 301 ( bis(2,4,4-trimethylpentyl) dithiophosphinic acid) in n-hexane from acidic aqueous solutions has been investigated systematically. The effect of equilibrium aqueous acidity on the extraction with these reagents was studied. The separation of Th(IV), Fe(III) and Lu(III) from Sc(III), or the separation of other metals from Lu(III) with Cyanex 302, can be achieved by controlling the aqueous acidity. However, Cyanex 301 exhibited a poor selectivity for the above metals, except for Lu(III). The extraction of these metals with Cyanex 272, Cyanex 302 and Cyanex 301 has been compared. The stripping percentages of Sc(III) for Cyanex 302 and Cyanex 301 in a single stage are near 78% and 75% with 3.5 mol/L and 5.8 mol/L sulphuric acid solutions, respectively. The effects of extractant concentration and temperature on the extraction of Sc(III) were investigated. The stoichiometry of the extraction of Sc(III) with Cyanex 302 was determined. The role of different components of Cyanex 302 in the extraction of Sc(III) was discussed.

EXTRACTION MECHANISM OF SC(III) AND SEPARATION FROM TH(IV),FE(III) AND LU(III) WITH BIS(2,4,4-TRIMETHYLPENTYL)PHOSPHINIC ACID IN N-HEXANE FROM SULFURIC-ACID-SOLUTIONS

The extraction equilibrium data of sulphuric acid and scandium(III) with bis(2,4,4-trimethylpentyl)phosphinic acid (H[BTMPP]) from sulphuric acid solutions have been obtained. There are two extraction mechanisms of scandium(III) with H[BTMPP] at different

H[DEHP]从不同介质中萃取稀土（III）(Sc、Y、Ho、Er、Yb、Lu)及Fe(III)、Zn(II)的机理

本文分另研究了H[DEHP]从不同酸性介质中萃取稀土（III）(Sc、Y、Ho、Er、yb、Lu)及Fe(III)、Zn(II)的机理及性能。一、H[DEHP]从 H_2SO_4介质中萃取Sc(III)的机理 1. H[DEHP]萃取H_2SO_4及其机理 2. H[DEHP]萃取Sc(III)的机理，用斜率法和饱和法确定了H[DEHP]的正庚烷溶液从H_2SO_4溶液中萃取Sc_2(SO_4)_3的机理及萃合物组成。研究表明，H[DEHP]萃取Sc(III)在高、低两种酸度范围内存在着两种不同的萃取机理。二、H[DEHP]从HCl介质中萃取Ln(III)和Fe(III)的性能及H[DEHP]萃取Ln(III)的机理研究了H[DEHP]的正庚烷溶液从HCl介质中萃取稀土（III）(Sc、Y、Ho、Er、Yb、Lu)和Fe(III)的性能，得出H[DEHP]在相同条件下萃取以上各金属离子的顺序是：Sc(III)>Fe(III)>Lu(III)>Yb(III)>Er(III)>Y(III)>Ho(III), 并计算了各金属离子之间的分离因素（β）。文中还讨论了Sc(III)、Fe(III)、Lu(III)之间的分离以及重稀土离子间的萃取分离，同时与相同实验条件下HEH[EHP]的萃取性能进行了比较，为新的萃取体系提供了一些参数。三、H[DEHP]从不同介质中萃取Fe(III)的机理，研究了H[DEHP]的正率烷溶液从Hcl介质中和H[DEHP]的正庚烷溶液从H_2SO_4介质中萃取Fe(III)的平衡规律；用斜率法、饱和法以及IR和NMR谱等讨论了低酸度下的萃取机理。四、H[DEHP]萃取Zn(II)的机理，研究了H[DEHP]的正率烷溶液从Hcl介中萃取Zn(II)的平衡，利用斜率法、饱和法及SR、NMR谱等讨论了低Hcl浓度下的萃取机理。

Separation of scandium(III) from lanthanides(III) with room temperature ionic liquid based extraction containing Cyanex 925

The separation of Sc(III) from Y(III), La(III) and Yb(III) in [C(8)mim][PF6] containing Cyanex 925 has been investigated, and is reported in this paper. A cation exchange mechanism of Sc(III) in [C(8)mim][PF6] and Cyanex 925 is proposed by study of the influence of anionic and cationic species on the extraction. The coefficient of the equilibrium equation of Sc(III) was confirmed by slope analysis of log D-Sc vs log [Cyanex 925], and the loading capacity also confirmed the stoichiometry of Cyanex 925 to Sc(III) was close to 3:1. Infrared data for Cyanex 925 saturated with Sc(III) in [C(8)mim][PF6] indicated strong interaction between P=O of Cyanex 925 and Sc(III). In addition, the relationship between log D-Sc and temperature showed that temperature had little influence on the extraction process, and the resulting thermodynamic parameters indicated that an exothermic process was involved.

Solvent extraction of scandium(III) by Cyanex 923 and Cyanex 925

The extraction equilibria of Sc(III), Zr(IV), Ti(IV), Th(IV), Fe(III) and Lu(III) from sulphuric or hydrochloric acid media by Cyanex 923 (mixture of straight chain alkylated phosphine oxides) and Cyanex 925 (mixture of branched chain alkylated phosphine oxides) were studied at various aqueous acidities. The extractant Cyanex 923 demonstrated better scandium loading and selectivity for TI(IV). Fe(III) and Lu(III) than Cyanex 925. The effects of extractant concentration on the extractions of sulphuric acid and Sc(III) by Cyanex 923 were examined. The stoichiometries of the extraction reactions were postulated based on slope analysis. The experimental results indicate that Cyanex 923 can be employed to recover scandium directly from the hydrolytic mother solution arising from TiO2 production via the sulphate process. The parameters studied were scandium loading capacity, phase ratio, concentrations of Ti(IV) scrubbing and Sc(III) stripping agents. A new solvent extraction technology of scandium recovery was developed. The purity of the final Sc(III) product is above 95% with a yield > 94%. (C) 1998 Elsevier Science B.V.

Extraction and separation of heavy rare earth (III) with Extraction Resin containing di(2,4,4-trimethyl pentyl) phosphinic acid (Cyanex 272)

Extraction resins, of the type of;levextrel, (which is a collective term for styrene/divinylbenzene based copolymers of predominantly macroporous structure that contain a selective extractant) are important for the recovery and separation of metal ions, as they combine features of solvent extraction and ion exchange resins. This paper presents the results of the adsorption of heavy rare earth ions (Ho(III), Er(III), Tm(III), Yb(III), Lu(III) and Y(III)) from hydrochloric acid solutions at 0.2 mol/L ionic strength and 50 degrees C by the extraction resin containing di (2,4,4-trimethyl pentyl) phosphinic acid (Cyanex 272) and the chromatographic separation of (Er(III), Tm(III) and Yb(III)). Technological separation products, with purity and yield of Tm2O3 >99.97%, >80%, Er2O3 >99.9%, >94% and Yb2O3 >99.8%, >80% respectively, have been obtained from a feed having the composition Tm2O3 60%, Er2O3 10%, and Yb2O3 3%, the others 27%. The distribution coefficients, extraction equilibrium constants and separation factors have been determined as a function of acidity, loading of the resin and rare earths, flow rates and column ratios. The resolutions and efficiencies of separation of Er/Tm/Yb each other have been calculated. The stoichiometry of the extraction of rare earth ions has been suggested as well.

Separation of heavy rare earth elements with extraction resin containing 1-hexyl-4-ethyloctyl isopropylphosphonic acid

This paper presents the results of the adsorption of heavy rare earth ions (Gd(III), Tb(III), Dy(III), Ho(III), Er(III), Tm(III), Yb(III), Lu(III) and Y(III)) from hydrochloric acid solutions at 30 degreesC by the extraction resin containing 1-hexyl-4-ethyloctyl isopropylphosphonic acid (HEOPPA), which has higher steric hindrance, higher selectivities and lower extraction and stripping acidity than di(2-ethylhexyl)phosphoric acid (DERPA) or 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (HEH/EHP). The dependence of acid concentration, flow rate and amounts of rare earth ions sorbed on the separation of Er-Tm, Tm-Yb and Er-Tm-Yb mixtures has been studied. The baseline chromatographic separation of Er-Tm-Yb mixture has been observed. Satisfactory results with purity and yield of Tm2O3>99.71% and >71.25%, Er2O3>99-81% and >94.17%, and Yb2O3>99.74% and >89.83%, respectively, have been obtained. The parameters such,as resolution, separation factors and efficiencies have been determined as a function of acidity, loading of rare earth elements and flow rates. The stoichiometry of the extraction of rare earth ions has been suggested as well.

LANTHANIDE PERCHLORATE COMPLEXES OF 1,4-BIS(PHENYLSULFINYL)BUTANE

Seven trivalent lanthanide perchlorate complexes of the types [Ln(bphab)(4)ClO4] (ClO4)2 (where La = La(III), Pr(III), Nd(III) and Eu(III)) and [Ln(bphab)(3)ClO4] (ClO4)(2) (where Ln = Ho(III), Er(III) and Lu(III), and bphab = 1,4-bis(phenylsulfinyl)butane) have been synthesized by the reaction of bphsb with lanthanide(III) perchlorate in methanol-chloroform mixture. The complexes have been characterized by elemental analyses, molar conductance, electronic and infrared spectral techniques. Several bonding parameters have been calculated from the absorption spectra of the Pr(III), Nd(III), Ho(III) and Er(III) complexes. Infrared spectral data suggest that bphsb acts as bidentate ligand coordinating through the oxygen atoms of the S=O moieties.

SYNTHESES AND CRYSTAL STRUCTURES OF THE COMPLEXES OF RARE EARTH WITH FUMARIC ACID

Six compounds of M2F3 center dot 1.2H(2)O (M=EU, Ga, Tb, Y, Er, LU: H2F=Fumaric acid) have been synthesized. The structures of Eu(III), T b(III), Y(III), Er(III) and Lu(III) compounds have been determined by singal crystal X-ray diffraction method. The complex of Eu(III) crystallizes in tri-clinic space group P (1) over bar, and the coordination number of Eu3+ is ten. The other four complexes crystallize in monclinic space P2(1)/c, and the coordination numbers of the metal ions are eight. Each of the complexes shows a three-dimensional net structures.

Studies of high DC current induced degradation in III-V nitride based heterojunctions

We report experiments on high de current stressing in commercial III-V nitride based heterojunction light-emitting diodes. Stressing currents ranging from 100 mA to 200 mA were used. Degradations in the device properties were investigated through detailed studies of the current-voltage (I-V) characteristics, electroluminescence, deep-level transient Fourier spectroscopy and flicker noise. Our experimental data demonstrated significant distortions in the I-V characteristics subsequent to electrical stressing. The room temperature electro-luminescence of the devices exhibited a 25% decrement in the peak emission intensity. Concentration of the deep-levels was examined by deep-level transient Fourier spectroscopy, which indicated an increase in the density of deep-traps from 2.7 x 10(13) cm(-3) to 4.2 x 10(13) cm(-3) at E-1 = E-C - 1.1 eV. The result is consistent with our study of 1/f noise, which exhibited up to three orders of magnitude increase in the voltage noise power spectra. These traps are typically located at energy levels beyond the range that can be characterized by conventional techniques including DLTS. The two experiments, therefore, provide a more complete picture of trap generation due to high dc current stressing.

Characterization of hot-electron effects on flicker noise in III-V nitride based heterojunctions

We report experiments on hot-electron stressing in commercial III-V nitride based heterojunction fight-emitting diodes. Stressing currents ranging from 100 mA to 200 mA were used. Degradations in the device properties were investigated through detailed studies of the I-V characteristics, electroluminescence, Deep-Level Transient Fourier Spectroscopy and flicker noise. Our experimental data demonstrated significant distortions in the I-V characteristics. The room temperature electroluminescence of the devices exhibited 25% decrement in the peak emission intensity. Concentration of the deep-levels was examined by measuring the Deep-Level Transient Fourier Spectroscopy, which indicated an increase in the density of deep-traps from 2.7 x 10(13) cm(-3) to 4.21 x 10(13) cm(-3) at E-1 = E-C - 1.1eV. The result is consistent with our study of 1/f noise, which exhibited up to three orders of magnitude increase in the voltage noise power spectra. Our experiments show large increase in both the interface traps and deep-levels resulted from hot-carrier stressing.

稀土(III)及铜(II)、锌(II)有机磷（膦）酸酯配合物的晶体结构和振动光谱研究

本文包括标题配合物的结构和振动光谱两部分，共涉及了M(DMP)_n {n=2.3, M=2a, Nd, Cu. Zn}, Ln(DPP)_3{2n=2a-2u, Y}和Ln(BBP)_3 {Ln=La-Lu. Y}三类三十四个配合物。在结构方面，首次测定了Zn(DMP)_2和Cu(DMP)_2呈现出链状配位高聚结构，而La(DMP)_3, La(DMP)_3则为平面网状配位高聚结构。在Zn(DMP)_2, La(DMP)_3和Nd(DMP)_3中，配体以对称“O－P－O”桥键与金属原子配位，在相邻金属原子间形成双桥键。在Zn(DMP)_2中，每个Zn原子通过“O－P－O”双桥键与另两个Zn原子连接，Zn原子配位数为4，配位多面体为四面体构型；在La(DMP)_3和Nd(DMP)_3中，每个稀土原子通过“O－P－O”双桥键与另外三个稀土原子相连接，稀土原子的配位数为6，配位多面体LnO_6为八面体构型。在Cu(DMP)_3中， 配体以对称和非对称“O－P－O”桥键两种形式存在，其中非对称配位的配体形成为“Cu-O-P_O-Cu"-Cu，在铜原之间形成了一个单氧桥键。每个Cu原子通过双“O－P－O”桥键以及双单氧原子桥键与另外三个Cu原子相连接，Cu原子配位数为5，配位多面体为四角锥构型。在振动光谱方面，得到了上述配合物较为完整的光谱数据，并对主要光谱带进行了归属，如V_(M-O), V_(PO_2), V_(P-O(c)),VC-O, VP-C及σ_PO_2等。在稀土配合物中，稀土配位键的伸缩振动V_(vn-o)位于250cm~(-1)附近。V_(Cu)和V_(Zn-o)，在Cu(DMP)_2和Zn(DMP)_2中，分别为(412cm~(-1), 370cm~(-1))和(393cm~(-1), 386cm~(-1))。V_(as)PO_2和V_sPO_2，在配合物振动光谱中，分别在1130－1249cm~(-1)区和1084－1156cm~(-1)区。在稀土配合物中，VL_(n-o), V_(as)PO_2频率值，随镧系收缩逐渐递增。在Cu(DMP)_2红外谱中，非对称配体和对称配体的V_(as)PO_2和V_sPO_2, 分别为(1249cm~(-1)，1156cm~(-1))及(1177cm~(-1)，1090cm~(-1))，其劈裂值△V(V_(as)PO_2-V_sPO_2)为93cm~(-1)和87cm~(-1)。通过对配合物的常温和低温红外光谱的比较，确认了La(DMP)3和Nd(DMP)_3的176cm~(-1)、Ln(DPP)_3和Ln(BBP)_3的150cm~(-1)附近吸收为晶格振动。Ln(DPP)_3、Ln(BBP_3)的光谱性质与Ln(DMP)_3相似，我们认为它们之间具有相同的骨架结构－平面网状配位高聚结构。

Properties of complex of Tb(III) and poly(N-isopropylacrylamide)-g-poly(N-isopropylacrylamide-co-styrene) core-shell nanoparticles

We successfully prepared a new kind of thermoresponsive and fluorescent complex of Tb(III) and PNIPAM-g-P(NIPAM-co-St) (PNNS) core-shell nanoparticle. It was found that Tb(III) mainly bonded to 0 of the carbonyl groups of PNNS, forming the novel (PNIPAM-g-P(NIPAM-co-St))-Tb(III) (PNNS-Tb(III)) complex. The maximum emission intensity of the complex at 545 nm is enhanced about 223 times comparing to that of the pure Tb(III). The intramolecular energy transfer efficiency from PNNS to Tb(III) reaches 50%. When the weight ratio of Tb(III) and the PNNS-Tb(III) complex is 1.2 wt.%, the enhancement of the emission fluorescence intensity at 545 nm is highest.

Studies of interaction between iron (III) and intermediates of synthetic neuromelanin by means of cyclic voltammetry of Fe(CN)(3-)(6) and dopamine

Neuromelanin is a complex polymer pigment found primarily in the dopaminergic neurons of the human substantia nigra, whose composition is complex including production of dopamine auto-oxidation, glutathione and a variety of amino acid. Neuromelanin forms stable complex with iron (111). We observed that 5,6-dihydroxyindole and its ramification possessed strong ability of chelating iron (111), and they are the production of dopamine auto-oxidation under physiological pH condition. In the present Of L-Cysteine, the relative yields of electrochemical oxidation of dopamine also had strong ability of chelating iron (111). The experimental results suggest that 5,6-dihydroxyindole and 5-S-cysteineldopamine play important roles in the process of synthetic neuromelanin chelating iron (111).