Optical interconnection for neural networks by use of a self-imaging function

A grating-lens combination unit is developed to form a scaling self-transform function that can self-image on scale. Then an array of many such grating-lens units is used for the optical interconnection of a two-dimensional neural network, and experiments are carried out. We find that our idea is feasible, the optical interconnection system is simple, and optical adjustment is easy. (C) 1998 Optical Society of America.

A high-performance tandem white organic light-emitting diode combining highly effective white-units and their interconnection layer

By utilizing 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline:Li/MoO3 as an effective charge generation layer (CGL), we extend our recently demonstrated single-emitting-layer white organic light-emitting diode (WOLED) to realize an extremely high-efficiency tandem WOLED. This stacked device achieves maximum forward viewing current efficiency of 110.9 cd/A and external quantum efficiency of 43.3% at 1 mu A/cm(2) and emits stable white light with Commission Internationale de L'Eclairage coordinates of (0.34, 0.41) at 16 V. It is noted that the combination of effective single units and CGL is key prerequisite for realizing high-performance tandem WOLEDs.

Thermal Strain Analysis of a Flip-Chip Package by a Modified Hybrid Method

介绍一种可用于微电子封装局部应变场分析的实验/计算混合方法,该方法结合了有限元的整体/局部模型和实时的激光云纹干涉技术,利用激光云纹干涉技术所测得的应变场来校核有限元整体模型的计算结果,并用整体模型的结果作为局部模型的边界条件,对实验难以确定的封装结构局部位置的应力、应变场进行分析.用这种方法对可控坍塌倒装封装结构在热载荷作用下焊球内的应变场分布进行了分析,结果表明该方法能够提供封装结构内应力-应变场分布的准确和可靠的结果,为微电子封装的可靠性分析提供重要的依据. For the reliability analysis of electronic packages, strains in very localized areas, such as an interconnection or a corner, need to be determined. In this paper, a modified hybrid method of global/local modeling and real time moire interferometry is presented. In this method, a simplified, coarsely meshed global model is developed to get rough information about the deformation of the microelectronic package. In order to make sure the global model has been reasonably simplified and the material properties ...

MODIFIED ENGAGEMENT METHOD FOR MATRIX OPERATION

We describe a modified engagement method for matrix operation based on a two-dimensional crossed-ring interconnection network, Our method incorporates fewer steps than that reported by Bocker et al. [Appl. Opt. 22, 804 (1983)], and its performance is found to be the most efficient (minimum steps) in comparison with other systolic and/or engagement methods for matrix operation. Thus, it may be helpful for other optical and electronic implementations of matrix operations. One compact optoelectronic integrity approach for implementing the modified engagement method is briefly described. (C) 1995 Optical Society of America

Local thermal fixing of a photorefractive LiNbO3 hologram by use of a CO2 laser

A real-time, in situ fixing method by use of heating with a CO2 laser beam is suggested for thermal fixing of a small local hologram in the bulk of a Fe:LiNbO3 photorefractive crystal. For heating up to 100 degrees C-200 degrees C a volume with a shape similar to that of the laser beam a heat-guiding technique is developed. On the basis of the heat-transfer equations, different heating modes with or without metal absorbers for heat guiding-obtained by use of a continuous or pulsed laser beam are analyzed. The optimal mode may be pulsed heating with absorbers. On this basis experiments have been designed and demonstrated. It is seen that the fixing process with CO2 laser beam is short compared with the process by use of an oven, and the fixing efficiency is quite high. (C) 1998 Optical Society of America.

Routing scheme, permutation properties, and optical implementation of a four-shuffle-exchange-based Omega network

The routing scheme and some permutation properties of a four-shuffle-exchange-based Omega network are discussed. The corresponding optical setup, which is composed of 2-D phase spatial light modulators and calcite plates, is proposed and demonstrated through mapping the inputs to a 2-D array. Instead of one shuffle-exchange followed by one switching operation as in ordinary Omega networks, in our presented system, the shuffle interconnection embraced in the switches is accomplished simply by varying the switching structure of each stage. For the proposed polarization-optical modules, the system is compact in structure, efficient in performance, and insensitive to the environment. (C) 1997 Society of Photo-Optical Instrumentation Engineers.

单块晶体集成的N×N纵横开关网络及其控制算法

设计了一种单块晶体集成的n×n纵横开关(Crossbar)网络。通过综合考虑晶体的双折射和全内双反射现象,以及晶体的电光效应,将构成n×n纵横开关网络的所有单元器件都集成到一块具有电光效应的双折射晶体上。同时,给出了该网络的控制算法,通过对开关工作状态的控制,可以实现任意输入输出通道之间的无阻塞连接。这种单块晶体集成的纵横开关网络具有能量损耗低、无阻塞、易安装、抗干扰等优点,适合于全光网络发展的需要。

Sub-nanosecond silicon-on-insulator optical micro-ring switch with low crosstalk

We demonstrate a sub-nanosecond electro-optical switch with low crosstalk in a silicon-on-insulator (SOI) dual-coupled micro-ring embedded with p-i-n diodes. A crosstalk of -23 dB is obtained in the 20-mu m-radius micro-ring with the well-designing asymmetric dual-coupling structure. By optimizations of the doping profiles and the fabrication processes, the sub-nanosecond switch-on/off time of < 400 ps is finally realized under an electrical pre-emphasized driving signal. This compact and fast-response micro-ring switch, which can be fabricated by complementary metal oxide semiconductor (CMOS) compatible technologies, have enormous potential in optical interconnects of multicore networks-on-chip.

THE MATRIX ANALYSIS FOR AN OPTICAL FREE-SPACE SWITCHING NETWORK AND AN OPTICAL CROSSOVER NETWORK WITH 4-FUNCTION INTERCHANGE NODES

A matrix analysis for free-space switching networks, such as perfect shuffle-exchange omega, crossover and Banyan is presented. On the basis of matrix analysis, the equivalence of these three switching networks and the route selection between input and output ports are simply explained. Furthermore, an optical crossover switching network, where MQW SEED arrays are used as electrically addressed four-function interchange nodes, is described and the optical crossover interconnection of 64 x 64, and high-speed four-function, interchange nodes is demonstrated in the experiment.

Recent Progress in Silicon Electro-optic Modulators for High Speed Applications

Silicon-based high-speed electro-optical modulator is the key component of silicon photonics for future communiction and interconnection systems. In this paper, introduced are the optical mudulation mechanisms in silicon, reviewed are some recent progresses in high-speed silicon modulators, and analyzed are advantages and shortages of the silicon modulators of different types.

Integrated MMI optical couplers and optical switches in Silicon-on-insulator technology

Integrated multimode interference coupler based on silicon-on-insulator has been become a kind of more and more attractive device in optical systems. Thin cladding layers (<1.0mum) can be used in SOI waveguide due to the large index step between Si and SiO2, making them compatible with the VLSI technology. Here we demonstrate the design and fabrication of multimode interference (MMI) optical couplers and optical switches in SOI technology.

Synthesis and characterization of PCL/PEG/PCL triblock copolymers by using calcium catalyst

Triblock copolymer PCL-PEG-PCL was prepared by ring-opening polymerization of epsilon-caprolactone (CL) in the presence of poly(ethylene glycol) catalyzed by calcium ammoniate at 60 degreesC in xylene solution. The copolymer composition and triblock structure were confirmed by H-1 NMR and C-13 WR measurements. The differential scanning calorimetry and wide-angle X-ray diffraction analyses revealed the micro-domain structure in the copolymer. The melting temperature T-c and crystallization temperature T-c of the PEG domain were influenced by the relative length of the PCL blocks. This was caused by the strong covalent interconnection between the two domains. Aqueous micelles were prepared from the triblock copolymer. The critical micelle concentration was determined to be 0.4-1.2 mg/l by fluorescence technique using pyrene as probe, depending on the length of PCL blocks, and lower than that of corresponding PCL-PEG diblock copolymers. The H-1 NMR spectrum of the micelles in D2O demonstrated only the -CH2CH2O- signal and thus confirmed. the PCL-core/PEG-shell structure of the micelles.

WIA网络与MODBUS网络互联设计与实现

本文首先介绍了WIA技术和Modbus协议的基本原理和结构,然后详细介绍了互联过程中使用的两种方式:透明传输方式和协议转换方式。分析了两种方式的适用范围和改造难度,并给出了实现案例。

工业无线通信与现场总线集成和互连的研究

近年来快速发展的无线通信技术对工业企业具有极大的吸引力，有助于工业企业降低生产成本、提高生产效率。但在目前阶段，无线通信信道开放和易受干扰、易错的通信特性以及现有的现场总线技术广泛的应用和人力、资金和技术等方面的巨大投入，使得工业无线技术还不可能、也没有必要完全替代现有的有线通信技术。因此，与现有的现场总线等有线通信技术共存和混合使用是当前工业无线通信技术发展和应用的主要方向之一。 工业通信为面向对生产过程监视、控制和管理的自动化系统提供通信服务，具有确定性、硬实时和高可靠性的通信要求。而工业无线通信与有线现场总线的集成和互连会产生一定的问题，影响自动化系统的正常运行。本文针对工业无线通信和有线现场总线集成和互连中存在的互操作和通信性能问题进行了深入的研究，并对WIA-PA和基金会现场总线的集成和互连进行了具体的实现和分析。 本论文首先系统地分析了工业无线通信技术与有线现场总线在工业企业中集成和互连的应用需求，指出了混合现场网段、有线和无线现场网段间、不同层次有线和无线网络的集成和互连是工业无线通信与现场总线混合使用的主要应用方式，并根据工业自动化系统和通信的特点和要求得出互操作和通信性能是集成和互连过程中存在的主要问题。 其次，分析了实现工业无线通信和现场总线集成和互连互操作中的关键问题，即设备、用户应用对象和通信协议各层之间的互操作。提出了以协议转换方式系统实现互操作的理论方法。协议转换可以根据通信协议的异同在不同的通信层次通过协议级、服务级和混合的方式实现，为互操作的实现提供理论和实现基础。 然后，分析了工业无线通信和现场总线集成和互连的通信性能问题，根据自动化系统通信的特点和要求，针对预定周期性通信提出了系统通信调度映射、通信关系和服务转换、资源预留和通信转发和响应方法，对非周期通信提出了优先级及其映射机制、通信关系和服务转换、通信转发和响应以及拥塞控制方法来保证通信的确定、实时和可靠性。 最后，将所提出的方法具体应用于WIA-PA和基金会现场总线的集成和互连，针对通信协议的具体特点，利用通信网关实现了两种协议最高层信息之间的互操作，实现了保证设备间不同通信任务性能的方法，满足了工业自动化系统的要求。

远程数据库访问系统客户／服务器体系结构模型的设计与实现

远程数据库访问（ＲＤＡ）是ＯＳＩ应用层一个特别应用服务元素（ＳＡＳＥ），是数据库基础标准，是构造分布数据库开放式体系结构的基础．本文遵照国际标准ＲＤＡ模型、服务、协议，研究并给出实现ＲＤＡ客户／服务器体系结构模型、方法与系统原型。