黄土丘陵区人工刺槐林土壤活性有机碳与碳库管理指数演变

土壤碳库管理指数是表征土壤碳变化的重要量化指标,研究黄土丘陵区人工刺槐林土壤活性有机碳与碳库管理指数的变化过程对认识该地区生态恢复过程中土壤质量的演变及其效果评价具有重要意义。【方法】采用时空互代法,以典型侵蚀环境纸坊沟流域生态恢复过程中不同年限的人工刺槐林为研究对象,选取坡耕地和天然侧柏林为参照,分析了植被恢复过程中土壤有机碳(TOC)、活性有机碳(LOC)、非活性有机碳(NLOC)及碳库管理指数(CPMI)的演变特征,并运用相关和回归分析方法对生态恢复过程中碳库各组分和恢复年限进行拟合。【结果】营造刺槐林可以显著增加土壤碳库各组分含量,并随恢复年限呈显著线性关系,50a时TOC、LOC、NLOC和碳库指数(CPI)分别较坡耕地增加271%、174%、467%和271%,其中NLOC增加速率略高于LOC,表明植被恢复增加的土壤碳素绝大多数以非活性形态贮存起来,而为了满足生物生长所必须的活性物质来源,土壤碳库必须维持一定的活度状态来满足碳素的动态转化平衡,碳库管理指数在营造刺槐林初期显著降低,随后先增加后降低,与刺槐林生长特性密切相关;但与天然林相比差距仍然较大,恢复50a时TOC、LOC和NLOC仅...

土地利用方式对土壤有机质及其碳库管理指数的影响

采用野外调查和室内分析的方式对子午岭不同土地利用方式下,土壤有机质、3种活性有机质及其碳库管理指数(CMI)进行了研究,结果表明,土壤有机质、3种活性土壤有机质含量均随土层的加深逐渐降低,在土壤剖面基本表现为林地、撂荒未翻耕地>撂荒翻耕地>农用地.同一土层,3种土壤活性有机质含量及其有效率表现为低活性有机质>中活性有机质>高活性有机质.不同利用方式下,活性有机质有效率随有机质活性增强,呈现撂荒未翻耕地>林地>撂荒翻耕地>农用地的趋势.不同利用方式之间的CMI的差异随有机质活性的增强而增大,且影响深度也逐渐加深.在0~30cm土层内,林地3种活性有机质的CMI高于撂荒翻耕地和农用地;而在30cm之下土层,3种利用方式低活性有机质的CMI相差不大,但中活性有机质和高活性有机质的CMI表现为林地>撂荒翻耕地>农用地.3种活性土壤有机质与其他生物化学性质之间均表现为显著或极显著相关关系,表明活性有机质可以指示土地利用方式对土壤有机质和CMI的影响.

侵蚀环境人工灌木林土壤活性有机碳与碳库管理指数演变

采用时空互代法,以黄土丘陵区纸坊沟流域生态恢复过程中不同年限的人工柠条和沙棘林为研究对象,选取坡耕地和天然侧柏林为对照,分析了植被恢复过程中土壤有机碳(TOC)、活性有机碳(LOC)、非活性有机碳(NLOC)及碳库管理指数的演变特征。结果表明,侵蚀环境下的坡耕地由于人为干扰,土壤碳库含量偏低,退耕营造柠条林可以显著增加土壤碳库各组分含量,并随恢复年限呈显著线性关系,25 a时TOC、LOC和NLOC分别较坡耕地增加271%、144%和204%,仅为侧柏林的32%、30%和29%,碳库指数和碳库管理指数较坡耕地明显增加,增幅分别达到144%和108%,仅为侧柏林的28%和43%;不同灌木林对土壤碳库管理的改善作用不同,恢复年限相同的沙棘林土壤碳库组分含量和管理指数明显高于柠条林,坡耕地营造灌木林后土壤经营和管理水平得到了显著改善,土壤系统向着良性方向转变。相关性分析表明有机碳、活性有机碳、非活性有机碳、碳库指数、碳库管理指数与土壤主要肥力因子相关性极其密切,可以作为反映生态恢复过程土壤质量演变的指标。

不同植被恢复模式对黄土丘陵区土壤碳库及其管理指数的影响

为了解侵蚀环境下植被恢复对土壤活性有机碳及碳库管理指数的影响,以典型侵蚀环境黄土丘陵区纸坊沟流域生态恢复30 a植被长期定位试验点为研究对象,选取坡耕地为参照,分析植被恢复过程中土壤碳库各组分和碳库管理指数的演变特征。结果表明,侵蚀环境下植被恢复后土壤碳库各组分含量都得到显著改善,有机碳、活性有机碳和非活性有机碳含量增幅分别为109%~238%,194%~212%和65%~149%,增加速度非活性有机碳>有机碳>活性有机碳。碳库指数和碳库管理指数较坡耕地明显增加,增幅分别为15%~659%和6.5%~414%,说明土壤经营和管理水平较坡耕地得到了显著改善,土壤系统向着良性方向转变。相关性分析表明有机碳、活性有机碳、非活性有机碳、碳库指数、碳库管理指数与土壤主要肥力因子相关性及其密切,可以作为反映生态恢复过程土壤质量演变的指标。不同植被恢复措施可以显著改善土壤碳库含量,增加土壤碳库管理水平,但改善作用不同,总体来说混交林的效果最好,其次为纯林,最后为荒草地,因此在该地区要通过人工促进生态恢复,应以营造混交林为主,纯林为辅的恢复模式。

Low loss waveguide in Nd3+-doped silicate glass fabricated by carbon ion implantation

Low loss index enhanced planar waveguides in Nd3+-doped silicate glass were fabricated by 3.0 MeV C+ ion implantation. The enhancement of the refractive index confined the light propagating in the waveguide. The prism-coupling method was used to measure dark modes in the waveguide. The effective refractive indices of the waveguide were obtained based on the dark modes. The moving fiber method was applied to measure the waveguide propagation loss. Loss measured in non-annealed samples is about 0.6 dB/cm. And the waveguide mode optical near-field output at 633 nm was presented. (c) 2005 Elsevier B.V. All rights reserved.

Property studies of optical waveguide formed by 6.0 MeV carbon ion implantation into Nd : silicate glass

Nd:silicate glass was implanted at room temperature by 6.0 MeV C3+ ions with a dose of 2.0 x 10(15) ions cm(-2). A waveguide with thickness of about 6.3 mu m was formed. The prism-coupling method was used to observe the dark modes of the waveguide at 633 nm and 1539 nm, respectively. There are three dark modes at 633 nm, of which one is the enhanced-index mode. The propagation loss of the enhanced-index mode in the waveguide measured at 633 nm is 0.42 dB cm(-1) after annealing at 217 degrees C for 35 min. The reflectivity calculation method was applied to simulate the refractive index profiles in the waveguide. The mode optical near-field output at 633 nm was presented.

Copolymerization of carbon dioxide and cyclohexene oxide catalyzed by aluminum porphyrin-quaternary ammonium salt in the presence of bulky lewis acid

Chloro( 5,10,15,20-tetraphenyl-porphyrinato)-aluminum/tetraethylammonium bromide ( Et4NBr) in combination with bulky Lewis acid was used for the copolymerization of CO2 and cyclohexene oxide ( CHO). Bulky Lewis acid having substituents at the ortho positions of the phenolate ligands, like methylaluminum bis(2,6-di-tert-butyl-4-methylphenolate), significantly shortened the induction period and raised the catalytic activity, the corresponding turnover frequency reached 44.9 h(-1) in 9 h, which was 23.8% higher than that from ( TPP)AlCl/Et4NBr binary catalyst. The resulting polycarbonate has carbonate linkage over 93% with number average molecular weight of ( 4.5-6.5) x 10(3) and polydispersity index below 1.10.

Carbon nanotubes selective destabilization of duplex and triplex DNA and inducing B-A transition in solution

Single-walled carbon nanotubes (SWNTs) have been considered as the leading candidate for nano-device applications ranging from gene therapy and novel drug delivery to membrane separations. The miniaturization of DNA-nanotube devices for biological applications requires fully understanding DNA-nanotube interaction mechanism. We report here, for the first time, that DNA destabilization and conformational transition induced by SWNTs are sequence-dependent. Contrasting changes for SWNTs binding to poly[dGdC]:poly[dGdC] and poly[dAdT]:poly[dAdT] were observed. For GC homopolymer, DNA melting temperature was decreased 40 degrees C by SWNTs but no change for AT-DNA. SWNTs can induce B-A transition for GC-DNA but AT-DNA resisted the transition. Our circular dichroism, competitive binding assay and triplex destabilization studies provide direct evidence that SWNTs induce DNA B-A transition in solution and they bind to the DNA major groove with GC preference.

Studies on the PTC/NTC effect of carbon black filled low density polyethylene composites

The positive temperature coefficient (PTC) and negative temperature coefficient (NTC) effect of carbon black (CB) filled low density polyethylene (LDPE) composites was studied using electrical resistivity spectra, DSC, tensile mechanical analysis (TMA) and small-angle X-ray scattering (SAXS) techniques. The three LDPEs used have a similar crystallinity and different melting index (MI). The experimental results indicate that the CB has no significant effect on the crystallinity and the long spacing of crystalline domains of LDPE. Based upon the TMA and dynamic elastic modulus spectra, it can be concluded that the PTC effect is related to the thermal expansion of the polymer matrix, and the NTC effect is caused by a decrease of the elastic modulus of the polymer at high temperatures. The NTC effect can be reduced by enhancing either the elastic modulus or the interaction between carbon black and matrix. (C) 1997 Elsevier Science Ltd.

Feeding habits of Calanus sinicus (Crustacea : Copepoda) during spring and autumn in the Bohai Sea studied with the herbivore index

Pigment ingestion rate (PIR) and egg production rate (EPR) of the dominant copepod Calanus sinicus, as well as chlorophyll-a concentration and phytoplankton assemblages were measured in the Bohai Sea, North China in June 1997, October 1998 and May 1999. A herbivore index (H) was also calculated as the carbon specific ratio of PIR and EPR, in order to investigate its feeding habits in the spring and autumn phytoplankton bloom respectively. On average, chlorophyll-a concentration was relatively similar (1-1.34 mg m(-3)) in the three cruises, but PIR was quite different. It was 3.24 mu g C female(-1) d(-1) in October, equivalent to one half of the PIR for June and one third of the PIR for May. Average EPR was highest in May, and quite similar during the other two months. According to H values, herbivorous feeding contributed 100% of the egg production of C. sinicus in June, 82.5% in May, but only 47.8% in October. It is possible that omnivorous feeding of C. sinicus in October was induced by a prevalence of large-sized diatoms and sufficient non-phytoplankton food resources during the autumn bloom period.