Stiction and Anti-Stiction in Mems and Nems

Stiction in microelectromechanical systems (MEMS) has been a major failure mode ever since the advent of surface micromachining in the 80s of the last century due to large surface-area-to-volume ratio. Even now when solutions to this problem are emerging, such as self-assembled monolayer (SAM) and other measures, stiction remains one of the most catastrophic failure modes in MEMS. A review is presented in this paper on stiction and anti-stiction in MEMS and nanoelectromechanical systems (NEMS). First, some new experimental observations of stiction in radio frequency (RF) MEMS switch and micromachined accelerometers are presented. Second, some criteria for stiction of microstructures in MEMS and NEMS due to surface forces (such as capillary, electrostatic, van der Waals, Casimir forces, etc.) are reviewed. The influence of surface roughness and environmental conditions (relative humidity and temperature) on stiction are also discussed. As hydrophobic films, the self-assembled monolayers (SAMs) turn out able to prevent release-related stiction effectively. The anti-stiction of SAMs in MEMS is reviewed in the last part.

Realization of highly uniform self-assembled InAs quantum wires by the strain compensating technique

Self-assembled InAs quantum wires (QWRs) on InP(001) substrate have been grown by molecular-beam epitaxy, using a strain compensating technique. Atom force microscope, Transmission electron microscopy, and high-resolution x-ray diffraction are used to characterize their structural properties. We proposed that, by carefully adjusting composition of InAlGaAs buffer layer and strain compensating spacer layers, stacked QWRs with high uniformity could be achieved. In addition, the formation mechanism and vertical anti-correlation of QWRs are also discussed. (c) 2005 American Institute of Physics.

基于光时域反射计的全分布式光纤漏油传感器

报道了一种基于光时域反射计的全分布式光纤漏油传感器,该传感器能实现分布式实时监测长输油管道,及时发现小型的漏油事件.传感器沿管道铺设,利用光时域反射计实时测量光纤在长度上的损耗变化特点,及时发现并定位管道上的每一处泄漏事件.模拟实验证明了其实际操作的可行性,长期使用的稳定性和各种抗干扰性,能在15min内发现并定位漏油事件,且定位准确度为3m.

野生猕猴应激与抗应激的研究

：本文以野生猕猴为实验对象，以血清皮质 醇含量为指标，研究了野生猕猴 被捕获与给予氯丙嗪、Vc等药物后上述指标的变化。结果 表明：(1)野生猕猴在被捕获 后的1～2周内，血清皮质醇一直维持在一个高水平状态(24.7 8±0.20μg/dl，24.88 ±0.58μg/dl)；(2)氯丙嗪可使动物行为处于一种安静状态， 但 并不降低血清皮质醇水 平(28.73±6.16μg/dl)，(3)Vc可改善动物的精神状态，使血清 皮质醇略低(21.00 ±2.90μg/dl)(P＞0.05)，(4)氯丙嗪和Vc合用后，血清皮质 醇与单独使用氯丙嗪无明显 差异(28.07±4.45μg/dl)。

Self-assembled quantum dots, wires and quantum-dot lasers

Molecular beam epitaxy-grown self-assembled In(Ga)As/GaAs and InAs/InAlAs/InP quantum dots (QDs) and quantum wires (QWRs) have been studied. By adjusting growth conditions, surprising alignment. preferential elongation, and pronounced sequential coalescence of dots and wires under specific condition are realized. The lateral ordering of QDs and the vertical anti-correlation of QWRs are theoretically discussed. Room-temperature (RT) continuous-wave (CW) lasing at the wavelength of 960 nm with output power of 3.6 W from both uncoated facets is achieved fi-om vertical coupled InAs/GaAs QDs ensemble. The RT threshold current density is 218 A/cm(2). A RT CW output power of 0.6 W/facet ensures at least 3570 h lasing (only drops 0.83 dB). (C) 2001 Elsevier Science B.V, All rights reserved.

黄土丘陵沟壑区人工林地的土壤抗蚀性评价

以延安、安塞、吴旗的人工刺槐林、柠条林为研究对象,选取同一地区的自然恢复草地和坡耕地为对照,通过对5个表征土壤抗蚀性的指标即>0.25 mm水稳性团粒含量、>0.5 mm水稳性团粒含量、平均重量直径、团聚状况和团聚度的比较分析,对人工刺槐林、人工柠条林相对于自然恢复草地和坡耕地改善土壤抗蚀性的效果进行了评价,同时分析了不同林龄人工林土壤抗蚀性的变化。研究表明,人工林地相对于坡耕地,显著提高了土壤抗蚀性,但不及自然恢复草地,尤其在安塞和吴旗表现更明显;随着林龄的增长,人工林地土壤抗蚀性能增强,并趋于稳定。并通过对样地的聚类分析,也得出与上述相似的结果。综合分析表明,封禁条件下的植被自然恢复是黄土丘陵沟壑区比较适宜的植被恢复方式和控制土壤侵蚀的有效措施。

2种离子固化剂改善黄土抗剪强度和抗渗性的研究

为了探讨CONAID和LUKANG 2种离子固化剂的固土性能及其影响因素,对不同固化剂掺量、养护龄期、压实度和含水率的固化黄土进行了直剪试验和渗透试验。研究结果表明:随着固化剂掺量、养护龄期和压实度增大,2种固化土的内摩擦角和黏聚力呈上升趋势,渗透系数呈下降趋势,且规律比较接近。其中LUKANG固化剂对黄土抗剪强度和抗渗性的改善效果优于CONAID固化剂。建议在施工过程中选用LUKANG固化剂,掺量宜取0.01%。为了达到更好的抗剪和抗渗效果,应尽量延长固化土的养护龄期,增加压实度。

Self-assembled quantum dots, wires and quantum-dot lasers

Molecular beam epitaxy-grown self-assembled In(Ga)As/GaAs and InAs/InAlAs/InP quantum dots (QDs) and quantum wires (QWRs) have been studied. By adjusting growth conditions, surprising alignment. preferential elongation, and pronounced sequential coalescence of dots and wires under specific condition are realized. The lateral ordering of QDs and the vertical anti-correlation of QWRs are theoretically discussed. Room-temperature (RT) continuous-wave (CW) lasing at the wavelength of 960 nm with output power of 3.6 W from both uncoated facets is achieved fi-om vertical coupled InAs/GaAs QDs ensemble. The RT threshold current density is 218 A/cm(2). A RT CW output power of 0.6 W/facet ensures at least 3570 h lasing (only drops 0.83 dB). (C) 2001 Elsevier Science B.V, All rights reserved.

黄土丘陵林区开垦地土壤抗冲性的时间变化研究

以黄土丘陵林区 10a径流泥沙观测资料为基础 ,进行土壤抗冲试验 ,分析了林地及其开垦后不同年限土壤的抗冲性能。结果表明 ,林地具有很强的抗冲性能 ,一旦被开垦后 ,随侵蚀年限的增长 ,土壤的抗冲性呈减弱趋势 ,在 3L/min流量下 ,土壤冲刷量从侵蚀 1a的 4.0 1g/L增大到侵蚀 10a的 2 5 .5 1g/L ,加剧了土壤侵蚀发展。相关分析表明 ,土壤的抗剪强度对抗冲性影响最大 ,其次为水稳性团粒和有机质含量。因此 ,退耕还林、恢复和重建植被 ,改善土壤侵蚀环境 ,提高土壤抗冲性 ,能有效地防治土壤侵蚀。

聚三氟氯乙烯氟碳涂料在紫铜表面的耐蚀阻垢性能

面临世界上严重的淡水资源紧缺，海水淡化和海水利用技术是可行的解决方案之一。铜及其合金因其良好的机械性能、可成型性、导热性以及在海洋环境中优良的耐腐蚀性能成为海水冷凝器的首选材料，但由于海水成分的多样性和复杂性，对铜及其合金还是造成了一定的腐蚀和结垢问题，因而制约着海水利用技术的发展和应用。 氟碳涂料是一种新型的高科技功能性涂料，其聚合物分子间的作用力低，决定着它具有非常低的表面自由能。因此，氟碳涂料具有不可润湿性、防沾污性和自润滑性。而它本身所特有的螺旋结构则决定了它具有一般涂料所难以比拟的优异的物理性能，在防腐蚀领域特别是复杂苛刻的海洋环境中有着广阔的应用前景。 本文选择了性能优异的聚三氟氯乙烯这种氟碳涂料，涂覆在紫铜上，研究了其阻垢能力和耐海水腐蚀性能。实验首先是通过配制超硬度的实验用水，测试了不同温度下，试样上所结水垢的量，然后通过SEM-EDX做了样品表面成分分析，结果表明涂料在样品表面附着均匀、致密，与基底金属结合紧密，可以有效地防止水垢的生成，并且还防止了金属铜的腐蚀问题。为进一步研究涂层的耐蚀性能，做了中性盐雾试验和电化学实验。在经过3000h的盐雾试验后，样品表面几乎没有变化，腐蚀增重率很小，金属腐蚀可以忽略不计；在为期90d的交流阻抗实验过程中，刚开始时阻抗弧不稳定，到第十天达到最大，然后慢慢减小，但始终为单弧容抗，只有一个时间常数。而且，在90d以后，极化电阻值仍然在10000Ω以上，因此，在实验期间，腐蚀介质不能到达涂层/基底金属界面，基底金属受到了良好的保护。

Unloading characteristics of anti-plane shear crack in softening materials

The local characteristics of the anti-plane shear stress and strain field are determined for a material where the stress increases linearly with strain up to a limit and then softens nonlinearly. Two unloading models are considered such that the unloading path always returns to the origin while the other assumes the unloading modulus to be that of the initial shear modulus. As the applied shear increases, an unloading zone is found to prevail between a zone in which the material softens and another zone in which the material is linear-elastic even though the crack does not propagate. The divisions of these zones are displayed graphically.

The Mitogenic and Anti-Apoptotic Activity of Tumor Conditioned Medium on Endothelium

This study was designed to observe the effect of tumor conditioned medium (TCM) on the proliferation and apoptosis of human umbilical vein endothelial cells (HUVECs). HUVECs were exposed to TCM from breast carcinoma cell line MDA-MB-231, then we measured their proliferation, apoptosis and cell cycle distribution by MTT and flow cytometery (FCM). Following the stimulation of TCM, HUVECs showed higher pro-mitogenic and anti-apoptotic ability than did the negative control group (ECGF-free medium with 20% FBS), but a similar ability to the positive control group (medium with ECGF and 20% FBS). From these results, we can conclude that breast carcinoma cell line MDA-MB-231 could secret soluble pro-angiogenic factors that induce HUVEC angiogenic switching, including cell cycle progression, proliferation and growth. The role and character of these factors remain to be further studied.

Imaging properties of coherent anti-Stokes Raman scattering microscope

The coherent anti-Stokes Raman scattering (CARS) microscope with the combination of confocal and CARS techniques is a remarkable alternative for imaging chemical or biological specimens that neither fluoresce nor tolerate labelling. CARS is a nonlinear optical process, the imaging properties of CARS microscopy will be very different from the conventional confocal microscope. In this paper, the intensity distribution and the polarization property of the optical field near the focus was calculated. By using the Green function, the precise analytic solution to the wave equation of a Hertzian dipole source was obtained. We found that the intensity distributions vary considerably with the different experimental configurations and the different specimen shapes. So the conventional description of microscope (e.g. the point spread function) will fail to describe the imaging properties of the CARS microscope.

The intensity distributions of collected signals in coherent anti-Stokes Raman scattering microscopy

Coherent anti-Stokes Raman scattering (CARS) microscopy with the combining of confocal and CARS techniques is a remarkable alternative for imaging chemical or biological specimens that neither fluoresce nor tolerate labeling. The CARS is a nonlinear optical process, the imaging properties of CARS microscopy will be very different from the conventional confocal microscopy. In this paper, we calculated the propagation of CARS signals by using the wave equation in medium and the slowly varying envelope approximation (SVEA), and find that the intensity angular distributions vary considerably with the different experimental configurations and the different specimen shapes. So the conventional description of microscopy (e.g.. the point spread function) will fail to descript the imaging properties of CARS microscopy. (c) 2004 Elsevier B.V. All rights reserved.