智能梁振动主动控制的广义位置函数法

研究了具有离散分布式压电传感器、执行器的智能梁,在外加电场作用下振动模态与外加电场的之间耦合关系,提出了智能梁主动控制的一种新的计算方法——广义位置函数法,并引入执行器位置函数的级数展开式,简化了计算。结果表明,智能梁振动控制效果与压电执行器长度、数目以及位置有密切的关系。

爆炸处理时裂纹动态扩展行为的研究

本文研究爆炸处理时裂纹在应力波作用下的动态扩展行为,分别讨论了入射波、反射波和应力波持续时间的作用,并根据线弹性断裂力学复合型准则和动态断裂准则对裂纹的扩展进行了分析,作者建议用吸能块的办法控制爆炸处理时裂纹的扩展,并作了实验验证。

对二维编织复合材料弹性、热、强度及失效分析模型的评论

纺织结构作为聚合物复合材料的增强相在许多工业应用中变得非常重要,例如在航海与航空领域中,由于其刚度及强度与其重量的高比值而倍受炊迎.由于工业及工程应用的需求,研究纺织复合材料的弹性性质及失效行为变得非常重要.这篇文章重点评论了关于二维编织复合材料弹性、热、强度及失效分析的数值及解析模型,给出了主要的建模技术及方法.同时也简单给出了编织复合材料从最初的一维模型到最近三维模型的发展.本文的目的不是对所论模型的数学方法进行详细分析,而是告知研究者关于先前工作的主要思想.这篇评论总共引用了122篇文献.

亚微米氮化钛膜的纳米压痕和划痕测定

采用等离子电弧沉积的方法，分别在GT35和40CrNiMo钢上沉积厚约为0.5μm的氮化钛(TiN)膜。为了筛选基材，采用纳米压痕和划痕技术，评价膜基界面结合和固体润滑效果。纳米压痕结果，GT35，40CrNiMo和TiN的纳米硬度/弹性模量的典型值分别约为11.5 GPa/330GPa, 6.0 GPa/210GPa, 30GPa/450GPa。纳米划痕结果，GT35有较理想的膜基结合能力；GT35，40CrNiMo，TiN及其有机膜的磨擦系数分别约为0.25，0.45，0.15, 0.10。同40CrNiMo相比，GT35是较为理想的基体材料。纳米压痕和划痕技术能提供丰富的近表面的弹塑性变形、断裂和磨擦等的信息，是评价亚微米薄膜力学性能的有效手段。

Acceleration of initially moving electrons by a copropagation intense laser pulse

Acceleration of an initially moving electron by a copropagation ultra-short ultra-intense laser pulse in vacuum is studied. It is shown that when appropriate laser pulse parameters and focusing conditions are imposed, the acceleration of electron by ascending front of laser pulse can be much stronger compared to the deceleration by descending part. Consequently, the electron can obtain significantly high net energy gain. We also report the results of the new scheme that enables a second-step acceleration of electron using laser pulses of peak intensity in the range of 10(19)-10(20) W mu m(2)/cm(2). In the first step the electron acceleration from rest is limited to energies of a few MeV, while in the second step the electron acceleration can be considerably enhanced to about 100 MeV energy.

A novel method to design flexible URAs

Aperture patterns play a vital role in coded aperture imaging ( CAI) applications. In recent years, many approaches were presented to design optimum or near-optimum aperture patterns. Uniformly redundant arrays (URAs) are, undoubtedly, the most successful for constant sidelobe of their periodic autocorrelation function. Unfortunately, the existing methods can only be used to design URAs with a limited number of array sizes and fixed autocorrelation sidelobe-to-peak ratios. In this paper, we present a novel method to design more flexible URAs. Our approach is based on a searching program driven by DIRECT, a global optimization algorithm. We transform the design question to a mathematical model, based on the DIRECT algorithm, which is advantageous for computer implementation. By changing determinative conditions, we obtain two kinds of types of URAs, including the filled URAs which can be constructed by existing methods and the sparse URAs which have never been mentioned by other authors as far as we know. Finally, we carry out an experiment to demonstrate the imaging performance of the sparse URAs.

GdFeCo非晶薄膜磁温度特性

本文以分子场理论为依据,通过实验数据的拟合和分析计算,计算了GdFeCo非晶薄膜饱和磁化强度、交换常数、磁各向异性常数的温度特性,并分析了薄膜成分变化对补偿温度、居里温度等的影响规律,为GdFeCo薄膜在新型磁光存储技术中的应用提供了理论依据。

一种核黄素敏化的宽带全息记录材料

制备了一种核黄素敏化的以聚乙烯醇为基质的新型全息存储材料，并研究了材料的全息特性,用Ar^＋激光器激发的488nm的蓝光对材料曝光，结果表明该材料具有较高的衍射效率和曝光灵敏度，衍射效率高达53％，灵敏度为3．3cm^2／J，折射率调制度为4．5×10^-4研究了材料的透过率与随时间和入射角度变化的关系，说明在曝光记录过程中有噪音光栅生成．在存储介质膜中存储了全息图像，再现图像较为清晰，说明该材料适合用作高密度全息存储介质．