118 resultados para 467
em Chinese Academy of Sciences Institutional Repositories Grid Portal
Resumo:
从试井测试技术与方法、试井理论模型、试井理论模型求解技术、试井资料的分析解释方法以及试井分析成果的应用 5个方面概述了试井分析理论和应用的发展状况。对试井分析模型和分析方法进行了归类 ,给出了弱非均质油藏、规律性非均质油藏和任意非均质油藏的概念范畴 ,指出了试井技术的发展趋势和方向。
Resumo:
In this paper, we studied the role of vertical component Of Surface tension of a water droplet on the deformation of membranes and microcantilevers (MCLs) widely used in lab-on-a-chip and micro-and nano-electromechanical system (MEMS/NEMS). Firstly, a membrane made of a rubber-like material, poly(dimethylsiloxane) (PDMS), was considered. The deformation was investigated using the Mooney-Rivlin (MR) model and the linear elastic constitutive relation, respectively. By comparison between the numerical solutions with two different models, we found that the simple linear elastic model is accurate enough to describe such kind of problem, which would be quite convenient for engineering applications. Furthermore, based on small-deflection beam theory, the effect of a liquid droplet on the deflection of a MCL was also studied. The free-end deflection of the MCL was investigated by considering different cases like a cylindrical droplet, a spherical droplet centered on the MCL and a spherical droplet arbitrarily positioned on the MCL. Numerical simulations demonstrated that the deflection might not be neglected, and showed good agreement with our theoretical analyses. (C) 2008 Elsevier Inc. All rights reserved.
Resumo:
针对激光聚焦爆炸的电磁-热力耦合效应,在宏观尺度上,把描述激光电磁波散射和传播的Maxwell方程和高温高压气动流场的Euler方程结合起米,利用热力学状态方程(EOS)和电离平衡方程(Saha方程)并通过理论建模和数值仿真,研究和揭示激光聚焦爆炸效应及激光支持吸收波(LSC/LSD)的产生和演化、以及相关的反冲压力和动量耦合等相互作用机制.
Resumo:
利用10倍的显微物镜将近红外飞秒激光脉冲汇聚到宽带隙半导体材料6HSiC的前表面,研究样品的烧蚀及诱导微细结构。用扫描电镜(Scanning electron microscope,SEM)及光学显微镜测量烧蚀斑。利用烧蚀面积与激光脉冲能量的关系确定SiC的烧蚀阈值。给出了SiC样品的烧蚀阈值与飞秒激光波长的依赖关系。实验结果表明,可见光区随波长增加,烧蚀阈值从0.29J/cm^2增加到0.67J/cm^2;而在近红外区,SiC的烧蚀阈值为0.70J/cm^2左右,基本上不随激光波长变化而改变。结合计算结
Resumo:
Non-polar (1 (1) over bar 00)m-plane ZnO thin film has been prepared on gamma-LiAlO2 (100)substrate via the low pressure metal organic chemical vapor deposition. Obvious intensity variation of the E-2 mode in the polarized Raman spectra and the absorption edge shift in the polarized optical transmission spectra indicate that the m-plane film exhibits optical anisotropy, which have applications in certain optical devices, such as the UV modulator and polarization-dependent beam switch. From the atomic force microscopy images, highly-oriented uniform-sized grains of rectangular shape were observed. (c) 2008 Elsevier B.V. All rights reserved.
Resumo:
The 2 at.% Sm:GdVO4 crystal was grown by the Czochralski method. The segregation coefficient of Sm3+ ion in this crystal is 0.98. The crystal structure of the Sm:GdVO4 crystal was determined by X-ray diffraction analysis. Judd-Ofelt theory was used to calculate the intensity parameters (Omega(i)), the spontaneous emission probability, the luminary branching ratio and the radiative lifetime of the state (4)G(5/2). The stimulated emission cross-sections at 567, 604 and 646 nm are calculated to be 5.92 x 10(-21), 7.62 x 10(-21) and 5.88 x 10(-21) cm(2), respectively. The emission cross-section at 604 nm is 4.4 times lager than that in Sm: YAP at 607 nm. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
Nanocrystalline Zn0.95-xCo0.05AlxO (x=0, 0.01, 0.05) diluted magnetic semiconductors have been synthesized by an auto-combustion method. X-ray diffraction measurements indicated that Al-doped Zn0.95Co0.05O samples had the pure wurtzite structure. X-ray absorption spectroscopy, high-resolution transmission electron microscope, energy dispersive spectrometer and Co 2p core-level photoemission spectroscope analyses indicated that Co2+ substituted for Zn2+ without forming any secondary phases or impurities. Resistance measurements showed that the resistance values of Co and Al codoped samples were still so large in the giga magnitude. Magnetic investigations showed that nanocrystalline Al-doped Zn0.95Co0.05O samples had no indication of room temperature ferromagnetism. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
The basic elements of Bragg-Fresnel multilayer optics are multilayer gratings. In this paper, the fabrication process for the simplest Bragg-Fresnel multilayer optics is given; the diffraction measurements at 8-keV x rays of multilayer gratings are presented; and the measurement results in the diffraction spectrum are analyzed and discussed in detail. (C) 1996 Society of Photo-Optical Instrumentation Engineers.