Biochemical characterization of selenium-containing catalytic antibody as a cytosolic glutathione peroxidase mimic

A selenium-containing catalytic antibody (Se-4A4), prepared by converting reactive serine residues of a monoclonal antibody (4A4) raised against a GSH derivative into selenocysteines, acts as a mimic of cytosolic glutathione peroxidase (cGPX). To clarify the mechanism of action of this catalytic antibody, detailed studies on kinetic behaviour and biological activity were carried out. A rate of acceleration (k(cat)/K-m/k(uncat)) 10(7)-fold that of the uncatalytic reaction is observed. Under similar conditions, the turnover number (k(cat)) of Se-4A4 is 42% of that of the natural rabbit liver cGPX. The Se-4A4 reaction involves a Ping Pong mechanism, which is the same as that of the natural cGPX. The selenocysteine residue is located in the binding site of the antibody and is shown to be crucial for this activity. Of the thiol compounds tested, only GSH is able to serve as substrate for Se-4A4. It was demonstrated, using the free-radical-damage system (hypoxanthine/xanthine oxidase) of cardiac mitochondria, that Se-4A4 can protect mitochondria from free-radical damage at least 10(4)-fold more effectively than the natural cGPX.

黄龙世界自然遗产地岷江冷杉原始林群落结构与植物多样性：生境差异性研究

黄龙世界自然遗产地岷江冷杉林(Abies faxoniana)生境类型多样，群落结构复杂，群落植物种类组成多样性丰富。揭示不同生境的生物多样性及其差异是认识生物多样性格局、形成及维持机制的前提和进行多样性保育的基础。本文采用样方法对黄龙钙化滩生境、阴坡非钙化生境及半阳坡非钙化生境的岷江冷杉原始林植物群落结构及植物多样性进行了研究。结果表明： 黄龙岷江冷杉林具有明显的复层异龄结构，垂直结构明显，乔木、灌木、草本、苔藓层次分明。共发现高等植物386 种，其中维管植物46 科103 属163 种，苔藓植38 科83 属物223 种。各层片结构及物种组成如下: (1)钙化滩生境、阴坡非钙化生境、半阳坡非钙化生境分别发现乔木18 种、13种、8 种。乔木层均可分为两个亚层，第一亚层优势种均为岷江冷杉，第二亚层主要为岷江冷杉异龄树或其它大高位芽物种。钙化滩生境第一亚层除优势种岷江冷杉外混生有巴山冷杉(Abies fargesii)、粗枝云杉(Picea asperata)以及阔叶树种白桦(Betula platyphylla)等，第二亚层主要为岷江冷杉异龄树；阴坡非钙化生境第一亚层除优势种岷江冷杉外间有巴山冷杉和白桦，第二亚层物种主要为川滇长尾槭(Acer caudatum var. prattii)；半阳坡非钙化生境第一亚层除优势种岷江冷杉外混生有巴山冷杉，第二亚层主要为岷江冷杉异龄树。依乔木层优势种的差异，钙化滩生境及半阳坡非钙化生境为岷江冷杉纯林，阴坡非钙化生境为岷江冷杉－川滇长尾槭混交林。不同生境乔木层郁闭度、乔木密度、树高结构、直径结构均存在差异。 (2)钙化滩生境发现灌木41 种，平均盖度为18.49±1.72(％)，平均高度为52.12±4.45(cm)，优势种为直穗小檗(Berberis dasystachya)；阴坡非钙化生境发现灌木30 种，平均盖度为29.33±2.56 (％)，平均高度为119.55±8.01 (cm)，优势种为箭竹 (Fargesia spathacea) 、唐古特忍冬(Lonicera tangutica) 和袋花忍冬(Lonicera saccata)；半阳坡非钙化生境发现灌木29 种，平均盖度为31.35±1.93 (％)，平均高度为107.55±4.24 (cm)，优势种为箭竹(Fargesia spathacea)。不同生境灌木层结构和物种组成多样性差异显著，钙化滩生境的灌木盖度、高度总体上较非钙化的坡地生境低, 钙化滩生境灌木以小型叶的落叶灌木为主，沟两侧非钙化的坡地生境上则发育了丰富箭竹。 (3)钙化滩生境发现草本46 种，平均盖度为7.18±0.79 (％)，平均高度为5.04±0.26(cm)，以山酢浆草(Oxalis griffithii)为优势种；阴坡非钙化生境发现草本物种71 种，平均盖度达29.04±2.31(％)，平均高度为9.08±0.52(cm)，以钝叶楼梯草(Elatostema obtusum)、山酢浆草为优势种；半阳坡非钙化生境草本物种50 种，平均盖度为以8.79±0.82(％)，平均高度为7.67±0.43 (cm)，以扇叶铁线蕨(Adiantum flabellulatum)、双花堇菜(Viola biflora)、华中蛾眉蕨(Lunathyrium shennongense)、山酢浆草为优势种。阴坡非钙化生境草本层片发育良好，多样性最为丰富，盖度和物种丰富度均显著高于钙化滩生境和半阳坡非钙化生境。 (4)钙化滩生境发现苔藓物种140 种，平均盖度达84.25±1.30 (％)，以仰叶星塔藓(Hylocomiastrum umbratum) 等大型藓类为优势种；阴坡非钙化生境发现苔藓物种115 种，平均盖度为79.29±1.64 (％)，以刺叶提灯藓(Mnium spinosum)、大羽藓(Thuidium cymbifolium)、毛尖燕尾藓(Bryhnia trichomitra)等个体较小的物种为优势种；半阳坡非钙化生境发现苔藓物种91 种，平均盖度为60.64±1.93 (％)，也以刺叶提灯藓为优势种。 (5)钙化滩生境、阴坡非钙化生境、半阳坡非钙化生境的物种数分别为234 种、221 种、175 种。乔木层的Shannon-Wiener 指数分别为0.75 ±0.12、1.87±0.12、1.78±0.07（灌木层，0.44±0.08、1.71± 0.15、2.49±0.06；草本层，0.33±0.13、1.31±0.15 、2.15±0.08； 苔藓层1.30±0.11、2.08±0.04、1.73±0.11，）；Pielou 均匀度指数分别为0.45±0.05、0.29±0.06、0.28±0.08（灌木层，0.75±0.03、0.68±0.05、0.52±0.06；草本层，0.68±0.02、0.77±0.02、0.74±0.02；苔藓层，0.40±0.03、0.63±0.02、0.52±0.03）；Simpson's 优势度指数分别为0.63±0.06、0.78±0.04、0.83±0.07（灌木层，0.21±0.03、0.28±0.05、0.45±0.06；草本层，0.25±0.02、0.12±0.01、0.17±0.01；苔藓层，0.45±0.04、0.18±0.01、0.31±0.04）。三种生境间乔木层、草本层的Sorenson 群落相似性系数较低, 灌木层、苔藓层的的Sorenson 群落相似性系数较高。 综上所述，黄龙岷江冷杉林的群落结构、植物多样性在三种生境间存在差异性，这将意味着我们在进行黄龙世界自然遗产地的森林经营管理时要较多地关注岷江冷山林群落在不同生境中的差异性。 There were multiplex habitat types, complicated community structure and abundant species composition in the Huanglong World Natural Heritage Site. Uncovering the differences of biodiversity among different habitats was a precondition to understand the distribution, formation and sustaining mechanism of the biodiversity, and the foundation of biodiversity conservation. In the present study, using plenty of quadrants, we investigated the community structure and the biodiversity of the primitive Abies faxoniana forest in different habitats (travertine bottomland, semi-sunny-slope non-calcified habitat and shady-slope non-calcified habitat) in the Huanglong World Natural Heritage Site. The main results are as follows: All the primitive Abies faxoniana forests in the three habitats were uneven-aged with obvious vertical structure including tree layer, shrub layer, herb layer and bryophyte layer. A total of 386 higher plants including 163 vascular plant species (103 generic, 46 families) and 223 bryophyte species (83 generic, 38 families) were investigated. The structure and species composition of each layer are as follows: (1) There were 18, 13 and 8 tree species in travertine bottomland, shady-slope non-calcified habitat and semi-sunny-slope non-calcified habitat, respectively. The tree layers in all habitats can be divided into two clear sub-layers. The upper tree layers were dominated by Abies faxoniana, and the lower tree layers were dominated by uneven-aged Abies faxoniana or other phanerophytes species. There were Abies fargesii , Picea asperata and Betula platyphylla besides the dominated species (Abies faxoniana) in the upper tree layer in travertine bottomland, and the lower tree layers were dominated by uneven-aged Abies faxoniana; There were Abies fargesii and Betula platyphylla besides the dominated species (Abies faxoniana) in the upper tree layer in shady-slope non-calcified habitat, and the lower tree layers were dominated by Acer caudatum var. prattii; There was Abies fargesii besides the dominated species (Abies faxoniana) in the upper tree layer semi-sunny-slope non-calcified habitat, and the lower tree layers were dominated by uneven-aged Abies faxoniana. According to composition percentage of dominate species in tree layer, both the forest in travertine bottomland and in semi-sunny-slope non-calcified habitat could be ranked as pure forest, and the forest in shady-slope non-calcified habitat could be ranked as mingled forest. There were significant differences in crown density, plant density, height structure and diameter structure among the three habitats. (2) A total of 41 shrub species (average coverage 18.49±1.72％; average height 52.12±4.45 ㎝)were found in travertine bottomland, and the dominate species was Berberis dasystachya; A total of 30 shrub species (average coverage 29.33±2.56 ％;average height 119.55±8.01 ㎝)were found in shady-slope non-calcified habitat, and the dominate species was Fargesia spathacea, Lonicera tangutica and Lonicera saccata. A total of 29 shrub species (average coverage 31.35±1.93％; average height 107.55±4.24 ㎝) were found in semi-sunny-slope non-calcified habitat, and the dominate species was Fargesia spathacea. There were significant differences in structure and species diversity of the shrub layers among the three habitats. The coverage and height of shrub had lower value in travertine bottomland than in two non-calcified habitats. Moreover, travertine bottomland was dominated by deciduous shrub species with microphyll and non-calcified habitats developed abundant Fargesia spathacea species. (3) A total of 46 herb species (average coverage 7.18±0.79％;average height 5.04±0.26 ㎝)were found in travertine bottomland, and the dominate species was Oxalis griffithii; A total of 71 herb species (average coverage 29.04±2.31％;average height 9.08±0.52 ㎝)were found in shady-slope non-calcified habitat, and the dominate species was Elatostema obtusum and Oxalis griffithii. A total of 50 herb species (average coverage 8.79±0.82％;average height 7.67±0.43 ㎝) were found in semi-sunny-slope non-calcified habitat, and the dominate species was Adiantum flabellulatum, Viola biflora, Lunathyrium shennongense and Oxalis griffithii. Herb layers developed well in shady-slope non-calcified habitat and had the higher species richness and coverage than travertine bottomland and semi-sunny-slope non-calcified habitat. (4) A total of 140 bryophyte species (average coverage 84.25±1.30％)were found in travertine bottomland, and the dominate species was big bryophyte species such as Hylocomiastrum umbratum and so on; A total of 115 bryophyte species (average coverage 79.29±1.64％)were found in shady-slope non-calcified habitat, and the dominate species was small bryophyte species such as Mnium spinosum, Thuidium cymbifolium, Bryhnia trichomitra and so on. A total of 91 bryophyte species (average coverage 60.64±1.93％) were found in semi-sunny-slope non-calcified habitat, and the dominate species was Mnium spinosum. (5) There were 234, 221 and 175 plant species in travertine bottomland, shady-slope non-calcified habitat and semi-sunny-slope non-calcified habitat, respectively. Shannon-Wiener index of the tree layer was 0.75 ±0.12, 1.87±0.12 and 1.78±0.07 (the shrub layer, 0.44±0.08, 1.71± 0.15 and 2.49±0.06; the herb layer, 0.33±0.13, 1.31±0.15 and 2.15±0.08; the bryophyte layer, 1.30±0.11, 2.08±0.04 and 1.73±0.11.) for the three habitats, respectively; Pielou index of the tree layer was 0.45±0.05, 0.29±0.06 and 0.28±0.08 (the shrub layer, 0.75±0.03, 0.68±0.05 and 0.52±0.06; the herb layer, 0.68±0.02, 0.77±0.02 and 0.74±0.02; the bryophyte layer, 0.40±0.03, 0.63±0.02 and 0.52±0.03.) for the three habitats, respectively. Simpson's index of the tree layer was 0.63±0.06, 0.78±0.04 and 0.83±0.07 (the shrub layer, 0.21±0.03、0.28±0.05、0.45±0.06; the herb layer, 0.25±0.02, 0.12±0.01 and 0.17±0.01; the bryophyte layer, 0.45±0.04, 0.18±0.01 and 0.31±0.04.) for the three habitats, respectively. There were low Sorenson index both in the tree layer and in the herb layer among the three habitats, whereas, high Sorenson index occurred both in the shrub layer and in the bryophyte layer. To sum up, there were differences both in community structure and plant diversity among the three different habitats, which means that we should pay more attention to habitats heterogeneities of the primitive Abies faxoniana forest when we take action to manage the forest in the Huanglong World Natural Heritage Site.

Simulation of Free-Surface Flow in a Tank Using the Navier-Stokes Model and Unstructured Finite Volume Method

Modelling free-surface flow has very important applications in many engineering areas such as oil transportation and offshore structures. Current research focuses on the modelling of free surface flow in a tank by solving the Navier-Stokes equation. An unstructured finite volume method is used to discretize the governing equations. The free surface is tracked by dynamically adapting the mesh and making it always surface conforming. A mesh-smoothing scheme based on the spring analogy is also implemented to ensure mesh quality throughout the computaiton. Studies are performed on the sloshing response of a liquid in an elastic container subjected to various excitation frequencies. Further investigations are also carried out on the critical frequency that leads to large deformation of the tank walls. Another numerical simulation involves the free-surface flow past as submerged obstacle placed in the tank to show the flow separation and vortices. All these cases demonstrate the capability of this numerical method in modelling complicated practical problems.

Preliminary Investigation of Fluid Flow in Meso-Scale Rectangular Tube

The fluid flow associated with micro and meso scale devices is currently of interest. Experiments were performed to study the fluid flow in meso-scale channels. A straight flow tube was fabricated with 1.0x4.0mm^2 in rectangular cross section and 200mm in length, which was made of quartz for flow visualization and PIV measurements. Reynolds numbers were ranged from 311 to over 3105. The corresponding pressure drop was from 0.65KPa to over 16.58KPa between the inlet and outlet of the tube. The micro PIV was developed to measure the velocity distribution in the tube. A set of microscope object lens was mounted ahead of CCD camera to obtain optimized optical magnification on the CCD chip. The velocity distributions near the outlet of the tube were measured to obtain full-developed flow. A CW laser beam was focused directly on the test section by a cylinder lens to form a small light sheet. Thus, high power density of light was formed on the view region. It is very important to the experiment while the velocity of the flow reaches to a few meters per second within millimeter scale. In this case, it is necessary to reduce exposure time to microseconds for PIV measurements. In the present paper, the experimental results are compared with the classical theories.

Equivalent Model Of Expansion Of Cement Mortar Under Sulphate Erosion

The expansion property of cement mortar under the attack of sulfate ions is studied by experimental and theoretical methods. First, cement mortars are fabricated with the ratio of water to cement of 0.4, 0.6, and 0.8. Secondly, the expansion of specimen immerged in sulphate solution is measured at different times. Thirdly, a theoretical model of expansion of cement mortar under sulphate erosion is suggested by virtue of represent volume element method. In this model, the damage evolution due to the interaction between delayed ettringite and cement mortar is taken into account. Finally, the numerical calculation is performed. The numerical and experimental results indicate that the model perfectly describes the expansion of the cement mortar.

Surface Stress Induced By Adatoms Adsorption On Solid Surfaces

Based on the statistical thermodynamics theory, a theoretical model of adsorbate induced surface stress of adatoms adsorption on solid surface is presented. For the low coverage, the interaction between the adsorbed molecules is entirely negligible and the adsorption induced surface stress is found to be the function of the coverage and the adsorption energy change with strain. For the high coverage, the adsorbate-adsorbate interaction contributes to the adsorption-induced surface stress effectively. In the case of carbon adsorption on the Ni(100) surface, the value of 0.5 is obtained as a characteristic coverage to decide whether to take the interaction between the adsorabtes into consideration and the results also show that the adsorption induces a compressive surface stress.

Measurement Of Fracture Toughness And Interfacial Shear Strength Of Hard And Brittle Cr Coating On Ductile Steel Substrate

The fracture toughness and interfacial adhesion properties of a coating on its substrate are considered to be crucial intrinsic parameters determining performance and reliability of coating-substrate system. In this work, the fracture toughness and interfacial shear strength of a hard and brittle Cr coating on a normal medium carbon steel substrate were investigated by means of a tensile test. The normal medium carbon steel substrate electroplated with a hard and brittle Cr coating was quasi-statically stretched to induce an array of parallel cracks in the coating. An optical microscope was used to observe the cracking of the coating and the interfacial decohesion between the coating and the substrate during the loading. It was found that the cracking of the coating initiated at critical strain, and then the number of the cracks of the coating per unit axial distance increased with the increase in the tensile strain. At another critical strain, the number of the cracks of the coating became saturated, i.e. the number of cracks per unit axial distance became a constant after this critical strain. Based on the experiment result, the fracture toughness of the brittle coating can be determined using a mechanical model. Interestingly, even when the whole specimen fractured completely under an extreme strain of the substrate, the interfacial decohesion or buckling of the coating on its substrate was completely absent. The test result is different from that appeared in the literature though the identical test method and the brittle coating/ductile metal substrate system are taken. It was found that this difference can be attributed to an important mechanism that the Cr coating on the steel substrate has a good adhesion, and the ultimate interfacial shear strength between the Cr coating and the steel substrate has exceeded the maximum shear flow strength level of the steel substrate. This result also indicates that the maximum shear flow strength level of the ductile steel substrate can be only taken as a lower bound estimate on the ultimate shear strength of the interface. This estimation of the ultimate interfacial shear strength is consistent with the theoretical analysis and prediction presented in the literature.

Recurrence plot analysis of DNA sequences

Recurrence plot technique of DNA sequences is established on metric representation and employed to analyze correlation structure of nucleotide strings. It is found that, in the transference of nucleotide strings, a human DNA fragment has a major correlation distance, but a yeast chromosome's correlation distance has a constant increasing. (C) 2004 Elsevier B.V All rights reserved.

爆炸法制备Sm_2Fe_(17)N_y永磁体

本文介绍了爆炸烧结Sm_2Fe_(17)N_7永磁体的试验及其结果.试验时,在外加磁场下把Sm_2Fe__(17)N_y磁粉取向压制成形后装人金属包套内并抽真空,炸药装在包套外的纸筒内,雷管引爆炸药后,在爆轰压力作用下,磁粉被压实而烧结成磁体。试验结束后,取出磁体测量密度及磁性参数。烧结磁体密度在理论密度6的85％～96％范围内,磁能积大于88 KJ?m~(-3)。它表明,爆炸烧结工艺是制备Sm_2Fe_(17)Ny永磁体的有效工艺。

地幔对流模拟实验

模拟实验是当前地幔对流研究中的一个重要手段,一个重要组成部分。本文着重介绍近年来关于地幔热对流模拟实验研究发展概况。从相似参数出发,讨论了实验装置,测试手段,并对实验结果和今后发展趋势作了评述。

等离子体反应器流场、温度场和浓度场的参数研究

文献[3,4]表述了描述等离子CVD化学反应器流场的数学物理模型,并利用Patankar方法对冷热流场作了求解。本文在此基础上就影响反应器流场、温度场和浓度场的有关参数作了理论研究。所研究的问题有:冷热流场的差别,喷射环缝密度和主流旋转速度对流动的影响。所得结果清楚地表明:这些参数的选择对反应器的性能有着不同程度的影响,而有些影响则是本质的。

烧蚀产物对空气辐射影响的实验研究

本文利用低密度激波管和辐射计,在不同的温度和密度状态下,就杂质辐射在分谱和累积辐射条件下对高温空气平衡辐射的影响进行的实验研究;给出了在不同条件下的实验结果,并做了简单分析。实验结果表明:少量杂质对高温空气平衡辐射的影响较大,这为计算尾流辐射场时,考虑杂质辐射的影响提供了实验依据。

有序熔楔和转捩

本文研究烧蚀表面上的一种尖楔状沟槽,简称熔楔。实验表明,熔楔是边界层转捩区的一种烧蚀现象;在蜂蜡和一些高温材料的球头上,熔楔排列有序,形成规则图象。在所实验的参数范围内,熔楔的条数保持在20条左右,不随来流马赫数、球头半径和烧蚀材料类型不同而改变。在分析研究熔楔内部结构和外流条件的基础上,本文提出熔楔形成机理和内外流动模型的设想,并对熔楔的形态、分布以及由它引导出菱形花纹等现象作了解释。

湍流自由剪流的自模性理论

本文讨论了自由湍流剪流的速度脉动与温度脉动特性.用与各向同性湍流对比确定经验常数的方法,使所论半经验理论与实验数据的比较中,只有湍流尺度扩散律中的比例系数以及动量扩散与热量扩散问题的各自一个经验常数由实验决定.

Free surface vibration in oscillatory convection of half floating zone

Projecting an orthographical grating mask (20pl/mm) on the surface of a small liquid bridge and receiving the reflected distortion image, one can calculate out reversely the shape of free surface of a liquid bridge. In this way we measured the surface shape of a small floating zone and the two-dimensional deformation of its vibration. The mechanism of thermocapillary oscillatory convection and the three-dimensional variation of the free surface are revealed experimentally. The principle for space experiment has been studied in our laboratory.