Preliminary Investigation of Fluid Flow in Meso-Scale Rectangular Tube


Autoria(s): Hu L(胡良); Kang Q(康琦); Zhang JF(张嘉峰)
Data(s)

2003

Resumo

The fluid flow associated with micro and meso scale devices is currently of interest. Experiments were performed to study the fluid flow in meso-scale channels. A straight flow tube was fabricated with 1.0x4.0mm^2 in rectangular cross section and 200mm in length, which was made of quartz for flow visualization and PIV measurements. Reynolds numbers were ranged from 311 to over 3105. The corresponding pressure drop was from 0.65KPa to over 16.58KPa between the inlet and outlet of the tube. The micro PIV was developed to measure the velocity distribution in the tube. A set of microscope object lens was mounted ahead of CCD camera to obtain optimized optical magnification on the CCD chip. The velocity distributions near the outlet of the tube were measured to obtain full-developed flow. A CW laser beam was focused directly on the test section by a cylinder lens to form a small light sheet. Thus, high power density of light was formed on the view region. It is very important to the experiment while the velocity of the flow reaches to a few meters per second within millimeter scale. In this case, it is necessary to reduce exposure time to microseconds for PIV measurements. In the present paper, the experimental results are compared with the classical theories.

Identificador

http://dspace.imech.ac.cn/handle/311007/17690

http://www.irgrid.ac.cn/handle/1471x/2302

Idioma(s)

英语

Fonte

Proc. SPIE,2003,5058:251-256

Palavras-Chave #力学
Tipo

期刊论文