1.5μm Self-Aligned Spotsize Converter Integrated DFB Fabricated by Selective Area Grown MOVPE

High performance 1.57μm spotsize converter monolithically integrated DFB is fabricated by the technique of self-aligned selective area growth. The upper optical confinement layer and the butt-coupled tapered thickness waveguide are regrown simultaneously, which not only offeres the separated optimization of the active region and the integrated spotsize converter, but also reduces the difficulty of the butt-joint selective regrowth. The threshold current is as low as 4.4mA. The output power at 49mA is 10.1mW. The side mode suppression ratio (SMSR) is 33.2dB. The vertical and horizontal far field divergence angles are as small as 9° and 15° respectively, the 1dB misalignment tolerance are 3.6μm and 3.4μm.

Spotsize Converter Integrated DFB Laser Diode Using Selective Area Growth of MOCVD

The characteristics of thickness enhancement factor and bandgap wavelength of selectively grown In-GaAsP are investigated. A high thickness enhancement factor of 2.9 is obtained. Spotsize converter integrated DFB lasers are fabricated by using the technique of SAG. The threshold current is as low as 10.8mA. The output power is 10m W at 60mA without coating and the SMSR is 35.8dB. The vertical far field angle (FWHM) is decreased from 34 °to 9 °. The tolerance of 1dBm misalignment is 3.4μm vertically.

Monolithic Integration of DFB Laser Diode and Electroabsorption Modulator by Selective Area Growth Technology

国家863计划

Multi-Wavelength InGaAsP Lasers Grown by LP-MOCVD Selective Area Growth

国家863计划

Microorganisms linked to Neoproterozoic microspar carbonate sedimentation in the Jilin-Liaoning area

Molar-tooth carbonate refers to a sort of rock that has ptygmatical folded structure comparable to the ivory. This kind of carbonate exists in a special time range (from Middle to Neoproterozoic). Its origin and the possibility to use it in stratigraphic correlation of the paleocontinent is the key task of the IGCP447, a project on Proterozoic molar tooth carbonates and the evolution of the earth (2001-2005). The importance lies in that the molar-tooth structure is the key to solving problems related to Precambrian biological and global geochemical events. The molar-tooth structure is associated with microorganisms. Development and recession of such carbonates have relations with the evolution process of early lives and abrupt changes in sea carbonate geochemistry. In recent years, based on researches on petrology, geochemistry and Sr isotope of molar-tooth carbonate in the Jilin-Liaoning and Xuzhou-Huaiyang area, the authors hold that it can be used as a marker for stratigraphic sequence and sedimentary facies analyses.

Tunable MQW-DBR lasers using selective area growth

The tunable ridge waveguide distributed Bragg reflector (DBR) lasers designed for wavelength-division-multiplex (WDM) communication systems at 1.55 um by using selective area growth (SAG) is reported. The threshold current of the DBR laser is 62mA and the output power is more than 8mW. The isolation resistance between the active region and the Bragg region is 30K Ohm. The total tuning range is 6.5nm and this DBR laser can provide 6 continuous standard WDM channels with 100GHz channel spacing; in the tuning range, the single mode suppression ratio (SMSR) is maintained more than 32dB and the maximum output power variation is less than 3dB.

Design, simulation and testing of large area silicon drift detectors and detector array for X-ray spectroscopy

Large area (25 mm(2)) silicon drift detectors and detector arrays (5x5) have been designed, simulated, and fabricated for X-ray spectroscopy. On the anode side, the hexagonal drift detector was designed with self-biasing spiral cathode rings (p(+)) of fixed resistance between rings and with a grounded guard anode to separate surface current from the anode current. Two designs have been used for the P-side: symmetric self-biasing spiral cathode rings (p(+)) and a uniform backside p(+) implant. Only 3 to 5 electrodes are needed to bias the detector plus an anode for signal collection. With graded electrical potential, a sub-nanoamper anode current, and a very small anode capacitance, an initial FWHM of 1.3 keV, without optimization of all parameters, has been obtained for 5.9 keV Fe-55 X-ray at RT using a uniform backside detector.

沈阳城市森林生态系统健康与管理研究

本文系统研究了沈阳城市森林的布局与结构、城市森林功能、城市森林病虫害发生与树木健康状况和城市自然资源与社会经济状况等指标对沈阳城市森林生态系统健康与管理的影响。同时一，采用2种生态系统健康评价方法对沈阳城市森林生态系统健康状况进行了评价，并提出了沈阳城市森林生态系统健康管理的对策。研究结果如下：1、截至2004年末，沈阳城市森林植被覆盖率已经达到35％，城市森林林地分布基本合理，但需要进一步加强道路林地、居住区林地和城郊大面积生态林建设。2、沈阳城市森林以乔木为主，乔灌株数比为1.7：1，乔灌的覆盖度比约为7:1。3、沈阳城市森林不同类型林地中植物组成不同。公园林地中有74个属，137个种（变种）；庭院林地中有53个属，104个种（变种）；居住区林地中有45个属，81个种（变种）；道路林地中有43个属，94个种（变种）；运河风景林地中有75个属，142个种（变种）；棋盘山风景林地中有48个属，118个种（变种）。4、公园林地、庭院林地、居住区林地、道路林地和运河风景林地的Shannon一Wiener多样性指数分别为2.78、3.05、3.15、3.18和3.18，均匀度指数分别为0.56、0.66、0.72、0.70和0.64。除了棋盘山风景林地外，沈阳城市森林中栽植总量超过乔木总量5％的乔木树种有7个属，分别为李、柳树、杨树、桧柏、榆树、槐树和银杏，7种树木总量达到了全部乔木总量的82.09％；栽植总量超过灌木总量5％的灌木树种也有7个属，分别为水腊、丁香、李属，小聚、玫瑰、忍冬和连翘，7个属灌木总量达到了全部灌木总量的87.92％。5、公园林地、庭院林地、道路林地和防护林地中OBH＜20cm、20cm＜DBH＜60cm和DBH＞60cm树木的比例分别为：57.9％、40.0％、2.1％，49.2％、47.8％、3.0％，65.3％、33.1％、1.6％和64.6％、34.9％、0.5％，表明沈阳城市森林树木的规格总体上偏小。6、经样方调查和CITYgreen模型计算，沈阳城市森林的生态效益约2.0亿USD／yr.。公园林地、庭院林地和风景林地的景观指标相对较高；道路林地和居住区林地的景观效果一般；防护林地的景观效果较差。7、目前已经发现的沈阳城市森林病害约600余种，虫害约700余种，其中杨树主要病虫害39种，柳树的主要病虫害有33种，榆树和槐树的主要病虫害均为，1种。杨柳树腐烂病、光肩星天牛、天幕毛虫、桃红颈天牛和美国白蛾等是近10年来沈阳城市森林中普遍发生和造成严重危害的主要病虫害。沈阳城市森林主要树木的平均健康指数为2.68，处于一般健康状态。8、沈阳城市森林的土壤和水资源状况均不利于树木的健康生长，沈阳的社会经济发展也有待于进一步提高。9、经过生物指示物法（光肩星天牛为生物指示物）、专家权重法、公众问卷调查和对比研究，沈阳城市森林生态系统总体上处于亚健康状态。10、通过对沈阳城市森林资源、管理状况的调查研究和健康状况的评价，本文提出了沈阳城市森林生态系统健康管理的对策，包括合理规划沈阳城市森林林地布局，增加道路林地、居住区林地和城郊林地的面积和植被覆盖率；调整树木种类组成，避免单一或少数树种的大量栽植，提高生物多样性水平；保护大树和古树；增加城市森林管理资金的投入；应用先进技术，采取科学的病虫害防治和植物养护方法，促进树木的健康生长等。This project systematically studied the urban forest ecosystem health and management in Shenyang. The study explored factors, such as urban forest structure, distribution, pests, aesthetic value, ecological benefit, natural resources and socieo-economic status, that affecting the urban forest ecosystem health and management. Two methods were used to evaluate the ecosystem health. This project also proposed Shenyang's urban forest ecosystem health management strategies. The research results can be summarized as follows: 1. As of the end of 2004, urban forest coverage in Shenyang is about 35%, and is in relatively even patch distribution pattern. However, the street trees and roadside forest patches, residential block forest patches should be enhanced. 2. Trees are the major component of the Shenyang s urban forest, followed by shrubs. The quantity ratio of tree to shrub is about 1.7:1, and the coverage ratio of trees to shrub is about 7:1. 3. Species composition varies by location. There are 74 genera, 137 species (including varieties) in the public parks; 53 genera, 104 species (and var.) in the green spaces of the institution (including school), factory, and company; 45 genera, 81 species (var.) in residential blocks; 43 genera, 94 species (var.) in streets and roadside forest patches; 75 genera, 142 species (var.) in the Canal landscape forest patches; 48 genera, 118 species (var.) in the Qipan Mountain recreation forest. 4. The Shannon-Woener indices varies in parks, in institution, factory, and company yards, in streets and roadside forest patches, in residential blocks.there are 2.78, 3.05, 3.18, 3.15, 3.18, respectively; and the evenness indices are 0.56, 0.66, 0.70, 0.72, 0.64, respectively. Besides the Qipan Mountain forest patches, trees of 7 genera, Prunus spp., Salix spp., Populus spp., Sabina spp., Ulmus spp., Robinia spp. and Ginkgo biloba are of more than 5% the total urban trees, respectively. In fact, trees from these 7 genera are about 82% of all trees in Shenyang's urban forests. In terms of shrubs, species of 7 genera, Ligustrum spp., Syringa spp., Prunus spp., Berberis spp., Rosa spp., Lonicera spp., and Forsythia spp. are more than 5% the total urban shrubs, respectively. 88% of all the shrubs in Shenyang s urban forest are from these 7 genera. 5. The diameter class of DBH<20cm, 20cm60cm of trees in parks, in institution, factory, and company yards, in in streets and roadside forests, and in protective forests are 57.9%, 40.0%, 2.1%; 49.2%, 47.8%, 3.0%; 65.3%, 33.1%, 1.6%; and 64.6%, 34.9%, 0.5%, respectively. The result indicated that the DBH is relatively small in Shenyang s urban forests. 6. Using random plots sampling and CITYgreen model calculation, the ecological benefit of Shenyang's urban is about 0.2 billion US dollars per year. The aesthetic value of parks, institution and company yards, and scenary forest patches is relative high; however, the aesthetic value of protective forest patches is low. 7. There are more than 600 types of diseases and more than 700 kinds of insects in Shenyang's urban forest. Among them, Populus spp., Salix spp., Ulmus spp. and Robinia spp., are attached mainly by 39, 33, 11, and 11, difference types of pests respectively. The rot disease of the Populus spp. and Salix spp., and the insects such as, Anoplophora glabripennis, Malacosoma neustria, Aromia bungii, and Hyphantria cunea are major pests in Shenyang s urban forest for the past 10 years. The trees health condition is relatively poor by having the average health index of 2.68 for major species. 8. The urban soil and water resource are not favorable to tree's growth in Shenyang, and so is the socieo-economic status. 9. Through using bio-indicator, professional and public evaluation, and comparision with other urban forests, it can be concluded that the status of Shenyang s urban forest is not very healthy in general. 10. To improve the urban forest ecosystem health in Shenyang, a better urban forest design need to be implemented to enhance the area and vegetation coverage of the street and roadside forests, the residential block forests, and the surburb forest Species biodiversity need to be enhanced by adjust the species composition of urban forest trees to reduce the single or several tree species populations and to plant more varieties. A better fundings for urban forest health management need to be budgeted. Advanced technologies in tree care and scientific measures to control pests need to be adopted to prove better care for plants and to keep trees grow healthfully.