225 resultados para POTENTIOMETRIC BIOSENSOR
Resumo:
Monensin was incorporated into phospholipid/alkanethiol bilayers on the gold electrode surface by a new, paint-freeze method to deposit a lipid monolayer on the self-assembled monolayers (SAMs) of alkanethiol. The advantages of this assembly system with a suitable function for investigating the ion selective transfer across the mimetic biomembrane are based on the characteristics of SAMs of alkanethiols and monensin. On the one hand, the SAMs of alkanethiols bring out their efficiency of packing and coverage of the metal substrate and relatively long-term stability; on the other hand, monensin improves the ion selectivity noticeably. The selectivity coefficients K-Na+,K-K+, K-Na+,K-Rb+ and K-Na+,K-Ag+ are 6 x 10(-2), 7.2 x 10(-3) and 30 respectively. However, the selectivity coefficient K-Na+,K-Li+ could not be obtained by a potentiometric method due to the specific interaction between Li+ and phospholipid and the lower degree of complexion between Li+ and monensin. The potential response of this bilayer system to monovalent ions is fairly good. For example, the slope of the response to Na+ is close to 60 mV per decade and its linearity range is from 10(-1) to 10(-5) M with a detection limit of 2 x 10(-6) M, The bilayer is stable for at least two months without changing its properties. This monensin incorporated lipid/alkanethiol bilayer is a good mimetic biomembrane system, which provides great promise for investigating the ion transfer mechanism across the biomembrane and developing a practical biosensor.
Resumo:
A new immobilization material and an immobilization method for a glucose sensor with HEFc (hydroxyethylferrocene) as mediator is described. In the course of three months, the enzyme electrode shows almost no deterioration in its response characteristics. The response time is less than 30 s. The electrode has a wide linear range up to 10 mmol l(-1) with good repeatability. The kinetic parameters have also been calculated.
Resumo:
A new immobilization method for construction of a tyrosinase based biosensor is described. A simple physical freezing technique was adopted for preparation. The immobilized enzyme yields specific activities that are more than 22% of the soluble enzyme. The enzyme electrode can be stored in dry state for more than three months without any loss of activity. The biosensor was applied to the determination of several phenols and o-diphenols. The lowest detect limit is 0.02 mu mol/1 and the linear range was 1.0 X 10(-7)-1.0 X 10(-4) mol/1 for catechol. The kinetic parameters have also been calculated.
Resumo:
A novel immobilization method for construction of a tyrosinase-based biosensor applied in pure organic phase is described. This method gives the enzyme a hydrated shell which allows the enzyme to maintain its biocatalytic activity in a pure organic solvent The enzyme electrode was used to determine several phenols and o-diphenols in pure chloroform and chlorobenzene. The biosensor can be stored in dry state for more than 3 months without any loss of the activity. The kinetic parameters have also been calculated and are presented herein.
Resumo:
A fast, sensitive and reliable potentiometric stripping analysis (PSA) is described for the selective detection of the marine pathogenic sulfate-reducing bacterium (SRB). Desulforibrio caledoiensis. The chemical and electrochemical parameters that exert influence on the deposition and stripping of lead ion, such as deposition potential, deposition time and pH value were carefully studied. The concentration of SRB was determined in acetate buffer solution (pH 5.2) under the optimized condition (deposition potential of -1.3 V. deposition time of 250 s, ionic strength of 0.2 mol L-1 and oxidant mercury (II) concentration of 40 mg L-1). A linear relationship between the stripping response and the logarithm of the bacterial concentration was observed in the range of 2.3 x 10 to 2.3 x 10(7) cfu mL(-1). In addition, the potentiometric stripping technique gave a distinct response to the SRB, but had no obvious response to Escherichia coli. The measurement system has a potential for further applications and provides a facile and sample method for detection of pathogenic bacteria. (C) 2010 Elsevier B.V. All rights reserved.
Resumo:
椭偏光学生物传感器是在椭偏光学显微成像技术的基础上发展的一项生物传感技术.它能够直接观测固体表面上的生物分子面密度,毋需任何标记辅助,适合发展成为一种无标记免疫检测技术.研究了在硅片表面上通过A蛋白定向固定抗体分子用于椭偏光学生物传感器免疫检测的可能性.实验结果表明,通过A蛋白固定抗体得到的抗体膜层的均一性和固定量的重复性能够保证椭偏光学生物传感器免疫检测结果的质量.通过A蛋白定向固定的抗体的抗原结合位点趋向一致,显著提高了抗体与抗原结合的能力.此外,通过蛋白A固定的免疫球蛋白G分子能够结合更多的多克隆抗体分子说明通过A蛋白固定的蛋白质分子能够较好地保持其空间构象.
Resumo:
椭偏光学生物传感器是识别和检测蛋白质的一种新型的高通量、快速生物分子分析技术.它可以实现无标记多元生物分子自动化检测、静态或动态测量及定性和定量测量等,已应用于生物医学与临床检测等方面,如肿瘤标志蛋白检测、乙肝五项同时检测、蛋白质竞争吸附以及多元蛋白质相互作用动态测量等,显示出了广阔的应用前景.
Resumo:
Cell adhesion is crucial to many biological processes, such as inflammatory responses, tumor metastasis and thrombosis formation. Recently a commercial surface plasmon resonance (SPR)-based BIAcore biosensor has been extended to determine cell binding mediated by surface-bound biomolecular interactions. How such cell binding is quantitatively governed by kinetic rates and regulating factors, however, has been poorly understood. Here we developed a novel assay to determine the binding kinetics of surface-bound biomolecular interactions using a commercial BIAcore 3000 biosensor. Human red blood cells (RBCs) presenting blood group B antigen and CM5 chip bearing immobilized anti-B monoclonal antibody (mAb) were used to obtain the time courses of response unit, or sensorgrams, when flowing RBCs over the chip surface. A cellular kinetic model was proposed to correlate the sensorgrams with kinetic rates. Impacts of regulating factors, such as cell concentration, flow duration and rate, antibody-presenting level, as well as pH value and osmotic pressure of suspending medium were tested systematically, which imparted the confidence that the approach can be applied to kinetic measurements of cell adhesion mediated by surface-bound biomolecular interactions. These results provided a new insight into quantifying cell binding using a commercial SPR-based BIAcore biosensor.
Resumo:
Surface plasmon resonance (SPR) technology and the Biacore biosensor have been widely used to measure the kinetics of biomolecular interactions in the fluid phase. In the past decade, the assay was further extended to measure reaction kinetics when two counterpart molecules are anchored on apposed surfaces. However, the cell binding kinetics has not been well quantified. Here we report development of a cellular kinetic model, combined with experimental procedures for cell binding kinetic measurements, to predict kinetic rates per cell. Human red blood cells coated with bovine serum albumin and anti-BSA monoclonal antibodies (mAbs) immobilized on the chip were used to conduct the measurements. Sensor-grams for BSA-coated RBC binding onto and debinding from the anti-BSA mAb-immobilized chip were obtained using a commercial Biacore 3000 biosensor, and analyzed with the cellular kinetic model developed. Not only did the model fit the data well, but it also predicted cellular on and off-rates as well as binding affinities from curve fitting. The dependence of flow duration, flow rate, and site density of BSA on binding kinetics was tested systematically, which further validated the feasibility and reliability of the new approach. Crown copyright (c) 2008 Published by Elsevier Inc. All rights reserved.
Resumo:
The Tie-2 receptor has been shown to play a role in angiogenesis in atherosclerosis. The conventional method assaying the level of soluble Tie-2 (sTie-2) was ELISA. However, this method has some disadvantages. The aims of this research are to establish a more simple detection method, the optical protein-chip based on imaging ellipsomtry (OPC-IE) applying to Tie-2 assay. The sTie-2 biosensor surface on silicon wafer was prepared first, and then serum levels of sTie-2 in 38 patients with AMI were measured on admission (day 1), day 2, day 3 and day 7 after onset of chest pain and 41 healthy controls by ELISA and OPC-IE in parallel. Median level of sTie-2 increased significantly in the AMI patients when compared with the controls. Statistics showed there was a significant correlation in sTie-2 results between the two methods (r=0.923, P0.01). The result of this study showed that the level of sTie-2 increased in AMI, and OPC-IE assay was a fast, reliable, and convenient technique to measure sTie-2 in serum.
Resumo:
为实现对特定生物分子的高灵敏度快速检测与分析。采用上转换发光材料作为标记物,研制成功一台基于上转换发光技术的新型光学免疫生物传感器。该传感器利用上转换发光材料在红外光激发下发射可见磷光的特性,通过对免疫层析试纸条上经生物反应而结合上去的上转换发光材料颗粒的含量进行检测,计算出被测样品中特定生物分子的浓度。实验结果表明,该传感器具有较好的生物特异性,对兔抗鼠疫免疫球蛋白(IgG)标准样品的检测灵敏度达到ng/ml量级,并在200~6000ng/ml浓度范围内具有良好的线性响应特性,相关系数R^2≥0.95;
Resumo:
本文报道的基于一维CCD的免疫层析试纸条检测系统是一种以上转换磷光材料(UCP)作为标记物的生物传感器。该系统通过检测生物反应后试纸条上UCP颗粒的含量,计算出被测样品中特定生物分子的浓度,可以实现对多种病原体的快速定性与定量检测。本检测系统对0—60ns/ml系列标准样品的检测结果具有很好的线性响应特性,且与扫描型检测系统的检测结果十分接近。
Resumo:
A glutamate biosensor based on the electrocatalytic oxidation of reduced nicotinamide adenine dinucleotide (NADH), which was generated by the enzymatic reaction, was developed via employing a single-walled carbon nanotubes/thionine (Th-SWNTs) nanocomposite as a mediator and an enzyme immobilization matrix. The biosensor, which was fabricated by immobilizing glutamate dehydrogenase (GIDH) on the surface of Th-SWNTs, exhibited a rapid response (ca. 5 s), a low detection limit (0.1 mu M), a wide and useful linear range (0.5-400 mu M), high sensitivity (137.3 +/- 15.7) mu A mM(-1) cm(-2), higher biological affinity, as well as good stability and repeatability. In addition, the common interfering species, such as ascorbic acid, uric acid, and 4-acetamidophenol, did not cause any interference due to the use of a low operating potential (190 mV vs. NHE). The biosensor can be used to quantify the concentration of glutamate in the physiological level. The Th-SWNTs system represents a simple and effective approach to the integration of dehydrogenase and electrodes, which can provide analytical access to a large group of enzymes for wide range of bioelectrochemical applications including biosensors and biofuel cells.
Resumo:
围绕论文题目“电化学SPR生物传感器的研究及应用”,我们将SPR传感金膜同时用作电化学研究的界面,在自行组建的电化学SPR (EC-SPR)池中进行了相关的EC-SPR研究。 本论文研究工作的主要内容包括以下几个方面: 1. 发展了一种电化学薄化控制SPR金膜厚度,优化SPR信号的方法。这种方法主要是利用在较高电位下金与氯离子发生络合反应使SPR金膜表面的金部分溶解进入溶液从而达到薄化金基底的目的。通过调节溶液中氯离子的浓度和电化学扫描的次数,可以现场调控SPR基底的金膜厚度。我们用这种处理过的金膜进行了生物分子的吸附试验,结果证明了这种处理过的金膜适用于一般的SPR分析。 2. 采用湿化学镀膜法结合光刻法制备SPR金膜微阵列,拟将用于SPR成像分析。这种方法属于湿化学法制备SPR金膜微阵列,主要是在胶体金纳米粒子的自组装膜上刻蚀出金纳米粒子的微阵列,然后用湿化学法生长出合适的金微阵列。这种方法对制备条件要求比较简单,在制备纳米金微阵列的过程中腐蚀时间比较好控制,同时催化生长出新的金面。重复试验证实了这种方法能够制备出稳定的,尺寸可控的金微阵列,有望用于SPR成像系统研究生物分子相互作用。 3. 在SPR金膜表面利用电沉积法制备了超薄的壳聚糖薄膜,并将之应用于生物分子相互作用的研究。通过一步电沉积的方法制备了超薄的壳聚糖修饰的SPR金基片,并研究了几种常见蛋白与壳聚糖薄膜的非特异性作用,进一步用鼠IgG和抗鼠IgG作为一个典型的例子研究了壳聚糖修饰膜的生物相容性。试验表明壳聚糖修饰膜有好的生物相容性。 4. 首次提出利用生物催化沉积金属纳米粒子放大SPR信号测定小分子的方法。生物小分子抗坏血酸能够还原银离子,使其在金纳米表面沉积形成金属银原子。银原子的沉积将会极大地增强SPR信号,从而实现SPR光谱对小分子抗坏血酸浓度的放大测定。每次测定后,通过电化学剥脱Ag原子,SPR芯片的表面能够完全再生。同时,剥脱的银原子的量也能够被电化学测定,这也实现了抗坏血酸的间接电化学测定。 5. 结合电化学和SPR技术表征了DNA/Zr4+多层膜在金膜表面的生长过程,并研究了这种多层膜与细胞色素c的相互作用。SPR技术被用于测定 (DNA/ Zr4+)1双层中DNA单层的有效膜厚,及其表面覆盖率。利用红外反射光谱和X-射线光电子能谱表征这种多层膜的组成。通过EC-SPR方法,这种多层膜和细胞色素c的相互作用被进一步分析。结果表明这种多层膜不仅增强了细胞色素c的固定量,而且保持了细胞色素c的生物活性。 6. 利用EC-SPR技术测定了聚苯胺支撑的双层磷脂膜中的酶促反应。通过泡囊融合法在聚苯胺表面形成HRP掺杂的磷脂双层膜。这种磷脂双层膜能够很好的保存膜内的辣根过氧化酶(HRP)的活性,同时,这种膜允许质子的跨膜传输,能够提供聚苯胺和HRP在双氧水存在下反应所需的质子,实现酶促开关控制聚苯胺氧化还原态的变化,通过SPR检测这种聚苯胺膜的氧化还原态的变化,从而达到利用SPR测定酶底物小分子的目的。 7. 开展了适配子(aptamer)的EC-SPR研究。利用亚甲基兰为外在电化学探针分子,我们设计了一种简单的、可再生的电化学方法测定小分子腺苷。结果表明这种方法对腺苷的检测具有较高的灵敏性和选择性。这种设计思路有望进一步用于构建一个可再生的SPR传感器平台,用于研究适配子与蛋白质相互作用。