Fracture properties of PECVD silicon nitride thin films by long rectangular memrane bulge test

Bulge test combined with a refined load-deflection model for long rectangular membrane was applied to determine the mechanical and fracture properties of PECVD silicon nitride (SiNx) thin films. Plane-strain modulus E-ps prestress s(0), and fracture strength s(max) of SiNx thin films deposited both on bare Si substrate and on SiO2-topped Si substrate were extracted. The SiNx thin films on different substrates possess similar values of E-ps and s(0) but quite different values of s(max). The statistical analysis of fracture strengths were performed by Weibull distribution function and the fracture origins were further predicted.

Comparative study of the surface passivation on crystalline silicon by silicon thin films with different structures

Si thin films with different structures were deposited by plasma enhanced chemical vapor deposition (PECVD), and characterized via Raman spectroscopy and Fourier transform infrared (FTIR) spectroscopy. The passivation effect of such different Si thin films on crystalline Si surface was investigated by minority carrier lifetime measurement via a method, called microwave photoconductive decay (mu PCD), for the application in HIT (heterojunction with intrinsic thin-layer) solar cells. The results show that amorphous silicon (a-Si:H) has a better passivation effect due to its relative higher H content, compared with microcrystalline (mu c-Si) silicon and nanocrystalline silicon (nc-Si). Further, it was found that H atoms in the form of Si-H bonds are more preferred than those in the form of Si-H-2 bonds to passivate the crystalline Si surface. (C) 2009 Elsevier B.V. All rights reserved.

EFFECT OF TOTAL HYDROGEN CONTENT IN SILICON-NITRIDE SENSITIVE FILM ON PERFORMANCE OF ISFET

Quantitative determinations of the hydrogen content and its profile in silicon nitride sensitive films by the method of resonant nuclear reaction have been carried out. At a deposition temperature of 825-degrees-C, hydrogen exists in an LPCVD silicon nitride sensitive film and the hydrogen content on its surface is in the range (8-16) x 10(21) cm-3, depending on the different deposition processes used. This hydrogen content is larger than the (2-3) x 10(21) cm-3 in its interior part, which is homogeneous. Meanwhile, we observe separate peaks for the chemical bonding configurations of Si-H and N-H bonds, indicated by the infrared absorption bands Si-O (1106 cm-1), N-H (1200 cm-1), Si-H-3 (2258 cm-1) and N-H-2 (3349 cm-1), respectively. The worse linear range of the ISFET is caused by the presence of oxygen on the surface of the silicon nitride sensitive film. The existence of chemical bonding configurations of Si-H, N-H and N-Si on its surfaces is favourable for its pH response.

Quantum confinement effect in thin quantum wires

The electronic states and optical transition properties of three semiconductor wires Si? GaAs, and ZnSe are studied by the empirical pseudopotential homojunction model. The energy levels, wave functions, optical transition matrix elements, and lifetimes are obtained for wires of square cross section with width from 2 to 5 (root 2a/2), where a is the lattice constant. It is found that these three kinds of wires have different quantum confinement properties. For Si wires, the energy gap is pseudodirect, and the wave function of the electronic ground state consists mainly of four bulk Delta states. The optical transition matrix elements are much smaller than that of a direct transition, and increase with decreasing wire width. Where the width of wire is 7.7 Angstrom, the Si wire changes from an indirect energy gap to a direct energy gap due to mixing of the bulk Gamma(15) state. For GaAs wires. the energy gap is also pseudodirect in the width range considered, but the optical transition matrix elements are larger than those of Si wires by two orders of magnitude for the same width. However, there is no transfer to a direct energy gap as the wire width decreases. For ZnSe wires, the energy gap is always direct, and the optical transition matrix elements are comparable to those of the direct energy gap bulk semiconductors. They decrease with decreasing wire width due to mixing of the bulk Gamma(1) state with other states. All quantum confinement properties are discussed and explained by our theoretical model and the semiconductor energy band structures derived. The calculated lifetimes of the Si wire, and the positions of photoluminescence peaks, are in good agreement with experimental results.

Formation of Fe-N films containing Fe6N2 phase by ion beam assisted deposition

Fe-N films were deposited on Si(100) and GaAs(100) substrates at room temperature by ion beam assisted deposition under various N/ Fe atomic arrival ratio, 0.09, 0.12, 0.15. The results of X-ray diffraction indicated that the film deposited at 0.12 of N/Fe arrival ratio contained a considerable fraction of the Fe16N2 phase which had grown predominantly in the [001] orientation. For the larger N/Fe arrival ratio, a martensite phase with 15 at.% nitrogen was obtained. It was found that a lower deposition temperature (<200 degrees C) was necessary for the formation of the Fe16N2 phase.

CHARACTERISTICS OF OXIDES FORMED FROM A SI0.5GE0.5

X-ray photoelectron spectroscopy (XPS) combined with Auger electron spectroscopy (AES) have been used to study the oxides from a Si0.5Ge0.5 alloy grown by molecular beam epitaxy (MBE). The oxidation was performed at 1000 degrees C wet atmosphere. The oxide consists of two layers: a mixed (Si,Ge)O-x layer near the surface and a pure SiOx layer underneath. Ge is rejected from the pure SiOx and piles up at the SiOx/SiGe interface. XPS analysis demonstrates that the chemical shifts of Si 2p and Ge 3d in the oxidized Si0.5Ge0.5 are significantly larger than those in SiO2 and GeO2 formed from pure Si and Ge crystals.

Polymorphous silicon nanowires synthesized by plasma-enhanced chemical vapor deposition

Polymorphous Si nanowires (SiNWS) have been successfully synthesized on Si wafer by plasma enhanced chemical vapor deposition (PECVD) at 440degreesC,using silane as the Si source and Au as the catalyst. To grow the polymorphous SiNWS preannealing the Si substrate with Au film at 1100 degreesC is needed. The diameters of Si nanowires range from 15 to 100 urn. The structure morphology and chemical composition of the SiNWS have been characterized by high resolution x-ray diffraction, scanning electron microscopy, transmission electron microscopy, as well as energy dispersive x-ray spectroscopy. A few interesting nanowires with Au nanoclusters uniformly distributed in the body of the wire were also produced by this technique.

Applications of dielectric thin film by electron cyclotron resonance plasma chemical vapor deposition for semiconductor photoelectronic devices

The paper reports a method of depositing SiO2, SiNx, a:Si, Si3N4 and SiOxNy dielectric thin films by electron cyclotron resonance plasma chemical vapor deposition (ECR CVD) on InP, InGaAs and other compound semiconductor optoelectronic devices,and give a technology of depositing dielectric thin films and optical coatings by ECR CVD on Laser's Bars. The experiment results show the dielectric thin films and optical coatings are stable at thermomechanical property,optical properties and the other properties. In addition, the dielectric thin film deposition that there is low leakage current is reported for using as diffusion and ion implatation masks in the paper. In the finally, the dielectric film refractive index can be accurately controlled by the N-2/O-2/Ar gas flow rate.

中国青藏高原青稞抗穗发芽资源评价与α-淀粉酶基因的克隆及表达

穗发芽（PHS，preharvest sprouting）是影响禾本科作物生产的重要的灾害之一。收获时期如遇潮湿天气容易导致穗发芽发生。发生穗发芽的种子内部水解酶（主要是α-淀粉酶）活性急剧升高，胚乳贮藏物质开始降解，造成作物产量和品质严重降低。因此，选育低穗发芽风险的品种是当前作物育种工作中面临的重要任务。 青稞(Hordeum vulgare ssp. vulgare)主要分布于青藏高原，自古以来就是青藏高原人民的主要粮食。近年来，由于青稞丰富的营养成分和特有的保健品质、在燃料工业中的潜力以及在啤酒酿造工业中的利用前景，在发达国家日趋受到重视，掀起综合研究利用的热潮。我国拥有占全世界2/3 以上的青稞资源，具有发展青稞产业的得天独厚的条件。然而，由于青稞收获期间恰逢青藏高原雨季来临，常有穗发芽灾害发生，使青稞生产损失巨大。目前对青稞穗发芽研究很少，适用于育种的穗发芽抗性材料相对缺乏，不能很好的满足青稞穗发芽抗性育种的需要。本研究以青藏高原青稞为材料，对其穗发芽抗性的评价指标和体系进行构建，同时筛选青稞抗穗发芽品种并对其抗性进行评价，还利用分子生物学手段对青稞穗发芽抗性的分子机理进行了初步探讨。主要研究结果如下： 1. 本试验以来自于我国青藏高原地区的青稞为材料，对休眠性测定的温度范围进行探讨，并对各种穗发芽抗性测定方法的对青稞的适用性进行评测。通过探讨温度对13 个不同基因型的青稞籽粒发芽和休眠性表达的影响，对筛选青稞抗穗发芽资源的温度条件进行探索，并初步分析了其休眠性表达的机理。在10，15，20，25，30℃的黑暗条件下，选用新收获的13 个青稞品种为材料进行籽粒发芽实验，以发芽指数（GI）评价其休眠性。结果发现，不同品种对温度敏感性不同，其中温度不敏感品种，在各温度条件下均表现很低的休眠性；而温度敏感品种，其休眠性表达受低温抑制，受高温诱导。15℃至25℃是进行青稞休眠性鉴定的较适宜的温度范围。通过对供试材料发芽后的α-淀粉酶活性，发现温度对青稞种子的休眠性表达的影响至少在一定程度上表现在对α-淀粉酶活性的调控上。随后，对分别在马尔康和成都进行种植的34 份青稞穗发芽指数（SI），穗发芽率（SR），籽粒发芽指数（GI）和α-淀粉酶活性（AA）进行了测定和分析，发现它们均受基因型×栽培地点的极显著影响，且四个参数之间具有一定相关性。GI 参数由于其变异系数较低，在不同栽培地点稳定性好，且操作简便，是较可靠和理想的穗发芽评价参数。SI 参数可作为辅助，区别籽粒休眠性相似的材料（基因型）或全面评价材料（基因型）的穗发芽抗性特征。AA 参数稳定性较差，并且检测方法复杂，因此不建议在育种及大量材料筛选和评价时使用。此外，青稞穗发芽抗性受环境影响较大，评价时应考虑到尽可能多的抗性影响因素及其在不同栽培条件下的变异。 2. 对来自青藏高原的青稞穗发芽抗性特征及其与其它农艺性状间的关系进行研究。通过测定穗发芽指数（SI）、籽粒发芽指数（GI）和α-淀粉酶活性（AA），表明113 份青稞材料的穗发芽抗性具有显著差异。SI、GI 和AA 参数的变幅分别为1.00~8.86、0.01~0.97 和0.00~2.76，其均值分别为4.72、0.63 和1.22。根据SI 参数，六个基因型，包括‘XQ9-5’，‘XQ33-9’，‘XQ37-5’，‘XQ42-9’，‘XQ45-7’和‘JCL’被鉴定为抗性品种。综合SI、GI 和AA 参数，可以发现青稞的穗发芽抗性机制包含颖壳等穗部结构的抗性和种子自身的抗性（即种子休眠性），且供试材料中未发现较强的胚休眠品种，除‘XQ45-7’外，所有品种在发芽第四天均能检测出α-淀粉酶活性。穗部结构和种子休眠的抗性机制因基因型不同而不同，在穗发芽抗性中可单独作用或共同作用。农家品种和西藏群体分别比栽培品种和四川群体的穗发芽抗性强，而在不同籽粒颜色的青稞中未发现明显差异。相关性检验发现，青稞的穗发芽抗性，主要是种子休眠性，与百粒重、开花期、成熟期、穗长、芒长和剑叶长呈显著负相关关系，与株高相关性不显著。农艺性状可以作为穗发芽抗性材料选育中的辅助指标。本试验为青稞穗发芽抗性育种研究提供了必要的理论基础和可供使用的亲本材料。 3. α-淀粉酶是由多基因家族编码的蛋白质，在植物种子萌发时高度表达，与植物种子的萌发能力密切相关。在大麦种子发芽时，高等电点α-淀粉酶的活性远大于低等电点的α-淀粉酶。为了研究不同穗发芽抗性青稞品种中编码高等电点α-淀粉酶Amy1 基因结构与抗性间的关系，我们以筛选得到的抗性品种‘XQ32-5’（TR1）、‘XQ37-5’（TR2）、‘XQ45-7’（TR3），易感品种‘97-15’（TS1）、‘9657’（TS2）以及强休眠大麦品种‘SAMSON’（SAM）为材料，对其Amy1 基因的编码区序列进行克隆和结构分析，并对它们推导的氨基酸序列进行比较。结果显示，青稞Amy1 基因具有三个外显子、两个内含子，编码区中有13 个核苷酸变异位点，均位于2、3 号外显子，2 个变异位点位于2 号外显子。SAM 和TS1 分别在2 号外显子相应位置有5 个相同的碱基(GAACT)的插入片段。相应α-淀粉酶氨基酸序列推导发现，所有核苷酸变异中有8 个导致相应氨基酸残基的改变，其余位点为同义突变。青稞Amy1 基因编码区序列品种间相似度高达99%以上，部分序列变异可能与其穗发芽抗性有关。随后，我们又通过SYBR Green 荧光定量技术对该基因在不同发芽时间（1d~7d）的相对表达水平进行了差异性检测。结果发现，7 天内不能检测到SAM 的Amy1 基因表达，5 个青稞品种间的Amy1 基因的相对表达量均随着发芽时间延长而上升，但上升方式有所不同。弱抗品种该基因表达更早，转录本增加速率更大，且在4~5 天可达到平台期。发芽7 天中，抗性品种总转录水平明显低于易感品种。本研究结果表明，青稞Amy1 基因的转录水平是与其穗发芽抗性高度相关。 我国青藏高原青稞，尤其是农家品种的穗发芽抗性具有丰富的变异，蕴藏着穗发芽抗性育种的宝贵资源。本研究为青稞穗发芽抗性育种建立了合理抗性评价体系，筛选出可供育种使用的特殊材料，阐明了农艺性状可辅助穗发芽抗性育种，同时还对穗发芽抗性与α-淀粉酶基因的结构和表达关系进行分析，为青稞穗发芽抗性资源筛选奠定了基础。 Preharvest sprouting (PHS) is a serious problem in crop production. It often takes place when encountering damp, cold conditions at harvest time and results in the decrease of grain quality and great loss of yield by triggering the synthesis of endosperm degrading enzymes (mostly the α-amylase). Therefore, PHS is regarded as an important criterion for crop breeding. In order to minimize the risk of PHS, resistant genotypes are highly required. Hulless barley (Hordeum vulgare ssp. vulgare) is the staple food crop in Qinghai-Tibetan Plateau from of old, where is one of the origin and genetic diversity centers of hulless barley. Recently, interest in hulless barley has been sparked throughout the world due to the demonstrations of its great potential in health food industry and fuel alcohol production. Indeed, hulless barley can also be utilized to produce good quality malt if the appropriate malting conditions are used. In China, overcast and rainy conditions often occur at maturity of hulless barley and cause an adverse on its production and application. PHS resistant genotypes, therefore, are highly required for the hulless barley breeding programs. However, few investigations have been made so far on this issue. The objectives of this study were: 1) to assessment of methods used in testing preharvest sprouting resistance in hulless barley; 2) to evaluate the variability and characteristics of PHS resistance of hulless barley from Qinghai-Tibet Plateau in China; 3) to select potential parents for PHS resistance breeding; 4) to primarily study on the molecular mechanism of PHS resistance of hulless barley. Our results are as followed: 1. We investigated the temperature effects on seed germination and seed dormancy expression of hulless barley, discussed appropriate temperature range for screening of PHS resistant varieties, and analyzed the mechanism of seed dormancy expression of hulless barley. The dormancy level of 13 hulless barley were evaluated by GI (germination index) values calculating by seed germination tests at temperature of 10，15，20，25，30℃ in darkness. There were great differences in temperature sensitivity among these accessions. The insensitive accessions showed low dormancy at any temperature while the dormancy expression of sensitive accessions could be restrained by low temperature and induced by high temperature. The temperature range of 15℃ to 25℃ was workable for estimating of dormancy level of hulless barley according to our data. Analysis of α-amylase activity showed that the temperature effects on seed germination and the expression of seed dormancy be achieved probable via regulating of α-amylase activity. Furthermore, we evaluated the differences in sprouting index (SI), sprouting rate (SR), germination index (GI) and α-amylase activity (AA) between Maerkang and Chengdu among 34 accessions of hulless barley from Qinghai-Tibetan Plateau in China. These PHS sprouting parameters were significantly affected by accession×location, and they had correlation between each other. GI was the most reliable parameter because of its low CV value, good repeatability and simple operation. SI could assist in differentiating between accessions of similar dormancy or overall evaluation of the resistance. AA was bad in repeatability and had relatively complex testing method, therefore, not appropriate for breeding and evaluation and screening of PHS resistant materials. Besides, since PHS resistance of hulless barley was greatly influenced by its growth environment, possibly much influencing factors and variations between cultivated conditions should be considered. 2. In this study, large variation was found among 113 genotypes of hulless barley (Hordeum vulgare ssp.vulgare) from Qinghai-Tibetan Plateau in China, based on the sprouting index (SI), germination index (GI) and α-amylase activity (AA) which derived from sprouting test of intact spikes, germination test of threshed seeds and determination of α-amylase activity, respectively. The range of SI, GI and AA was 1.00~8.86, 0.01~0.97 and 0.00~2.76，the mean was 4.72, 0.63 and 1.22 espectively. Six resistant genotypes, including ‘XQ9-5’, ‘XQ33-9’, ‘XQ37-5’, ‘XQ42-9’, ‘XQ45-7’ and ‘JCL’, were identified based on SI. Integrating the three parameters, it was clear that both hulls and seeds involved in PHS resistance in intact spikes of hulless barley and there was no long-existent embryo dormancy found among the test genotypes. All the genotypes, except ‘XQ45-7’, had detectable α-amylase activity on the 4th day after germination. There was PHS resistance imposed by the hull and seed per se and the two factors can act together or independent of each other. Besides, landraces or Tibet hulless barley had a wider variation and relatively more PHS resistance when compared with cultivars or Sichuan hulless barley. No significant difference was found among hulless barley of different seed colors. The correlation analysis showed PHS resistance was negatively related to hundred grain weight, days to flowering, days to maturity, spike length, awn length and flag length but not related to plant height. This study provides essential information and several donor parents for breeding of resistance to PHS. 3. Alpha-amylase isozymes are encoded by a family of multigenes. They highly express in germinating seeds and is closely related to seed germination ability. In barley germinating seeds, the activity of high pI α-amylase is much higher than low pI α-amylase. The aim of this study was to determine the relationship between preharvest sprouting resistance of hulless barley and the gene structure of Amy1 gene which encodes high pI α-amylase. The coding region and cDNA of Amy1 gene of three resistant accessions, including ‘XQ32-5’ (TR1), ‘XQ37-5’ (TR2), ‘XQ45-7’ (TR3), two susceptible accessions ‘97-15’ (TS1), ‘9657’ (TS2) and one highly dormant barley accession ‘SAMSON’ (SAM) was cloned. Analysis of their DNA sequences revealed there were three exons and two introns in Amy1 gene. Thirteen variable sites were in exon2 and exon3, 2 variable sites were in intron2. SAM and TS1 had a GAACT insert segment in the same site in intron2. Only 8 variable sites caused the change of amino acid residues. There were 99% of similarity between the tested hulless barley and some of the variable sites might be related with preharvest sprouting resistance. Then, we investigated the expression level of Amy1 gene in the 7-day germination test. Results of quantitative real-time PCR indicated that the relative expression trends of Amy1 gene were the same but had significant differences in the increase fashion between hulless barleys and no detectable expression was found in SAM. Susceptible accessions had earlier expression and faster increase and reached the maximum on day 4 ~ day 5. Besides, total transcripts level was found lower in resistant accessions than susceptible accessions. This study indicated that α-amylase activity was highly related to the transcription level of Amy1 gene which not correlated to missense mutation sites. In conclusion, hulless barley, especially the landraces from Qinghai-Tibetan Plateau in China possesses high degree of variation in PHS performance, which indicates the potential of Tibetan hulless barley as a good source for breeding of resistance to PHS. This study provides several donor parents for breeding of resistance to PHS. Our results also demonstrate that agronomic traits may be used as assistants for PHS resistance selection in hulless barley. Besides, analysis of high pI α-amylase coding gene Amy1 revealed the relative high expression of was Amy1 one of the mainly reason of different PHS resistance level in hulless barley.

Calculation of bulk modulus on carbon nitrides with chemical bond method

The bulk moduli of some superhard materials were calculated by using the chemical bond method. For simple crystals, such as diamonds, c-BN, SiC, Si, BP, and Ge, the calculated results agree with experimental and theoretical values. For crystals of complex structure, such as beta-BC2N crystal and various structural C3N4 crystals, the results indicate that their bulk moduli are large, but do not exceed that of diamond.

Novel acidic porous clay heterostructure with highly ordered organic-inorganic hybrid structure: one-pot synthesis of mesoporous organosilica in the galleries of clay

A new class of organic-inorganic hybrid porous clay heterostructures (HPCHs) have been prepared through the surfactant-directed assembly of organosilica in the galleries of montmorillonite. The reaction involved hydrolysis and condensation of phenyltriethoxysilane and tetraethoxysilane in the presence of intragallery surfactant templates (dodecylame and cetyltrimethylammonium ion). The surfactant templates were removed from the pores by solvent-extraction. The products were characterized by X-ray diffraction (XRD), N-2 adsorption, solid-state Si-29 and C-13 NMR, and FTIR. XRD patterns indicated a regular interstratification of the clay layers for HPCHs. Depending on loading of phenyl groups, HPCHs had BET surface areas of 390-771 m(2) g(-1), pore volumes of 0.3-0.59 cm(3) g(-1), and the framework pore sizes in the supermicropore to small mesopore range (1.2-2.6 nm). HPCHs were hydrophobic and acidic.

A NMR-STUDY OF THE INTERACTION OF SILICA WITH DIPALMITOYLPHOSPHATIDYLCHOLINE LIPOSOMES

The interaction of silica with dipalmitoylphosphatidylcholine (DPPC) liposomes has been studied by detecting H-1 and 2D NOESY NMR spectra and measuring proton spin-lattice relaxation time (T-1). The antagonistic effect of aluminium citrate on silica has also been studied by measuring the proton T-1 values, The results show that silica particles mainly bind to the phosphate moiety of the polar headgroup of DPPC bilayers through hydrogen bonds between Si-OH and O-P groups, but they have no significant effect on the conformation of the choline group of the polar headgroup, The addition of silica particles decreases the mobilities of the hydrocarbon chains slightly, Proton T-1 data also indicate that aluminium citrate reduces the effect of silica, A possible mechanism for the toxicity of silica and the antagonistic effect of aluminium titrate on silica is suggested. (C) 1995 Academic Press Inc.

AMPEROMETRIC DETECTION OF CATECHOLAMINES WITH LIQUID-CHROMATOGRAPHY AT A NOVELLY CONSTRUCTED PRUSSIAN BLUE CHEMICALLY MODIFIED ELECTRODE

A novel Prussian blue chemically modified electrode (CME) was constructed and characterized for liquid chromatography electrochemical detection (LCEC) of catecholamines. Both anodic and cathodic peaks could be obtained by monitoring at constant applied potential at anodic and slightly cathodic potential ranges (0.3-0.7 and -0.2-0.1 V vs. SCE), respectively. When arranged in a series configuration, using the modified electrodes as generating and collecting detectors, extremely high effective collection efficiencies of 0.91 (for norepinephrine) and 0.58 (for dihydroxyphenylacetic acid) were achieved in dual-electrode LCEC for catecholamines; and a linear response range over 3 orders of magnitude and a detection limit of 10 pg were obtained with a downstream CME as the indicating detector.

In vitro iron enrichment experiments in the Prydz Bay, the Southern Ocean: A test of the iron hypothesis

In "high nitrate, low chlorophyll" (HNLC) ocean regions, iron has been typically regarded as the limiting factor for phytoplankton production. This "iron hypothesis" needs to be tested in various oceanic environments to understand the role of iron in marine biological and biogeochemical processes. In this paper, three in vitro iron enrichment experiments were performed in Prydz Bay and at the Polar Front north of the Ross Sea, to study the role of iron on phytoplankton production. At the Polar Front of Ross Sea, iron addition significantly (P < 0.05, Student's t-test) stimulated phytoplankton growth. In Prydz Bay, however, both the iron treatments and the controls showed rapid phytoplankton growth, and no significant effect (P > 0.05, Student's t-test) as a consequence of iron addition was observed. These results confirmed the limiting role of iron in the Ross Sea and indicated that iron was not the primary factor limiting phytoplankton growth in Prydz Bay. Because the light environment for phytoplankton was enhanced in experimental bottles, light was assumed to be responsible for the rapid growth of phytoplankton in all treatments and to be the limiting factor controlling field phytoplankton growth in Prydz Bay. During the incubation experiments, nutrient consumption ratios also changed with the physiological status and the growth phases of phytoplankton cells. When phytoplankton growth was stimulated by iron addition, N was the first and Si was the last nutrient which absorption enhanced. The Si/N and Si/P consumption ratios of phytoplankton in the stationary and decay phases were significantly higher than those of rapidly growing phytoplankton. These findings were helpful for studies of the marine ecosystem and biogeochemistry in Prydz Bay, and were also valuable for biogeochemical studies of carbon and nutrients in various marine environments.

黄土高原风成沉积和风化作用对黄土一古土壤地球化学组成的控制

Geochemical analyses have been carried out on the samples taken from the last 250 ka wind-blown loess-paleosol sequences at Huanxian, Xifeng, Changwu, and Lantian in central Chinese Loess Plateau. The result shows: 1) that major changes in chemical composition of the loess-paleoso! sequences are due to leaching and reprecipitation of carbonates, and resulted from dust grain size changes rather than chemical weathering of silicates; 2) that Si/Ti, Si/AI, and Si/Fe ratios can be used as a proxy of dust deposition intensity, and Na/AI ratio can also be used as indicator of climatic changes in genera! rather than of the summer monsoon intensity. Our results show that chemical composition was controlled by dust deposition and weathering, and imply changes of climate and environment in the Loess Plateau during last 250,000 years.