Synthesis and characterization of functionalized mesoporous silica by aerosol-assisted self-assembly

An efficient, productive, and low-cost aerosol-assisted self-assembly process has been developed to produce organically modified mesoporous silica particles via a direct co-condensation of silicate species and organosilicates that contain nonhydrolyzable functional groups in the presence of templating surfactant molecules. Different surfactants including cetyltrimethylammonium bromide, nonionic surfactant Brij-56, and triblock copolymer P123 have been used as the structure-directing agents. The organosilanes used in this study include tridecafluoro-1, 1,2,2-tetrahydrooctyltriethoxysilane, methytriethoxysilane, vinyltrimethoxysilane, and 3-(trimethoxysilyl)propyl methacrylate. X-ray diffraction and transmission electron microscopy studies indicate the formation of particles with various mesostructures. Fourier transform infrared and solid-state nuclear magnetic resonance spectra confirm the organic ligands are covalently bound to the surface of the silica framework. The porosity, pore size, and surface area of the particles were characterized using nitrogen adsorption and desorption measurements.

A transparent thin film with hexagonal mesostructure containing rhodamine 6G

A transparent thin film was prepared by depositing the sol-get mixture for the synthesis of MCM-41 mesoporous molecular sieve doped with rhodamine 6G (R6G) dye on glass substrates. The film of silica-surfactant-R6G materials, which was identified to possess hexagonally ordered mesostructure, was composed of nanocrystallites about 35 nm in diameter and 1-10 mum in thickness. Cleanness of the substrates, concentration of the sol-gel mixture and rate of evaporation of the solvent were the key factors affecting transparency and homogeneity of the film. Moreover, optical change and lack in dye aggregation were observed to the R6G-functionalized MCM-41 thin film in contrast with that in ethanol solution.

Strong visible up-conversion emissions and thermometric applications of Er3+-Yb3+ codoped Al2O3 prepared by the sol-gel method

The Er3+-Yb3+ codoped Al2O3 has been prepared by the sol-gel method using the aluminium isopropoxide [Al(OC3H7)(3)]-derived Al2O3 sols with addition of the erbium nitrate [Er(NO3)(3) center dot 5H(2)O] and ytterbium nitrate [Yb(NO3)(3) center dot 5H(2)O]. The phase structure, including only two crystalline types of doped Al2O3 phases, theta and gamma, was obtained for the 1 mol% Er3+ and 5 mol% Yb3+ codoped Al2O3 at the sintering temperature of 1,273 K. By a 978 nm semiconductor laser diodes excitation, the visible up-conversion emissions centered at about 523, 545, and 660 nm were obtained. The temperature dependence of the green up-conversion emissions was studied over a wide temperature range of 300-825 K, and the reasonable agreement between the calculated temperature by the fluorescence intensity ratio (FIR) theory and the measured temperature proved that Er3+-Yb3+ codoped Al2O3 plays an important role in the application of high temperature sensor.

Comparative Study Of The Influence Of Natural Convection On Directional Solidification Of Al-3.5 Wt% Ni And Al-7 Wt% Si Alloys

We present numerical simulations of thermosolutal convection for directional solidification of Al-3.5 wt% Ni and Al-7 wt% Si. Numerical results predict that fragmentation of dendrite arms resulting from dissolution could be favored in Al-7 wt% Si, but not in Al-3.5 wt% Ni. Corresponding experiments are in qualitative agreement with the numerical predictions. Distinguishing the two fragmentation mechanisms, namely dissolution and remelting, is critical during experiments on earth, when fluid flow is dominant. (C) 2007 COSPAR. Published by Elsevier Ltd. All rights reserved.

High-performance 4H-SiC based metal-semiconductor-metal ultraviolet photodetectors with Al2O3 SiO2 films

4H-silicon carbide (SiC) metal-semiconductor-metal (MSM) ultraviolet (UV) photodetectors with Al2O3/SiO2 (A/S) films employed as antireflection/passivation layers have been demonstrated. The devices showed a peak responsivity of 0.12 A/W at 290 nm and maximum external quantum efficiency of 50% at 280 nm under 20 V electrical bias, which were much larger than conventional MSM detectors. The redshift of peak responsivity and response restriction effect were found and analyzed. The A/S/4H-SiC MSM photodetectors were also shown to possess outstanding features including high UV to visible rejection ratio, large photocurrent, etc. These results demonstrate A/S/4H-SiC photodetectors as a promising candidate for OEIC applications. (C) 2008 American Institute of Physics.

Correlation between optical and structural properties of (Al,Ga)N layers grown by MOCVD

For both, (Al,Ga)N with low Al content grown on a GaN nucleation layer and (AI,Ga)N with high Al content gown on an AlN nucleation layer, the inhomogeneous distribution of the luminescence is linked to the distribution of defects, which may be due to inversion domains. In the former system, defect regions exhibit a much lower Al content than the nominal one leading to a splitting of the respective luminescence spectra. In the latter system, a domain-like growth is observed with a pyramidal surface morphology and non-radiative recombination within the domain boundaries. (c) 2007 WILEYNCH Verlag GmbH & Co. KGaA, Weinheim.

Pockels effect in GaN/Al-x,Gal(1-x)N superlattice with different quantum structures - art. no. 69841G

The linear electro-optic (Pockels) effect of wurtzite gallium nitride (GaN) films and six-period GaN/AlxGa1-xN superlattices with different quantum structures were demonstrated by a polarization-maintaining fiber-optical Mach-Zehnder interferometer system with an incident light wavelength of 1.55 mu m. The samples were prepared on (0001) sapphire substrate by low-temperature metalorganic chemical vapor deposition (MOCVD). The measured coefficients of the GaN/AlxGa1-xN superlattices are much larger than those of bulk material. Taking advantage of the strong field localization due to resonances, GaN/AlxGa1-xN SL can be proposed to engineer the nonlinear responses.

Low Power Integrated Circuits for Wireless Neural Recording Applications

A group of prototype integrated circuits are presented for a wireless neural recording micro-system. An inductive link was built for transcutaneous wireless power transfer and data transmission. Power and data were transmitted by a pair of coils on a same carrier frequency. The integrated receiver circuitry was composed of a full-wave bridge rectifier, a voltage regulator, a date recovery circuit, a clock recovery circuit and a power detector. The amplifiers were designed with a limited bandwidth for neural signals acquisition. An integrated FM transmitter was used to transmit the extracted neural signals to external equipments. 16.5 mW power and 50 bps - 2.5 Kbps command data can be received over 1 MHz carrier within 10 mm. The total gain of 60 dB was obtained by the preamplifier and a main amplifier at 0.95Hz - 13.41 KHz with 0.215 mW power dissipation. The power consumption of the 100 MHz ASK transmitter is 0.374 mW. All the integrated circuits operated under a 3.3 V power supply except the voltage regulator.

A 12-bit 300 MHz CMOS DAC for high-speed system applications

This paper describes a 12-bit 300 MHz CMOS DAC for high-speed system applications. The proposed DAC consists of a unit current-cell matrix for 8 MSBs and a binary-weighted array for 4 LSBs. In order to ensure the linearity of DAC, a double Centro symmetric current matrix is designed by using the Q(2) random walk strategy. To minimize the feedthrough and improve the dynamic performance, the drain of the switching transistors is isolated from the output lines by adding two cascoded transistors.

熔盐电解法制备Al-Li合金的应用基础研究及其工艺初探

Al-Li合金是近年发展起来的新型航空材料，具有低密度、高强度的特点。目前世界上正就如何进一步提高其断裂韧性，使Al-Li合金尽早走出实验室，获得实际用进行广泛，深入的研究。熔盐电解法就是在这种情况下发展起来的。虽然此法现在尚处于研究的初级阶段，但已以其能够在较简单的设备上制备低Na高纯Al-Li合金的特点受到广泛的重视，是一种很有前途的发展方向。针对我国的技术、设备现状，在参考国外研究结果的基础上，采用熔盐电解法制备Al-Li母合金 → 应用合金的制备方法是可以尽快赶上世界发步伐的有效途径。因此，本文作为整个熔盐电解制备Al-Li合金系统研究的一部分，针对目前在此领域中很多应用基础问题，诸如：作为新的电解体系正在探索中的LiCl-KCl-LiF三元相图，Li在液体Al阴极中的扩散系数，利用熔盐电解法制备低Na高纯Al-Li合金的热力学基础及如何克服LiCl强烈的吸水性给电解工艺带来的种种不便等均未得到系统研究的现状，设计完成了一系列有关熔盐电化学和热力学实验，填补了本领域的一些研究空白，并为进一步系统研究工艺条件提供了重要的参考数据。1．用NH_4Cl氯化Li_2CO_3的研究 根据热力学从理论上论证了在200 ℃左右下述氯化反应：Li_2CO_3 + 2NN_4Cl = 2LiCl + 2NH_3~↑ + H_2O~↑ + CO_2~↑可以进行完全。利用DSC方法测定反应产物LiCl的纯度，并用离子色谱法分析反应产物中CO_3~=的含量，结果均证明：在Li_2CO_3:NH_4Cl = 1:4 (mol)时，Li_2CO_3可以定量转化为LiCl，剩余的NH_4Cl完全分解。根据热重分析结果推测NH_4Cl氯化Li_2CO_3的反应历程为：Li_2CO_3 + 2NH_4Cl = 2LiCl + 2NH_3~↑ + H_2O~↑ + CO_2~↑ NH_4Cl = HCl~↑ + NH_3~↑ 而并非是想像中的：NH_4Cl = HCl~↑ + NH_3~↑ 2HCl + Li_2CO_3 = 2LiCl + H2O~↑ + CO_2~↑利用X－射线衍射方法分析产物，结果亦说明氯化可以成功。将1:4（mol）= Li_2CO_3:NH_4Cl混合样品在差热分析反应炉中直接加热测定反应产物LiCl的溶点，并与纯LiCl样品熔点的测定结果相比较，二者完全一致。以上结果说明：不仅可用此氯化反应产物代替LiCl应用于熔盐电解制备Al-Li合金中，而且还可将其应用于LiCl体系的相图测定中。因Li_2CO_3，NH_4Cl均不吸水，极易处理，因此以上研究结果无论对于Al-Li合金的工艺研究还是其他有关LiCl体系的基础研究都是很有价值的。2．直接氯化法制备LiCl-KCl-LiF三元相图的研究。LiCl-KCl-LiF三元相图是研究此体系电解机制的重要基础。为将以上直接氯化法应用于差热分析中制作此三元体系相图，首先用直接氯化法测定了三个已知二元LiCl体系相图：LiCl－KCl；LiCl-LiF；LiCl-NaCl。与文献结果吻合很好。说明将此法应用于差热分析中制作LiCl体系相图结果是可靠的。在LiCl-KCl-LiF三元相图的测定中共做出七个垂直截面，在各截面上读出等温条件下的相界点投影到浓度三角形中，得到等温投影图。结果说明LiCl-KCl-LiF是固态完全不互溶的三元共晶体系，共有三个液－固两相区；三个液－固－固三相区；一个液－固－固－固四相区，（三元共晶平面）和一个固－固－固三相区。四相点温度为348 ℃，其组成在三相平衡线的交点处，在实验上测出近似等于：41.4KCl + 57.3LiCl + 1.3LiF (mol)。3．氯化物体系中Li~+, Na~+析出电位的比较及其去极化作用的研究。在正常电化序中，Li~+应先于Na~+析出。但在以Al作阴极电解LiCl体系时，则由于Li~+在Al上有较强的去极化作用而提前析出。这是熔盐电解法可以制备低Na，高纯Al-Li合金的基础。本文在理论上对此问题进行了较深入的研究。具体内容包括（1）。测定Li~+, Na~+在二元氯化物体系中的析出电位。通过在Al阴极，Mo阴极上二离子析出电位的比较，确认了Li~+在Al阴极上产生很强的去极化作用是能利用电解法制备低Na高纯Al-Li合金的根本原因。并为在工艺研究中选择合适的电流密度提供了参考依据。（2）．根据热力学理论推导出合金化反应产生的自由焓变化与去极化作用的关系：ΔG_x + ΔG_m = -nFΔE。揭示了产生去极化作用的原因。并根据ΔG_x（偏摩尔过剩自由焓）与合金结构的关系提出可以利用二元合金相图推测极化类型及极化大小。并根据动力学原理对温度对极化的影响提出了自己的看法。（3）．求出合金化反应的热效应，认为在一定条件下亦可利用此值作为判断去极化作用大小的标准。（4）．测定Li~+, Na~+在Al-Cu, -Al-RE合金上的析出电位。结果表明Cu，RE的存在均可加强Li~+在阴极上的去极化作用，进一步加大了Li~+, Na~+析出电位之间的差别，有利于制备更纯的Al-Li 使金。为直接生产Al-Cu-Li, Al-RE-Li三元母合金奠定了基础。（5）测定Li~+在不同组成配比的LiCl-KCl熔体中，在Al阴极上的析出电位，并求出LiCl的离子平均活度系数γ＝0.71 (T = 740 ℃), 熔体对理想状态产生负偏离。4．利用阳极计时电位法测定T＝720 ℃时Li在液体Al中的扩散系数D_(Li/Al) = 4.94 * 10~(-5)cm~2·s~(-1)，与利用Stocks-Einstan公式计算出的理论值D_(Li/Al) = 4.85 * 10~(-5)cm~2·s~(-1)吻合较好。5．在上述理论研究的基础之上进行了工艺初探，所得初步结论有：（1）．加入LiF可以提高电效。（2）．采用电流密度为1 A/cm~2时，不加搅拌亦可制备出成份均匀，含Li量为10％（w.f）的Al-Li合金。（3）．根据实验结果提出 Li在熔体中的熔解可能是影响电流效果的主要原因。

25MeV/u ~(40)Ar+~(115)In,~(58)Ni,~(27)Al反应中前中角区碎片角分布和元素Z分布

测量了 ２５ＭｅＶ／ｕ４０　Ａｒ＋１１５　Ｉｎ，５８　Ｎｉ，２７　Ａ１反应前中角区出射碎片的角分布和 元素 Ｚ分布．用改进的量子分子动力学（ＭＱＭＤ）模型研究了碎片的角分布和 Ｚ 分布．理论计算值和实验值整体上符合得很好，但在前角区，ＭＱＭＤ模型低估 了碎片的产额，在中角区对于Ｚ接近弹核的碎片，理论计算值比实验值偏高．碎 片产物的角分布和Ｚ分布还与统计蒸发模型ＧＥＭＩＮＩ进行了比较，结果表明，在 前角区平衡蒸发成份所占的比例很小，中角区所占的比例有所增加，但仍然是较 小的比例．同时发现平衡蒸发成份随着出射碎片核电荷数Ｚ的减小而逐渐减 少．

Fe3O4 magnetic nanoparticles as peroxidase mimetics and their applications in H2O2 and glucose detection

Artificial enzyme mimetics are a current research interest because natural enzymes bear some serious disadvantages, such as their catalytic activity can be easily inhibited and they can be digested by proteases. A very recently study reported by Yan et al. has proven that Fe3O4 magnetic nanoparticles (MNPs) exhibit an intrinsic enzyme mimetic activity similar to that found in natural peroxidases, though MNPs are usually thought to be biological and chemical inert (Gao, L. Z.; Zhuang, J.; Nie, L.; Zhang, J. B.; Zhang, Y.; Gu, N.; Wang, T. H.; Feng, J.; Yang, D. L.; Perrett, S.; Yan, X. Y. Nat. Nanotechnol. 2007, 2, 577-583).

Nanostructured novel cemented hard alloy obtained by mechanical alloying and hot-pressing sintering and its applications

A novel cemented carbides (W0.8Al0.2)C-0.7-Co with different cobalt contents were prepared by mechanical alloying and hot-pressing technique. Hot-pressing technique as a common technique was performed to fabricate the bulk bodies of the hard alloys. The novel cemented carbides have superior mechanical properties compared with WC-Co. The density, operate cost of the novel material were much lower than WC-Co system. The novel materials were easy to process nanoscale sintering and get the rounded particles in the bulk materials.