Measurement of gain spectrum for Fabry-Perot semiconductor lasers by the Fourier transform method with a deconvolution process

To improve the accuracy of measured gain spectra, which is usually limited by the resolution of the optical spectrum analyzer (OSA), a deconvolution process based on the measured spectrum of a narrow linewidth semiconductor laser is applied in the Fourier transform method. The numerical simulation shows that practical gain spectra can be resumed by the Fourier transform method with the deconvolution process. Taking the OSA resolution to be 0.06, 0.1, and 0.2 nm, the gain-reflectivity product spectra with the difference of about 2% are obtained for a 1550-nm semiconductor laser with the cavity length of 720 pm. The spectra obtained by the Fourier transform method without the deconvolution process and the Hakki-Paoli method are presented and compared. The simulation also shows that the Fourier transform method has less sensitivity to noise than the Hakki-Paoli method.

An investigation on the pressure-induced phase transition of nanocrystalline ZnS

An in situ energy dispersive x-ray diffraction study on nanocrystalline ZnS was carried out under high pressure up to 30.8 GPa by using a diamond anvil cell. The phase transition from the wurtzite to the zinc-blende structure occurred at 11.5 GPa, and another obvious transition to a new phase with rock-salt structure also appeared at 16.0 GPa-which was higher than the value for the bulk material. The bulk modulus and the pressure derivative of nanocrystalline ZnS were derived by fitting the Birch-Murnaghan equation. The resulting modulus was higher than that of the corresponding bulk material, indicating that the nanomaterial has higher hardness than the bulk material.

High responsivity ultraviolet photodetector based on crack-free GaN on Si (111)

A Schottky-based metal-semiconductor-metal photodetector is fabricated on 1 mu m-thick, crack-free GaN on Si (I 11) substrate using an optimized AlxGal-xN/AlN complex buffer layer. It exhibits a high responsivity of 4600A/W at 366nm which may be due to both a crack-free sample and high internal gain. The relationship between responsivity and bias voltage is also investigated. The experiment results indicate that the responsivity increases with the bias voltage and shows a tendency to saturate. (c) 2007 WILEY-VCH Verlag GmbH &Co. KGaA, Weinheim.

Continuous-wave electrically injected InP/GaInAsP equilateral-triangle-resonator lasers

Equilateral-triangle-resonator (ETR) microlasers with an output waveguide connected to one of the vertices of the ETR are fabricated using standard photolithography and inductively-coupled-plasma etching techniques. Continuous-wave electrically injected 1550 nm ETR laser with side length ranged from 15 to 30 tm are realized at room temperature.

Electroabsorption modulated semiconductor optical amplifier monolithically integrated with spot-size converters

We have demonstrated an electroabsorption modulator (EAM) and semiconductor optical amplifier (SOA) monolithically integrated with novel dual-waveguide spot-size converters (SSCs) at the input and output ports for low-loss coupling to planar light-guide circuit silica waveguide or cleaved single-mode optical fiber. The device is fabricated by means of selective-area MOVPE growth (SAG), quantum well intermixing (QWI) and asymmetric twin waveguide (ATG) technologies with only three steps low-pressure MOVPE growth. For the device structure, in SOA/EAM section, double ridge structure was employed to reduce the EAM capacitances and enable high bit-rate operation. In the SSC sections, buried ridge stripe (BRS) were incorporated. Such a combination of ridge, ATG and BRS structure is reported for the first time in which it can take advantage of both easy processing of ridge structure and the excellent mode characteristic of BRS. At the wavelength range of 1550-1600 nm, lossless operation with extinction ratios of 25 dB DC and more than 10 GHz 3-dB bandwidth is successfully achieved. The beam divergence angles of the input and output ports of the device are as small as 8.0 degrees x 12.6 degrees, resulting in 3.0 dB coupling loss with cleaved single-mode optical fiber. (c) 2005 Elsevier B.V. All rights reserved.

Fabrication of a novel silica PLC hybrid integrated triplexer

A new-style silica planar lightwave circuit (PLC) hybrid integrated triplexer, which can demultiplex 1490-nm download data and 1550-nm download analog signals, as well as transmit 1310-nm upload data, is presented. It combines SiO2 arrayed waveguide gratings (AWGs) with integrated photodetectors (PDs) and a high performance laser diode (LD). The SiO2 AWGs realize the three-wavelength coarse wavelength-division multiplexing (CWDM). The crosstalk is less than 40 dB between the 1490- and 1550-nm channels, and less than 45 dB between 1310- and 1490- or 1550-nm channels. For the static performances of the integrated triplexer, its upload output power is 0.4 mW, and the download output photo-generated current is 76 A. In the small-signal measurement, the upstream 3-dB bandwidth of the triplexer is 4 GHz, while the downstream 3-dB bandwidths of both the analog and digital sections reach 1.9 GHz.

Dispersion characteristics of nanometer-scaled silicon rib waveguides

We investigate the dispersion properties of nanometer-scaled silicon waveguides with channel and rib cross section around the optical fiber communication wavelength and systematically study their relationship with the key structural parameters of the waveguide. The simulation results show that the introduction of an extra degree of freedom in the rib depth enables the rib waveguide more flexible in engineering the group velocity dispersion (GVD) compared with the channel waveguide. Besides, we get the structural parameters of the waveguides that can realize zero-GVD at 1550 nm.

公开可验证的零知识水印检测

对称水印方案的水印检测密钥可以被用来伪造和移去水印，因此要求它在检测过程中也是保密的．零知识的水印检测方案利用密码学中零知识和知识证明的思想和算法，实现在水印检测时使得验证者确信水印存在性的同时又不泄漏水印检测密钥．提出了公开可验证的零知识水印检测的安全需求，给出一个公开可验证的承诺方案和一个证明知道被承诺值的离散对数的零知识知识证明协议．在此基础上提出了一个公开可验证的零知识水印方案，并讨论了它的安全性．

Solid-core tellurite glass fiber for infrared and nonlinear applications

By optimizing glass composition and using a multistage dehydration process, a ternary 80TeO(2)-10ZnO-10Na(2)O glass is obtained that shows excellent transparency in the wavelength range from 0.38 mu m up to 6.10 mu m. Based on this optimized composition, we report on the fabrication of a single-mode solid-core tellurite glass fiber with large mode area of 103 mu m(2) and low loss of 0.24 similar to 0.7 dB/m at 1550 nm. By using the continuous-wave self-phase modulation method, the non-resonant nonlinear refractive index n(2) and the effective nonlinear parameter gamma of this made tellurite glass fiber were estimated to be 3.8x10(-1)9 m(2)/W and 10.6 W-1.m(-1) at 1550 nm, respectively. (C) 2009 Optical Society of America

新疆准噶尔盆地北缘中中新世阿特拉旱松鼠及其生态环境讨论

记述了新疆准噶尔盆地北缘中中新世哈拉玛盖组的两种阿特拉旱松鼠化石：Atlantoxerus junggarensis和A. xiyuensis sp. nov.。依据新的化石材料将A. junggarensis特征进行了修订。新种A. xiyuensis颊齿较小，齿冠低；P4大于或等于M1/2; 次尖明显，原小尖弱小或无，后小尖强大、明显大于后尖且一般不与后边脊相连，通常无中附尖；m3无下前边尖和前齿带，无下中尖、下中附尖和下次小尖，下后脊粗壮、由下原尖伸向跟凹、不与下后尖相连，下内尖及下内脊发育。Atlantoxerus属最早的化石记录出现在中亚地区，推测它很可能起源于中亚，然后向西亚、欧洲和北非地区扩散。依据伴生动物群和相关古植物的研究成果推测，Atlantoxerus属可能生活在温暖湿润的环境中。随着晚新生代全球气温变冷，该属的分布渐趋收缩，分异度减小，表明了其地理分布与温度变化密切相关。同时推测，温度对其生存的影响似乎比湿度更大。

基于silica波导光栅的单纤三向器的混合集成研究

通过有源实时监控系统,采用手动和自动相结合的方法,将光纤、silica基阵列波导光栅(AWG)、1310 nm激光器(LD)平台和1490 nm、1550 nm探测器(PD)平台用紫外同化胶混合集成为一新型单纤三向器.在耦合集成过程中,LD在15 mA偏置电流下,三向器的上行出纤功率大约为-4 dBm,LD和波导的耦合效率大约40%;当三向器输入1 550 nm光功率为1 mW,PD在2.6 V反向偏压下,下行输出光电流大约为76 μA,波导和PD的耦合效率大约为42%.三向器中采用了对管PD集成方法.

单纵模布里渊掺铒光纤激光器的实验研究

提出了一种具有多环形腔(MRC)和光纤布拉格光栅可调谐滤波器(FBG-TF)相结合的单纵模布里渊掺铒光纤激光器(BEDFL)。实验中通过观察激光器输出光的拍频信号分析其光谱精细结构,分别讨论了布里渊增益、FBG-TF、MRC对BEDFL单模输出的贡献,给出了激光器的功率特性曲线和波长稳定性测试图。实验得到了在1550 nm处功率为4 dBm,信噪比(SNR)>60 dB,线宽小于1.5 kHz的稳定单纵模输出光。

单纵模多环形腔掺铒光纤激光器及其稳定性

介绍了一种多环形腔结构(MRC)的单纵模(SLM)掺铒光纤激光器(EDFL)。这种激光器通过在主环形腔中插入充当模式滤波器的三个长度不等的无源次级环形腔, 并结合腔内光纤布拉格光栅(FBG)形成多环形腔掺铒光纤激光器结构, 多环形谐振腔可保证激光器的单纵模输出。讨论了使激光器运行在单纵模状态的谐振腔理论。同时, 为了提高系统输出的频率稳定性, 采用外光注入方法有效地抑制了模式跳变和拍噪声, 改善了输出谱特性。实验得到在1550.225 nm处输出功率约3.6 dBm, 信噪比(SNR)>35 dB的单纵模输出光, 且测得线宽小于500 Hz。