Phase reconstruction from three interferograms based on integral of phase gradient

A novel algorithm of phase reconstruction based on the integral of phase gradient is presented. The algorithm directly derives two real-valued partial derivatives from three phase-shifted interferograms. Through integrating the phase derivatives, the desired phase is reconstructed. During the phase reconstruction process, there is no need for an extra rewrapping manipulation to ensure values of the phase derivatives lie in the interval [-pi, pi] as before, thus this algorithm can prevent error or distortion brought about by the phase unwrapping operation. Additionally, this algorithm is fast and easy to implement, and insensitive to the nonuniformity of the intensity distribution of the interferogram. The feasibility of the algorithm is demonstrated by both computer simulation and experiment.

数控光学成形的计算机模拟及工艺实验

本文详细地介绍了以控制磨头驻留时间为基础的CCOS的基本原理、实现方法以及计算机模拟软件和工艺实验。在基本原理的基础上，着重研究解决了CCOS计算机模拟当中的两个关键问题“边缘效应”和计算效率的提高。首先，在分析计算磨头工作函数在边缘区域的变化以及边缘区域材料去除量变化规律的基础上，得到磨头在边缘区域驻留时间函数的修正函数。其次，对原有的模拟计算算法进行了改进，改进后算法的计算速度比原来快了十几倍从而大大提高了加工及检测的效率。另外还进行了CCOS的工艺实验研究，确定了CCOS抛光阶段的加工效率约为6×10~(-4)mm~3/sec为预计绝对加工时间提供了依据。

ESTIMATION OF THE STRAIN STATE OF GEXSI1-X/SI STRAINED-LAYER SUPERLATTICES BY DOUBLE-CRYSTAL X-RAY-DIFFRACTION

20-period strained-layer superlattices of nominal composition and width Ge0.2Si0.8 (5 nm)/Si(25 nm) and Ge0.5Si0.5 (5 nm)/Si(25 nm) were studied by double-crystal X-ray diffraction. The Ge content x was determined by computer simulation of the diffraction features from the superlattice. This method is shown to be independent of the relaxation of the superlattice. Alternatively, x can be obtained from the measured difference DELTAa/a in lattice spacing perpendicular to the growth plane. It is sensitive to the relaxation. Comparing the results obtained in these two different ways, information about the relaxation of the superlattices can be obtained.

THE DEPENDENCE OF THE INVERSION LAYER THICKNESS ON THE FILM THICKNESS IN THIN-FILM SOI STRUCTURES

The dependence of the inversion-layer thickness on the film thickness in thin-film SOI structure is analyzed theoretically by using computer simulation. A new concept and parameter, the critical thickness of thin film all-bulk inversion, is introduced for the design of thin-film MOS/SOI devices. It is necessary to select the film thickness T(s1) close to the all-bulk strong inversion critical thickness in order to get high-speed and high-power operation of ultra-thin film MOS/SOI devices.

A COMMON-CAVITY 2-SECTION INGAASP/INP BISTABLE LASER WITH A LOW OPTICAL SWITCHING POWER

The characteristics of the steady-state and the transient response to external light excitation of a common-cavity two-section (CCTS) bistable semiconductor laser is investigated. The results on the relation of light output versus light input, the wavelength match, optical amplification and optical switching are presented. Experimental results are compared to the results of a computer simulation.

Study of GSMBE growth and characteristics of high-quality strained In0.63Ga0.37As/InP quantum wells

High-quality compressively strained In0.63Ga0.37As/InP quantum wells with different well widths (1-11 nm) have been grown coherently on InP substrates using a home-made gas source molecular beam epitaxy (GSMBE) system. The indium composition in the wells of the sample was determined by means of high-resolution X-ray diffraction and its computer simulation. it is found that the exciton transition energies determined by photoluminescence (PL) at 10 K are in good agreement with those calculated using a deformation potential model. Sharp and intense peaks for each well can be well resolved in the 10 K PL spectra. For wells narrower than 4 nm, the line width of the PL peaks are smaller than the theoretical values of the line-width broadening due to 1 hit interface fluctuation, showing that the interface fluctuation of our sample is within 1 ML. For wells of 7 and 9 nm, the PL peak widths are as low as 4.5 meV.

Analysis of orthogonal memory patterns

It is well known that the storage capacity may be large if all memory patterns are orthogonal to each other. In this paper, a clear description is given about the relation between the dimension N and the maximal number of orthogonal vectors with components +/-1, and also the conception of attractive index is proposed to estimate the basin of attraction. Theoretic analysis and computer simulation show that each memory pattern's basin of attraction contains at least one Hamming ball when the storage capacity is less than 0.33N which is better than usual 0.15 N.

An improved BP algorithm for pattern recognition

An improved BP algorithm for pattern recognition is proposed in this paper. By a function substitution for error measure, it resolves the inconsistency of BP algorithm for pattern recognition problems, i.e. the quadratic error is not sensitive to whether the training pattern is recognized correctly or not. Trained by this new method, the computer simulation result shows that the convergence speed is increased to treble and performance of the network is better than conventional BP algorithm with momentum and adaptive step size.

Effects and numerical analysis of argon gas flow on the oxygen concentration in Czochralski silicon single crystal growth

Argon gas, as a protective environment and carrier of latent heat, has an important effect on the temperature distribution in crystals and melts. Numeric simulation is a potent tool for solving engineering problems. In this paper, the relationship between argon gas flow and oxygen concentration in silicon crystals was studied systematically. A flowing stream of argon gas is described by numeric simulation for the first time. Therefore, the results of experiments can be explained, and the optimum argon flow with the lowest oxygen concentration can be achieved. (C) 2002 Elsevier Science B.V. All rights reserved.

若尔盖湿地公路对两栖类的生态影响

本文考察了若尔盖高寒泥炭湿地公路对高原林蛙（Rana kukunoris）、倭蛙（Narorana pleskei）和岷山蟾蜍（Bufo minshanicus）的生态影响。分析了公路对两栖动物空间分布和栖息地利用的影响，并用IBM模型探讨其可能作用机制，考察了两栖动物公路死亡的季节差异及影响公路死亡空间分布的景观因素。最后通过对若尔盖高寒湿地两栖动物陆地核心栖息地的分析，为若尔盖路域栖息地的管理提供依据。 1. 对公路周边6个沼泽水凼群进行了调查，每个样地设置5条样线（距离公路10m、20m、50m、100m和150m）。调查表明，在繁殖季节(5月)，距离公路距离对高原林蛙和倭蛙的相对数量都有显著作用，其效应明显大于其他各项栖息地环境参数。公路导致高原林蛙和倭蛙在公路周边种群密度降低，其相对数量从距离公路100m处到公路边缘一直呈现逐渐降低的趋势。在繁殖季节，若尔盖高寒湿地的公路生态影响域大约在100-150m之间，这一距离远远大于森林栖息地中公路对两栖类的生态影响域（35-40 m）。 在繁殖后期（9月），对公路周边16个草地样点的样线调查表明，公路对周边高原林蛙和倭蛙密度分布并未造成显著影响。 2. 二次模型的拟合表明繁殖季节高原林蛙和倭蛙在公路周边的密度分布符合钟型曲线。前人对森林公路两侧两栖类分布的研究也显示了类似的规律。我们通过基于个体的模型，模拟在了公路边缘100单位距离内的栖息地空间，栖息地环境质量呈梯度变化，动物个体在其中通过随机运动寻找适宜的栖息地。拟合结果表明，动物个体仅仅依照简单的运动规则寻找适宜栖息地，这种活动就可以导致公路周边栖息地中的动物分布曲线出现3个局部峰。公路周边两栖动物的钟型分布曲线可能仅仅是个体寻找适宜栖息地过程中出现的临时性群体分布模式。 3. 在若尔盖高寒湿地，公路交通造成了大量两栖类死亡。但是公路两栖类动物死亡的季节分布很不均匀：5月、8月和9月死亡数量很高，而7月和10月死亡数量却很低。这种季节性差异和两栖类各个生活史阶段的迁移运动有密切的关系。利用景观参数的逻辑斯蒂回归模型显示，距离公路1000-2000m范围内的湿草地比例对三种两栖类公路死亡概率均有很强的贡献。湿草地这一栖息地类型分类中有大量的沼泽水体，是两栖类重要的繁殖点和取食点。两栖类公路死亡概率湿草地的关系从一个侧面表明，要维持一个区域较高的两栖类种群数量，需要1000-2000m半径范围内存在大面积的湿草地。 4. 高原林蛙和岷山蟾蜍不同性别和年龄个体分布点的水体距离存在显著差异。不同种类、年龄的两栖类分布点距离水体距离的差异可能是由于对水体的依赖性造成的。而相同种类、年龄段的个体中，高原林蛙雌性、岷山蟾蜍亚成体和雌性的体重与分布点距水体距离有显著负相关，这可能是因为体重更大的个体对水体的依赖性更弱。考虑到过大的陆地核心栖息地面积在实际保护工作中存在操作上的困难，因此我们认为可以以水体周边90%个体的分布区为低限确定3种两栖类的最小陆地核心栖息地。但是，在同样的水体距离-两栖类密度分布格局下，水体的面积和分形参数对最小陆地核心栖息地半径的确定有一定影响。 Ecological effects of alpine wetland road on Rana kukunoris, Narorana pleskei, Bufo minshanicus was studied in Zoige wetland. The effects of road on distribution of amphibians and its possible underline mechanism was discussed based on empirical data and computer simulation. Road killed amphibians was surveyed in different season and those landscape factor which could have impact on road killing distribution was analyses. Core terrestrial habitat of amphibians in Zoige wetland was discussed in the consideration of conservation management. 1. Six pool groups was investigated in breeding season (May) of R. kukunoris, N. pleskei. Five transects at distance of 10m, 20m, 50m, 100m and 150m from road edge was surveyed in each pool groups. There was a significant effects of distance from road edge on relative counts of R. kukunoris, N. pleskei, which is much important than effects of other environmental factors. Road caused the density of R. kukunoris, N. pleskei decreased from distance of 100m from road to 10m from road. Road ecological effect zone of alpine wetland for amphibians is about 100-150m. It is much wider than those of forest roads, which is about 35-40m. However, studies on 16 grassland near road showed no significant effect of road on amphibians after breeding season (Sep.). 2. Quadratic model fit indicated that the distribution of R. kukunoris and N. Pleskei followed a hump like curve. Previous studies on forest road showed similar results. A 100×100 habitat with gradual environment besides road was simulated with a individual-based model, and animal seek for suitable habitat with stochastic locomotion in it. Simulation results indicated that 3 density peak of animal distribution can emergent followed a simply rules. The hump like density cure could be a temporal swarm pattern during the process of individual seeking for habitat. 3. Road traffic caused mass death of amphibians in Zoige wetland. There was much road killed amphibians in May, Aug and Sep than those in July and Oct. The fluctuation of road kill could be related with migration of amphibians between seasons. Logistic regression of landscape variables indicated that wet grassland in 1000-2000m is essential to predict the probability of road kill. Wet grassland is an important breeding and forage habitat for amphibians. It also indicated that mass wet grassland in 1000-2000m is essential for maintain a big amphibian population. 4. There was significant differences among distance from aquatic site of subadults, female and males of R. kukunoris and B. Minshanicus. Possibly, it was because of their dependence on water. There was a significant negative relationship between distance from aquatic site and individuals body mass. Estimates of core habitat that are too large may make it difficult to establish protective regulations. The smallest suitable terrestrial core habitats were defined as the terrestrial habitats used during migration to and from the wetlands, and for foraging by 90% of any life stage (adults, and subadults) in a season. However, even with the same amphibian distribution pattern along the distance from aquatic sites, the radii of smallest suitable terrestrial core habitats will be varied with the fractal parameters of aquatic site.

HIRFL-CSR实验环高频同轴谐振腔设计原理

介绍了同步加速器高频铁氧体加载腔体的设计原理和设计计算过程。详细说明了腔体加载铁氧体材料的作用和意义,并对传统的传输线理论计算结果、CST(Computer Simulation Technol-ogy)软件模拟计算结果和实际腔体测量结果进行了比较。

CSR中束流变压器的分析设计及射频堆积计算机模拟程序

兰州重离子加速器冷却储存环（HIRFL－CSR），作为一个新型加速器，对监控它运行的探测器性能提出了新的要求，研制新型、高精度、高性能的探测器是CSR建立的必然要求。我们为它设计了两种基于二次电子的飞行时间探测器。该探测器具有极好的时间分辨、非常少的能损和多重散射。特别在超重粒子的合成试验中，探测超重粒子非常合适。本论文包括四个章节。第一章综述了飞行时间探测器技术，简单介绍了RIBLL的飞行时间系统和CSR的飞行时间系统以及测量飞行时间的基本原理；并简单介绍了CSR束流诊断系统束流诊断元件的分布、种类及参数和本论文的研究工作及意义。第二章是和本论文飞行时间探测器有关的一些知识。简要阐述了二次电子发射原理；并对探测器用到的主要放大元件微通道板作了详细介绍。第三章和第四章详细论述了研制的两种基于二次电子的飞行时间探测器。它们分别采用电场和磁场将二次电子偏转到微通道板上放大来得到时间信号。详细介绍了探测器的结构、参数；并测量了它们的时间分辨。此外，还研制了一种非拦截式的束流诊断元件一一容性相位探针，包括探针的结构及测试结果。

基于贝塞尔曲线的WSN等值线绘制算法

从无线传感器网络(WSN)环境数值监测应用的实际需求出发,提出了一种应用于该类场景中的等值线绘制(CMBC)算法.CMBC算法基于图形学中常用的贝塞尔(Bezier)曲线理论,通过选择部分节点提供信息给网关节点绘制等值线.此方法有效解决了监测应用场景中对最终监测精度的需求与大量报告节点所引发的高流量负载和网络能耗之间的矛盾.仿真结果表明,CMBC算法和已有研究工作相比能够使用更少的汇报节点完成高精度等值线的绘制,因此CMBC算法能够节省节点的能量,延长网络的生存期.

散景效果的真实感绘制

针对现有方法绘制的散景效果真实感较差的问题,提出一种基于几何光学理论的散景效果真实感绘制方法.该方法以光线传播的折射定律为基础,利用序列光线追踪方法对相机镜头的光学成像特性进行精确建模;对相机镜头的内部结构进行精确模拟,包括孔径光阑和渐晕光阑,以绘制出由孔径形状和渐晕共同作用的散景效果;利用几何光学理论和序列光线追踪方法精确计算出出射光瞳的位置和大小,以辅助光线采样,提高光线追踪效率.绘制结果表明,利用该方法能够绘制出较为逼真的散景效果,正确模拟了孔径形状和渐晕对散景效果的影响,并具有较高的光线追踪效率.