Homoepitaxial crystallization in films of a thermotropic liquid crystalline chloro-poly(aryl ether ketone)

The homoepitaxial crystallization in the films of a thermotropic liquid crystalline chloro-ply(aryl ether ketone) is studied by transmission electron microscopy (TEM) and electron diffraction (ED). The homoepitaxy takes place in the temperature range 330-320 degreesC, in which a highly-ordered smectic crystalline phase of the copolymer with a single-crystal-like banded structure is formed during the cooling process from the isotropic melt. The homoepitaxial crystallizations with angles of 32 degrees and 122 degrees between the two b axes are the major populations observed, and possess epitaxial contact planes of (100)(I)-(210)(II) and (010)(I)-(210)(II); respectively.

Double twist in helical polymer "soft" crystals

In natural and synthetic materials having non-racemic chiral centers, chirality and structural ordering each play a distinct role in the formation of ordered states. Configurational chirality can be extended to morphological chirality when the phase, structures possess low liquid crystalline order. In the crystalline states the crystallization process suppresses the chiral helical morphology due to strong ordering interactions, In this Letter, we report the first observation of helical single lamellar crystals of synthetic non-racemic chiral polymers. Experimental evidence shows that the molecular chains twist along both the long and short axes of the helical lamellar crystals, which is the first time a double-twist molecular orientation in a helical crystal has been observed.

Phase identification in a series of liquid crystalline TPP polyethers and copolyethers having highly ordered mesophase structures. 7. Phase structures in a series of copolyethers containing odd and even numbers of methylene units of different compositions

A series of liquid crystalline copolyethers have been synthesized from 1-(4-hydroxy-4'-biphenyl)-2-(4-hydroxyphenyl)propane with 1,7-dibromoheptane and 1,12-dibromododecene [coTPPs(7/12)], which represents copolyethers containing both odd and even numbers of methylene units. The molar ratio of odd to even methylene units in this series ranges from 1/9 to 9/1. The coTPPs(7/12) exhibit multiple phase transitions during cooling and heating in differential scanning calorimetry experiments. For all these thermal transitions, a small undercooling and superheating dependence is observed upon cooling and heating at different rates. Three types of phase behaviors can be classified in coTPPs(7/12) on the basis of the structural analyses by wide-angle X-ray diffraction on powder and fiber samples and by electron diffraction experiments in transmission electron microscopy. At room temperature, highly ordered smectic and smectic crystal (SC) phases are identified in coTPPs(7/12: 1/9 and 2/8), which is similar to the homopolymer TPP(m = 12). The coTPPs(7/12: 3/7, 4/6, and 5/5) possess a hexagonal columnar (Phi(H)) phase in which the molecular and columnar axes are parallel to the fiber direction and perpendicular to the hexagonal lateral packing. The coTPPs(7/12: 6/4, 7/3, and 8/2) possess a tilted hexagonal columnar (Phi(TH)) phase with a single tilt angle which increases with the increasing composition of the seven-numbered methylene units. However, in coTPP(7/12: 9/1), a Phi(TH) phase with multiple tilt angles is found. Upon heating, phase structures in most coTPPs(7/12) involving the columnar phases enter directly into the nematic (N) phase, while the coTPP(7/12: 1/9) exhibits a highly ordered smectic F (S-F) phase before it reaches the N phase. One exception is found in coTPP(7/12: 2/8), wherein the transformation from the S-F to Phi(H) occurs prior to the N phase. Combining the copolymer phase behaviors observed with the corresponding homopolymers TPP(n = 7) and TPP(m = 12), a phase diagram describing transition temperatures with respect to the composition can be constructed.

Fabrication and characterization of orientation-controlled thin films of distyryl benzene derivatives

Distyryl benzene derivatives (DSB-1 and DSB-2) were deposited on a KBr (001) surface. DSB-1 molecules took two kinds of orientations depending on the substrate temperature. On the other hand, DSB-2 grew epitaxially. The longitudinal axes of DSB-2 molecules were oriented parallel to the substrate surface.

Epitaxial crystallization in the sPP/nylon-12 semicrystalline polymer system

The epitaxial crystallization behaviour of syndiotactic polypropylene (sPP) on highly oriented nylon-12 substrates has been investigated by means of transmission electron microscopy. The results obtained from bright field electron microscopy and electron diffraction indicate that sPP crystals grow epitaxially on the oriented nylon-12 substrate with their c-axes +/- 37 degrees apart from the chain axis of the nylon-12 substrate. The contact planes of the sPP crystals are the (100) lattice planes. Moreover, the epitaxial crystallization of nylon-12 on highly oriented sPP substrates from a dilute solution in cyclohexanone has also been studied using optical microscopy. The results show that the nylon-12 crystals grow epitaxially on the oriented sPP substrate with the oriented nylon-12 lamellae forming large, anisotropic domains. Copyright (C) 1996 Elsevier Science Ltd.

EPITAXIAL CRYSTALLIZATION OF HDPE ON IPP IN HDPE/IPP BLENDS

Unique crystalline morphologies of solution-cast films of HDPE/iPP blends were investigated by means of transmission electron microscopy (TEM), electron diffraction, metal shadowing and specimen-tilt techniques. The unique morphologies come from an epitaxial crystallization of HDPE on iPP. The contact planes of the two kinds of crystals are (100) of HDPE and (010) of iPP, while the intercrossing angle between their chain axes is about 50-degrees. The HDPE existed with different crystalline morphologies in the two kinds of crystalline regions of iPP spherulites, i.e. cross-hatched and single-crystal-type structures. Based on structural analysis, two models of epitaxial growth of HDPE on iPP are proposed.

Tectonic geomorphology of the Ryukyu Trench-Arc-Backarc System: geological-geophysical exploration and mapping

OKINAWA TROUGH; BASIN

Variations in morphology and PSII photosynthetic capabilities during the early development of tetraspores of Gracilaria vermiculophylla (Ohmi) Papenfuss (Gracilariales, Rhodophyta)

Background: Red algae are primitive photosynthetic eukaryotes, whose spores are ideal subjects for studies of photosynthesis and development. Although the development of red alga spores has received considerable research attention, few studies have focused on the detailed morphological and photosynthetic changes that occur during the early development of tetraspores of Gracilaria vermiculophylla (Ohmi) Papenfuss (Gracilariales, Rhodophyta). Herein, we documented these changes in this species of red algae. Results: In the tetraspores, we observed two types of division, cruciate and zonate, and both could develop into multicellular bodies (disks). During the first 84 hours, tetraspores divided several times, but the diameter of the disks changed very little; thereafter, the diameter increased significantly. Scanning electron microscopy observations and analysis of histological sections revealed that the natural shape of the disk remains tapered over time, and the erect frond grows from the central protrusion of the disk. Cultivation of tissue from excised disks demonstrated that the central protrusion of the disk is essential for initiation of the erect frond. Photosynthetic (i.e., PSII) activities were measured using chlorophyll fluorescence analysis. The results indicated that freshly released tetraspores retained limited PSII photosynthetic capabilities; when the tetraspores attached to a substrate, those capabilities increased significantly. In the disk, the PSII activity of both marginal and central cells was similar, although some degree of morphological polarity was present; the PSII photosynthetic capabilities in young germling exhibited an apico-basal gradient. Conclusions: Attachment of tetraspores to a substrate significantly enhanced their PSII photosynthetic capabilities, and triggered further development. The central protrusion of the disk is the growth point, may have transfer of nutritive material with the marginal cells. Within the young germling, the hetero-distribution of PSII photosynthetic capabilities might be due to the differences in cell functions.

趋磁细菌AMB-1培养条件优化及磁小体变化过程研究

趋磁细菌(Magnetotactic bacteria)的研究是国际微生物学研究热点之一。趋磁细菌体内含有纳米单磁畴的氧化铁/硫化铁(Fe3O4或Fe3S4)晶体，称为磁小体。由于趋磁细菌营养条件要求苛刻，在环境中需要微好氧条件，且营养类型属于化能自养，使得培养趋磁细菌时常遇到问题。 本研究首先通过正交试验优化趋磁细菌AMB-1菌株培养条件，在培养条件铁源为奎尼酸铁0.02 mmol/L，装瓶量75% ，pH值6.7，温度25 ℃时，AMB-1 OD600达到0.440(1.166×109 cells/ml)。同时运用磁收集传代法，使带有磁小体的AMB-1细胞比例占95％以上(Cmag值稳定在1.9-2.0)。 在AMB-1具有较好的生物量，同时又具有较好的含磁小体细胞比例后，研究磁小体的变化过程。通过透射电镜观察磁小体变化过程，发现培养24 h细菌体内已有较小晶体形成(平均27 nm，n=188)且沿长轴分布；48 h晶体长大(平均43 nm，n=203)且形成分段链沿长轴排列；72 h晶体进一步成熟(平均50 nm，n=191)仍以分段链沿长轴排列；随后细菌逐渐衰亡磁小体变小，168 h可见部分自溶细菌中仍有磁小体链(平均37 nm，n=186)；192 h细菌自溶磁小体链(平均33 nm，n=184)分散到环境中。 通过透射电镜在细胞水平上研究趋磁细菌细胞分裂时发现，磁小体在细菌分裂时采用两种分离方式：一种为磁小体分配到两个子细胞；另一种为磁小体只分配到一个子细胞。无磁小体的子细胞，在随后的生长过程又分为两种情况：一种为细胞逐渐产生磁小体，另一种为不再产生磁小体。这种现象的发现，解释了随着传代次数的增多，细菌磁性有所下降的原因(Cmag值降低)。 在对趋磁细菌磁小体合成机制的研究中，常使用基因敲除的办法获得缺陷型，并与野生型对比进行研究。但是，利用基因敲除获得缺陷型不仅操作繁琐并且所得缺陷型不稳定。本研究利用特殊的磁富集传代法，先将带有磁小体的菌体收集并连续传代，筛选获得了高磁菌株；利用这种方法，收集不含磁小体的菌体并连续传代，筛选获得了无磁菌株。 趋磁细菌磁小体在医疗、环保等领域具有广阔应用价值，但是目前由于趋磁细菌难以大规模培养，并且磁小体纯化存在成本高等原因，将磁小体真正实际应用尚有一段距离。通过研究磁小体在趋磁细菌中的变化过程发现，AMB-1菌株在培养192 h后自溶，并且磁小体随着细胞的破碎释放到环境中去。

Laurencia nanhaiense sp nov., a new species of the genus Laurencia(Rhodomelaceae, Rhodophyta) from China

Laurencia nanhaiense sp. nov. (Rhodomelaceae, Rhodophyta) is described from Hainan and Guangdong Provinces, China. The new species clearly displays one of the defining features of the genus, viz. four periaxial cells per vegetative axial segment. It differs from other closely related species in having a combination of features such as terete axes from a basal system composed of a primary, discoid holdfast and a secondary attachment to give rise to many short rhizoids, branching oppositely and alternately, irregularly tristichous or subverticillately polystichous, having more curve branches with very sparse, adventitious ultimate branchlets, non-projecting superficial cortical cells at the apices of ultimate branchlets, presence of longitudinally oriented secondary pit-connections between contiguous superficial cortical cells, absence of lenticular thickenings in the walls of medullary cells, parallel arrangement of tetrasporangia along the axis of stichidia, and presence of intercellular spaces between medullary cells.

含环路布局和运动副轴线方位特征的运动链拓扑结构描述

构造一种含环路布局、构件类型、运动副类型和运动副轴线方位信息的运动链的拓扑特征矩阵。构件的类型构成特定的环路布局,运动副的类型及其轴线的方位配置决定运动的状态特征,多副构件是联系环路间的桥梁。以运动链构成的独立环路为基础构建特征矩阵的行数,运动链的构件数目构建特征矩阵的列数;以独立环路的旋向确定构件及其排序;以代表运动副类型的符号或数字表达构件及环路间的连接关系;以同一构件上两个运动副的相对轴线方位描述运动副的方位特征。构造的运动链特征矩阵为(2l+2)×n,而单环运动链为3×n矩阵。实例表明,该特征矩阵可以描述各类运动链,与传统n×n拓扑矩阵相比,结构大大简化,而且拓扑信息量多。该矩阵特别便于由特征矩阵构造对应的机构简图,同时也为计算机辅助运动学和动力学建模提供了一种便捷途径。

原子力显微镜管式扫描器运动学建模与误差分析

针对样本扫描模式原子力显微镜,对其管式扫描器-样本-探针系统进行了运动学分析,建立了该系统的运动学模型,该模型表明:对于给定原子力显微镜扫描器,样本上与探针接触点的横向和纵向位移取决于探针尖端相对于扫描管轴心的偏置量、所加电压(或名义扫描范围)及样本厚度。据此模型,对由于弯曲运动模式所产生的两种重要误差—交叉耦合误差及扫描范围误差进行了定量分析,分析表明:扫描范围误差主要受样本厚度及名义扫描范围影响,而Z向交叉耦合误差主要受探针偏置量及名义扫描范围影响,实验验证了所建立的运动学模型和误差计算公式的正确性;另外,还提出了相应的减小误差的方法。

运动解耦机理分析与解耦关节设计

分析了运动解耦机理,提出了只有结构解耦才能方便地做到运动解耦,给出了结构解耦的条件:所有回转轴线交于一点,前面的转动使得有关回转轴线的位姿发生变化,后面的转动按照已经发生变化的回转轴线转动,即保证杆的长度不发生变化和杆的回转中心不发生平移。在此基础上,设计了一种三自由度运动解耦液压伺服关节。

一种新型四自由度并联机器人

提出一种用铅垂导轨上 4个滑块作为原动件的新型四自由度并联机器人 .该并联机器人的动平台能够实现两个方向的移动以及绕两个方向轴线的转动 .研究了该并联机器人的运动学建模方法 ,给出了运动学正、逆解 ,用 Grassmann几何法分析了该并联机器人在其工作空间内不会出现奇异形位 .基于该四自由度并联机器人可以非常方便地开发具有大工作空间的五轴联动数控机床

一种四自由度并联机构及其运动学建模

提出一种新型四自由度并联平台机构 ,该机构的动平台能够实现两个方向的移动 ,以及绕两个方向轴线的转动。研究了该机构的运动学建模方法 ,给出了运动学正、逆解。阐述其应用前景