Strongly nonlinear long interfacial waves in uniform basic flows and their dispersion relationship

In this paper, long interfacial waves of finite amplitude in uniform basic flows are considered with the assumption that the aspect ratio between wavelength and water depth is small. A new model is derived using the velocities at arbitrary distances from the still water level as the velocity variables instead of the commonly used depth-averaged velocities. This significantly improves the dispersion properties and makes them applicable to a wider range of water depths. Since its derivation requires no assumption on wave amplitude, the model thus can be used to describe waves with arbitrary amplitude.

Analysis of high wheat yields in Northwest China

Grain yields of over 14 Mg ha(-1) were reported in 1978 for spring wheat (Triticum aestivum L.) grown in Northwest China. Understanding the circumstances under which this record yield was achieved may be useful in defining the key factors that lead to high grain yields and in determining the limits to wheat yield. A relatively simple, mechanistic model was used in an effort to simulate the record yield. The model was used as a framework in which various crop traits could be adjusted to match the observed crop growth. The weather that was characterized by cool temperatures and high levels of solar radiation, proved to be especially important in allowing a full-season crop to achieve record yields. Variables defining plant development in the model also had to be set to describe the high yielding cultivar grown in China. Leaf development was defined by the length of a phyllochron, which was set equal to 78 TU (thermal units, base temperature equal to 0 degrees C) based on independent data. The description of grain fill had to be defined to match simulation results with the observations. Two variables, length of the grain-fill period and the grain growth rate, were set in response to the unique traits of this cultivar and the low temperatures during grain development. These simulations led to important suggestions for examining the interaction between cool temperature regimes and developmental traits of wheat cultivars. (C) 1997 Published by Elsevier Science Ltd.

Structure and impedance of ZrO2 doped with SC2O3 and CeO2

Scandia and ceria doped zirconia samples, with 10 mol% SC2O3 and different content of CeO2, were synthesized and characterized. The XRD results depict that the sintered samples have a cubic phase structure. However, Raman spectra show that besides the main cubic phase, a secondary phase is also present in the sintered samples. The addition of CeO2 can raise the content of the cubic phase, but the minor metastable tetragonal phase (t'-phase) exists even at the CeO2 content as high as 10 mol%. The near-UV Raman spectra indicate that the deformed tetragonal structure predominates at the grain boundary. The addition of CeO2 can reduce the impurity at grain boundary, and no impurity can be found by near-UV Raman spectroscopy at the grain boundary of the samples with high CeO2 content. The impedance measurements show that with the increase of CeO2 content, the impedance of grain boundary decreases and the bulk impedance increases. The low impedance of grain boundary can be attributed to the formation of a clean grain boundary upon CeO2 doping, and the increase of the bulk impedance is due to the blocking effect of the large Ce(IV) ions. (c) 2005 Elsevier B.V All rights reserved.

颗粒级配和结构对粉砂力学性质的影响

分析了几组原状、重塑和配制土样的静三轴试验结果,认为颗粒级配和结构性是影响粉砂应力-应变关系和强度特性的两个主要因素.当颗粒级配不同时,结构性原状粉砂土样和不具有结构性的配制土的强度均不同.相同颗粒级配的原状和重塑粉砂的强度也不同.而颗粒级配稍有不同的一种配制粉砂与原状粉砂在应力-应变关系和强度特性方面相接近.此种配制粉砂可替代原状粉砂做为模型试验用土.

不同沉积参量下ZrO_2薄膜的微结构和激光损伤阈值

ZrO2采用X射线衍射(XRD)技术分析了不同充氧条件和沉积温度对ZrO2溥膜组成结构的影响，并对不同工艺下制备的薄膜的表面粗糙度和激光损伤阈值进行了测量。结果发现随着氧压的升高，ZrO2溥膜将由单斜相多晶态逐渐转变为非晶态结构，而随着基片温度的增加，溥膜将由非晶态逐渐转变为单斜相多晶态。同时发现随着氧压升高晶粒尺寸减小，而随着沉积温度增加，晶粒尺寸增大。氧压增加时工艺对表面粗糙度有一定程度的改善，而沉积温度升高，工艺对表面粗糙度的改善不明显。晶粒尺寸大小变化与表面粗糙度变化存在对应关系。激光损伤测量表明

第二相粒子对ECAP挤压的2A12铝合金晶粒细化的影响

采用等径角挤压技术对2A12铝合金在室温下进行挤压,成功制备了亚微米尺度的块体铝合金材料.挤压前材料的平均晶粒尺寸约5μm,两次挤压后,平均晶粒尺寸细化至200nm左右.合金中的Al2Cu相在挤压过程中由针状变成了块状颗粒,而Al2CuMg相在挤压过程中晶粒大小基本不变.研究发现,硬颗粒Al.2CuMg对基体α-Al有剪切和割裂作用,可以促进基体的晶粒细化过程,并初步给出了晶粒细化的模型.

Rashba electron transport in one-dimensional quantum waveguides

The properties of Rashba wave function in the planar one-dimensional waveguide are studied, and the following results are obtained. Due to the Rashba effect, the plane waves of electron with the energy E divide into two kinds of waves with the wave vectors k(1)=k(0)+k(delta) and k(2)=k(0)-k(delta), where k(delta) is proportional to the Rashba coefficient, and their spin orientations are +pi/2 (spin up) and -pi/2 (spin down) with respect to the circuit, respectively. If there is gate or ferromagnetic contact in the circuit, the Rashba wave function becomes standing wave form exp(+/- ik(delta)l)sin[k(0)(l-L)], where L is the position coordinate of the gate or contact. Unlike the electron without considering the spin, the phase of the Rashba plane or standing wave function depends on the direction angle theta of the circuit. The travel velocity of the Rashba waves with the wave vector k(1) or k(2) are the same hk(0)/m*. The boundary conditions of the Rashba wave functions at the intersection of circuits are given from the continuity of wave functions and the conservation of current density. Using the boundary conditions of Rashba wave functions we study the transmission and reflection probabilities of Rashba electron moving in several structures, and find the interference effects of the two Rashba waves with different wave vectors caused by ferromagnetic contact or the gate. Lastly we derive the general theory of multiple branches structure. The theory can be used to design various spin polarized devices.

Resonant Enhanced Wave Filter and Waveguide via Surface Plasmons

The authors present an analysis of plasmonic wave filter and curved waveguide, simulated using a 2-D finite-difference time-domain technique. With different dielectric materials or surface structures located on the interface of the metal/dielectric, the resonant enhanced wave filter can divide light waves of different wavelengths and guide them with low losses. And the straight or curved waveguide can confine and guide light waves in a subwavelength scale. Within the 20 mu m simulation region, it is found that the intensity of the guided light at the interface is roughly four times the peak intensity of the incident light.

Plasmonic surface-wave splitter

The authors present an analysis of a plasmonic surface-wave splitter, simulated using a two-dimensional finite-difference time-domain technique. A single subwavelength slit is employed as a high-intensity nanoscale excitation source for plasmonic surface waves, resulting in a miniaturized light-surface plasmon coupler. With different surface structures located on the two sides of the slit, the device is able to confine and guide light waves of different wavelengths in opposite directions. Within the 15 mu m simulation region, it is found that the intensity of the guided light at the interface is roughly two to eight times the peak intensity of the incident light, and the propagation length can reach approximately 42 and 16 mu m and at the wavelengths of 0.63 and 1.33 mu m, respectively. (c) 2007 American Institute of Physics.

Polarity determination for GaN thin films by electron energy-loss spectroscopy

The intensity of the N K edge in electron energy-loss spectra from a GaN thin film shows a pronounced difference when the orientation of the film approaches the (0002) and (000-2) Bragg reflections, along the polar direction. This experimental result can be interpreted by the effect associated with interference between the Bloch waves of the incident electron in the GaN crystal. The theoretical calculations indicate that, at the Bragg condition of g=0002 along the Ga-N bond direction, the thickness-averaged electron current density on the N atom plane is much higher than that at g=000 (2) over bar, with a maximum as the specimen thickness is about 0.4xi(0002) (the two-beam extinction distance). The delocalization effect on the experimental spectra is also discussed. (C) 2002 American Institute of Physics.

陕西省米脂县耕地动态变化与粮食安全研究

根据米脂县1990—2007年粮食生产的相关数据,对该县耕地、人口和粮食生产动态变化以及粮食总产与其影响因素进行了灰色关联度分析。结果表明,退耕还林还草工程是耕地总面积迅速减少的主要原因;提高粮食单产保障粮食总产是实现粮食安全的最关键因子;持续增长的人口造成耕地的承载压力越来越大,并对该区实现粮食安全提出了更大的挑战。最后,根据分析结果提出了增加科技投入,提高单产,保护耕地,挖掘耕地潜力等措施以保障该区域的粮食安全,为政府部门制定相关粮食安全政策提供科学的理论依据。

干旱对不同抗旱性冬小麦旗叶光合及主茎干物质转运的影响

以冬小麦品种长武134(抗旱性强)和陕253(抗旱性弱)为材料,研究干旱对旗叶净光合速率和叶绿素含量、主茎及其组成节间花前积累干物质的转运及其对穗粒重贡献的影响。结果表明,干旱条件下长武134主茎穗粒重降幅小于陕253;干旱缩短了小麦花后旗叶光合速率高值持续期(PAD)和叶绿素含量缓降期(RSP),长武134受影响程度较小。长武134除穗下节外,其余各节间及茎杆干物质转运量及对籽粒贡献率降幅均大于陕253;干旱提高了陕253穗下节和倒二节干物质转运率,降低了倒三节和下部节干物质转运率,茎杆干物质转运率无明显变化;长武134除穗下节外其余各节间及茎杆干物质转运率均明显低于对照,而且距离穗部越远的节位降低幅度越大。上述结果表明,干旱条件下不同节位干物质转运能力变化与距离穗远近有关,花前茎杆干物质转运并不能补偿籽粒产量的损失,花后旗叶光合功能期延长是小麦抗旱高产的主要原因。

吴起县不同退耕阶段农地资源生态服务价值评估分析

以陕西省吴起县为例,对三个不同退耕阶段农地资源生态服务价值进行了评估,分析了各阶段农地资源生态服务价值的变化,探讨了退耕还林(草)工程的实施对农地资源生态服务价值的影响.结果表明:退耕前、退耕初期及退耕中期吴起县农地资源的直接经济产出价值和间接生态服务价值之比分别为:1∶0.84、1∶2.63和1∶3.56.随着退耕工程的不断深入,农地资源总生态服务价值由退耕前的45 402.81万元增加到了退耕初期的81 603.81万元和退耕中期的164 925.46万元,实现了经济效益与生态效益的同步发展.

黄土高原沟壑区小麦品种演替过程中籽粒灌浆特性研究

为了解黄土高原沟壑区小麦品种演替过程中的籽粒灌浆特性,以此地区20世纪50年代至今的主栽小麦品种为供试材料,研究了不同小麦品种演替过程中籽粒干物质积累量及灌浆速率的变化。结果表明,黄土高原沟壑区小麦演替过程中,小麦籽粒千粒重呈现逐渐增加的趋势。平均灌浆速率逐渐增加,小麦籽粒的干物质积累随之增加,长旱58的W0最大,达50.53 g。灌浆三阶段中,各阶段的灌浆速率表现为,V2>V1>V3。从灌浆持续时间看,T1和T2持续的时间较长且变异系数较大,而T3和T相对稳定。从灌浆速率来看,V1、V2、V3、Vm、Va变异系数较大,灌浆速率易受环境因素影响而波动。

陕西省汉台区粮食供需平衡及其对策研究

笔者对汉台区粮食生产的现状、粮食消费与需求进行分析,研究结果表明:汉台区人均粮食为229kg,远低于全国人均粮食380kg拥有量的水平。粮作比、粮食总产量和人均粮食产量总体上呈现下降的趋势;汉台区近30年粮食缺口较大,粮食自给率低,粮食供给难以满足当地粮食需求;按90%自给率计算,要实现2010年小康的总产目标,必须保证34575hm2种植面积。