基于时间Petri网的制造过程模型研究

分析了时间Petri网的激发规则、托肯可用时间和抑制弧等特性,以及制造过程中随机故障的特征。提出不同的时间关联方式对应的多种建模方法,考虑不同的故障发现模式、不同的作业处理策略,建立相应的单机制造过程模型。在此基础上采用模块化和层次化方法可以构建复杂制造过程的时间着色Petri网模型,并可以转换成仿真模型,进一步分析随机机器故障对制造过程性能的影响。

黄骅坳陷大港探区油气资源潜力与资源结构预测

Facing the problems that Dagang region of Huanghua Depression has high exploration degree and its remaining resource potential and structure are not clear, the theory of Petroleum Accumulation System (PAS) is applied to divide and evaluate the oil/gas systems quantitatively. Then, the petroleum accumulation systems are taken as units to forecast and analyse the oil/gas resources and their structure using statistical methods of sampling analysis of discovery process model and generalized pareto distribution model. The exploration benefit of the unit is estimated using exploration simulation methods. On the basis of the above study, the resource potential of Huanghua Depression is discussed.Huanghua Depression can be diveded into four petroleum accumulation systems, i.e. North PAS5 Middle Qibei PAS, Middle Qinan PAS and South PAS. Each PAS can be diveded futher into several sub- PASs. Using the basic princple of Analytical Hierarchy Process, the method of quantitative evaluation of PAS is established. Then the elements and maturity of PAS are evaluated quantitatively.Taking migration and accumulation units and sub-PASs as prediction units, sampling analysis of discovery process model and generalized pareto distribution model are applied comparatively to forecast the resource structure of eight migration and accumulation units in six PASs of medium-high exploration degree. The results of these two methods are contrasted and analyzed. An examination of X2 data of these two models from exploration samples shows that generalized pareto distribution model is more effective than sampling analysis of discovery process model in Huanghua Depression. It is concluded that minimum and maximum size of reservoir and discovery sequence of reservoirs are the sensitive parameters of these two methods.Aiming at the difficult problem of forecast in low exploration degree, by analysis of relativity between resource parameters and their possible influential geological factors, forecast models for resource parameters were established by liner regressing. Then the resource structure is forecasted in PASs of low exploration degree.Based on the forecast results, beginning with the analysis of exploration history and benefit variation, the exploration benefit variation of the above PASs is fitted effectively using exploration simulation method. The single well exploration benefit of remaining oil resource is also forecasted reasonably.The results of resource forecast show that the total oil resources ofHuanghua Depression amount to 2.28 b illion ton. By the end o f 2 003, the accumulative total proved oil reserve is 0.90 billion ton and the remaining oil resources is 1.38 billion ton. The remaining oil resource is concentrated in Kongdian-Dengmingshi, Banqiao-Beidagang, Qidong-Yangerzhuang and Baidong-Qizhong sub-PASs.

工作幸福感的结构、测量及作用机制

With the emergence and development of positive psychology, happiness has been the focus of academia and business. However, there is no uniform measure of happiness, because of many different theories of happiness, which are not compatible with others. It bounds the further development of happiness theory. It is also the same with the research of work well-being, which refers to the emotional experience and quality of psychological functioning of employee in the workplace. Subjective well-being (SWB) and psychological well-being (PWB) are two major theories of happiness. Prior research has demonstrated the integration of these two theories theoretically, but still needs more empirical support. Besides, in line with the development of positive psychology, a body of knowledge about positive leadership is advocated. Transformational leadership is treated as one kind of positive leadership, since it emphasizes the leader’s motivational and elevating effect on followers. But the extent to which the transformational leadership can enhance work well-being, and what the mechanism is, these are the questions need to be explored. Based on the integration of SWB and PWB, this research tried to investigate the structure, measurement and mechanism of work well-being, and combining with the theory of transformational leadership, this study also tried to investigate the relationship between transformational leadership and work well-being. The structure and measurement of work well-being, the relationships between work well-being and job characteristics (including job resources and job demands), the relationships among transformational leadership, job resources, work well-being and corresponding outcomes, the relationships among transformational leadership, job demands, work well-being and corresponding outcomes, and the relationships among transformational leadership, group job characteristics, group work well-being and corresponding group outcomes were explored by using content analysis, Subject Matter Experts (SMEs) discussion, and structural questionnaire surveys. More than 7000 subjects were surveyed, and Explore Factor Analysis (EFA), Confirm Factor Analysis (CFA), Structural Equation Modeling (SEM), Hierarchical Linear Modeling (HLM) and other statistics methods were used. The following is the major conclusions. Firstly, work well-being is a two high-order factors structure, which includes affective well-being (AWB) and cognitive well-being (CWB). AWB is similar to SWB, and CWB is similar to PWB. Besides, the construct of AWB includes sub-dimensions of positive emotional experience and negative emotional experience. And the construct of CWB consists of work autonomy, personal growth, work competent, and work significance. Secondly, the relationships between job characteristics and AWB and CWB are different. On one hand job demands are directly related to AWB, and are indirectly related to CWB through the full mediation of AWB, on the other job resources are directly related to CWB, and are indirectly related to AWB through the full mediation of CWB, which means AWB and CWB reciprocally influences each other in the model of job demands-resources. These results were concluded as the process model of work well-being. Thirdly, AWB and CWB are positively related to many workplace outcomes, including job satisfaction, group satisfaction, organizational commitment, turnover intention, job performance, organizational citizenship behavior (OCB), and general psychological health and general physiological health. Fourthly, transformational leadership is indirectly related to CWB through the full mediation of job resources, and is related to AWB through the partial mediation of job demands. Meanwhile, transformational leadership is related to many workplace outcomes through the mediation of job characteristics and work well-being. These results implied that transformational leadership is indeed one kind of positive leadership. Fifthly, in the group level, transformational leadership is indirectly related to group CWB through the full mediation of group job resources, and is related to group AWB through the full mediation of group job demands. Group AWB has positive influence on group CWB, but not vice versa. Group job characteristics and group work well-being fully mediate the relationships between transformational leadership and intragroup cooperation and group performance.

手持通信设备的多通道文本输入研究

Recently，Handheld Communication Devices is developing very fast, extending in users and spreading in application fields, and has an promising future. This study investigated the acceptance of the multimodal text entry method and the behavioral characteristics when using it. Based on the general information process model of a bimodal system and the human factor studies about the multimodal map system, the present study mainly focused on the hand-speech bimodal text entry method. For acceptance, the study investigated the subjective perception of the accuracy of speech recognition by Wizard of Oz (WOz) experiment and a questionnaire. Results showed that there was a linear relationship between the speech recognition accuracy and the subjective accuracy. Furthermore, as the familiarity increasing, the difference between the acceptable accuracy and the subjective accuracy gradually decreased. In addition, the similarity of meaning between the outcome of speech recognition and the correct sentences was an important referential criterion. The second study investigated three aspects of the bimodal text entry method, including input, error recovery and modal shifts. The first experiment aimed to find the behavioral characteristics of user when doing error recovery task. Results indicated that participants preferred to correct the error by handwriting, which had no relationship with the input modality. The second experiment aimed to discover the behavioral characteristics of users when doing text entry in various types of text. Results showed that users preferred to speech input in both words and sentences conditions, which was highly consistent among individuals, while no significant difference was found between handwriting and speech input in the character condition. Participants used more direct strategy than jumping strategy to deal with mixed text, especially for the Chinese-English mixed type. The third experiment examined the cognitive load in the different modal shifts, results suggesting that there were significant differences between different shifts. Moreover, relevant little time was needed in the Shift from speech input to hand input. Based on the main findings, implications were discussed as follows: Firstly, when evaluating a speech recognition system, attention should be paid to the fact that the speech recognition accuracy was not equal to the subjective accuracy. Secondly, in order to make a speech input system more acceptable, a good method is to train and supply the feedback for the accuracy in training, which improving the familiarity and sensitivity to the system. Thirdly, both the universal and individual behavioral patterns were taken into consideration to improve the error recovery method. Fourthly, easing the study and the use of speech input, the operations of speech input should be simpler. Fifthly, more convenient text input method for non-Chinese text entry should be provided. Finally, the shifting time between hand input and speech input provides an important parameter for the design of automatic-evoked speech recognition system.

Correlative reference model and molecular dynamics simulation of dislocation emission process

A correlative reference model for computer molecular dynamics simulations is proposed. Based on this model, a flexible displacement boundary scheme is introduced and the dislocations emitted from a crack tip can continuously pass through the border of the inner discrete atomic region and pile up at the outer continuum region. The effect of the emitted dislocations within the plastic zone on the inner atomistic region can be clearly demonstrated. The simulations for a molybdinum crystal show that a full dislocation in a bcc crystal is dissociated into three partial dislocations and interaction between the crack and the emitted dislocations results in gradual decrease of the local stress intensity factor.

Failure process analysis of cement under explosive loading with a generalized driven nonlinear threshold model

The microstructural heterogeneity and stress fluctuation play important roles in the failure process of brittle materials. In this paper, a generalized driven nonlinear threshold model with stress fluctuation is presented to study the effects of microstructural heterogeneity on continuum damage evolution. As an illustration, the failure process of cement material under explosive loading is analyzed using the model. The result agrees well with the experimental one, which proves the efficiency of the model.

Behavior model of a CMOS process compatible photo-diode

A behavior model of a photo-diode is presented. The model describes the relationship between photocurrent and incident optical power, and it also illustrates the impact of the reverse bias to the variation of the junction capacitance. With this model, the photo-diode and a CMOS receiver circuit were simulated and designed simultaneously under a universal circuit simulation environment.

a flexible negotiation model for an agent-based software process modelling

Our Agent-based Software Process Modelling (ASPM) approach describes a software process as a set of cooperative agents. Negotiation is the way in which the agents construct their cooperative relations, and thus the software process. Currently, most negotiation models use a fixed negotiation protocol and fixed strategies. In order to achieve the flexibility that the negotiation of the agents in ASPM requires, we propose a negotiation model NM-PA. NM-PA mainly includes a generic negotiation protocol and some rules, which possibly change in different negotiation processes. By changing the rules, the model can support multi-protocols and multi-decision-making strategies at a lower cost.

the trustworthiness metric model of software process quality based-on life circle

Communication University of China; Wuhan University; James Madison University; Institute of Policy and Management, Chinese Academy of Sciences; IEEE Wuhan Section

Strangeness production process pp -> nK(+)Sigma(+) within resonance model

We explore production mechanism and final state interaction in the pp -> nK(+)Sigma(+) channel based on the inconsistent experimental data published respectively by COSY-11 and COSY-ANKE. The scattering parameter a > 0 for n Sigma(+) interaction is favoured by large near-threshold cross section within a nonrelativistic parametrization investigation, and a strong n Sigma(+) interaction comparable to pp interaction is also indicated. Based on this analysis we calculate the contribution from resonance Delta*(1920) through pi(+) exchange within resonance model, and the numerical result suggests a rather small near-threshold total cross section, which is consistent with the COSY-ANKE data. With an additional sub-threshold resonance Delta*(1620), the model gives a much better description to the rather large near-threshold total cross section published by COSY-11

多分量对偶超导理论和口袋模型；Multi-component Dual Superconductor Theory and Bag Model

基于联络新参数化方案研究了多分量对偶超导模型。给出了多分量Ginzburg-Landau模型中的自对偶解,并研究了磁通量子数趋于无穷大时的墙涡旋解,以及与口袋模型之间的联系。

the study of trustworthy software process improvement model

Huazhong Univ Sci & Technol, Natl Tech Univ Ukraine, Huazhong Normal Univ, Harbin Inst Technol, IEEE Ukraine Sect, I& M/CI Joint Chapter

Supervised Gaussian Process Latent Variable Model for Dimensionality Reduction

The Gaussian process latent variable model (GP-LVM) has been identified to be an effective probabilistic approach for dimensionality reduction because it can obtain a low-dimensional manifold of a data set in an unsupervised fashion. Consequently, the GP-LVM is insufficient for supervised learning tasks (e. g., classification and regression) because it ignores the class label information for dimensionality reduction. In this paper, a supervised GP-LVM is developed for supervised learning tasks, and the maximum a posteriori algorithm is introduced to estimate positions of all samples in the latent variable space. We present experimental evidences suggesting that the supervised GP-LVM is able to use the class label information effectively, and thus, it outperforms the GP-LVM and the discriminative extension of the GP-LVM consistently. The comparison with some supervised classification methods, such as Gaussian process classification and support vector machines, is also given to illustrate the advantage of the proposed method.