身管内膛复合镀铬层的组织退化特征

研究了某型号身管后膛射击后复合镀铬层(由顶层的高收缩性铬和底层的低收缩性铬组成)的组织及显微硬度退化特征.结果显示:经3000发射击后,复合镀铬层沿着涂层厚度方向呈现梯度性再结晶,其组织由射击前的柱状晶粒团簇逐渐转变成等轴晶粒团簇,这导致镀铬层的硬度梯度分布;高收缩性铬层的表层晶粒成长最大,其相应的硬度由初始的960HV左右急剧下降到330HV左右.另外,高收缩性铬层许多短小的镶嵌微裂纹消失,而且一些穿透镀铬层的主裂纹形成并扩展到基体.根据服役条件下镀铬层的组织及性能退化特征,调整优化镀铬层的组织或许能有效地延长身管内膛镀铬层的寿命.

Simulated pathogenic conformational switch regions matched well with the biochemical findings

Pathogenic conformational conversion is a general causation of many disease, such as transmissible spon- giform encephalopathy (TSE) caused by misfolding of prion, sickle cell anemia, and etc. In such structural changes, misfolding occurs in regions important for the stability of native structure firstly. This destabi- lizes the normal conformation and leads to subsequent errors in folding pathway. Sites involved in the first stage can be deemed switch regions of the protein, and are vital for conformational conversion. Namely it could be a switch of disease at residue level. Here we report an algorithm that can identify such sites computationally with an accuracy of 93%, by calculating the probability of the native structure of a short segment jumping to a mistake one. Knowledge of such switch sites could be used to target clinical therapy, study physiological and pathologic mechanism of protein, and etc.

EVALUATION OF FILM-SUBSTRATE ADHESION VIA IMPACT USING COATED BULLETS

A method was devised to evaluate the adhesion between a film and a substrate. A front-end coated bullet is accelerated by a gas gun and hits the substrate of the specimen under test. The impact generates a compressive stress pulse that propagates toward the film. After transmission through the interface, part of the pulse is reflected on the free surface of the film, and tensile stress arises at the film-substrate interface, possibly inducing debonding of the film. This dynamic process was demonstrated analytically and simulated numerically by the finite element method. The results validate the initial concept and lay the foundation for further optimization of this method.

Further acceleration of MeV electrons by a relativistic laser pulse

With the development of photocathode rf electron gun, electrons with high-brightness and mono-energy can be obtained easily. By numerically solving the relativistic equations of motion of an electron generated from this facility in laser fields modelled by a circular polarized Gaussian laser pulse, we find the electron can obtain high energy gain from the laser pulse. The corresponding acceleration distance for this electron driven by the ascending part of the laser pulse is much longer than the Rayleigh length, and the light amplitude experienced on the electron is very weak when the laser pulse overtakes the electron. The electron is accelerated effectively and the deceleration can be neglected. For intensities around 10(19) W(.)mu m(2)/cm(2), an electron's energy gain near 0.1 GeV can be realized when its initial energy is 4.5 MeV, and the final velocity of the energetic electron is parallel with the propagation axis. The energy gain can be up to 1 GeV if the intensity is about 10(21) W(.)mu m(2)/cm(2). The final energy gain of the electron as a function of its initial conditions and the parameters of the laser beam has also been discussed.

光谱稳定性对直接探测多普勒测风激光雷达的影响研究

The wind error of the double-edge technique Doppler lidar due to the instability of injection-seeding solid laser and the drift of interferometer s spectrum was analyzed. Corresponding numerical simulation indicated that if the wind error of 1 m/s was achieved, the unsuccessful injection-seeding pulses should be less than 0.06% in integration time of 5 min. (30000 pulses). In the respect of spectrum drift of the interferometer, double temperature control systems were used and the accuracy of minus or plus 0.002°C was obtained, corresponding to the wind error of minus or plus 0.226 m/s. Monitoring of buildup time of the injection-seeding laser and temperature of the interferometer was significantly to improve the invertion accuracy of wind error by rejecting the data with frequency jumping and drifting. Researches of injection-seeding and spectrum stability of the interferometer were practical for the development of double-edge wind lidar.}

脉宽压缩光栅用的多层膜设计和性能分析

应用于啁啾脉冲放大技术中的脉宽压缩光栅是基于多层膜作为基底，利用全息干涉技术和离子束技术刻蚀而成。脉宽压缩光栅的衍射效率和抗激光损伤阈值一方面依赖于光栅结构的设计，另一方面很大程度上取决于作为基底的多层膜的设计。给出了以413．1nm作为写入波长，1053nm作为使用波长的多层介质光栅膜的设计．样品在ZZS-800F、型真空镀膜机上采用电子束蒸发方式沉积而成，并给出了膜系结构对光学性能影响因素的详细分析，结果表明膜系H3L(H2L)^9H0．5L2．03H满足光栅膜的指标。给出了样品光学特性测试，其使用波

Graded index 532HR/1064HT filter by glancing angle deposition

Glancing angle deposition is a novel method to prepare graded index coatings. By using this method and physical vapour deposition, ZrO2 is used to engineer graded index filter on BK7 glass substrate. Controlling the deposition rate and the periodic oscillation of oblique angle of deposited material, a 10-period graded index ZrO2 filter with high reflection near 532 nm and high transmittance at wavelength 1064 nm is fabricated. The causes of difference between the theoretical and experimental results are discussed in detail. The material properties and electron gun nonlinearity are possibly the main origins of the difference, which result in the variations in both thickness control and deposition rate of the Elm material.

电子束蒸发镀膜速率控制

介绍了电子束蒸发镀膜速率控制的基本原理和方法,选取实际生产中大量使用且蒸发特性较难控制的SiO_2和HfO_2,对两者的电子束蒸发速率控制分别进行了实验研究。采用比例积分微分(PID)闭环反馈控制,通过Ziegler-Nichols工程经验公式进行原始参量整定,并在实验的基础上对控制器的原始参量进行调整以及对积分作用和微分作用进行分区处理,速率控制的实验结果表明,采用该参量整定方法并结合工艺流程的改进,能获得良好的速率控制。针对速率控制中存在的难点问题进行了分析,并提出改进措施:将速率控制和电子枪扫描控制相结合能进一步改善速率控制。

PATTERNS OF SPATIAL-DISPERSION, LOCOMOTION AND FORAGING BEHAVIOR IN 3 GROUPS OF THE YUNNAN SNUB-NOSED LANGUR (RHINOPITHECUS-BIETI)

Aspects of the behaviour of three groups of Yunnan snub-nosed langurs, Rhinopithecus bieti, were observed over the course of three field seasons from 1986 to 1988. The major findings of the study were: (1) The habitats of R. bieti were mainly at heights of 3,600-4,150 m above sea level. (2) Groups were very large, with group sizes ranging from more than 100 to 269 individuals. (3) Spatial dispersion densities ranged from about 27 to 106 m2/individual during sleeping and resting, to feeding dispersions as large as 5,000-15,000 m2. (4) The locomotor repertoire of R. bieti consisted largely of walking, jumping and climbing. On very rare occasions, semibrachiation was observed, but true brachiation was never observed. The locomotor repertoires of juveniles were more diverse than those of subadults or adults. (5) Communication consisted mainly of eye-to-eye contact accompanied by murmurs; while loud calls were heard only rarely. (6) Groups moved between sleeping and feeding sites in single file. It is concluded that R. bieti is a mainly terrestrial species.

Analysis of equilateral triangle semiconductor microlasers with rough sidewalls

The mode frequencies and quality factors are calculated for the equilateral triangle semiconductor microlasers with sinusoidal and random Gaussian sidewalls. The results show that the modes can still have high Q-factors.

A semiconductor laser suitably fabricated by planar technology

The semiconductor microlasers with an equilateral triangle resonator which can be fabricated by dry etching technique from the laser wafer of the edge emitting laser, are analyzed by FDTD technique and rate equations. The results show that ETR microlaser is suitable to realize single mode operation. By connecting an output waveguide to one of the vertices of the ETR, we still can get the confined modes with high quality factors. The EM microlasers are potential light sources for photonic integrated circuits.

鞑靼荞麦（Fagopyrum tataricum Gaertn.）离体再生与遗传转化研究

鞑靼荞麦是我国特有的农业产品，具有抗寒耐旱特性和较高的营养保健功能。荞麦的开花习性及遗传特点导致其人工杂交授粉难以成功，这成为荞麦杂交育种难以获得突破的重要原因。因此利用转基因技术导入有益基因有可能成为荞麦遗传改良的新途径，而再生及转化体系的建立是开展转基因研究的基础。 本文研究了苗龄、外植体、几种激素配比对鞑靼荞麦（Fagopyrum tataricum Gaertn.）离体培养的影响，初步建立了鞑靼荞麦离体再生体系。结果表明，鞑靼荞麦离体再生的最佳取材时间为苗龄6-8d；诱导愈伤组织的最适培养基为MS＋2.0 mg/L 2,4-D＋1.5 mg/L 6-BA，子叶诱愈率达75％左右，下胚轴的可高达86.62％；愈伤组织分化的最适培养基为MS 0.1mg/L IAA＋2.0mg/L 6-BA＋1.0 mg/L KT＋0.5mg/L TDZ，下胚轴的分化率可达9.52%。下胚轴的诱愈率与分化率均高于子叶，更适于离体再生培养。培养基中加入AgNO3后，能有效降低褐化率。生根最适培养基为含有0.5mg/L NAA的1/2MS培养基，生根率在50％左右。TDZ在诱导鞑靼荞麦的愈伤组织分化出芽的过程中起到明显的促进作用，可提高分化率约20%。 在上述研究基础上，本文还对鞑靼荞麦的遗传转化体系进行了探索性研究。分别利用根癌农杆菌（Agrobacterium tumefaciens）介导法和微粒轰击法（基因枪法）对黑水苦荞下胚轴进行遗传转化。 在农杆菌介导的方法中，携带有质粒pCAMBIA2301的农杆菌菌株EHA105用于转化。载体质粒pCAMBIA2301包含有gus和npt-II 基因, 并受35s启动子驱动。研究结果表明，在侵染方式选择上，浸泡方式比吸打方式更有效，根癌农杆菌侵染的较适浓度为OD600＝0.5，共培养3天，恢复培养7天，能检测到gus基因的表达。 基因枪法使用质粒pBI121，同样包含有gus和npt-II基因, 并受CaMV35s 启动子驱动。轰击距离为9cm较合适，甘露醇前处理在本研究中未表现出明显优势。 两种转化方法比较，基因枪法比农杆菌介导法更快速有效。 本研究为进一步的遗传操作研究打下基础。 Tartary buckwheat (Fagopyrum tataricum Gaertn.), the traditional and unique agricultural product of China, is a kind of crop with strong drought and cold tolerance, abundant nutrition and high medical value. Artificial hybridization is hard in buckwheat because of its flowering habits and genetic characteristics, which leads to no breakthrough in tartary buckwheat breeding. However, biotechnological approaches, especially genetic transformation for the direct introduction of good genes into tartary buckwheat for quality improvement, hold great promise. In this study, we established tartary buckwheat regeneration system in vitro. It is the foundation for genetic manipulation of this crop. The effects of seedling age, hypocotyl and cotyledon as explants, and proportions of several growth regulators were tested in tissue culture of tartary buckwheat for establishing its in vitro regeneration system. The results showed that the best seedling age for callus induction was 6 to 8 days. On the MS medium containing 2.0mg/L 2, 4-D and 1.5mg/L 6-BA, the induction rate of callus from hypocotyls was up to 86.62%, while from cotyledons was about 75％. The suitable shooting medium was the MS medium+0.1mg/L IAA+2.0mg/L 6-BA+1.0 mg/L KT+0.5mg/L TDZ, and the shooting rate from hypocotyls was 9.52%. The callus induction and shooting rates were higher from hypocotyls than from cotyledons. Browning reduced when the medium mixed with AgNO3. Half strength MS supplemented with 0.5mg/L NAA was the best for rooting, the rate was around 50% after 30 days culture. TDZ can accelerate the shoot differentiation distinctively, and it could improve the shooting rate nearly 20%. On the base of above, the explorative research of the genetic transformation in tartary buckwheat was done. In the study, hypocotyls from Heishui tartary buckwheat were transformed by Agrobacterium-mediated method and microprojectile bombardment method (gene-gun), comparatively. In Agrobacterium-mediated method, a disarmed Agrobacterium tumefaciens strain EHA105 harboring plasmid pCAMBIA2301 was used. The vector pCAMBIA2301 contains gus and npt-II genes, driven by CaMV35s promoter. The results showed that the appropriate concentration of Agrobacterium tumefaciens for infecting was OD600＝0.5, and co-culture time was 3d. Seven days later after coculture, GUS expression could be tested. In particle bombardment transformation, plasmid pBI121 was used. pBI121 also contains gus and npt-II genes, driven by 35s promoter. Hypocotyls pretreated with mannitol, no effect was observed, and the suitable distance of bombardment is 9cm. Comparing with Agrobacterium-mediated method, gene-gun method is more convenient and effective. All above results could be a basic work for further study in tartary buckwheat transformation.

并行设备总线嵌入式控制系统设计

为了对物理实验装置的远程监控和访问,将采用32位内核芯片技术结合CPLD逻辑时序编程来设计3U VME设备总线系统。S3C4510B是三星公司针对网络应用而设计的CPU,本身带有100Mbps网络控制器,而由于Clinux系统拥有完善的TCP/IP协议,因此二者的结合为用户提供了强大的网络服务功能。该系统利用嵌入式网络和并行总线技术可稳定可靠地实现数据的快速获取与给定。

Development of external electron-beam enhancement of the Penning ionization gauge ion source

To study the injection of additional electrons from an external electron gun into the plasma of a Penning ionization gauge (PIG) ion source, a test bench for the external electron-beam enhancement of the PIG (E-PIG) ion source was set up. A source magnet assembly was built to satisfy the request for magnetic field configuration of the E-PIG ion source. Numerical calculations have been done to optimize the magnetic field configuration so as to fit the primary electrons to be fed into the PIG discharge chamber along the spreading magnetic field lines. Many possible methods for improving the performance and stability of the PIG ion source have been used in the E-PIG ion source, including the use of multicrystal LaB6 cathode and optimized axial magnetic field. This article presents a detailed design of the E-PIG ion source. Substantial enhancement of ion charge state is expected to be observed which demonstrates that the E-PIG is a viable alternative to other much more costly and difficult to operate devices for the production of intense ion beams of higher charge state.