铁基抗高温磨损激光熔覆涂层强韧设计和研究 Ⅱ:Fe-Cr-C-W-Ni激光熔覆层的微观组织及性能

利用ＯＭ、ＳＥＭ、ＴＥＭ研究了Ｆｅ－Ｃｒ－Ｃ－Ｗ－Ｎｉ激光熔覆涂层熔覆态及其高温时效态的微观组织结构。结果表明激光熔覆层组织细小，具有强韧两相组成（奥氏体和Ｍ_７Ｃ_３碳化物）的微观结构特征，高温时效处理组织中有Ｍ_（２３）Ｃ_６、Ｍ_６Ｃ、Ｍ_２Ｃ等新碳化物形成。显微硬度和冲击磨损实验证实了激光熔覆态和峰值时效态熔覆层均具有良好的力学性能。

低能离子束方法制备磁性Fe-Si合金薄膜

　利用质量分离的低能离子束技术,获得了磁性Fe Si合金薄膜。利用俄歇电子能谱法(AES)、X射线衍射法(XRD)以及交变梯度样品磁强计(AGM)测试了样品的组分、结构以及磁特性。测试结果表明在室温下制备的Fe Si合金是Fe组分渐变的非晶薄膜,具有室温铁磁性。当衬底温度为300℃时制备的非晶Fe Si薄膜中有Fe硅化物FeSi相产生,样品的铁磁性被抑制。

低能离子束方法制备Fe组分渐变的Fe-Si薄膜

利用质量分离的低能离子束技术 ,获得了Fe组分渐变的Fe Si薄膜。利用俄歇电子能谱法 (AES)、X射线衍射法 (XRD)以及X射线光电子能谱法 (XPS)测试了薄膜的组分、结构特性。测试结果表明 ,在室温下制备的Fe Si薄膜呈非晶态。非晶薄膜在 40 0℃下退火 2 0min后晶化 ,没有Fe的硅化物相形成。退火后Fe Si薄膜的Fe组分从表面向内部逐渐降低。

低能离子束方法制备重掺杂Fe的Si∶Fe固溶体

利用质量分离的低能离子束方法 ,以离子能量为 1 0 0 0 e V,剂量为 3× 1 0 1 7cm- 2 ,室温下往 p型 Si(1 1 1 )单晶衬底注入 Fe离子 ,注入的样品在 4 0 0℃真空下进行热处理 .俄歇电子能谱法 (AES)对原位注入样品深度分析表明 Fe离子浅注入到 p型 Si单晶衬底 ,注入深度约为 4 2 nm.X射线衍射法 (XRD)对热处理样品结构分析发现只有 Si衬底的衍射峰 ,没有其他新相 .X射线光电子能谱法 (XPS)对热处理样品表面分析发现 Fe2 p束缚能对应于单质 Fe的峰 ,没有形成 Fe的硅化物 .这些结果表明重掺杂 Fe的 Si∶ Fe固溶体被制备 .电化学 C- V法测量了热处理后样品载流子浓度随深度的分布 ,发现 Fe重掺杂 Si致使 Si的导电类型从 p型转为 n型 ,Si∶ Fe固溶体和 Si衬底形成 pn结 ,具有整流特性

The Effect of the Thickness of Fe2 Al5 Phase Layer at Fe/Al Interface on the Mechanics Behavior of Hot Dip Aluminizing Coating

Hot Dip Aluminized Coatings with different thickness were prepared on Q235 steel in aluminum solutions with different temperature for certain time. Through tensile tests and in-situ SEM observations, the effect of the coating's microstructure on the tensile strength of the samples was studied. It was disclosed at certain aluminum solution temperature,transaction layers mainly composed of Fe2 Al5 phase got thicker with time prolonging, and this changed initial crack's extending direction from parallel with to vertical with stretching direction. The change in crack direction decreased tensile strength of samples, thus made the coating easy to break. It was concluded that the existence of thick Fe2 Al5 phase layer was the basic reason for the lowering of tensile strength of the coating.

EDTA溶胶凝胶法制备La_2Ni_(1-x)M_xO_4(M=Cu,Fe)稀土复合氧化物

本文以EDTA溶胶凝胶法合成K2NiF4型稀土复合氧化物La2Ni1-xMxO4(M=Cu,Fe),并对反应生成粉体分别进行SEM表征与XRD测试。结果表明,选取合适的制备工艺,可以形成La2Ni1-xMxO4(M=Cu,Fe)稀土复合氧化物材料;随着掺杂离子半径增大,生成材料晶格常数a增大同时,c减少,粉体颗粒粒径较大,同时少量杂相存在。

Direct observation of adsorption sites of protein impurities and their effects on step advancement of protein crystals

We measured noninvasively step velocities of elementary two-dimensional (2D) islands on {110} faces of tetragonal lysozyme crystals, under various supersaturations, by laser confocal microscopy combined with differential interference contrast microscopy. We studied the correlation between the effects of protein impurities on the growth of elementary steps and their adsorption sites on a crystal surface, using three kinds of proteins: fluorescent-labeled lysozyme (F-lysozyme), covalently bonded dimers of lysozyme (dimer), and a 18 kDa polypeptide (18 kDa). These three protein impurities suppressed the advancement of the steps. However, they exhibited different supersaturation dependencies of the suppression of the step velocities. To clarify the cause of this difference, we observed in situ the adsorption sites of individual molecules of F-lysozyme and fluorescent-labeled dimer (F-dimer) on the crystal surface by single-molecule visualization. We found that F-lysozyme adsorbed preferentially on steps (i.e., kinks), whereas F-dimer adsorbed randomly on terraces. Taking into account the different adsorption sites of F-lysozyme and F-dimer, we could successfully explain the different effects of the impurities on the step velocities. These observations strongly suggest that 18 kDa also adsorbs randomly on terraces. Seikagaku lysozyme exhibited a complex effect that could not alone be explained by the two major impurities (dimer and 18 kDa) present in Seikagaku lysozyme, indicating that trace amounts of other impurities significantly affect the step advancement.

LiNbO3：Fe晶体光栅擦除特性

在光折变过程中，光波对掺杂中心的激发系数S是一个重要的物理量。为了求出光激发系数S对波长A的依赖，研究了在不同的擦除波长条件下，记录在光折变晶体LiNbO3：Fe中的光栅衰减特性。实验结果表明lnP（P为光擦除灵敏度）与擦除波长λ呈线性关系，即波长越短，光栅擦除越快，光擦除灵敏度越高。在单中心电子带传输模型的基础上，理论计算也证实了实验结果。利用带传输模型，给出了理论上光激发系数S对波长的指数依赖关系。同时微观量φμγ（φ为量子效率）也可由光栅擦除实验求出。

组合外加电场提高Fe：LiNbO3中90°记录体全息的衍射效率

针对90°全息记录结构的特殊性，在记录和读出阶段分别施加不同极性的外加电场，实现了Fe：LiNbO3晶体中高衍射效率的全息记录和读出。在库赫塔列夫（Kukhtarev）方程基础上引人两维耦合波理论，对组合外加电场提高掺铁铌酸锂晶体光折变特性的机理进行了探讨。实验和理论计算结果都表明这种分别在记录和读出过程施加不同极性组合的外加电场是在Fe：LiNbO3中实现高衍射效率90°记录结构体全息的有效技术方案。

LiNbO3：Fe：Ni晶体非挥发全息存储研究

采用三种不同的双光记录方案进行了LiNbO3：Fe：Ni晶体全息存储实验．详细研究了饱和衍射效率、固定衍射效率、动态范围和记录灵敏度，以及退火条件对记录的影响。结果表明，氧化LiNbO3：Fe：Ni晶体的饱和衍射效率、固定衍射效率和记录灵敏度比其他报道的双掺杂LiNbO3晶体高。结合掺杂能级图，理论分析了LiNbO3双掺杂晶体深陷阱中心能级的相对位置及其微观光学参量对全息记录性能的影响。LiNbO3：Fe：Ni晶体有望成为一种新的高效率非挥发全息存储材料。

双掺杂LiNbO3：Fe：Ru晶体的全息读出特性

为了解决读出过程中全息数据的擦除问题，研究了新型双掺杂LiNbOa：Fe：Ru晶体的全息读出特性。分析了双中心和单中心记录方案光栅的读出特性，并联立双中心物质方程和耦合波方程进行了模拟计算。结果表明，双中心记录所得到的饱和全息的读出时间常数远低于LiNbO2：Fe：Mn晶体的读出时间常数；单色光记录可以实现有效的全息，且其读出时间常数远大于记录时间常数，表现为准态非挥发读出。分析表明，这可能由于Ru的能级比Mn更靠近Fe，更易被红光激发，从而使得双中心记录所得饱和光栅的存贮持久性降低；单色光记录中红光能够

LiNbO3：Ru：Fe晶体畴反转过程中的电色效应

观察到了双掺杂LiNbO3：Ru：Fe晶体中电色效应伴随畴反转而发生，且与畴反转一样也具有可逆性，两者相辅相成，畴反转导致了晶体变色，电色效应促进了畴反转，系统的实验结果证明了两者的相辅相成性．基于铌酸锂铁电微结构模型，简要解释了其机理．而且发现在极化过程中电色效应促使了畴核的形成，使之不同于非掺杂同成分比铌酸锂晶体的矫顽场大于击穿电场，用恒定直流电场代替脉冲电场也能实现畴反转，这将为周期性极化铌酸锂的制备提供一种新的技术改进．

LiNbO3∶Fe∶Rh晶体近红外非挥发全息记录

采用双中心记录方案在双掺杂LiNbO3∶Fe∶Rh晶体中实现了近红外非挥发全息记录,研究了LiNbO3∶Fe∶Rh晶体在633 nm,752 nm,799 nm波长下的全息记录性能。结果表明,在使用近红外记录光时,其记录灵敏度随敏化光强的变化趋势与双中心短波长记录时的不同。通过和LiNbO3∶Fe∶Mn等传统双掺杂铌酸锂晶体的近红外波段记录效果对比,发现同时掺杂Fe和Rh可增强晶体对近红外光的吸收,获得更高的浅中心Fe光生伏特系数,从而能够在LiNbO3∶Fe∶Rh晶体中实现近红外波段的光折变全息记录。

Nonvolatile holograms in LiNbO3 : Fe : Cu by use of the bleaching effect

We report our observation of a bleaching effect under an ultraviolet exposure in LiNbO3:Fe:Cu crystals. Two three-step recording-transferring-fixing schemes are proposed to record nonvolatile photorefractive holograms in such crystals. In the schemes two red laser beams and an ultraviolet illumination are used selectively to write the charge grating in the shallow-level Fe centers, to develop the charge grating in the deep-level Cu centers by transferring the charge grating in the Fe centers, and to fix only the charge grating in the Cu centers for unerasable read-out. Experimental results, verifications, and an optimal recording scheme are given. A comparison of the lithium niobate crystals of the same double-doping system of Fe:Mn, Ce:Mn, Ce:Cu, and Fe:Cu is outlined. (C) 2002 Optical Society of America.

Prescription for optimizing holograms in LiNbO3 : Fe : Mn

The photorefractive holographic dynamics of grating formation in photochromic doubly doped LiNbO3:Fe:Mn crystal is studied numerically and analytically in terms of the two-center model of Kukhtarev Et al. [Ferroelectrics 22, 949 (1979)]. The relations among the recorded and fixed space-charge fields and the doping densities, the oxidation-reduction states of the fields, and the intensities of UV-sensitizing and red recording beams are studied. Important conditions and effects are feued, and an optimal prescription for material doping and oxidation-reduction processing is suggested in which the crystal can be strongly oxidized and the Mn-doping density is smaller than the Fe-doping density. (C) 2000 Optical Society of America. OCIS codes: 050.7330, 190.5330, 090.2900.