Room-temperature photonic crystal laser in H3 cavity on InGaAsP/InP slab

We fabricate and investigate two-dimensional photonic crystal H3 microcavities in an InGaAsP slab. The lasing action at room temperature is observed. The lasering threshold is 7mW under the pulsed pump of 0.75% duty cycle. The Q factor and the lasing mode characteristics are simulated by three-dimensional finite difference time domain method. The simulation result matches well with the experiment.

Quasi-continuous-wave operation of AlGaAs/GaAs quantum cascade lasers

Quasi-continuous-wave operation of AlGaAs/GaAs-based quantum cascade lasers (lambda similar to 9 mu m) up to 165 K is reported. The strong temperature dependence of the threshold current density and its higher value in high duty cycle is investigated in detail. The self-heating effect in the active region is explored by changing the operating duty cycles. The degradation of lasing performance with temperature is explained. (c) 2005 Elsevier B.V. All rights reserved.

High temperature operation of 5.5 mu m strain-compensated quantum cascaded lasers

We develop 5.5-mu m InxGa1-xAs/InyAl1-yAs strain-compensated quantum cascade lasers with InP and InGaAs cladding layers by using solid-source molecular-beam epitaxy. Pulse operation has been achieved up to 323 K (50 degrees C) for uncoated 20-mu m-wide and 2-mm-long devices. These devices display an output power of 36 mW with a duty cycle of 1% at room temperature. In continuous wave operation a record peak optical power of 10 mW per facet has been measured at 83 K.

High-power and low-threshold-current-density GaAs/AlGaAs quantum cascade lasers

We report on the realization of GaAs/AlGaAs quantum cascade lasers with an emission wavelength of 9.1 mu m above the liquid nitrogen temperature. With optimal current injection window and ridge width of 24 and 60 mu m respectively, a peak output power more than 500 mW is achieved in pulsed mode operation. A low threshold current density J(th) = 2.6 kA/cm(2) gives the devices good lasing characteristics. In a drive frequency of 1 kHz, the laser operates up to 20% duty cycle.

Realization of low threshold of InGaAs/InAlAs quantum cascade laser

By optimizing the molecule beam epitaxy growth condition, the quality of quantum cascade (QC) material has greatly been improved. The spectrum of double x-ray diffraction indicates that the interface between the constituent layers is very smooth, the lattice mismatch between the epilayer and the substrate is less than 0.1%, and the periodicity fluctuation of the active region is not more than 4.2%. The QC laser with the emission wavelength of about 5.1 mum is operated at the threshold of 0.73 kA/cm(2) at liquid nitrogen temperature with the repetition rate of 10kHz and at a duty cycle of 1%. Meanwhile, the performance of the laser can be improved with suitable post process techniques such as the metallic ohmic contact technology.

Correlation of structural and optical investigation of InGaAs/InAlAs quantum cascade laser

Double X-ray diffraction has been used to investigate InGaAs/InAlAs quantum cascade (QC) laser grown on InP substrate by molecule beam epitaxy, by means of which, excellent lattice matching, the interface smoothness, the uniformity of the thickness and the composition of the epilayer are disclosed. What is more, these results are in good agreement with designed value. The largest lattice mismatch is within 0.18% and the intersubband absorption wavelength between two quantized energy levels is achieved at about lambda = 5.1 mum at room temperature. At 77 K, the threshold density of the QC laser is less than 2.6 kA/cm(2) when the repetition rate is 5 kHz and the duty cycle is 1%. (C) 2003 Elsevier Science B.V. All rights reserved.

Experimental investigation of slow light phenomenon in photonic crystal waveguide line defect laser

The guide mode whose frequency locates in the band edge in photonic crystal single line defect waveguide has very low group velocity. So the confinement and gain of electromagnetic field in the band edge are strongly enhanced. Photonic crystal waveguide laser is fabricated and the slow light phenomenon is investigated. The laser is pumped by pulsed pumping light at 980nm whose duty ratio is 0.05%. The active layer in photonic crystal slab is InGaAsP multiple quantum well. Light is transimited by a photonic crystal chirp waveguide in one facet of the laser. Then the output light is coupled to a fiber and the character of laser is analysis by an optical spectrometer. It is found that single mode and multimode happens with different power of pumping light. Meanwhile the plane wave expansion and finite-difference time-domain methods are used to simulate the phenomenon of slow light. And the result of the experiment is compared with the theory which proves the slow light results in lasing oscillation.

Self-heating effect in 1.3 mu m p-doped InAs/GaAs quantum dot vertical cavity surface emitting lasers

The self-heating effect in 1.3 mu m p-doped InAs/GaAs quantum dot (QD) vertical cavity surface emitting lasers (VCSELs) has been investigated using a self-consistent theoretical model. Good agreement is obtained between theoretical analysis and experimental results under pulsed operation. The results show that in p-doped QD VCSELs, the output power is significantly influenced by self-heating. About 60% of output power is limited by self-heating in a device with oxide aperture of 5x6 mu m(2). This value reduces to 55% and 48%, respectively, as the oxide aperture increases to 7x8 and 15x15 mu m(2). The temperature increase in the active region and injection efficiency of the QDs are calculated and discussed based on the different oxide aperture areas and duty cycle.

Stable single-mode distributed feedback quantum cascade laser with surface metal grating

A design of single-mode distributed feedback quantum cascade lasers (DFB-QCLs) with surface metal grating is described. A rigorous modal expansion theory is adopted to analyse the interaction between the waveguide mode and the surface plasmon wave for different grating parameters. A stable single-mode operation can be obtained in a wide range of grating depths and duty cycles. The single-mode operation of surface metal grating DFB-QCLs at room temperature for lambda = 8.5 mu m is demonstrated. The device shows a side-mode suppression ratio of above 20 dB. A linear tuning of wavelength with temperature indicates the stable single-mode operation without mode hopping.

特权约束系统职责隔离问题研究

特权控制操作系统最重要的资源，需要应用职责隔离原则，确保特权安全．与现有研究不同，从特权隐式授权方面探讨对职责隔离的支持问题．通过分析特权来源，将特权定义分解为约束规则与执行规则，弥补了现有访问控制研究中对权限效果描述不足的缺陷．两类规则间的逻辑推导说明授权间的推导关系，即特权问存在隐式授权，可能不满足职责隔离要求．利用授权推导关系图准确而全面地反映了特权机制的所有隐式授权．从特权的职责隔离属性，及职责隔离对特权的机制要求两方面探讨上层职责隔离需求与底层特权控制实施的一致性问题．以目前广泛应用的POSIX权能机制为例，给出其形式化模型BMPS模型的定义，指出该机制支持职责隔离存在的问题，并对该机制进行了改进，给出满足职责隔离要求的特权策略实施方案．

AIN Monolithic Microchannel Cooled Heatsink for High Power Laser Diode Array

A novel AIN monolithic microchannel cooled heatsink for high power laser diode array is introduced.The high power stack laser diode array with an AIN monolithic microchannel heatsink is fabricated and tested.The thermal impedance of a 10 stack laser diode array is 0.121℃/W.The pitch between two adjacent bars is 1.17mm.The power level of 611W is achieved under the 20% duty factor condition at an emission wavelength around 808nm.

全永磁ECR离子源研究进展

Electron Cyclotron Resonance (ECR) ion source is regarded as the most efficient machine to produce stable multiple charge state ion beams. Because of the special characteristics, all-permanent magnet ECR ion sources have been widely adopted around the world to produce stable ion beams of multiple charge state with good repetition have been widely adopted around the world to produce stable ion beams of multiple charge state with good repetition and high duty factor for compact research platforms and ion beam implanters. In this paper, all-permanent magnet ECR ion sources developed at IMP are presented, and typical parameters and performances are discussed. The high charge state source, LAPECR2, is mainly used to produce intense high charge state ion beams, and the LAPECR1 source is designed to produce intense ion beams of medium and low charge state. An improved LAPECR1-M is specially designed to produce heavy metal ion beams of low charge state. These ECR ion sources have been adopted by different experimental terminals at IMP and, with their nice performance, many experimental studies could be possible. 中文文摘：ECR(电子回旋共振)离子源是产生稳定的强流多电荷态离子束流最有效装置。全永磁ECR 离子源因其独特的特点为很多中小型多电荷态离子束流实验平台与离子注入机等系统所采用，为后者产生重复性好、稳定性强的多电荷态离子束流。本文着重论述了中国科学院近代物理研究所研制的几台全永磁多电荷态ECR 离子源及其特性与典型性能，如能产生强流高电荷态离子束流的高性能全永磁离子源LAPECR2，能产生强流中 低电荷态离子束流的LAPECR1，能产生多电荷态重金属离子束流的LAPECR1-M 等。这些性能稳定的离子源为提高近代物理研究所相关试验平台的性能提供了关键的束流品质保障。

The effect of human rhythm on packet delivery

In communication networks such as the Internet, the relationship between packet generation rate and time is similar to a rectangle wavefunction due to the rhythm of humans. Thus, we investigate the traffic dynamics on a network with a rectangle wavepacket generation rate. It is found that the critical delivering capacity parameter beta(c) (which separates the congested phase and the free phase) decreases significantly with the duty cycle r of the rectangle wave for package generation. And, in the congested phase, more collective generation of packets (smaller r) is helpful for decreasing the packet aggregation rate. Moreover, it is found that the congested phase can be divided into two regions, i.e., region1 and region2, where the distributions of queue lengths are nonlinear and linear, respectively. Also, the linear expression for the distribution of queue lengths in region2 is obtained analytically. Our work reveals an obvious effect of the rectangle wave on the traffic dynamics and the queue length distribution in the system, which is of essential interest and may provide insights into the designing of work-rest schedules and routing strategies.

一种新型柔索驱动并联机器人的模型样机

提出一种新型并联机器人机构 ,利用张紧柔索驱动该并联机器人·通过运动学和动力学分析、工作空间分析、轨迹规划、误差分析 ,设计并制作了模型样机本体、驱动与控制模块 ,开发了机器人语言 ,控制模型样机完成指定动作·实验结果表明 ,这种新型并联机器人是可行的 ,适用于轻型机床等设备·该机器人在某一速度范围内工作时 ,会产生较明显的振动 ,并伴有噪声 ,因此要提高机器人的性能还必须设法抑制其振动

海拉尔盆地贝尔凹陷基岩潜山特征及储层预测

The lithology of the buried hill of Triassic Budate group in Beier depression is epimetamorphic clastic rock and volcanic clastic rock stratum. Recently the favorable hydrocarbon show was discovered in buried hill of base rock, and large-duty industrial oil stream was obtained in some wells in Beier depression. Based on the information of seismos and wells, the tectonic framework, tectonic deformation times and faulted system of the Beier depression are comprehensively studied, then configuration, evolutional history, genetic type and distributed regularity of buried hill are defined. According to observing description and analysis of core sample, well logging and interpretive result of FMI, the lithological component, diagenetic type and diagenetic sequence of buried hill reservoir are confirmed, then reservoir space system of buried hill is distinguished, and vegetal feature, genetic mechanism and distributed regularity of buried hill fissure are researched, at the same time the quantitative relationship is build up between core fissures and fissures interpreted by FMI. After that fundamental supervisory action of fault is defined to the vegetal degree of fissure, and the fissure beneficial places are forecasted using fractal theory and approach. At last the beneficial areas of Budate group reservoir are forecasted by reservoir appraisal parameters optimization such as multivariate gradually regression analysis et. al. and reservoir comprehensive appraisal method such as weighing analyze and clustering procedure et. al. which can provide foundation for the next exploratory disposition. Such production and knowledge are obtained in this text as those: 1. Four structural layers and two faulting systems are developed, and four structural layers are carved up by three bed succession boundary surfaces which creates three tectonic distortional times homology. Three types of buried hill are divided, they are ancient physiognomy buried hill, epigenetic buried hill, and contemporaneous buried hill. 2. Reservoir space of Budate buried hill is mainly secondary pore space and fissure, which distributes near the unconformity and/or inside buried hill in sections. The buried hill reservoir experienced multi-type and multi-stage diagenetic reconstruction, which led to the original porosity disappeared, and multi secondary porosity was created by dissolution, superficial clastation and cataclasis et. al. in diagenetic stage, which including middle crystal pore, inter crystal pore, moldic pore, inter particle emposieu, corrosion pore space and fissure et. al. which improved distinctly reservoir capability of buried hill. 3. The inner reservoir of buried hill in Beier depression is not stratigraphic bedded construction, but is fissure developing place formed by inner fault and broken lithogenetic belt. The fissures in inner reservoir of buried hill are developed unequally with many fissure types, which mainly are high angle fissure and dictyonal fissures and its developing degree and distribution is chiefly controlled by faulting. 4. The results of reservoir comprehensive evaluate and reservoir predicting indicates that advantageous areas of reservoir of buried hill chiefly distributes in Sudeerte, Beixi and Huoduomoer, which comprehensive evaluate mainly Ⅱand Ⅲ type reservoir. The clues and results of this text have directive significance for understanding the hydrocarbon reservoir condition of buried hill in Beier depression, for studying hydrocarbon accumulated mechanism and distributed regularity, and for guiding oil and gas exploration. The results of this text also can enrich and improve nonmarine hydrocarbon accumulated theory.