EFFECT OF ELEVATED BICARBONATE CONCENTRATION ON GROWTH, CHLOROPHYLL A FLUORESCENCE AND ULTRA-STRUCTURE OF Microcystis aeruginosa (CYANOBACTERIUM)

The influence of bicarbonate (HCO3-) on Microcystis aeruginosa FACHB 905 was assessed in this study. Growth curves, chlorophyll a fluorescence and ultrastructure were measured at two HCO3- concentrations, 2.3 mM and 12.4 mM. A treatment of sodium chloride (NaCl) was also conducted alongside to establish the influence level of sodium. It was found that upon treatment with elevated HCO3- concentrations of 2.3 mM and 12.4 mM, cell densities were 13% and 27% (respectively) higher than controls. In photosynthetic performance, elevated HCO3- concentration initially stimulated Fv/Fm at the prophase of culture and then subsequently inhibited it. The inhibition of 2.3mM was higher than that of 12.4mM HCO3-. The maximum relative electron transport rate (ETRmax) exhibited inhibition at elevated HCO3- concentrations. DI0/CS was decreased at 2.3 mM and increased at 12.4mM. In the case of both treatments. ABS/CSI TR0/CS, ET0/CS, RC/CS0 and RC/CSm were decreased by elevated HCO3- concentrations, which indicated damage to photosynthetic apparati and an inactivation of a fraction of reaction centers. This point was also proven by ultrastructural photos. High HCO3--exposed cells lost the characteristic photosynthetic membrane arrangement compared with the control and high salinity treated samples. At the 2.3mM concentration of HCO3-. damage to photosynthetic apparati caused decreased photosynthetic activity. These findings suggested that elevated HCO3- concentration stimulated the growth and photosynthesis of M. aeruginosa FACHB 905 in a short time. Exposure to high HCO3- concentrations for a longer period of time will damage photosynthetic apparatus. In addition, the ultrastructure indicated that elevated HCO3--concentration lead to photosynthetic apparati damage. In our experiment, it was observed that the inhibition effect of 2.3mM HCO3- was higher than that of 12.4mM HCO3-. We hypothesized that M. aeruginosa FACHB 905 induced a protective mechanism under high concentrations of HCO3-.

Determination of the surface area of common carp, Cyprinus carpio L.

A wrap method adaptation combined with AutoCAD2005 and Scion Image for Windows were used to determine the surface area of a fish. Compared with the corresponding r(2) and F of many models, the most accurate formula: S = 752.15W(0.675) (r(2) = 0.999, F = 18362.94, P < 0.0001) for estimating the surface area of common carp was obtained. Similarly, the fin formula: S = 1834.12W(0.708) (r(2) = 0.992, F = 2690.47, P < 0.0001) was also obtained for the same purpose. It was proven that these two formulae gave good estimates of surface and fin areas of four strains of common carp: Yellow-river carp, fancy carp, mirror carp and Xingguo red carp.

Photosynthetic recovery of desiccated intertidal seaweeds after rehydration

Intertidal seaweeds experience periodical desiccation and rehydration to different extents due to the tidal cycles and their vertical distributions. Their photosynthetic recovery process during the rehydration may show different patterns among the seaweeds from different zonations or depths at intertidal zone. In this study 12 species of seaweeds collected from the upper, middle, lower and sublittoral zones were examined. The relationship of the photosynthetic recovery to vertical distribution was assessed by comparing their patterns of photosynthetic and respiratory performances after rehydration following desiccation. Both the photosynthesis and dark respiration declined during emersion, showing certain degrees of recovery after re-immersion into seawater for most species, but the extents were markedly different from one species to the other. The species from upper intertidal zone after being rehydrated for 1 hour, following 2 hours of desiccation, achieved 100 % recovery of their initial physiological activity, while most of the lower or sublittoral species did not achieve full recovery. It is the ability to withstand desiccation stress (fast recovery during rehydration), but not that to avoid desiccation (water retaining ability) that determines the distribution of intertidal seaweeds. Such physiological behavior during rehydration after desiccation reflects the adaptive strategy of intertidal seaweeds against desiccation and their capability of primary production in the process of rehydration.

Identification of two novel interferon-stimulated genes from cultured CAB cells induced by UV-inactivated grass carp hemorrhage virus

Interferon (IFN) exerts its antiviral effect by inducing the expression of a number of IFN-stimulated genes (ISGs) to establish a host antiviral state. Earlier studies identified some important fish IFN system genes from IFN-induced CAB cells (crucian carp Carassius auratus L. embryonic blastulae cells) after treatment with UV-inactivated GCHV (grass carp hemorrhage virus). Herein, the cloning of 2 novel IFN-stimulated genes, termed Gig1 and Gig2, is described for the same cell system. The complete cDNA sequences of Gig1 and Gig2 contain 1244 bp encoding for a 194-amino-acid protein and 693 bp for a 158-amino-acid protein, respectively. A search of public databases revealed that these are 2 novel IFN-stimulated genes, since neither significant homologous genes nor conserved motifs were identified. Active GCHV, UV-inactivated GCHV and CAB IFN-containing supernatant (ICS) induced transcription of these genes and distinct kinetics were observed. An analysis of differences in expression between the 2 genes and the IFN signal factors CaSTAT1 and CaIRF7 indicated that GCHV infection activated different signal pathways for their up-regulation. Upon virus infection, the transcription of Gig1 but not of Gig2 is strongly suppressed by cycloheximide (CHX). In contrast, following treatment with CAB IFN-containing supernatant, CHX does not inhibit either gene transcription. The results suggest that GCHV infection can induce expression of both Gig1 and Gig2 via newly synthesized CAB IFN, most probably through the JAK-STAT signal pathway, and can also directly activate Gig2 transcription without ongoing protein synthesis.

Characterization of AlGaN on GaN template grown by MOCVD - art. no. 68410K

AlxGa1-xN layer was grown on sapphire substrate with GaN template by Metal Organic Chemical Vapor Deposition system (MOCVD). High temperature A1N (HT-A1N) interlayer was inserted between AlxGa1-xN layer and GaN template to solve the cracking problem that often appears on AlxGa1-xN surface when directly grown on high temperature GaN template. Optical microscope, scanning electron microscopy (SEM), atomic force microscope (AFM), high resolution x-ray diffraction (HRXRD) and cathodoluminescence (CL) were used for characterization. It was found that the cracking was successfully eliminated. Furthermore, the crystalline quality of AlxGa1-xN layer with HT-A1N interlayer was much improved. Interference fringes were found in the HRXRD images. CL test showed that yellow emission was much reduced for AlGaN layer with HT-A1N interlayer.

EDWA用基础玻璃的光谱特性研究

制备了掺Er¨ 和Er¨／Yb¨共掺的可用于EDWA(掺铒波导放大器)的Na20．B，0 ．SiO， 玻璃．吸收光谱特性表明：不同掺杂Er20 浓度基础玻璃峰位置基本相同，但玻璃在相同波长处的 吸收率随着Er203浓度的增加而增大；光敏剂Yb 0 的加入明显增大了样品在978 nm处的吸收面 积；荧光光谱特性表明：随着Er O 浓度的增加玻璃在1536 nm处的荧光半高宽(FWHM)由80 nm 减小到40 nm，从而确定本体系的Er20 掺杂浓度为0．2 mo1％ 左右较好．

A Hybrid Random Number Generator Using Single Electron Tunneling Junctions and MOS Transistors

This paper proposes a novel single electron random number generator (RNG). The generator consists of multiple tunneling junctions (MTJ) and a hybrid single electron transistor (SET)/MOS output circuit. It is an oscillator-based RNG. MTJ is used to implement a high-frequency oscillator,which uses the inherent physical randomness in tunneling events of the MTJ to achieve large frequency drift. The hybrid SET and MOS output circuit is used to amplify and buffer the output signal of the MTJ oscillator. The RNG circuit generates high-quality random digital sequences with a simple structure. The operation speed of this circuit is as high as 1GHz. The circuit also has good driven capability and low power dissipation. This novel random number generator is a promising device for future cryptographic systems and communication applications.

倒装结构大功率蓝光LEDs的研制

从器件制作角度入手，对基于Ⅲ族氮化物的功率型蓝光LEDs结构和电极体系进行了优化设计。采用梳状结构、高反电极体系及倒装焊技术，研制出大功率蓝光LEDs，在350mA工作电流下，工作电压为3．3～3．5V，输出功率达137．71mW，反向5V电压下的漏电流小于1μA。

Flash-lamp-pumped picosecond Nd:YAG regenerative amplifier

A flash-lamp-pumped Nd

半导体纳米材料和物理

半导体纳米材料是纳米材料的一个重要组成部分，纳米结构的电子和光子器件将成为下一代微电子和光电子器件的核心。文章介绍了半导体纳米材料的新进展，包括四个方面：半导体自组织生长量子点，纳米晶体，微腔光子晶体和纳米结构中的自旋电子学。本世纪开始的半导体纳米材料的是上世纪半导体超晶格量子阱研究的延续，同时双开辟了一些新领域，如：单电子的电子学、单光子的光子学，微腔和光子晶体，稀磁半导体和自旋电子的相干输运等，这些研究将为研制在新原理基础上的新器件和实现量子计算、量子通信打下基础。

代数免疫阶最高的Boole函数的构造和计数

代数免疫阶是针对代数攻击而提出的新的密码准则。为了抵抗代数攻击,流密码中所使用的Boole函数应该具有高代数免疫阶。文中运用替换掉Dalai所构造的代数免疫对称Boole函数支撑集中一些点的方法构造了大量具有最高代数免疫阶的Boole函数,并给出了所构造函数的计数。特别地,对于某些代数次数低于n/2的多项式p(x),构造了代数标准形中单项式系数都不小于n/2的q(x)使得p(x)+q(x)具有最高代数免疫阶。