40 resultados para 169-1035E
Resumo:
对不可压缩流体三维Rayleigh-Taylor不稳定性问题建立被动标量输运模型,用大涡模拟方法计算了正弦初始扰动和随机初始扰动下不稳定性发展各个阶段的瞬时速度度场和标量场,以及混合过程中计算尺度和亚格子尺度上的平均湍流脉动能、平均剪切应力和被动标量通量;分析了 界面形状、被动标量浓度分布的演化规律及气泡、尖钉速度和混合层宽度随时间的变化规律,计算结果与其他数值模拟和实验结果相吻合,验证了大涡模拟方法应用于该问题的可行性。
Resumo:
本文简介研制民航客舱防爆箱遇到的困难,指出这是爆炸火球区内抗爆容器的设计问题。在实验和理论分析基础上,就爆炸火球区内抗爆措施提出了建议并得到验证。
Resumo:
A recoverable plate impact testing technology has been used for studying the growth mechanisms of mode II crack. The results show that interactions of microcracks ahead of a crack tip cause the crack growth unsteadily. Failure mode transitions of materials were observed. Based on the observations, a discontinuous crack growth model was established. Analysis shows that the shear crack grows unsteady as the growth speed is between the Rayleigh wave speed c(R) and the shear wave speed c(s); however, when the growth speed approaches root 2c(s), the crack grows steadily. The transient microcrack growth makes the main crack speed to jump from subsonic to intersonic and the steady growth of all the sub-cracks leads the main crack to grow stably at an intersonic speed.
Resumo:
目录
- 1.1 化合物的生成焓,反应焓及燃烧热
- 1.2 热化学定律
- 1.3 热力学平衡与自由能,化学平衡与反应自由能
- 1.4 质量作用定律及可逆反应的平衡常数
- 1.5 平衡常数和标准反应自由能的关系
- 1.6 温度和压力对平衡常数的影响
- 1.7 绝热火焰温度计算
- 1.8 化学动力学中采用的几个基本概念和定义
- 1.9 反应的分类
- 1.10 阿累尼乌斯(Arrhenius)定律
- 1.11 双分子反应碰撞理论
- 1.12 反应分子数及反应级数
- 1.13 影响化学反应的因素
- 1.14 链锁反应
- 5.1 燃烧波的两种形式――缓燃(或火焰正常传播)及爆震
- 5.3 马兰特和利-恰及利耶的简化分析法
- 5.4 层流火焰传播速度的无量纲分析法
- 5.5 泽尔多维奇和弗朗克-卡门涅茨基的分区近似解
- 5.6 分区近似解的改进
- 5.7 精确解
- 5.8 物理化学参数对S1的影响及对火焰厚度的影响
- 5.9 火焰传播界限
- 5.10 用层流火焰传播速度计算化学动力参数的方法
- 5.11 火焰的基本性质及火焰的几何学
- 5.12 本生灯火焰稳定的条件
- 5.13 层流火焰传播速度的实验测定
- 5.14 单组元燃料滴燃烧
Resumo:
A biosensor based on imaging ellipsometry (BIE) has been developed and validated in 169 patients for detecting five markers of hepatitis B virus (HBV) infection. The methodology has been established to pave the way for clinical diagnosis, including ligand screening, determination of the sensitivity, set-up of cut-off values (CoVs) and comparison with other clinical methods. A matrix assay method was established for ligand screening. The CoVs of HBV markers were derived with the help of receiver operating characteristic curves. Enzyme-linked immunosorbent assay (ELISA) was the reference method. Ligands with high bioactivity were selected and sensitivities of 1 ng/mL and 1 IU/mL for hepatitis B surface antigen (HBsAg) and surface antibody (anti-HBs) were obtained respectively. The CoVs of HBsAg, anti-HBs, hepatitis B e antigen, hepatitis B e antibody and core antibody were as follows: 15%, 18%, 15%, 20% and 15%, respectively, which were the percentages over the values of corresponding ligand controls. BIE can simultaneously detect up to five markers within 1 h with results in acceptable agreement with ELISA, and thus shows a potential for diagnosing hepatitis B with high throughput.
Resumo:
The exhaust gases from industrial furnaces contain a huge amount of heat and chemical enthalpy. However, it is hard to recover this energy since exhaust gases invariably contain combustible components such as carbon monoxide (CC). If the CO is unexpectedly ignited during the heat recovery process, deflagration or even detonation could occur, with serious consequences such as complete destruction of the equipment. In order to safely utilize the heat energy contained in exhaust gas, danger of its explosion must be fully avoided. The mechanism of gas deflagration and its prevention must therefore be studied. In this paper, we describe a numerical and experimental investigation of the deflagration process in a semi-opened tube. The results show that, upon ignition, a low-pressure wave initially spreads within the tube and then deflagration begins. For the purpose of preventing deflagration, an appropriate amount of nitrogen was injected into the tube at a fixed position. Both simulation and experimental results have shown that the injection of inert gas can successfully interrupt the deflagration process. The peak value of the deflagration pressure can thereby be reduced by around 50%. (C) 2008 Elsevier Ltd. All rights reserved.
Resumo:
通过数值求解含时薛定谔方程,研究超短激光脉冲与三能级Λ型原子相互作用过程中影响原子电离态跃迁几率的几个因素,如:绝对相位,啁啾率等。研究结果表明激光绝对相位、啁啾率的大小是关系态跃迁几率的重要因素,通过调节超短激光脉冲的绝对相位和啁啾率,可以将态跃迁几率控制到较大的水平。本文研究结果为实验上对态跃迁几率的控制提供了相关理论基础。
Resumo:
介绍了硬X射线(类同轴)相位衬度成像的工作原理及其实验研究结果。X射线波长为0.08860nm,样品为未经任何处理的飞蛾,记录介质为X射线胶片。胶片经处理以后,用光学显微镜读出,可以看出样品的许多细节,尤其在折射率突变处。而同样条件下基于吸收衬度机制的硬X射线吸收成像,由于是弱吸收样品.没有观察到任何图像。
Resumo:
建立了一套用于玻色.爱因斯坦凝聚实验的铷原子双磁光阱装置.从低速强源中获得慢原子柬,向超高真空磁光阱进行原子转移.低速强源磁光阱与超高真空磁光阱之间可维持3个量级的压强差,超高真空磁光阱的真空度最高可达1×10^-9Pa.慢原子束的束流通量达1×10^9/s.约4×10^8个^17Rb原子被装载到超高真空磁光阱中.还讨论了两种典型情况下磁光阱中装载的最大原子数.
Resumo:
Crystallization in amorphous Ge2Sb2Te5 films by irradiation with femtosecond laser was investigated. The reflectivity and X-ray diffraction measurements confirmed that the crystalline state has been achieved in amorphous Ge2Sb2Te5 films under the irradiation of fermosecond laser with an average power of 65 mW at a frequency of 1000 Hz and a pulsed width of 120 fs. The surface morphology before and after femtosecond laser irradiation was studied by scanning electron microscope; results showed that the surface of films with irradiation of femtosecond laser was composed of some the crystallized micro-region. (C) 2004 Elsevier B.V. All rights reserved.
Resumo:
利用气相传输平衡技术(VTE)和后退火处理工艺在(0001)蓝宝石衬底上获得了高度[100]取向的γ-LiAlO2薄膜.X射线衍射表明是由单相的γ-LiAlO2所组成,此薄膜经850~900℃/120h空气中退火处理后显示出高度的[100]取向,这一实验结果意味着有望通过VTE方法制备用于GaN基器件外延生长的γ-LiAlO2(100)-Al2O3(0001)复合衬底.