Improved performances of organic light-emitting diodes with metal oxide as anode buffer

We demonstrate extremely stable and highly efficient organic light-emitting diodes (OLEDs) based on molybdenum oxide (MoO3) as a buffer layer on indium tin oxide (ITO). The significant features of MoO3 as a buffer layer are that the OLEDs show low operational voltage, high electroluminescence (EL) efficiency and good stability in a wide range of MoO3 thickness. A green OLED with structure of ITO/MoO3/N,N-'-di(naphthalene-1-yl)-N,N-'-diphenyl-benzidene (NPB)/NPB: tris(8-hydroxyquinoline) aluminum (Alq(3)):10-(2-benzothiazolyl)-2,3,6,7-tetrahydro-1,1,7,7-tetramethyl-1H, 5H, 11H-(1)-benzopyropyrano(6,7-8-i,j)quinolizin-11-one (C545T)/Alq(3)/LiF/Al shows a long lifetime of over 50 000 h at 100 cd/m(2) initial luminance, and the power efficiency reaches 15 lm/W. The turn-on voltage is 2.4 V, and the operational voltage at 1000 cd/m(2) luminance is only 6.9 V. The significant enhancement of the EL performance is attributed to the improvement of hole injection and interface stability at anode.

High efficiency tandem organic light-emitting devices with Al/WO3/Au interconnecting layer

An interconnecting layer of Al (2 nm)/WO3 (3 nm)/Au (16 nm) was studied for application in tandem organic light-emitting devices. It can be seen that the Al/WO3/Au structure plays the role of an excellent interconnecting layer. The introduction of WO3 in the connection unit significantly improves the device efficiency as compared to the case of Al/Au. Thus, the current efficiency of the two-unit tandem devices is enhanced by two factors with respect to the one-unit devices. The green two-unit tandem device of indium tin oxide/MoO3/4,4(')-N,N-'-bis[N-(1-naphthyl)-N-phenyl-amino]biphenyl(NPB)/tris(8-hydroxylquinoline) aluminum (Alq(3)):10-(2-benzothiazolyl)-1,1,7,7-tetramethyl-2,3,6,7-tetrahydro-1H,5H,11H-[1]benzopyrano[6,7,8-ij]quinolizin-11-one (C545T)/Alq(3)/LiF/Al/WO3/Au/MoO3/NPB/Alq(3):C545T/Alq(3)/LiF/Al showed a maximum current efficiency of 33.9 cd/A and a power efficiency of 12.0 lm/W.

Effect of cerium on microstructure and electrochemical performance of Ti-V-Cr-Ni electrode alloy

Effect of cerium on the microstructure and electrochemical performance of the Ti0.25V0.35-xCexCr0.1Ni0.3 (x = 0, 0.005) electrode alloy was investigated by X-ray diffraction (XRD), field emission scanning electron microscopy/energy dispersive X-ray spectrometry (FESEM-EDS), and electrochemical impedance spectroscopy (EIS) measurements. On the basis of XRD and FESEM-EDS analysis, the alloy was mainly composed of V-based solid solution with body-centered-cubic structure and TiNi-based secondary phase. Ce did not exist in two phases, instead, it existed as Ce-rich small white particles, with irregular edges, distributed near the grain boundaries of the V-based solid solution phase. Discharge capacity, cycle stability, and high-rate discharge ability of the alloy electrode were effectively improved with the addition of Ce at 293 K. It was very surprising that the charge retention was abnormal with larger discharge capacity after standing at the open circuit for 24 h. EIS indicated that addition of Ce improved the dynamic performance, which caused the charge transfer resistance (R-T) to decrease and exchange current density (I-0) to increase markedly. The exchange current density of the electrochemical reaction on the alloy surface with Ce addition was about 2.07 and 3.10 times larger than that of the alloy without Ce at 303 and 343 K, respectively.

一种提取精制苦杏仁苷的方法

一种提取精制苦杏仁苷的植物原料粉碎成粉状物，制成原料粉；以CO2为萃取剂对原料粉进行油脂脱除，萃取压力15～35MPa，温度在31.1～60℃；含有植物油脂的二氧化碳进行加压分离，按固液比1:3～10在含有苦杏仁苷的渣粉中加入酒精，搅拌，抽滤，得抽滤液；抽滤液经蒸馏、干燥，得苦杏仁苷粗品；将苦杏仁苷溶解在乙醇中，低温结晶，过滤干燥后得高纯度苦杏仁苷。本发明克服了压榨脱油过程脱脂不干净及局部高温引起的苦杏仁苷分解等缺点，不使用己烷等有毒易燃溶剂，产品纯度高，工艺简单。

人卵巢癌耐药细胞株的比较蛋白质组分析

卵巢癌是妇科疾病中仅次于宫颈癌和子宫内膜癌的常见肿瘤,死亡率较高[1].该肿瘤治疗失败的主要原因之一是复发后的肿瘤细胞凋亡抵抗机制导致化疗的耐药性.在卵巢癌的化疗中顺铂是主要使用的药物之一,但由于细胞多药耐药性的产生严重限制了其疗效的发挥[2].蛋白质组学是在蛋白水平上对整个器官、细胞或组织的基因组所表达的全部蛋白质进行总体分析,双向凝胶电泳和质谱技术则是研究蛋白质组学的核心技术.为探索与耐药相关的蛋白质,本文采用高分辨二维凝胶电泳分离技术对人卵巢癌细胞株COC1及其耐药细胞株COC1/DDP中的蛋白质进行分离和差异表达分析,应用基质辅助激光解吸电离-飞行时间质谱对酶解多肽进行测定[即测定蛋白质的肽质量指纹图(Peptide massfingerprinting,PMF)],并通过相应的数据库搜索来鉴定蛋白质.为获得更准确的检索结果,采用串联质谱技术对各肽段进行氨基酸测序,并应用IPI-HUMAN数据库对上述检索结果进一步加以确认.1实验部分1.1试剂IPG预制胶条(pH 3~10,17 cm)、载体两性电解质和矿物油(M ineral O il)均购自美国B io-Rad公司.Urea、蔗糖、G lycer...

轻稀土镧、铈急性生物效应的血清~1HNMR谱代谢组学研究

采用现代核磁共振和模式识别技术,通过分析腹腔注射给药La(NO3)3(2,10和50mg/kg体重)和Ce(NO3)3(2,10和50mg/kg体重)48h后大鼠血清的核磁共振氢谱,由内源性代谢物浓度的变化研究了两种稀土化合物在大鼠体内的急性生物效应,利用主成分分析法对两者进行了分类比较.在低剂量(2mg/kg体重)组La(NO3)3和Ce(NO3)3血清中,乳酸和肌酸酐等内源性代谢物浓度发生了微小变化;在高剂量组(10和50mg/kg体重)中,含量变化较大的重要内源性代谢物包括3羟丁酸、丙氨酸、肌酸酐、丙酮、乙酸、琥珀酸和葡萄糖等,其中3羟丁酸和丙氨酸等在La的剂量组中变化较大,Ce的剂量组血清中丙酮、琥珀酸和葡萄糖含量变化明显.实验结果表明,低剂量La和Ce的毒性较低,并对机体影响较小,高剂量则对大鼠肝脏造成损伤,且Ce的毒性大于La.

Evaluation of a sol-gel derived carbon composite electrode as an amperometric detector for capillary electrophoresis

In this paper, we report the construction and application of a sol-gel derived carbon composite electrode (CCE) as an amperometric detector for capillary electrophoresis. The electrochemical properties were characterized and compared with those of conventional carbon fiber and carbon paste electrode (CPE). Experimental results show that peak-to-peak noise of CCE was about 20% of CPE and electrode capacitance was comparatively low. When applied to the detection of dopamine and epinephrine, the optimal detection potential for CCE was 0.1 V lower than CPE under the same separation conditions; CCE with diameter of 75 and 100 mum could achieve a low detection limit of 3.10(-8) and 6.10(-8) M for the detection of epinephrine, which approaching that of the 33-mum diameter carbon fiber electrode. Also, the linearity for epinephrine at CCE was more than two orders of magnitude, which was slightly wider than that of carbon fiber electrode. Applications to real sample analysis were tested by the determination of betahistine dihydrochloride in tablets and human urine. Using CCE with diameter less than or equal to100 mum as an amperometric detector after capillary electrophoresis separation, a low detection limit and a wide linear range combined with excellent reproducibility were obtained. This CCE possesses of many advantages, namely, convenience, ease of fabrication, low cost and high stability.

Capillary electrophoresis with amperometric detection of curcumin in Chinese herbal medicine pretreated by solid-phase extraction

In the present study, curcumin from Chinese herbal medicine turmeric was determined by capillary electrophoresis with amperometric detection (CE-AD) pretreated by a self-designed, simple, inexpensive solid-phase extraction (SPE) cartridge based on the material of tributyl phosphate resin. An average concentration factor of 9 with the recovery of >80% was achieved when applied to the analysis of curcumin in extracts of turmeric. Under the optimized CE-AD conditions: a running buffer composed of 15 mM phosphate buffer at a pH 9.7, separation voltage at 16 W, injection for 6 s at 9 W and detection at 1.20 V, CE-AD with SPE exhibited low detection limit as 3 - 10(-8) mol/l (SIN = 3), high efficiency of 1.0(.)10(5) N, linear range of 7(.)10(-4) -3(.)10(-6) mol/l (r = 0.9986) for curcumin extracted from light petroleum. The method developed resulted in enhancement of the detection sensitivity and reduction of interference from sample matrix in complicated samples and exhibited the potential application for routine analysis, especially in food, because a relatively complete process of sample treatment and analysis was described.

Influence of capping ligands on the self-organizations of gold nanoparticles into superlattice from CTAB reverse micelles

Gold nanoparticles with size 3-10 nm (diameter) were prepared by the reduction of HAuCl4 in a CTAB/octane + 1-butanol/H2O reverse micelle system using NaBH4 as the reducing agent. The as-formed gold nanoparticle colloid was characterized by UV/vis absorption spectrum and transmission electron microscopy(TEM). Various capping ligands, such as alkylthiols with different chain length and shape, trioctylphosphine (TOP), and pyridine are used to passivate the gold nanoparticles for the purpose of self-organization into superstructures. It is shown that the ligands have a great influence on the self-organization of gold nanoparticles into superlattices, and dodecanethiol C12H25SH is confirmed to be the best ligand for the self-organization. Self-organization of C12H25SH-capped gold nanoparticles into 1D, 2D and 3D superlattices has been observed on the carbon-coated copper grid by TEM without using any selective precipitation process.

BOPP微观等规度的研究

用13C-NMR(核磁共振)和DSC(差热分析)方法分析了燕山石化股份有限公司生产的BOPP均聚物,并对其微观等规度进行了研究,发现可以用外给电子体对BOPP的微观等规度进行调控,从而使BOPP树脂的拉膜质量显著提高,达到国外进口BOPP树脂的水平。

应用扫描电化学显微镜研究水/1,2-二氯乙烷界面上离子诱导的电子转移反应

应用扫描电化学显微镜和微电极技术研究了水 / 1,2 二氯乙烷界面上的反向电子转移反应 .分别以K4 Fe(CN) 6和 7,7,8,8 四氰代二甲基苯醌 (TCNQ)作为水相和有机相的电活性物质 ,通过选择合理的共同离子 (TPAs+与TBA+)来控制界面电位差 ,实现了这一在热力学上通常不可能实现的反向电子转移反应 .利用扫描电化学显微镜给出的正负反馈信息 ,研究了界面电位差驱动的液 /液界面上的电子转移反应 ,并进一步得到了在不同的共同离子浓度比时 ,此异相界面反应速率常数kf 为 1 3× 10 -31 8× 10 -2 cm/s(共同离子为TBA+)和 2 5× 10 -32 8× 10 -2 cm/s(共同离子为TPAs+) .验证了此反应速率常数kf 是由界面电位差所决定的 .在此实验条件下 ,此反应速率常数kf 与界面电位差的关系遵守Butler Volmer公式 .

Bond-charge calculation of nonlinear optical susceptibilities of LiXO3 type complex crystals

Second order nonlinear optical (NLO) tensor coefficients of LiXO3 (X = I, Nb, Ta) type crystals have been evaluated on the basis of the dielectric theory of complex crystals and the modified bond charge model. The current method is capable of calculating single bond contributions to the total second order NLO susceptibility. The tenser values thus calculated agree well with experimental data. By introducing the subformula equation and the concept of the effective charge of one valence electron, we are able to successfully treat such complex crystals as LiXO3 type compounds. In addition, the bond charge expression is modified to a more reasonable form for complex crystals. (C) 1998 Elsevier Science B.V.

同位素稀释-火花源质谱法分析大气飘尘中痕量元素

本文采用同位素稀释-相对灵敏度因子火花源质谱法分析了大气飘尘中24种痕量元素的含量,灵敏度可达10～10~(-4)μg/m~3,相对标准偏差为10～25%。

SYNTHESIS AND CRYSTAL-STRUCTURE OF K4H2[PMO9V3O40].10H2O

The crystal structure of the title compound was determined from single crystal X-ray diffraction at -90-degrees-C. The complex crystallizes in the tetragonal P4/mnc, Z = 2, a = 12.515(3), c = 17.636(7) angstrom. The structure was solved by Patterson and Fourier techniques and refined by least-squares to R = 0.061 for 788 reflections. The central PO4 is disordered, P-O = 1.54 angstrom, M(M = Mo or V) is 6-coordinate, M-O = 1.62-2.48 angstrom, K is 7-coordinate, K-O = 2.84-3.10 angstrom.