Gender equality in life insurance

[EN]This project is going to study the implications of the gender of an individual in the rate-setting process of life insurance. In order to do so there is a review of the continuous changes that have taken place in the national and European legislation following the enactment of the Directive 2004/113/EC, as well as its consequences from the prohibition to differentiate the premiums and benefits on the grounds of gender. In this area, the evolution of the Spanish insurance sector and the influence of the new legislation are examined. Furthermore, there is an analysis of the differences between men and women, which to some extent have a direct impact in the management and development of the life insurance companies. Finally, methods to calculate the premium and the benefits are proposed with the purpose of preventing the restrictions imposed by the Directive 2004/113/EC. In order to check the repercussions of the use of unisex tables a comparison is made between the premiums obtained for a whole life insurance by allocating the same weighing to the actuarial male and female mortality tables and those that would result if the distinction by gender were allowed.

Life Expectancy, Human Capital, Social Security and Growth

Revised: 2006-11.-- Published as an article in: Journal of Public Economics 90(12), December, 2006, pp. 2323-2349.

Life Expectancy, Schooling Time and Endogenous Growth

Published as an article in: Economic Inquiry, 2004, vol. 42, issue 4, pp. 602–617.

Changes in social inequalities in disability-free life expectancy in Southern Europe: the case of the Basque Country

Background: Health expectancy is a useful tool to monitor health inequalities. The evidence about the recent changes in social inequalities in healthy expectancy is relatively scarce and inconclusive, and most studies have focused on Anglo-Saxon and central or northern European countries. The objective of this study was to analyse the changes in socioeconomic inequalities in disability-free life expectancy in a Southern European population, the Basque Country, during the first decade of the 21st century. Methods: This was an ecological cross-sectional study of temporal trends on the Basque population in 1999-2003 and 2004-2008. All-cause mortality rate, life expectancy, prevalence of disability and disability free-life expectancy were calculated for each period according to the deprivation level of the area of residence. The slope index of inequality and the relative index of inequality were calculated to summarize and compare the inequalities in the two periods. Results: Disability free-life expectancy decreased as area deprivation increased both in men and in women. The difference between the most extreme groups in 2004-2008 was 6.7 years in men and 3.7 in women. Between 1999-2003 and 2004-2008, socioeconomic inequalities in life expectancy decreased, and inequalities in disability-free expectancy increased in men and decreased in women. Conclusions: This study found important socioeconomic inequalities in health expectancy in the Basque Country. These inequalities increased in men and decreased in women in the first decade of the 21st century, during which the Basque Country saw considerable economic growth.

Island life in the Cretaceous - faunal composition, biogeography, evolution, and extinction of land-living vertebrates on the Late Cretaceous European archipelago

The Late Cretaceous was a time of tremendous global change, as the final stages of the Age of Dinosaurs were shaped by climate and sea level fluctuations and witness to marked paleogeographic and faunal changes, before the end-Cretaceous bolide impact. The terrestrial fossil record of Late Cretaceous Europe is becoming increasingly better understood, based largely on intensive fieldwork over the past two decades, promising new insights into latest Cretaceous faunal evolution. We review the terrestrial Late Cretaceous record from Europe and discuss its importance for understanding the paleogeography, ecology, evolution, and extinction of land-dwelling vertebrates. We review the major Late Cretaceous faunas from Austria, Hungary, France, Spain, Portugal, and Romania, as well as more fragmentary records from elsewhere in Europe. We discuss the paleogeographic background and history of assembly of these faunas, and argue that they are comprised of an endemic 'core' supplemented with various immigration waves. These faunas lived on an island archipelago, and we describe how this insular setting led to ecological peculiarities such as low diversity, a preponderance of primitive taxa, and marked changes in morphology (particularly body size dwarfing). We conclude by discussing the importance of the European record in understanding the end-Cretaceous extinction and show that there is no clear evidence that dinosaurs or other groups were undergoing long-term declines in Europe prior to the bolide impact.

Economía de la salud, modalidades de evaluación económica

La salud es un aspecto muy importante en la vida de cualquier persona, de forma que, al ocurrir cualquier contingencia que merma el estado de salud de un individuo o grupo de personas, se debe valorar estrictamente y en detalle las distintas alternativas destinadas a combatir la enfermedad. Esto se debe a que, la calidad de vida de los pacientes variará dependiendo de la alternativa elegida. La calidad de vida relacionada con la salud (CVRS) se entiende como el valor asignado a la duración de la vida, modificado por la oportunidad social, la percepción, el estado funcional y la disminución provocadas por una enfermedad, accidente, tratamiento o política (Sacristán et al, 1995). Para determinar el valor numérico asignado a la CVRS, ante una intervención, debemos beber de la teoría económica aplicada a las evaluaciones sanitarias para nuevas intervenciones. Entre los métodos de evaluación económica sanitaria, el método coste-utilidad emplea como utilidad, los años de vida ajustado por calidad (AVAC), que consiste, por un lado, tener en cuenta la calidad de vida ante una intervención médica, y por otro lado, los años estimados a vivir tras la intervención. Para determinar la calidad de vida, se emplea técnicas como el Juego Estándar, la Equivalencia Temporal y la Escala de Categoría. Estas técnicas nos proporcionan un valor numérico entre 0 y 1, siendo 0 el peor estado y 1 el estado perfecto de salud. Al entrevistar a un paciente a cerca de la utilidad en términos de salud, puede haber riesgo o incertidumbre en la pregunta planteada. En tal caso, se aplica el Juego Estándar con el fin de determinar el valor numérico de la utilidad o calidad de vida del paciente ante un tratamiento dado. Para obtener este valor, al paciente se le plantean dos escenarios: en primer lugar, un estado de salud con probabilidad de morir y de sobrevivir, y en segundo lugar, un estado de certeza. La utilidad se determina modificando la probabilidad de morir hasta llegar a la probabilidad que muestra la indiferencia del individuo entre el estado de riesgo y el estado de certeza. De forma similar, tenemos la equivalencia temporal, cuya aplicación resulta más fácil que el juego estándar ya que valora en un eje de ordenadas y abscisas, el valor de la salud y el tiempo a cumplir en esa situación ante un tratamiento sanitario, de forma que, se llega al valor correspondiente a la calidad de vida variando el tiempo hasta que el individuo se muestre indiferente entre las dos alternativas. En último lugar, si lo que se espera del paciente es una lista de estados de salud preferidos ante un tratamiento, empleamos la Escala de Categoría, que consiste en una línea horizontal de 10 centímetros con puntuaciones desde 0 a 100. La persona entrevistada coloca la lista de estados de salud según el orden de preferencia en la escala que después es normalizado a un intervalo entre 0 y 1. Los años de vida ajustado por calidad se obtienen multiplicando el valor de la calidad de vida por los años de vida estimados que vivirá el paciente. Sin embargo, ninguno de estas metodologías mencionadas consideran el factor edad, siendo necesario la inclusión de esta variable. Además, los pacientes pueden responder de manera subjetiva, situación en la que se requiere la opinión de un experto que determine el nivel de discapacidad del aquejado. De esta forma, se introduce el concepto de años de vida ajustado por discapacidad (AVAD) tal que el parámetro de utilidad de los AVAC será el complementario del parámetro de discapacidad de los AVAD Q^i=1-D^i. A pesar de que este último incorpora parámetros de ponderación de edad que no se contemplan en los AVAC. Además, bajo la suposición Q=1-D, podemos determinar la calidad de vida del individuo antes del tratamiento. Una vez obtenido los AVAC ganados, procedemos a la valoración monetaria de éstos. Para ello, partimos de la suposición de que la intervención sanitaria permite al individuo volver a realizar las labores que venía realizando. De modo que valoramos los salarios probables con una temporalidad igual a los AVAC ganados, teniendo en cuenta la limitación que supone la aplicación de este enfoque. Finalmente, analizamos los beneficios derivados del tratamiento (masa salarial probable) si empleamos la tabla GRF-95 (población femenina) y GRM-95 (población masculina).

Occupational exposure to nano-TiO2 in the life cycle steps of new depollutant mortars used in construction

The present work is focused on the measurement of workers exposure to nano-TiO2 in the life cycle steps of depollutant mortars. It has been done in the framework of the SCAFFOLD project, which aims at the management of potential risks arising from the use of manufactured nanomaterials in construction. Main findings can be summarized as follows: (1) The occupational exposure to nano-TiO2 is below 0.3 mg/m(3) for all measured scenarios. The highest concentrations were measured during the cleaning task (in the nano-TiO2 manufacturing process) and during the application (spraying) of depollutant coatings on a wall. (2) It was found a high release of particles above the background in several tasks as expected due to the nature of the activities performed. The maximum concentration was measured during drilling and during adding powder materials (mean total particle concentration up to 5.591E+04 particles/cm(3) and 5.69E+04 particles/cm(3)). However, considering data on total particle concentration released, no striking differences have been observed when tasks have been performed using conventional materials in the sector (control) and when using materials doped with nano-objects.