Legitimaciones sociales de las políticas patrimoniales y museísticas

Cap. 1. Proyectos patrimoniales y museísticos en las sociedades democráticas y capitalistas: entre la legitimación formal y la vinculación social. Iñaki Arrieta Urtizberea. Cap. 2. Musées et patrimoine immatériel au Québec : enjeux politiques et sociaux. Laurier Turgeon. Cap. 3. “El patrimonio pertenece a todos”. De la universalidad a la identidad, ¿cuál es el lugar de la participación social? Victoria Quintero Morón. Cap. 4. La legitimación social y política de los museos: dos casos del estado de Oaxaca, México. Teresa Morales Lersch y Cuauhtémoc Camarena Ocampo. Cap. 5. Reinterpretaciones de la misión social de los museos: políticas de la cultura en la red de museos de Loures, Portugal. Marta Anico. Cap. 6. La comunicación de los museos y sus relaciones con las políticas culturales de las ciudades. Entre la repetición de estrategias y la innovación. Daniel Paül i Agustí. Cap. 7. El Patrimonio de la Guerra Civil como útil de concienciación social al amparo de la Ley de la Memoria Histórica. Óscar Navajas Corral y Julián González Fraile. Cap. 8. Política y planificación museística, y participación social en Cataluña: un breve recorrido histórico y algunas reflexiones. Daniel Solé i Lladós. Cap. 9. Diagnóstico de las acciones de los museos catalanes como parte de las políticas de integración. Fabien Van Geert. Cap. 10. Los inexistentes alcornocaleños y las experiencias museísticas etnográficas en el Parque Natural Los Alcornocales. Agustín Coca Pérez.

Luces y sombras en las Encuestas de Pobreza y Desigualdades Sociales desde el punto de vista del género

En estas páginas nos proponemos dos objetivos. El primero es analizar con detalle la metodología de medición de la pobreza de las Encuestas de Pobreza y Desigualdades Sociales (EPDS) que se realiza en la CAPV con el fin de desvelar sus principales carencias y potencialidades en cuanto a la incorporación de la perspectiva de género en el estudio de la pobreza. El segundo es estudiar, entre 1996 y 2004,la evolución de las situaciones de pobreza entre las mujeres y compararla con la evolución de la pobreza entre los hombres. En estos ocho años, el crecimiento económico ha sido muy importante, y ello se ha traducido en una reducción de la incidencia de la pobreza que no se ha dejado notar con la misma intensidad en todos los colectivos. Nos preguntamos si las mujeres, como colectivo que estaba peor situado, han conocido reducciones de las tasas de pobreza inferiores a las generales. Parece que la mejora de la coyuntura económica ha beneficiado a los que comparativamente estaban mejor.

Realidad y retos de la protección social en Euskadi

El nº 81 de Ecomiaz lleva el título de: Estado de bienestar y gobierno multinivel

Estructura y arquitectura de computadores : guía práctica para alumnos de primero y segundo curso de Grado en Ingeniería Informática de Gestión y Sistemas de Información

Grados recientes como el de Ingeniería Informática de Gestión y Sistemas de Información, y dada la orientación profesional que va a obtener el/la egresado/a para su incorporación en el mundo de la industria, requieren una revisión del enfoque de determinadas materias relativas a, por ejemplo, cómo está estructurado un computador, qué elementos lo conforman, cómo interactúan, etc.; dando al alumnado una visión amplia sin buscar la exhaustividad (propia de otras titulaciones) pero manteniendo un rigor tanto técnico como científico según la materia tratada.

Museos, redes sociales y tecnología 2.0

Índice: - Sobre museos, redes sociales y tecnología 2.0 (Alex Ibáñez Etxeberria). - Sitios web y museos: nuevas aplicaciones para el aprendizaje informal (Mikel Asensio, Elena Asenjo y Alex Ibáñez Etxeberria). - From headphones to microphones: mobile social media in the museum as distributed network (Nancy Proctor). - Mobile learning y patrimionio: aprendiendo historia con mi teléfono, mi GPS y mi PDA (Alex Ibáñez Etxeberria, Mikel Asensio y José Miguel Correa). - Digital asset management strategies for multi-platform content delivery (Titus Bicknell). - Redes sociales y museos participativos: la irrupción de las tecnologías 2.0 en la sociedad y su aplicación en los museos a través del caso de Arazi (Juan José Aranburu).

Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

Modelado de sistemas concurrentes con OMNeT++

El objetivo del siguiente proyecto es proporcionar una herramienta para estudiar el rendimiento de sistemas multiprocesador. Para ello estos sistemas serán previamente modelados como redes de Petri y simulados mediante el entorno de simulación de sistemas de eventos discretos OMNeT++.

O iusinterativismo e a decisâo judicial iusinterativa para justiça-nas-decisôes: uma abordagem sistêmica

599 p.

Sistemas SCR y NSR-SCR para DeNOx en corrientes de escape diésel: Formulaciones, cinética y modelización

314 p.

Agua, poder y sociedad en el mundo urbano alavés bajomedieval y moderno

561 p.

Las relaciones de género en los centros sociales okupados de Bilbao

Gaztetxeetan nesken eta mutilen arteko harremanak nolakoak diren eta zelako ekintzak ematen diren ikus-lehioa izango da ikerketa. Askotan teoria eta praktika ez datoz bat. Beraz gaztetxeek antolamendu horizontala dute, antitaurinoak, antisexistak… dira baina gero eguneroko funtzionamenduan heziketak inposatutako hainbat rol sexistak errepikatzen dira. Eta nahiz eta errealitatea aldatzen ari den gaztetxeetan edo asanbladetan gai hauek ateratzea oso zaila da. Gehienetan arazoa ez delako identifikatzen. Horregatik, hausnarketa bultzatzea eta aldaketak eragitea du helburu ikerlanak.

Cosificación de las adolescentes en las redes sociales digitales

La cosificación se refiere a la representación de una mujer a través de su cuerpo o partes de éste. La utilización masiva por parte de adolescentes de las Redes Sociales Digitales, hacen de éste fenómeno una forma tangible de discriminación sexista. Este estudio, tiene como objetivo analizar la cosificación de las adolescentes en las redes sociales y su influencia en la autoestima de cada joven. Para ello, se han aplicado diferentes escalas a 1087 adolescentes de 11 centros educativos de Guipúzcoa. Los resultados muestran diferencias de género en la utilidad de redes sociales digitales y en los niveles de cosificación. En concreto, los adolescentes utilizan más las redes sociales digitales para el ocio, mientras ellas las utilizan para relacionarse con su entorno, por lo que están más expuestas a opiniones externas. Además, se ha observado un patrón de conducta cosificadora entre las adolescentes, mientras que ellos muestran mayores niveles de sexismo.

La integración de los sistemas de gestión normalizados: estudio de caso .

[ES]Actualmente en las empresas a la preocupación por los resultados económicos se le debe sumar la preocupación por la consecución de resultados que permitan satisfacer las expectativas y necesidades de los grupos de interés o “stakeholders”. Una de las herramientas que las organizaciones emplean para ello es la utilización de los estándares de sistemas de gestión, tales como las normas ISO 9001:2008, ISO 14001:2004 y OHSAS 18001:2007. Recientemente numerosas empresas están optando por la integración de dichos sistemas con el objetivo de crear sinergias: reducir costes, eliminar duplicidades etc. En este trabajo, en primer lugar, se analizarán los diferentes modos de implantación, las motivaciones por las cuales las empresas se inclinan por la integración y las principales ventajas y dificultades de llevar a cabo tal proceso. En segundo lugar, se presentará y analizará el caso concreto de la empresa Gamesa, desde su decisión de integrar los sistemas de gestión hasta los resultados obtenidos.

La integración de los sistemas de gestión normalizados: un análisis de los principales estudios empíricos.

[ES]En la actualidad, muchas empresas organizan sus sistemas de gestión basándose en las normas y estándares internacionales (ISO 9000, ISO 14000, OHSAS 18000…). Considerando que todos ellos están soportados en unos principios comunes, las organizaciones tratan de aprovechar las sinergias existentes entre dichos sistemas buscando la mayor integración posible y la obtención de beneficios, tales como el ahorro de costes, la disminución de la burocracia o la mejora de la eficiencia. Por ello, el objetivo del presente trabajo es aportar una serie de recomendaciones que permitan a las empresas orientar la integración de sus sistemas de gestión de una manera sencilla y ágil.