Contribution of Resource-Based View and Entrepreneurial Orientation on Small Firm Growth

[EN] This research provides a useful framework for identifying a small firms’ propensity to engage in entrepreneurial orientation. We examine the impact of the Entrepreneurial Orientation (EO) as a main resource and capability on small firm’ growth. The growth seems to come out as an important demonstration of the entrepreneurial orientation of small firms (Davidsson, 1989; Green and Brown, 1997; Janney and Gregory, 2006). Thus, this research builds on prior conceptual research that suggests a positive integration between entrepreneurial orientation and resource-based view. In the first instance, the research will focus on reviewing literature in the emerging area of entrepreneurial orientation as it applies to growth oriented small firms and resource-based view of the firm. Secondly, an empirical study was developed based on a stratified sample of small firms of manufacturing industry. Data were submitted to a multivariate statistical analysis and a linear regression model was performed in order to predict the influence of the resources and capabilities on small firms’ growth. In this sense, we consider the construct growth as a dependent variable and the ones relates with resources and capabilities (entrepreneur resources, firm resources, networks and EO) as independent variables. The research results suggest a set of resources and capabilities that promote the growth of the small firms. Also, the EO seems to have a predictive value on growth. Explaining variables related with resources and capabilities and EO were identified as essential in growth oriented small firms. It was still possible to conclude that the entrepreneurial firms which grew seem to have resources and develop more capabilities and take advantage in the search for those competences. This attitude reflects on the EO of the firm. This study has important implication for both researchers and practitioners. It highlights the necessity of firms to develop superior EO of all their members and also to invest on better resources and consequently superior capabilities as a way of reaching higher levels of growth. While previous authors have attempted to analyse certain aspects of this process (linkage between entrepreneurial orientation and growth), this research developed a framework that combines these and others factors (resource-based view) pertinent to growth oriented small firms. The results support the necessity to identify explicative variables of multiple levels to explain the growth of small firms. The adoption of an entrepreneurial orientation as an indispensable variable to the growth oriented small firms seems pertinent.

Análisis del mercado del rating de las emisiones de titulación en España (1993-2011)

[ES] La calificación crediticia externa es un elemento clave para el buen fin de las operaciones de titulización. No obstante, las agencias de calificación han sido objeto de una intensa controversia, cuestionándose su fiabilidad y objetividad. En este trabajo abundamos en esta cuestión, analizando la distribución de los ratings otorgados a las emisiones de bonos de titulización llevadas a cabo en España (1993-2011), uno de los países más activos en cuanto al volumen de emisiones, llegaron a ocupar el segundo puesto a nivel europeo y el tercero a nivel mundial. Aportamos evidencia sobre ciertas anomalías entre las que cabe destacar la estructura oligopolística del mercado del rating, la fragilidad desde una perspectiva histórica de las calificaciones otorgadas, y la existencia de patrones no homogéneos en la elección de la agencia de calificación, tanto si se tiene en cuenta la sociedad gestora, como el colateral de respaldo.

The basque ecological debt: global socioecological impacts of a small open economy

4 p.

Breaking the 400 ppm barrier: Physical and Social implications of the recent CO2 rise

6 p.

Rompiendo la barrera de las 400 ppm: implicaciones físicas y sociales del reciente aumento de CO2

6 p.

400 ppm-ko langa hautsi da: CO2-kontzentrazioaren igoeraren ondorio fisiko eta sozialak

6 p.

“Steer-by-wire” software garapena

[EU]Proiektu honek automobilen antzinako direkzio sistemak ordezkatuko dituen steer-by-wire-ren inplementazioa deskribatuko du, software-aren garapena, hain zuzen. Lan hau garatzeko, ezinbestekoa izango da orain arte egindako lanen bilketa eta azterketa egitea, baita nolako zailtasunak, arriskuak egongo diren eta posiblea izango litzatekeen etorkizun batean teknologia hau instalatzea. Programazio, mekanika eta automatika ezagutzaren bidez teknologia berri hau ordenagailu batean simulatuko da eta orain arte erabili izan diren teknologiekin alderatuko dira, ateratako emaitzekin ondorio nabarmenak ezarriz. Programazio eta simulaziorako “Labview” eta “Matlab-Simulink” software-ak erabiliko dira, beharrezkoak diren tresnen ezagutzak aurretik lortuz.

Proyecto técnico-económico para la rehabilitación energética de edificios

[ES]El proyecto consiste en analizar un edificio cualquiera, situado en la zona norte de la península, que necesita una rehabilitación energética. Se estudian todos los posibles elementos por los que hay mayores pérdidas de energía: ventanas, fachada, tejado, iluminación y caldera. A continuación, se desarrollan unas propuestas de mejora para reducir estas pérdidas y se realiza el presupuesto de la inversión que debe hacer el cliente, así como la rentabilidad del proyecto. Una vez terminado el estudio, se llevarían a cabo las obras, logrando un edificio eficiente y rentable energéticamente.

Balance de la política fiscal desarrollada en España en época de crisis. ¿Por qué elegir el camino contractivo?

The use of a contractive fiscal policy in times of crisis and austerity can lead to so many different opinion streams which can be, at the same time, very opposite with each other. The high budget deficit in some economies has forced the eurozone to implement austerity policies, meaning that the debate is now more alive than ever. Therefore, the aim of this paper is to analyze the effects of the implementation of a contractive policy during a crisis considering the case of Spain. The positive effects in financial markets were noticed due to the decrease of the risk premium and the payment of interests, and also thanks to the increase of trust towards Spain. This way, the reduction of the Spanish deficit was remarkable but in any case there is still a long path until reaching the limit of 3% of the GDP. Also, in the short run it is possible to see that the consolidation had contractive effects in the economic activity but, in the long run, the debate is among the defenders of the fact that austerity is followed by a growing period and the ones opposing to it due to the drowning effect produced by it.

Infraestructuras verdes : análisis de la práctica de los anillos verdes

En los últimos años, alcanzar la Economía Verde parece ser la aspiración perseguida por la sociedad, dado que representa un paso decisivo para lograr el Desarrollo Sostenible y con ello una ciudad sostenible. Sin embargo, las ciudades de todo el mundo han experimentado cambios en su fisonomía debido a los continuos procesos de urbanización que han fomentado un crecimiento desmedido de las mismas, además de generar una serie de efectos negativos que las alejan del camino hacia la sostenibilidad. De tal manera, que a medida que dicho crecimiento aumenta, cada vez son menores las áreas verdes localizadas en las periferias de las ciudades. Para responder a estos problemas asociados al crecimiento urbano y, por ende, al consumo de tierra, se han diseñado diversos instrumentos entre los que destaca la práctica de los Anillos Verdes, siendo el estudio de dicha práctica el objetivo de este trabajo. Con el fin de tener una amplia visión de la implementación de la práctica de los Anillos Verdes, en primer lugar, se describen de manera general algunos casos a nivel internacional, para, a continuación, profundizar en algunas de las principales prácticas europeas y españolas, confirmando, de este modo, que representan una práctica muy extendida en Europa, mientras que en España todavía se encuentran en un estado emergente.

Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

La utilización del acero inoxidable en estructuras de hormigón armado en edificación.

[ES]El hormigón, y más concretamente las armaduras de hormigón, son usadas a diario en múltiples lugares. Estas armaduras son utilizadas en diversas estructuras, de las cuales se espera una duración relativamente larga; aún así, en ciertos ambientes, ciertos agentes, tales como el dióxido de carbono o los cloruros, consiguen atravesar el hormigón alcanzando las armaduras y reducir el pH del hormigón hasta el punto que el acero del interior queda despasivado. A partir de aquí, y debido mayormente al oxígeno, el acero se corroe, reduciendo drásticamente la vida de dichas armaduras y, por tanto, de las estructuras. Debido a esto, la utilización de armaduras de acero inoxidable, en lugar de las típicas de acero al carbono, está cobrando fuerza, a pesar de su mayor coste inicial. Su mayor resistencia a la corrosión en ambientes agresivos convierte al acero inoxidable en una opción a tener en cuenta para prolongar la vida de las estructuras que se encuentran en estos ambientes. En este trabajo se han comparado ambos tipos de aceros, en dos tipos de secciones diferentes, resaltando las ventajas e inconvenientes de cada uno de ellos, mayormente centrándose en la resistencia y el coste que tiene cada uno de ellos. Los resultados demuestran que el acero inoxidable supone una ventaja considerable en algunos ámbitos de uso, a pesar de que en otros el acero al carbono siga siendo más viable. A pesar de esto, queda claro que la evolución ascendente del uso de armaduras de acero inoxidable está de sobra justificada.

Gogortasunaren estimazioa Barkhausen metodoaz.

[EU]Gradu amaierako lan hau merkatuan dauden kalitate kontroleko azterketa mota batzuen azterketan oinarritzen da, batez ere materialaren gainazaleko gogortasunaren azterketan metodo berri baten erabilpenaz. Metodo berri hau, metodo ez suntsikorra da eta Barkhausen soinuan oinarritzen da non gogortasunaren estimazio hurbildu bat egitea lortu nahi den. Lan honetan metodo berri honen inplantazioaren onurak eta berau zertan datzan azaltzen da etorkizunean materialaren gainazaleko gogortasunaren neurketan erabili ahal izateko enpresen onurarako kanlitateko kontroleko sailean.

Analisis de la dirección estratégica de los Recursos Humanos en una burocracia profesional. Escuela de Musica Andres Isasi.

[ES] En las últimas décadas la importancia de los Recursos Humanos en las empresas se ha ido incrementando, llegado al punto que si se dan las condiciones, hasta la Dirección de Recursos Humanos se puede considerar Estratégica. Esto permite a las empresas mediante una Dirección adecuada generar ventaja competitiva sostenible a través de las personas. Hay que añadir el punto de interés que supone una burocracia profesional, donde las características diferentes de los profesionales influyen en la Dirección de Recursos Humanos. Mediante un adecuado análisis, tanto externo como interno, desde la perspectiva de los Recursos Humanos, se podrán plantear objetivos y estrategias acordes con la organización de estudio, la Escuela de Música Andrés Isasi, que le permitirán mejorar en esta área.

The patents in the introduction of reinforced concrete in Spain: "Alhondiga de Bilbao" case study

Reinforced concrete structures are introduced in Spain mainly by French influence. This happens in the late nineteenth century, following the scheme operating through proprietary systems prevailing in Europe. Systems initially have poor scientific support reaching, even early twentieth century, an impediment to the development of concrete structures, due to the lack of knowledge shown, as well as due to a series of accidents. Therefore, from the end of the first decade of the past century are enacted a series of regulations in many countries, that will change the design and calculation of reinforced concrete structure. The knowledge of the environment of the patent systems, its beginnings and the circumstances of their application allow us to understand the constraints of the early concrete structures, as presented in the Bilbao wine store (1906).