Standardization of setting temperature and time for fish meat

Meat to water ratio used for washing was 1:3 for oil sardine and mackerel; but for pink perch and croaker, it was 1:2. Again the washing process was repeated three times for oil sardine and mackerel; but two times for pink perch and croaker. The washed meat was mixed with 2.5% NaC1 and set at +5°C and +40°C for 1, 2 and 3hrs. The gel strength and expressible water content was measured. Basing on this study, setting temperature at +40°C was selected and with respect to time 1hr for sardine and mackerel and 3hrs for pink perch and croaker was selected.

Analysis of variance and standardization of longline hook rates of bigeye (Thunnus obesus) and yellowfin (Thunnus albacares) tunas in the Eastern Pacific Ocean during 1975-1987

ENGLISH: Longline hook rates of bigeye and yellowfin tunas in the eastern Pacific Ocean were standardized by maximum depth of fishing, area, and season, using generalized linear models (GLM's). The annual trends of the standardized hook rates differ from the unstandardized, and are more likely to represent the changes in abundance of tunas in the age groups most vulnerable to longliners in the fishing grounds. For both species all of the interactions in the GLM's involving years, depths of fishing, areas, and seasons were significant. This means that the annual trends in hook rates depend on which depths, areas, and seasons are being considered. The overall average hook rates for each were estimated by weighting each 5-degree quadrangle equally and each season by the number of months in it. Since the annual trends in hook rates for each fishing depth category are roughly the same for bigeye, total average annual hook rate estimates are possible with the GLM. For yellowfin, the situation is less clear because of a preponderance of empty cells in the model. The full models explained 55% of the variation in bigeye hook rate and 33% of that of yellowfin. SPANISH: Se estandardizaron las tasas de captura con palangre de atunes patudo y aleta amarilla en el Océano Pacífico oriental por la profunidad máxima de pesca, área, y temporada, usando modelos lineales generalizados (MLG). Las tendencias anuales de las tasas de captura estandardizadas son diferentes a las de las tasas no estandardizadas, y es más que representen los cambios en la abundancia de los atunes en los grupos de edad más vulnerables a los palangreros en las áreas de pesca. Para ambas especies fueron significativas todas las interacciones en los MLG con año, profundidad de pesca, área, y temporada. Esto significa que las tendencias anuales de las tasas de captura dependen de cuál profundidad, área, y temporado se está considerando. Para la estimación de la tasa de captura general media para cada especie se ponderó cada cuadrángulo de 5 grados igualmente y cada temporada por el número de meses que contiene. Ya que las tendencias anuales en las tasas de captura para cada categoría de profundidad de pesca son aproximadamente iguales para el patudo, son posibles estimaciones de la tasa de captura anual media total con el MLG. En el caso del aleta amarilla, la situación es más confusa, debido a una preponderancia de celdas vacías en el modelo. Los modelos completos explican el 55% de la variación de la tasa de captura de patudo y 33% de la del aleta amarilla. (PDF contains 19 pages.)

Standardization of polyphosphate treatment for tiny prawns (Parapenaeopsis stylifera) with special reference to its rehydration capacity and organoleptic quality

In the present study, an attempt was made to explore the benefits of polyphosphate for enhancement of dried prawn (Parapenaeopsis stylifera) quality commercially known as "sode" in Maharashtra coast. Dip treatment in polyphosphate solution at different concentrations (viz., 3, 5, 7 and 10%) was given to pealed and no deveined P. stylifera for different durations (viz., 1, 2, 3, 4 and 5 min). Treated prawns were dried and subjected to rehydration capacity test and organoleptic evaluation. Among the different treatments, rehydration capacity was found to increase with the increased duration and concentration of treatment. Tiny prawns treated with sodium tripolyphosphate solution at the rate of 5% concentration for 5 minutes showed an increase in pH from acidic to alkaline, and had better quality with respect to rehydration capacity and textural attributes as compared to other concentrations and durations of polyphosphate treatment.

A survey of process hygiene in the Sri Lankan prawn industry. 1. Hygiene status of raw materials and products

A survey of processing hygiene in the Sri Lankan prawn industry has shown that the incoming raw material has extremely high bacterial loadings; about 50% of samples analysed had a total count in excess of 10,000,000/g. Although beheading reduces the count, ineffective temperature control during processing means that the final total count of raw, shell-on, P.U.D. and P.A.D. prawns, as well as cooked prawns, is in excess of 1,000,000/g. - the maximum level specified by many importing countries.

A survey of process hygiene in the Sri Lankan prawn industry. 2. The hygiene status of personnel

Of 262 personnel tested, 137 (52%) were found to be positive for Staphylococcus aureus. Among individual companies the prevalence of S. aureus ranged from 92% (Company No. 1) to 22% (Company No. 2). Although five companies provided a sanitiser hand-dip, this was found to be ineffective for the control of S. aureus. Provision of hand-washing facilities, of protective clothing and of toilet facilities was found to be inadequate for an export food industry.

A survey of process hygiene in the Sri Lankan prawn industry. 3. Critical control points

Of fifteen processing plants surveyed in Sri Lanka, only five were found to have a prawn process which was adequately controlled. Most common process faults were: inadequate chilling of prawns after a wash in 30°C, mains water, the use of large blocks of ice to cool prawns, and high ratios of prawns to ice. There was also ample scope for cross-contamination of the processed prawns.

MDNR-NOAA trawl standardization study

Long-term living resource monitoring programs are commonly conducted globally to evaluate trends and impacts of environmental change and management actions. For example, the Woods Hole bottom trawl survey has been conducted since 1963 providing critical information on the biology and distribution of finfish and shellfish in the North Atlantic (Despres-Patango et al. 1988). Similarly in the Chesapeake Bay, the Maryland Department of Natural Resources (MDNR) Summer Blue Crab Trawl survey has been conducted continuously since 1977 providing management-relevant information on the abundance of this important commercial and recreational species. A key component of monitoring program design is standardization of methods over time to allow for a continuous, unbiased data set. However, complete standardization is not always possible where multiple vessels, captains, and crews are required to cover large geographic areas (Tyson et al. 2006). Of equal issue is technological advancement of gear which serves to increase capture efficiency or ease of use. Thus, to maintain consistency and facilitate interpretation of reported data in long-term datasets, it is imperative to understand and quantify the impacts of changes in gear and vessels on catch per unit of effort (CPUE). While vessel changes are inevitable due to ageing fleets and other factors, gear changes often reflect a decision to exploit technological advances. A prime example of this is the otter trawl, a common tool for fisheries monitoring and research worldwide. Historically, trawl nets were constructed of natural materials such as cotton and linen. However modern net construction consists of synthetic materials such as polyamide, polyester, polyethylene, and polypropylene (Nielson et. al. 1983). Over the past several decades, polyamide materials which will be referred to as nylon, has been a standard material used in otter trawl construction. These trawls are typically dipped into a latex coating for increased abrasion resistance, a process that is referred to as “green dipped.” More recently, polyethylene netting has become popular among living resource monitoring agencies. Polyethylene netting, commonly known as sapphire netting, consists of braided filaments that form a very durable material more resistant to abrasion than nylon. Additionally, sapphire netting allows for stronger knot strength during construction of the net further increasing the net’s durability and longevity. Also, sapphire absorbs less water with a specific gravity near 0.91 allowing the material to float as compared to nylon with specific gravity of 1.14 (Nielson et. al. 1983). This same property results in a light weight net which is more efficient in deployment, retrieval and fishing of the net, particularly when towing from small vessels. While there are many advantages to the sapphire netting, no comparative efficiency data is available for these two trawl net types. Traditional nylon netting has been used consistently for decades by the MDDNR to generate long term living resource data sets of great value. However, there is much interest in switching to the advanced materials. In addition, recent collaborative efforts between MDNR and NOAA’s Cooperative Oxford Laboratory (NOAA-COL) require using different vessels for trawling in support of joint projects. In order to continue collaborative programs, or change to more innovative netting materials, the influence of these changes must be demonstrated to be negligible or correction factors determined. Thus, the objective of this study was to examine the influence of trawl net type, vessel type, and their interaction on capture efficiency.

An objective method to monitor and quantify texture of salted herring during ripening in barrels at 4°C

Changes in the texture (elastic nature) of the flesh of barrel salted herring during the ripening process at 4°C have been monitored. The method employs the analysis of stress-relaxation curves after compression to half of the sample thickness on an lnstron Model 1112. The parameter 'T/P' for each sample represents the reciprocal of the gradient of a line connecting P and T0.368p. This parameter characteristic of each sample's texture was calculated as the ratio of 'T/P' where, T is the relaxation time and is defined as the time required for a stress at constant strain to decrease to 1/e of its original value, where 'e' is the base of natural logarithms (2.7183). Since 1/e=0.368, the relaxation time is the time required for the force to decay to 36.8% of its original value. P is the peak height of the curve (i.e. the force value at the maximum height). This method was adopted from the bakery industry for testing the degree of gluten development in bread dough. The 'T/P' values obtained over the course of ripening for differently treated salted-herring in barrels ranged between 1 and 12. The trends in 'T/P' value, during ripening period for the different samples, appeared to be parallel changes in texture perceived by sensory observation (subjective measurement), although the heterogeneous nature of the samples gave standard deviations, about the replicate sample mean, around 5%. The method appears promising as an objective measure for monitoring this aspect of the textural quality of barrel salted-herring through ripening if reproducibility of test results can be improved by more careful standardization of sample preparation and test protocol.

Integrated Sensor Systems for Vessels of Opportunity, National Oceanographic Centre, Southampton, UK, October 10-12,2006 : workshop proceedings

The use of self-contained, low-maintenance sensor systems installed on commercial vessels is becoming an important monitoring and scientific tool in many regions around the world. These systems integrate data from meteorological and water quality sensors with GPS data into a data stream that is automatically transferred from ship to shore. To begin linking some of this developing expertise, the Alliance for Coastal Technologies (ACT) and the European Coastal and Ocean Observing Technology (ECOOT) organized a workshop on this topic in Southampton, United Kingdom, October 10-12, 2006. The participants included technology users, technology developers, and shipping representatives. They collaborated to identify sensors currently employed on integrated systems, users of this data, limitations associated with these systems, and ways to overcome these limitations. The group also identified additional technologies that could be employed on future systems and examined whether standard architectures and data protocols for integrated systems should be established. Participants at the workshop defined 17 different parameters currently being measured by integrated systems. They identified that diverse user groups utilize information from these systems from resource management agencies, such as the Environmental Protection Agency (EPA), to local tourism groups and educational organizations. Among the limitations identified were instrument compatibility and interoperability, data quality control and quality assurance, and sensor calibration andlor maintenance frequency. Standardization of these integrated systems was viewed to be both advantageous and disadvantageous; while participants believed that standardization could be beneficial on many levels, they also felt that users may be hesitant to purchase a suite of instruments from a single manufacturer; and that a "plug and play" system including sensors from multiple manufactures may be difficult to achieve. A priority recommendation and conclusion for the general integrated sensor system community was to provide vessel operators with real-time access to relevant data (e.g., ambient temperature and salinity to increase efficiency of water treatment systems and meteorological data for increased vessel safety and operating efficiency) for broader system value. Simplified data displays are also required for education and public outreach/awareness. Other key recommendations were to encourage the use of integrated sensor packages within observing systems such as 100s and EuroGOOS, identify additional customers of sensor system data, and publish results of previous work in peer-reviewed journals to increase agency and scientific awareness and confidence in the technology. Priority recommendations and conclusions for ACT entailed highlighting the value of integrated sensor systems for vessels of opportunity through articles in the popular press, and marine science. [PDF contains 28 pages]

Turbidity and the suspended sediment load of the regulated River Tees

The physical effects of river regulation in the U.K. by impoundments have attracted most attention from hydrologists and engineers concerned with predicting and maintaining discharge regimes for water supply. Grimshaw & Lewin (1980) suggested two basic methods to investigate the effects of regulation on suspended sediment discharge: (i) Compare the river load before and after reservoir construction, and (ii) adopt a paired catchment approach. The former method assumes stationarity of process in the natural system. The latter method, involving selecting two adjacent catchments of similar physical attributes, one regulated and one unregulated, assumes constancy of process spatially. In this report both approaches are adopted to examine the turbidity and suspended sediment concentration regime of the regulated River Tees. Neither approach was entirely satisfactory in the present case. This report examines the discharge and turbidity record consisting of approximately 4000 paired data points, representative of an 11-year post-impoundment period, that has been examined for the River Tees at Broken Scar, Darlington. A small amount of suspended sediment concentration data was also processed: these data are representative of both the pre-impoundment and post-impoundment sediment regime.

Species-specific effects of four preservative treatments on oocytes and ovarian material of Atlantic cod (Gadus morhua), haddock (Melanogrammus aeglefinus), and American plaice (Hippoglossoides platessoides)

The lack of information concerning the preservation of ovarian material of fish species inhibits standardization of methods for determining fecundity and measuring oocytes. The effects of four preservatives (10% phosphate-buffered formalin, modified Gilson’s solution, 70% ethanol, and freezing) on ovarian material weight and oocyte size were quantified for prespawning Atlantic cod (Gadus morhua), haddock (Melanogrammus aeglefinus), and American plaice (Hippoglossoides platessoides). Effects of preservation were similar between Atlantic cod and haddock but different between Atlantic cod and American plaice for nearly all comparisons. Although all treatments affected the weight of ovarian material, freezing caused the most change and formalin caused the least. Such signif icant species-specific effects should be quantified in the calculation of life history characteristics, such as fecundity, to minimize error. This is one of few studies dedicated to evaluating the effects of preservation on oocytes and ovarian material and is the first to evaluate multiple preservatives on species.

An atlas of reproductive development in rockfishes, genus Sebastes

The genus Sebastes consists of over 100 fish species, all of which are viviparous and long-lived. Previous studies have presented schemes on the reproductive biology of a single targeted species of the genus Sebastes, but all appear to possess a similar reproductive biology as evidenced by this and other studies. This atlas stages major events during spermatogenesis, oogenesis, and embryogenesis, including atresia, in six species of Sebastes (S. alutus, S. elongatus, S. helvomaculatus, S. polyspinis, S. proriger, and S. zacentrus). Our study suggests that the male reproductive cycle of Sebastes is characterized by 11 phases of testicular development, with 10 stages of sperm development and 1 stage of spermatozoa atresia. Ovarian development was divided into 12 phases, with 10 stages of oocyte development, 1 stage of embryonic development, and 1 stage of oocyte atresia. Embryonic development up to parturition was divided into 33 stages following the research of Yamada and Kusakari (1991). Reproductive development of all six species examined followed the developmental classifications listed above which may apply to all species of Sebastes regardless of the number of broods produced annually. Multiple brooders vary in that not all ova are fertilized and progress to embryos; a proportion of ova are arrested at the pre-vitellogenic stage. Reproductive stage examples shown in this atlas use S. elongates for spermatic development, S. proriger for oocyte development, and S. alutus for embryological development, because opportunistic sampling only permitted complete analysis of each respective developmental phase for those species. The results of this study and the proposed reproductive phases complement the recommended scheme submitted by Brown-Peterson et al. (2011), who call for a standardization of terminology for describing reproductive development of fishes.

Internationaler BMB/ICES-Workshop "Fischkankheiten und Parasiten in der Ostsee"

From 25 November until 8 Deeember 1994, a sea-going workshop with the above title was carried out on board RV "Walther Herwig IlI" under the umbrella of the Baltie Marine Biologists (BMlJ) and the International Council for the Exploration of the Sea (ICES). Under the co-convenorship of the first two authors of this paper, 11 seientists from 8 of the 9 countries bordering the Baltic Sea (except Sweden) actively involved in research monitoring into fish diseases/parasites participated. The main reason for holding the workshop was that, although fish disease monitoring programmes on the abundance and spatial distribution of fish diseases/parasites are being carried out by some of the countries bordering the Baltic Sea, there is still a striking lack of seientific information as compared to other seas, such as the North Sea. Moreover, since new fish disease monitoring programmes have recently been started (mainly by the new Baltic republics Latvia and Estonia, which recently became ICES-member countries) or are planned for the near future (Lithuania), BMB as weil as ICES felt the need for a interealibration and standardization of methodologies applied during fish disease/parasite surveys for the specific conditions in the Baltic Sea. Therefore, the major objectives of the workshop were -to obtain information about the disease/parasite prevalence in Baltic (Platichthys flesus) and other abundant fish species along a transect from the western (Mecklenhurg Bight) to the eastern (Gulf of Finland) Baltic Sea to be used as a baseline for future studies, -to intercalibrate methodologies applied for sampling, diagnosis of diseases/parasites, reporting and analyses of disease data, -if necessary, to recommend standard methodologies to be used for fish disease/parasite monitoring programmes under the specific conditions in the Baltic Sea. Although the data have yet not been completely analyzed, there is indication for some pronounced spatial trends regarding the prevalence of certain diseases/parasites, mainly for Iymphocystis and skin ulcerations in flounder but also for diseases and parasites of cod (Gadus morhua) which can be seen in figures 2 and 4. Recommendations for standard methodologies will later be published elsewhere.

Pen fish culture in reservoirs: an alternative to land based nurseries

An experiment to rear carp seed was conducted in Tamil Nadu, India during October 2001 to April 2002 as a part of an ambitious programme aimed at standardization of pen fish rearing technology for production of stocking material of desired size at a lower cost. The experiment used six pens erected using locally available materials in the exposed marginal area of an existing reservoir. The high survival rate of carps (67.2-94.7%) and reasonable returns on investment (26.2%) obtained in the experiment indicated that fish seed rearing in pens erected in suitable areas of existing reservoirs could serve as a cheaper alternative to the expensive land-based nursery ponds.

Monoclonal antibodies in fish and shellfish health management in India

The paper describes the superiority of monoclonal antibodies (MAb) over conventional polyclonal antisera. Studies undertaken indicate that Aeromonas hydrophila isolates are highly heterogenous and variation exists even between isolates from a farm, requiring a large number of MAbs for classification and use of information in vaccine development. However, some of the MAbs could be used for detection of homologous isolates in fish kidney by immunodot assay and evaluation and standardization of biofilm of A. hydrophila for oral vaccination in carps.