Exploring three approaches to offer distance learning courses through a social network of health researchers in three African countries

The Institute of Tropical Medicine in Antwerp hereby presents the results of two pilot distance learning training programmes, developed under the umbrella of the AFRICA BUILD project (FP7). The two courses focused on evidence-based medicine (EBM): with the aim of enhancing research and education, via novel approaches and to identify research needs emanating from the field. These pilot experiences, which were run both in English-speaking (Ghana), and French-speaking (Mali and Cameroon) partner institutions, produced targeted courses for the strengthening of research methodology and policy. The courses and related study materials are in the public domain and available through the AFRICA BUILD Portal (http://www.africabuild.eu/taxonomy/term/37); the training modules were delivered live via Dudal webcasts. This paper assesses the success and difficulties of transferring EBM skills with these two specific training programmes, offered through three different approaches: fully online facultative courses, fully online tutor supported courses or through a blended approach with both online and face-to-face sessions. Key factors affecting the selection of participants, the accessibility of the courses, how the learning resources are offered, and how interactive online communities are formed, are evaluated and discussed.

Handy or practical student. Objective: to pass or to learn

With the introduction of the European Higher Education Area and the development of the "Bologna" method in learning certain technological subjects, a pilot assessment procedure was launched in the "old" plan to observe, monitor and analyze the acquiring knowledge of senior students in various academic courses. This paper is a reflection on culture and knowledge. Will students accommodate to get a lower score on tests because they know they have a lot of tooltips to achieve their objectives?. Are their skills lower for these reason?.

MIRACLE Approaches to Multilingual Information Retrieval: A Baseline for Future Research

This paper describes the first set of experiments defined by the MIRACLE (Multilingual Information RetrievAl for the CLEf campaign) research group for some of the cross language tasks defined by CLEF. These experiments combine different basic techniques, linguistic-oriented and statistic-oriented, to be applied to the indexing and retrieval processes.

Combining statistical and semantic approaches to the translation of ontologies and taxonomies

Ontologies and taxonomies are widely used to organize concepts providing the basis for activities such as indexing, and as background knowledge for NLP tasks. As such, translation of these resources would prove useful to adapt these systems to new languages. However, we show that the nature of these resources is significantly different from the "free-text" paradigm used to train most statistical machine translation systems. In particular, we see significant differences in the linguistic nature of these resources and such resources have rich additional semantics. We demonstrate that as a result of these linguistic differences, standard SMT methods, in particular evaluation metrics, can produce poor performance. We then look to the task of leveraging these semantics for translation, which we approach in three ways: by adapting the translation system to the domain of the resource; by examining if semantics can help to predict the syntactic structure used in translation; and by evaluating if we can use existing translated taxonomies to disambiguate translations. We present some early results from these experiments, which shed light on the degree of success we may have with each approach

New laser-based approaches to improve the passivation and rear contact quality in high effiency crystalline silicon solar cells

Laser processing has been the tool of choice last years to develop improved concepts in contact formation for high efficiency crystalline silicon (c-Si) solar cells. New concepts based on standard laser fired contacts (LFC) or advanced laser doping (LD) techniques are optimal solutions for both the front and back contacts of a number of structures with growing interest in the c-Si PV industry. Nowadays, substantial efforts are underway to optimize these processes in order to be applied industrially in high efficiency concepts. However a critical issue in these devices is that, most of them, demand a very low thermal input during the fabrication sequence and a minimal damage of the structure during the laser irradiation process. Keeping these two objectives in mind, in this work we discuss the possibility of using laser-based processes to contact the rear side of silicon heterojunction (SHJ) solar cells in an approach fully compatible with the low temperature processing associated to these devices. First we discuss the possibility of using standard LFC techniques in the fabrication of SHJ cells on p-type substrates, studying in detail the effect of the laser wavelength on the contact quality. Secondly, we present an alternative strategy bearing in mind that a real challenge in the rear contact formation is to reduce the damage induced by the laser irradiation. This new approach is based on local laser doping techniques previously developed by our groups, to contact the rear side of p-type c-Si solar cells by means of laser processing before rear metallization of dielectric stacks containing Al2O3. In this work we demonstrate the possibility of using this new approach in SHJ cells with a distinct advantage over other standard LFC techniques.

Intercultural Approaches to Cities and Spaces in Literature, Film, and New Media: a review of new work by Manzanas and Benito and Lopez-Varela and Net

Intercultural Approaches to Cities and Spaces in Literature, Film, and New Media: a review of new work by Manzanas and Benito and Lopez-Varela and Net

New diagnostic and therapeutic approaches to treat ventricular tachycardias originating at the summit of the left ventricle role of merged hemodynamic-MRI and alternative ablation sources

The left ventricular (LV) summit is the most common site of idiopathic epicardial LV arrhythmias and frequently represents a diagnostic and a therapeutic challenge.1 We present a case of sustained monomorphic ventricular tachycardia (SMVT) originating at the LV summit that underwent failed cryosurgical epicardial ablation and was successfully treated with the aid of merged hemodynamic and contrast-enhanced MRI (CE-MRI).

Statistical mechanics approaches to granular media: between micromechanics and macromechanics

The mechanical behavior of granular materials has been traditionally approached through two theoretical and computational frameworks: macromechanics and micromechanics. Macromechanics focuses on continuum based models. In consequence it is assumed that the matter in the granular material is homogeneous and continuously distributed over its volume so that the smallest element cut from the body possesses the same physical properties as the body. In particular, it has some equivalent mechanical properties, represented by complex and non-linear constitutive relationships. Engineering problems are usually solved using computational methods such as FEM or FDM. On the other hand, micromechanics is the analysis of heterogeneous materials on the level of their individual constituents. In granular materials, if the properties of particles are known, a micromechanical approach can lead to a predictive response of the whole heterogeneous material. Two classes of numerical techniques can be differentiated: computational micromechanics, which consists on applying continuum mechanics on each of the phases of a representative volume element and then solving numerically the equations, and atomistic methods (DEM), which consist on applying rigid body dynamics together with interaction potentials to the particles. Statistical mechanics approaches arise between micro and macromechanics. It tries to state which the expected macroscopic properties of a granular system are, by starting from a micromechanical analysis of the features of the particles and the interactions. The main objective of this paper is to introduce this approach.

Different approaches to grounding resistance. Calculation for thin wire structures at low frequency energization

The present paper deals with the calculation of grounding resistance of an electrode composed of thin wires, that we consider here as perfect electric conductors (PEC) e.g. with null internal resistance, when buried in a soil of uniform resistivity. The potential profile at the ground surface is also calculated when the electrode is energized with low frequency current. The classic treatment by using leakage currents, called Charge Simulated Method (CSM), is compared with that using a set of steady currents along the axis of the wires, here called the Longitudinal Currents Method (LCM), to solve the Maxwell equations. The method of moments is applied to obtain a numerical approximation of the solution by using rectangular basis functions. Both methods are applied to two types of electrodes and the results are also compared with those obtained using a thirth approach, the Average Potential Method (APM), later described in the text. From the analysis performed, we can estimate a value of the error in the determination of grounding resistance as a function of the number of segments in which the electrodes are divided.

The impact of institutional environment and cultural context in the four different approaches to social enterprise

This article analyzes the characteristics of four different social enterprise schools of though (social economy, earned-income school in developed countries, earned-income in emerging countries, and social innovation) and the influence of the contextual elements (cultural, political, economic and social) on their configuration. This article draws on the qualitative discussions of social enterprise in different regions of the world. This paper is intended to contribute to the field of social enterprise by broadening the understanding of the influence of environment and institutions on the emergence of social enterprise.