Acute effects of endurance exercise on jumping and kicking performance in top-class young soccer players

The aim of this study was to examine the acute effects of endurance exercise on jumping and kicking performance in young soccer players. Twenty-one top-class young soccer players (16.1±0.2 years) performed a countermovement jump test and a maximal instep soccer kick test before and after running for 20 min on a treadmill at 80% of their individual maximum heart rate. Two force platforms were used to obtain the following parameters during the countermovement jump: jump height, maximum power, maximum power relative to body mass, maximum vertical ground reaction force, maximum vertical ground reaction force relative to body mass, and maximum vertical ground reaction force applied to each leg. Maximum vertical ground reaction force and maximum vertical ground reaction force relative to body mass applied to the support leg during the kicks were also calculated with a force platform. The kicking motion was recorded using a three-dimensional motion-capture system. Maximum velocity of the ball, maximum linear velocity of the toe, ankle, knee and hip, and linear velocity of the toe at ball contact during the kicks were calculated. Non-significant differences were found in the parameters measured during the countermovement jump and the maximal instep soccer kick test before and after running, suggesting that the jumping and kicking performances of top-class young soccer players were not significantly affected after 20 min treadmill running at 80% of their individual maximum heart rate.

Efficient top-down set-sharing analysis using cliques

Abstract. We study the problem of efficient, scalable set-sharing analysis of logic programs. We use the idea of representing sharing information as a pair of abstract substitutions, one of which is a worst-case sharing representation called a clique set, which was previously proposed for the case of inferring pair-sharing. We use the clique-set representation for (1) inferring actual set-sharing information, and (2) analysis within a top-down framework. In particular, we define the new abstract functions required by standard top-down analyses, both for sharing alone and also for the case of including freeness in addition to sharing. We use cliques both as an alternative representation and as widening, defining several widening operators. Our experimental evaluation supports the conclusión that, for inferring set-sharing, as it was the case for inferring pair-sharing, precisión losses are limited, while useful efficieney gains are obtained. We also derive useful conclusions regarding the interactions between thresholds, precisión, efficieney and cost of widening. At the limit, the clique-set representation allowed analyzing some programs that exceeded memory capacity using classical sharing representations.

Deriving a fixpoint computation algorithm for top-down abstract interpretation of logic programs

Bruynooghe described a framework for the top-down abstract interpretation of logic programs. In this framework, abstract interpretation is carried out by constructing an abstract and-or tree in a top-down fashion for a given query and program. Such an abstract interpreter requires fixpoint computation for programs which contain recursive predicates. This paper presents in detail a fixpoint algorithm that has been developed for this purpose and the motivation behind it. We start off by describing a simple-minded algorithm. After pointing out its shortcomings, we present a series of refinements to this algorithm, until we reach the final version. The aim is to give an intuitive grasp and provide justification for the relative complexity of the final algorithm. We also present an informal proof of correctness of the algorithm and some results obtained from an implementation.

Top-Hat HELLISH-VCSOA for optical amplification and wavelength conversion for 0.85 to 1.3ìm operation

The Top-Hat hot electron light emission and lasing in semiconductor heterostructure (HELLISH)-vertical cavity semiconductor optical amplifier (VCSOA) is a modified version of a HELLISH-VCSOA device. It has a shorter p-channel and longer n-channel. The device studied in this work consists of a simple GaAs p-i-n junction, containing 11 Ga0.35In0.65 N0.02As0.08/GaAs multiple quantum wells in its intrinsic region; the active region is enclosed between six pairs of GaAs/AlAs top distributed Bragg reflector (DBR) mirrors and 20.5 pairs of AlAs/GaAs bottom DBR mirrors. The operation of the device is based on longitudinal current transport parallel to the layers of the GaAs p-n junction. The device is characterised through I-V-L and by spectral photoluminescence, electroluminescence and electro-photoluminescence measurements. An amplification of about 25 dB is observed at applied voltages of around V = 88 V.

Selective area growth and characterization of InGaN nano-disks implemented in GaN nanocolumns with different top morphologies

This work reports on the morphology control of the selective area growth of GaN-based nanostructures on c-plane GaN templates. By decreasing the substrate temperature, the nanostructures morphology changes from pyramidal islands (no vertical m-planes), to GaN nanocolumns with top semipolar r-planes, and further to GaN nanocolumns with top polar c-planes. When growing InGaN nano-disks embedded into the GaN nanocolumns, the different morphologies mentioned lead to different optical properties, due to the semi-polar and polar nature of the r-planes and c-planes involved. These differences are assessed by photoluminescence measurements at low temperature and correlated to the specific nano-disk geometry.

Effect of positioning on the accuracy of decision making of association football top-class referees and assistant referees during competitive matches

The aim of this study was to examine the effect of positioning on the correctness of decision making of top-class referees and assistant referees during international games. Match analyses were carried out during the Fe´de´ration Internationale de Football Association (FIFA) Confederations Cup 2009 and 380 foul play incidents and 165 offside situations were examined. The error percentage for the referees when indicating the incidents averaged 14%. The lowest error percentage occurred in the central area of the field, where the collaboration of the assistant referee is limited, and was achieved when indicating the incidents from a distance of 11–15 m, whereas this percentage peaked (23%) in the last 15-min match period. The error rate for the assistant referees was 13%. Distance of the assistant referee to the offside line did not have an impact on the quality of the offside decision. The risk of making incorrect decisions was reduced when the assistant referees viewed the offside situations from an angle between 46 and 608. Incorrect offside decisions occurred twice as often in the second as in the first half of the games. Perceptual-cognitive training sessions specific to the requirements of the game should be implemented in the weekly schedule of football officials to reduce the overall error rate.

Regression analysis of top of descent location for idle-thrust descents

In this paper, multiple regression analysis is used to model the top of descent (TOD) location of user-preferred descent trajectories computed by the flight management system (FMS) on over 1000 commercial flights into Melbourne, Australia. In addition to recording TOD, the cruise altitude, final altitude, cruise Mach, descent speed, wind, and engine type were also identified for use as the independent variables in the regression analysis. Both first-order and second-order models are considered, where cross-validation, hypothesis testing, and additional analysis are used to compare models. This identifies the models that should give the smallest errors if used to predict TOD location for new data in the future. A model that is linear in TOD altitude, final altitude, descent speed, and wind gives an estimated standard deviation of 3.9 nmi for TOD location given the trajectory parame- ters, which means about 80% of predictions would have error less than 5 nmi in absolute value. This accuracy is better than demonstrated by other ground automation predictions using kinetic models. Furthermore, this approach would enable online learning of the model. Additional data or further knowledge of algorithms is necessary to conclude definitively that no second-order terms are appropriate. Possible applications of the linear model are described, including enabling arriving aircraft to fly optimized descents computed by the FMS even in congested airspace.

Análisis y planteamiento de modelos de negocio de vídeo over the top (OTT)

Aunque esta no es la primera vez que nuevas compañías y tecnologías revolucionan la forma de entender una industria determinada, los modelos over-the-top (OTT) han provocado una explosión en el consumo de contenidos a través de internet, una revolución en la forma tradicional de comunicarse, de disfrutar de nuevas posibilidades de ocio digital y, por tanto, una transformación a la hora de entender los modelos de monetización de las compañías, actualmente buscando su lugar en la nueva cadena de valor. Ya no cabe duda de que este tipo de servicios se han hecho un hueco en la rutina diaria de las personas pero, a pesar de su rápida adopción y alta tasa de penetración, todo parece indicar que es sólo el comienzo de una nueva era, donde estos nuevos modelos disruptivos, están todavía por definirse. Tras unos años de cambios en el sector de las comunicaciones y entretenimiento digital, es ahora el del consumo audiovisual de entretenimiento el que se está viviendo sus debates más intensos. Este trabajo, presentado como proyecto final dentro del Máster de Consultoría en Gestión de Empresas fruto de la colaboración entre la UPM y la AEC, analiza en profundidad los cambios que está generando la adopción de soluciones de vídeo-OTT en el mercado a todos los niveles: cambios en los patrones de comportamiento de las personas, impactos en los sectores tradicionales (y su traducción en términos económicos y legales), evolución de la tecnología, etc. Todos estos aspectos se visitan haciendo especial hincapié en la cadena de valor y los nuevos modelos de negocio derivados de estas nuevas soluciones permitiendo monetizar estos cambios en un mercado complejo. Como complemento, se presenta un análisis de una de las soluciones líderes en el mercado, NETFLIX. Profundizar en un modelo de negocio de una compañía como esta permite analizar las estrategias seguidas y resultados obtenidos en función de la caracterización del mercado existente en cada momento, tomando notas para tener en cuenta en el planteamiento de modelos de negocio similares. Adicionalmente, en el apartado de recomendaciones para la cadena de valor, se establecen una serie de modelos de negocio que permitan enfrentar la aparición y crecimiento de los servicios OTT desde dos puntos de vista: diferenciación y participación de los mismos. Las aportaciones de valor presentadas, prestan especial atención también sobre las operadoras de telecomunicaciones, uno de los sectores más castigados por la entrada en el mercado de las soluciones de vídeo-OTT, junto con la televisión de pago. Por último, se utilizan todas las conclusiones extraídas de los anteriores apartados (que sirven como caracterización de entorno) para establecer un plan de negocio definiendo una propuesta que podría ser interesante desarrollar en el mercado español, carente actualmente de una solución líder que destaque, como ocurre en otros países. En base a este trabajo, se puede concluir que este tipo de servicios de vídeo-OTT presentan un potencial todavía por desarrollar y que conviene incluir en las estrategias de los próximos años de las compañías del sector, si éstas no quieren perder cuota de un mercado que sin duda evolucionará y revolucionará el mundo de la televisión tal y como existe actualmente.

Mechanical characterization of GdBCO/Ag and YBCO single grains fabricated by top-seeded melt growth at 77 and 300 K

YBaCuO and GdBaCuO + 15 wt% Ag large, single-grain, bulk superconductors have been fabricated via the top-seeded, melt-growth (TSMG) process using a generic NdBCO seed. The mechanical behavior of both materials has been investigated by means of three-point bending (TPB) and transversal tensile tests at 77 and 300 K. The strength, fracture toughness and hardness of the samples were studied for two directions of applied load to obtain comprehensive information about the effect of microstructural anisotropy on the macroscopic and microscopic mechanical properties of these technologically important materials. Splitting (Brazilian) tests were carried out on as-melt-processed cylindrical samples following a standard oxygenation process and with the load applied parallel to the growth-facet lines characteristic of the TSMG process. In addition, the elastic modulus of each material was measured by three different techniques and related to the microstructure of each sample using optical microscopy. The results show that both the mechanical properties and the elastic modulus of both YBCO and GdBCP/Ag are improved at 77 K. However, the GdBCO/Ag samples are less anisotropic and exhibit better mechanical behavior due to the presence of silver particles in the bulk, superconducting matrix. The splitting tensile strength was determined at 77 K and both materials were found to exhibit similar behavior, independently of their differences in microstructure.

Temporally flat top pulse generation from gain switched semiconductor lasers based on a polarization interferometer with variable transfer function

We propose the use of a polarization based interferometer with variable transfer function for the generation of temporally flat top pulses from gain switched single mode semiconductor lasers. The main advantage of the presented technique is its flexibility in terms of input pulse characteristics, as pulse duration, spectral bandwidth and operating wavelength. Theoretical predictions and experimental demonstrations are presented and the proposed technique is applied to two different semiconductor laser sources emitting in the 1550 nm region. Flat top pulses are successfully obtained with input seed pulses with duration ranging from 40 ps to 100 ps.

Influence of new integrated pest management strategies on aphidophagous predators in horticultural crops

El 1 de enero de 2014 entró en vigor la Directiva Europea 2009/128/CE sobre uso sostenible de plaguicidas y el Real Decreto 1311/2012 por el cual se traspone dicha normativa comunitaria al ámbito nacional. Estos reglamentos establecen el marco legal por el que las explotaciones agrícolas deben cumplir los principios generales de la Gestión Integrada de Plagas (GIP). Los principios de la GIP dan preferencia a aquellos métodos de control que sean sostenibles y respetuosos con el medio ambiente, dando prioridad al control biológico, al físico y a otros de carácter no químico. Sin embargo, el uso de insecticidas selectivos con los enemigos naturales es necesario en ocasiones para el adecuado manejo de las plagas en cultivos hortícolas. Por ello, el objetivo general de esta Tesis ha sido aportar conocimientos para la mejora del control de plagas en cultivos hortícolas, mediante la integración de estrategias de lucha biológica, física y química. La primera de las líneas de investigación de esta Tesis se centró en el estudio del efecto de la presencia dos depredadores, larvas Chrysoperla carnea y adultos de Adalia bipunctata, en la dispersión del virus de transmisión no persistente Cucumber mosaic virus (CMV) y del virus de transmisión persistente Cucurbit aphid-borne yellows virus (CABYV), transmitidos por el pulgón Aphis gosypii en cultivo de pepino. La tasa de transmisión de CMV fue baja para los dos tiempos de evaluación ensayados (1 y 5 días), debido al limitado movimiento de su vector A. gossypii. Las plantas que resultaron infectadas se localizaron próximas a la fuente de inóculo central y la presencia de ambos enemigos naturales no incrementó significativamente el porcentaje de plantas ocupadas por pulgones ni la tasa de transmisión de CMV. Los patrones de distribución de A. gossypii y de CMV tan solo fueron coincidentes en las proximidades de la planta central infectada en la que se liberaron los insectos. En los ensayos con CABYV, la presencia de C. carnea y de A. bipunctata respectivamente provocó un incremento significativo de la dispersión de A. gossypii tras 14 días, pero no tras 7 días desde la liberación de los insectos. La reducción en el número inicial de pulgones en la planta central infectada con CABYV fue siempre mayor tras la liberación de C. carnea en comparación con A. bipunctata. Sin embargo, la tasa de transmisión de CABYV y su distribución espacial no se vieron significativamente modificadas por la presencia de ninguno de los depredadores, ni tras 7 días ni tras 14 días desde el inicio de los ensayos. Al igual que se estudió el efecto de la presencia de enemigos naturales en el comportamiento de las plagas y en la epidemiología de las virosis que transmiten, en una segunda línea de investigación se evaluó el posible efecto del consumo de pulgones portadores de virus por parte de los enemigos naturales. Este trabajo se llevó a cabo en el Laboratorio de Ecotoxicología del Departamento de Entomología de la Universidade Federal de Lavras (UFLA) (Brasil). En él se evaluó la influencia en los parámetros biológicos del enemigo natural Chrysoperla externa al alimentarse de Myzus persicae contaminados con el virus de transmisión persistente Potato leafroll virus (PLRV). El consumo de M. persicae contaminados con PLRV incrementó significativamente la duración de la fase larvaria, reduciendo también la supervivencia en comparación a otras dos dietas a base de M. persicae no contaminados con el virus y huevos del lepidóptero Ephestia kuehniella. La duración de la fase de pupa de C. externa no difirió significativamente entre las dietas a base de pulgones contaminados con PLRV y pulgones no contaminados, pero ambas fueron menores que con la dieta con huevos de E. kuehniella. Sin embargo, ni la supervivencia en la fase de pupa ni los parámetros reproductivos de los adultos emergidos mostraron diferencias significativas entre las dietas evaluadas. Por el contrario, la supervivencia de los adultos durante los 30 primeros días desde su emergencia sí se vio significativamente afectada por la dieta, siendo al término de este periodo del 54% para aquellos adultos de C. externa que durante su fase larvaria consumieron pulgones con PLRV. Dentro de la GIP, una de las estrategias de carácter físico que se emplean para el control de plagas y enfermedades en cultivos hortícolas protegidos es el uso de plásticos con propiedades fotoselectivas de absorción de la radiación ultravioleta (UV). Por ello, la tercera línea de investigación de la Tesis se centró en el estudio de los efectos directos e indirectos (mediados por la planta) de condiciones especiales de baja radiación UV sobre el crecimiento poblacional del pulgón A. gossypii y los parámetros biológicos del enemigo natural C. carnea, así como sobre las plantas de pepino en las que se liberaron los insectos. Los ensayos se realizaron en jaulones dentro de invernadero, utilizándose en el primero de ellos plantas de pepino sanas, mientras que en el segundo las plantas de pepino fueron previamente infectadas con CABYV para estudiar de qué manera afectaba la incidencia del virus en las mismas condiciones. Las condiciones de baja radiación UV (bajo plástico Térmico Antivirus®) ejercieron un efecto directo en las fases iniciales del cultivo de pepino, promoviendo su crecimiento, mientras que en fases más avanzadas del cultivo indujeron un aumento en el contenido en nitrógeno de las plantas. Las plantas de pepino que fueron sometidas a mayor intensidad de radiación UV (bajo plástico Térmico Blanco®) al inicio del cultivo mostraron un engrosamiento significativo de las paredes de las células epidérmicas del haz de las hojas, así como de la cutícula. El uso del plástico Térmico Antivirus®, utilizado como barrera fotoselectiva para crear condiciones de baja radiación UV, no alteró con respecto al plástico Térmico Blanco® (utilizado como control) el desarrollo poblacional del pulgón A. gossypii ni los parámetros biológicos evaluados en el depredador C. carnea. En el segundo experimento, realizado con plantas infectadas con CABYV, la incidencia de la virosis enmascaró las diferencias encontradas en experimento con plantas sanas, reduciendo aparentemente la influencia de las distintas condiciones de radiación UV. Por último, para el desarrollo de las estrategias de GIP es importante estudiar los posibles efectos secundarios que los plaguicidas pueden tener en los enemigos naturales de las plagas. Es por ello que en la Tesis se evaluaron la toxicidad y los efectos subletales (fecundidad y fertilidad) de flonicamida, flubendiamida, metaflumizona, spirotetramat, sulfoxaflor y deltametrina en los enemigos naturales C. carnea y A. bipunctata. Los efectos secundarios fueron evaluados por contacto residual tanto para larvas como para adultos de ambos enemigos naturales en condiciones de laboratorio. Flonicamida, flubendiamida, metaflumizona y spirotetramat fueron inocuos para larvas de último estadio y adultos de C. carnea y A. bipunctata. Por este motivo, estos insecticidas se presentan como buenos candidatos para ser incorporados dentro de programas de GIP en combinación con estos enemigos naturales para el control de plagas de cultivos hortícolas. Sulfoxaflor fue ligeramente tóxico para adultos de C. carnea y altamente tóxico para larvas de último estadio de A. bipunctata. Para A. bipunctata, sulfoxaflor y deltametrina fueron los compuestos más dañinos. Deltametrina fue también el compuesto más tóxico para larvas y adultos de C. carnea. Por tanto, el uso de deltametrina y sulfoxaflor en programas de GIP debería tomarse en consideración cuando se liberasen cualquiera de estos dos enemigos naturales debido al comportamiento tóxico que mostraron en condiciones de laboratorio. ABSTRACT On 1 January 2014 came into effect the Directive 2009/128/EC of the European Parliament about sustainable use of pesticides and the Royal Decree 1311/2012 that transposes the regulation to the Spanish level. These regulations establish the legal framework that agricultural holdings must adhere to in order to accomplish the general principles of Integrated Pest Management (IPM). The guidelines of IPM give priority to sustainable and eco-friendly pest control techniques, such as biological and physical measures. Nevertheless, the use of pesticides that are selective to natural enemies is sometimes a necessary strategy to implement accurate pest management programs in horticultural protected crops. Therefore, the general objective of this Thesis was to contribute to the improvement of pest management strategies in horticultural crops, by means of the integration of biological, physical and chemical techniques. The first research line of this Thesis was focused on the evaluation of the effects of two aphidophagous predators, Chrysoperla carnea larvae and Adalia bipunctata adults, on the spread of the non-persistently transmitted Cucumber mosaic virus (CMV, Cucumovirus) and the persistently transmitted Cucurbit aphid-borne yellows virus (CABYV, Polerovirus), by the aphid vector Aphis gossypii in a cucumber crop under greenhouse conditions. The CMV transmission rate was generally low, both after 1 and 5 days, due to the limited movement of its aphid vector A. gossypii. Infected plants were mainly located around the central virusinfected source plant, and the percentage of aphid occupation and CMV-infected plants did not differ significantly in absence and presence of natural enemies. The distribution patterns of A. gossypii and CMV were only coincident close to the central plant where insects were released. In the CABYV experiments, the presence of C. carnea larvae and A. bipunctata adults induced significant A. gossypii dispersal after 14 days but not after 7 days. The reduction in the initial aphid population established in the central plant was always higher for C. carnea than for A. bipunctata. Nevertheless, CABYV spread was not significantly modified by the presence of each predator either in the short term (7 days) or in the long term (14 days). Furthermore, the percentage of CABYV-infected plants did not significantly differ when each natural enemy was present in any evaluation period. It is important to evaluate the influence that natural enemies have on pest dynamics and on the spread of viral diseases, but it should be also taken into account the possible effect on the performance of natural enemies when they feed on preys that act as vectors of viruses. Thus, in a second research line developed in the Laboratory of Ecotoxicology, Department of Entomology, of the Universidade Federal de Lavras (UFLA) (Brazil), it was evaluated the performance of Chrysoperla externa under the condition of consuming Myzus persicae acting as vector of Potato leafroll virus (PLRV). The diet composed of PLRV-infected M. persicae significantly increased the length and reduced the survival rate, of the larval period in regard to the other two diets, composed of non-infected M. persicae and Ephestia kuehniella eggs. The lengths of the pupal stage were not significantly different between the aphid diets, but both were significantly shorter than that of E. kuehniella eggs. Neither pupal survival nor reproductive parameters revealed significant differences among the diets. Nevertheless, the adult survival curves during the first 30 days after emergence showed significant differences, reaching at the end of this interval a value of 54% for those C. externa adults fed on PLRVinfected aphids during their larval period. According to the IPM guidelines, one of the physical strategies for the control of pests and diseases in horticultural protected crops is the use of plastic films with photoselective properties that act as ultraviolet (UV) radiation blocking barriers. In this sense, the third research line of the Thesis dealt with the study of the direct and plant-mediated influence of low UV radiation conditions on the performance of the aphid A. gossypii and on the biological parameters of the natural enemy C. carnea, as well as on the cucumber plants where insects were released. The experiments were conducted inside cages under greenhouse conditions, using for the first one healthy cucumber plants, while for the second experiment the cucumber plants were previously infected with CABYV in order to assess the influence of the virus in the same conditions. The low UV radiation conditions (under Térmico Antivirus® plastic film) seemed to exert a direct effect in the early stages of cucumber plants, enhancing their growth, and in an increasing nitrogen content at further developmental stages. The higher UV radiation exposure (under Térmico Blanco® plastic film) in the early stages of the cucumber crop induced the thickening of the adaxial epidermal cell walls and the cuticle of leaves. The use of Térmico Antivirus® plastic film as a photoselective barrier to induce low UV radiation conditions did not modify, in regard to Térmico Blanco® plastic film (used as control), neither the population development of A. gossypii nor the studied biological parameters of the predator C. carnea. In the second experiment, done with CABYV-infected cucumber plants, the incidence of the virus seemed to mask the direct and plant-mediated influence of the different UV radiation conditions. In last term, for the development of IPM strategies it is important to study the potential side effects that pesticides might have on natural enemies. For this reason, in the Thesis were tested the toxicity and sublethal effects (fecundity and fertility) of flonicamid, flubendiamide, metaflumizone, spirotetramat, sulfoxaflor and deltamethrin on the natural enemies C. carnea and A. bipunctata. The side effects of the active ingredients of the insecticides were evaluated with residual contact tests for the larvae and adults of these predators under laboratory conditions. Flonicamid, flubendiamide, metaflumizone and spirotetramat were innocuous to last instar larvae and adults of C. carnea and A. bipunctata. Therefore, these pesticides are promising candidates for being incorporated into IPM programs in combination with these natural enemies for the control of particular greenhouse pests. In contrast, sulfoxaflor was slightly toxic to adults of C. carnea and was highly toxic to last instar larvae of A. bipunctata. For A. bipunctata, sulfoxaflor and deltamethrin were the most damaging compounds. Deltamethrin was also the most toxic compound to larvae and adults of C. carnea. In accordance with this fact, the use of sulfoxaflor and deltamethrin in IPM strategies should be taken into consideration when releasing either of these biological control agents, due to the toxic behavior observed under laboratory conditions.