Normalizar la utopía: Un proyecto de sistematización de la normativa en vivienda social = Normalizing Utopia: A Project of Systematization of Regulations on Social Housing

La presente tesis doctoral aborda el estudio del proyecto de vivienda colectiva social desde la noción de norma, entendida desde la sistematización o normalización de los instrumentos del proyecto arquitectónico de vivienda protegida. Esto es, desde una idea de tipificación taxonómica en cuanto ajuste a un conjunto de reglas comunes productoras de sistemas normativos. La hipótesis de partida se basa en la consideración de la vivienda pública como un laboratorio de estudio histórico de los ideales de confort y calidad de vida. Este campo de pruebas ha constituido una sólida base que ha servido como punto de encuentro muy particular entre proyecto y normativa desde las primeras vanguardias europeas hasta la actualidad. El principal objetivo de la investigación es la revalorización de una normativa de vivienda que ha producido ejemplos de innegable calidad en el contexto nacional e internacional, así como un intento de actualización de su codificación. La investigación se sirve de los instrumentos específicos de la disciplina arquitectónica para explicar una disociación detectada desde la segunda mitad del siglo pasado entre la utopía del proyecto social de vivienda y el pragmatismo de la norma que lo regula, más allá de los aspectos sociales y culturales asociados a las nuevas composiciones familiares, las tecnologías cambiantes, los ritos domésticos contemporáneos o el valor creciente del tiempo libre. La propuesta de una nueva terminología que aborde nuevas relaciones en el acercamiento al proyecto de vivienda desde la normativa española deriva en un conjunto de estrategias de proyecto desde las que proponer sistemas normativos. Dichas estrategias se basan principalmente en mecanismos de cualificación espacial que permitan un nuevo acercamiento entre dichas normas y las formas de habitar actuales. ABSTRACT This doctoral thesis deals with the study of the project of social collective housing from the notion of rule, understanding it from the systematization or standardization of the instruments of architectural project for social housing. Thus, it deals with an idea of taxonomic typification as an adjustment to a set of common rules which produce regulation systems. The initial hypothesis is based on the consideration of public housing as a laboratory for studying the historical ideals of comfort and quality of life. This testing ground has been a solid base that has served as a very specific meeting point between project and regulations from the first European avant‐garde to nowadays. The main objective of this research is the revaluation of housing regulations, which have produced examples of undeniable quality in the national and international stage, as well as an attempt to update their codification. The research assumes the specific tools of the discipline of architecture for explaining a dissociation detected between the utopia of the project for social housing and the pragmatism of the regulations from the second half of last century, beyond social and cultural aspects associated to the new family arrangements, the changing technologies, the contemporary domestic rituals or the rising value of leisure time. The proposal of a new terminology that tackles new relations in the approach to housing project from the Spanish legislation results in a set of strategies to propose regulation systems. Those strategies are mainly based on mechanisms for spatial qualification which allow a new approach between these rules and the current ways of living.

Constructed Fashion: The Catwalk System as an Architectural Project

Teniendo en cuenta que no hay nada que se escape de la moda 1, y extendiendonos más allá de esta manida discusión sobre intersecciones formales, esta investigación propone la pasarela como un lugar real de mediación entre moda y arquitectura. Asumiendo esta condición, la pasarela encarna nuevos modos de producción apropiándose de su espacio y estructura, y convierténdose en una máquina capaz de generar múltiples y más bien infinitos significados. La moda es sin duda un proyecto creativo, que ha venido utilizando la pasarela como un marco para la reordenación de su narrativa visual, renovándose asi mismo como fenómeno social. Este proyecto de investigación plantea, que contrariamente las tipologías actuales de las pasarelas no nos facilitan la comprensión de una colección – que suele ser el objetivo principal. Presentan en cambio un entorno en el que se acoplan diferentes formatos visuales, -con varias capas-, conviéndolo en una compleja construcción y provocando nunerosas fricciones con el espacio-tiempo-acción durante el proceso de creación de otros territorios. Partiendo de la idea de la pasarela como un sistema, en el que sus numerosas variables pueden producir diversas combinaciones, esta investigación plantea la hipótesis por la cual un nuevo sistema de pasarela se estaría formando enteramente con capas de información. Este escenario nos conduciría a la inmersión final de la moda en los tejidos de la virtualidad. Si bien el debate sobre la relevancia de los desfiles de moda se ha vuelto más evidente hoy en día, esta investigación especula con la posibilidad del pensamiento arquitectónico y como este puede introducir metodologías de análisis en el marco de estos desfiles de moda, proponiendo una lectura de la pasarela como un sistema de procedimientos específicos inherente a los proyectos/procesos de la arquitectura. Este enfoque enlaza ambas prácticas en un territorio común donde el espacio, el diseño, el comportamiento, el movimiento, y los cuerpos son ordenados/organizados en la creación de estas nuevas posibilidades visuales, y donde las interacciones activan la generación de la novedad y los mensajes. PALABRAS CLAVES moda, sistema, virtual, información, arquitectura Considering that there is nothing left untouched by fashion2, and going beyond the already exhausted discussion about formal intersections, this research introduces the catwalk as the real arena of mediation between fashion and architecture. By assuming this condition, the catwalk embodies new modes of production that appropriates its space and turns it into a machine for generating multiple if not infinite meanings. Fashion, as a creative project, has utilized the catwalk as a frame for rearranging its visual narrative and renewing itself as social phenomena. This research disputes, however, that the current typologies of catwalks do not facilitate the understanding of the collection – as its primary goal - but, instead, present an environment composed of multi-layered visual formats, becoming a complex construct that collides space-time-action in the creation of other territories. Departing from the analysis of the catwalk as a system and how its many variables can produce diverse combinations, this research presents the hypothesis that a new system is being formed entirely built out of information. Such scenario indicates fashion´s final immersion into the fabrics of virtuality. While the discussion about the relevance of fashion shows has become more evident today, this research serves as an introductory speculation on how architectural thinking can introduce methodologies of analysis within the framework of the fashion shows, by proposing a reading of the catwalk as a system through specific procedures that are inherent to architectural projects. Such approach intertwines both practices into a common territory where space, design, behaviour, movement, and bodies are organized for the creation of visual possibilities, and where interactions are triggered in the making of novelty and messages. KEYWORDS fashion, system, virtual, information, architectural

Application of Deadlock Risk Evaluation of Architectural Models

Software architectural evaluation is a key discipline used to identify, at early stages of a real-time system (RTS) development, the problems that may arise during its operation. Typical mechanisms supporting concurrency, such as semaphores, mutexes or monitors, usually lead to concurrency problems in execution time that are difficult to be identified, reproduced and solved. For this reason, it is crucial to understand the root causes of these problems and to provide support to identify and mitigate them at early stages of the system lifecycle. This paper aims to present the results of a research work oriented to the development of the tool called ‘Deadlock Risk Evaluation of Architectural Models’ (DREAM) to assess deadlock risk in architectural models of an RTS. A particular architectural style, Pipelines of Processes in Object-Oriented Architectures–UML (PPOOA) was used to represent platform-independent models of an RTS architecture supported by the PPOOA –Visio tool. We validated the technique presented here by using several case studies related to RTS development and comparing our results with those from other deadlock detection approaches, supported by different tools. Here we present two of these case studies, one related to avionics and the other to planetary exploration robotics. Copyright © 2011 John Wiley & Sons, Ltd.

Methodological Proposal for Teamwork Evaluation in the field of training Project Management.

Teamwork, is one of the abilities that today is highly valued in the professional arena with a great importance for various personal and interpersonal skills associated with it. In this context, the Technical University of Madrid, is developing a coordinated educational innovation project, which main objective is to develop methodological and assessment tools for the acquisition of personal skills necessary to improve the employability of graduates and their skills for project management. Within this context, this paper proposes a methodology composed of various activities and indicators, as well as specific assessment instruments linked to the teamwork competence. Through a series of systematic steps it was allowed the design of an instrument and construction of a scale for measuring the competence of teamwork. The practical application of the methodology has been carried out in Projects lectures from different Schools of Engineering at the Technical University of Madrid, which results are presented in this document as a pilot experience. Results show the various aspects and methods that teachers should consider in evaluating the competence of the work, including analysis of the quality of results, through reliability and construct validity. On the other hand, show the advantages of applying this methodology in the field of project management teaching.

Strengthening communication skills in an innovative context of engineering project management learning

This document presents an innovative, formal educational initiative that is aimed at enhancing the development of engineering students’ specific competences when studying Project Management (PM) subject. The framework of the experience combines (1) theoretical concepts, (2) the development of a real-case project carried out by multidisciplinary groups of three different universities, (3) the use of software web 2.0 tools and (4) group and individual assignments of students that play different roles (project managers and team members). Under this scenario, the study focuses on monitoring the communication competence in the ever growing PM virtual environment. Factors such as corporal language, technical means, stage, and PM specific vocabulary among others have been considered in order to assess the students’ performance on this issue. As a main contribution, the paper introduces an ad-hoc rubric that, based on previous investigations, has been adapted and tested for the first time to this new and specific context. Additionally, the research conducted has provided some interesting findings that suggest further actions to improve and better define future rubrics, oriented to communication or even other competences. As specific PM subject concerns, it has been detected that students playing the role of Project Managers strengthen their competences more than those ones that play the role of Team Members. It has also been detected that students have more difficulty assimilating concepts related to risk and quality management. However those concepts related with scope, time or cost areas of knowledge have been better assimilated by the students.

Nutrition and physical activity programs for obesity treatment (PRONAF study). methodological approach of the project

Este trabajo aborda la metodología seguida para llevar a cabo el proyecto de investigación PRONAF (Clinical Trials Gov.: number NCT01116856.) Background: At present, scientific consensus exists on the multifactorial etiopatogenia of obesity. Both professionals and researchers agree that treatment must also have a multifactorial approach, including diet, physical activity, pharmacology and/or surgical treatment. These two last ones should be reserved for those cases of morbid obesities or in case of failure of the previous ones. The aim of the PRONAF study is to determine what type of exercise combined with caloric restriction is the most appropriate to be included in overweigth and obesity intervention programs, and the aim of this paper is to describe the design and the evaluation methods used to carry out the PRONAF study. Methods/design: One-hundred nineteen overweight (46 males) and 120 obese (61 males) subjects aged 18–50 years were randomly assigned to a strength training group, an endurance training group, a combined strength + endurance training group or a diet and physical activity recommendations group. The intervention period was 22 weeks (in all cases 3 times/wk of training for 22 weeks and 2 weeks for pre and post evaluation). All subjects followed a hypocaloric diet (25-30% less energy intake than the daily energy expenditure estimated by accelerometry). 29–34% of the total energy intake came from fat, 14–20% from protein, and 50–55% from carbohydrates. The mayor outcome variables assesed were, biochemical and inflamatory markers, body composition, energy balance, physical fitness, nutritional habits, genetic profile and quality of life. 180 (75.3%) subjects finished the study, with a dropout rate of 24.7%. Dropout reasons included: personal reasons 17 (28.8%), low adherence to exercise 3 (5.1%), low adherence to diet 6 (10.2%), job change 6 (10.2%), and lost interest 27 (45.8%). Discussion: Feasibility of the study has been proven, with a low dropout rate which corresponds to the estimated sample size. Transfer of knowledge is foreseen as a spin-off, in order that overweight and obese subjects can benefit from the results. The aim is to transfer it to sports centres. Effectiveness on individual health-related parameter in order to determine the most effective training programme will be analysed in forthcoming publications.

Overview of the project. Sector analysis: Search market.

Which is the economic value of personal information? -How the exchange of information is benefiting society and the economy -How companies create value from personal information (by providing new services or servicing better an existing need). -The mechanisms by which personal information exchange creates economic value - How the level of privacy protection influences value creation in different markets

La pedagogía del criterio desobediente/Pedagogy of Disobedient Criteria

Artículo de crítica de la arquitectura y la aplicación de ésta a la docencia de proyectos arquitectónicos.

Architectural design and construction costs, tools towards territorial sustainability

This paper is presented in CIB: Management and Innovation Sustainable Built Environment 2011, as the study and analysis of the residential model of a rural area from the Iberian Peninsula, specifically applied to the case of the province of Cáceres, in the autonomous region of Extremadura, in Spain. To this end, from a database made up of building projects whose real costs are known, it is intended to establish the links of the different parameters studied through the corresponding functions of statistical analysis. One of the main objectives of this process is constituted by the possibility of establishing those design variables of higher economic importance, so as to keep an economic control of these parameters, generally geometrical and typological, from the very start of the project. And, in general, a higher optimization of resources in the construction of dwellings in the rural environment from their design is intended.

Concept of project: learning lessons

The concept of Project encompasses a semantic disparity that involves all areas of professional and nonprofessional activity. In the engineering projects domain, and starting by the etymological roots of the terms, a review of the definitions given by different authors and their relation with sociological trends of the last decades is carried out. The engineering projects began as a tool for the development of technological ideas and have been improved with legal, economic and management parameters and recently with environmental aspects. However, the engineering projects involve people, groups, agents, organizations, companies and institutions. Nowadays, the social implications of projects are taken into consideration but the technology for social integration is not consolidated. This communication provides a new framework based on the experience for the development of engineering projects in the context of "human development", placing people in the center of the project

The future obligations of "project manager" as construction integral director (DIPE) in the law of buildings construction in spain (LOE)

In the year 1999 approves the Law of Construction Building (LOE, in Spanish) to regulate a sector such as construction, which contained some shortcomings from the legal point of view. Currently, the LOE has been in force 12 years, changing the spanish world of the construction, due to influenced by internationalization. Within the LOE, there regulating the different actors involved in the construction building, as the Projects design, the Director of Construction, the developer, The builder, Director of execution of the construction (actor only in Spain, similar as construcion engineer and abroad in), control entities and the users, but lacks figure Project manager will assume the delegation of the promoter helping and you organize, direct and management the process. This figure assumes that the market and contracts are not legally regulated in Spain, then should define and establish its regulation in the LOE. (Spain Construction Law) The translation in spanish of the words "Project Manager is owed to Professor Rafael de Heredia in his book Integrated Project Management, as agent acting on behalf of the organization and promoter assuming control of the project, ie Integraded Project Management . Already exist in Spain, AEDIP (Spanish Association Integrated of Project Construction management) which comprises the major companies in “Project Management” in Spain, and MeDIP (Master in Integrated Construction Project) the largest and most advanced studies at the Polytechnic University of Madrid, in "Construction Project Management" they teach which is also in Argentina. The Integrated Project ("Project Management") applied to the construction process is a methodological technique that helps to organize, control and manage the resources of the promoters in the building process. When resources are limited (which is usually most situations) to manage them efficiently becomes very important. Well, we find that in this situation, the resources are not only limited, but it is limited, so a comprehensive control and monitoring of them becomes not only important if not crucial. The alternative of starting from scratch with a team that specializes in developing these follow directly intervening to ensure that scarce resources are used in the best possible way requires the use of a specific methodology (Manual DIP, Matrix Foreign EDR breakdown structure EDP Project, Risk Management and Control, Design Management, et ..), that is the methodology used by "Projects managers" to ensure that the initial objectives of the promoters or investors are met and all actors in process, from design to construction company have the mind aim of the project will do, trying to get their interests do not prevail over the interests of the project. Among the agents listed in the building process, "Project Management" or DIPE (Director Comprehensive building process, a proposed name for possible incorporation into the LOE, ) currently not listed as such in the LOE (Act on Construction Planning ), one of the agents that exist within the building process is not regulated from the legal point of view, no obligations, ie, as is required by law to have a project, a builder, a construction management, etc. DIPE only one who wants to hire you as have been advanced knowledge of their services by the clients they have been hiring these agents, there being no legal obligation as mentioned above, then the market is dictating its ruling on this new figure, as if it were necessary, he was not hired and eventually disappeared from the building process. As the aim of this article is regular the process and implement the name of DIPE in the Spanish Law of buildings construction (LOE)

OER Development and Promotion. Outcomes of an International Research Project on the OpenCourseWare Model

In this paper, we describe the successful results of an international research project focused on the use of Web technology in the educational context. The article explains how this international project, funded by public organizations and developed over the last two academic years, focuses on the area of open educational resources (OER) and particularly the educational content of the OpenCourseWare (OCW) model. This initiative has been developed by a research group composed of researchers from three countries. The project was enabled by the Universidad Politécnica de Madrid OCW Office�s leadership of the Consortium of Latin American Universities and the distance education know-how of the Universidad Técnica Particular de Loja (UTPL, Ecuador). We give a full account of the project, methodology, main outcomes and validation. The project results have further consolidated the group, and increased the maturity of group members and networking with other groups in the area. The group is now participating in other research projects that continue the lines developed here

Agile Construction and Evolution of Product-Line Architectures

Software Product Line Engineering (SPLE) has proved to have significant advantages in family-based software development, but also implies the up¬front design of a product-line architecture (PLA) from which individual product applications can be engineered. The big upfront design associated with PLAs is in conflict with the current need of "being open to change". However, the turbulence of the current business climate makes change inevitable in order to stay competitive, and requires PLAs to be open to change even late in the development. The trend of "being open to change" is manifested in the Agile Software Development (ASD) paradigm, but it is spreading to the domain of SPLE. To reduce the big upfront design of PLAs as currently practiced in SPLE, new paradigms are being created, one being Agile Product Line Engineering (APLE). APLE aims to make the development of product-lines more flexible and adaptable to changes as promoted in ASD. To put APLE into practice it is necessary to make mechanisms available to assist and guide the agile construction and evolution of PLAs while complying with the "be open to change" agile principle. This thesis defines a process for "the agile construction and evolution of product-line architectures", which we refer to as Agile Product-Line Archi-tecting (APLA). The APLA process provides agile architects with a set of models for describing, documenting and tracing PLAs, as well as an algorithm to analyze change impact. Both the models and the change impact analysis offer the following capabilities: Flexibility & adaptability at the time of defining software architectures, enabling change during the incremental and iterative design of PLAs (anticipated or planned changes) and their evolution (unanticipated or unforeseen changes). Assistance in checking architectural integrity through change impact analysis in terms of architectural concerns, such as dependencies on earlier design decisions, rationale, constraints, and risks, etc.Guidance in the change decision-making process through change im¬pact analysis in terms of architectural components and connections. Therefore, APLA provides the mechanisms required to construct and evolve PLAs that can easily be refined iteration after iteration during the APLE development process. These mechanisms are provided in a modeling frame¬work called FPLA. The contributions of this thesis have been validated through the conduction of a project regarding a metering management system in electrical power networks. This case study took place in an i-smart software factory and was in collaboration with the Technical University of Madrid and Indra Software Labs. La Ingeniería de Líneas de Producto Software (Software Product Line Engi¬neering, SPLE) ha demostrado tener ventajas significativas en el desarrollo de software basado en familias de productos. SPLE es un paradigma que se basa en la reutilización sistemática de un conjunto de características comunes que comparten los productos de un mismo dominio o familia, y la personalización masiva a través de una variabilidad bien definida que diferencia unos productos de otros. Este tipo de desarrollo requiere el diseño inicial de una arquitectura de línea de productos (Product-Line Architecture, PLA) a partir de la cual los productos individuales de la familia son diseñados e implementados. La inversión inicial que hay que realizar en el diseño de PLAs entra en conflicto con la necesidad actual de estar continuamente "abierto al cam¬bio", siendo este cambio cada vez más frecuente y radical en la industria software. Para ser competitivos es inevitable adaptarse al cambio, incluso en las últimas etapas del desarrollo de productos software. Esta tendencia se manifiesta de forma especial en el paradigma de Desarrollo Ágil de Software (Agile Software Development, ASD) y se está extendiendo también al ámbito de SPLE. Con el objetivo de reducir la inversión inicial en el diseño de PLAs en la manera en que se plantea en SPLE, en los último años han surgido nuevos enfoques como la Ingeniera de Líneas de Producto Software Ágiles (Agile Product Line Engineering, APLE). APLE propone el desarrollo de líneas de producto de forma más flexible y adaptable a los cambios, iterativa e incremental. Para ello, es necesario disponer de mecanismos que ayuden y guíen a los arquitectos de líneas de producto en el diseño y evolución ágil de PLAs, mientras se cumple con el principio ágil de estar abierto al cambio. Esta tesis define un proceso para la "construcción y evolución ágil de las arquitecturas de lineas de producto software". A este proceso se le ha denominado Agile Product-Line Architecting (APLA). El proceso APLA proporciona a los arquitectos software un conjunto de modelos para de¬scribir, documentar y trazar PLAs, así como un algoritmo para analizar vel impacto del cambio. Los modelos y el análisis del impacto del cambio ofrecen: Flexibilidad y adaptabilidad a la hora de definir las arquitecturas software, facilitando el cambio durante el diseño incremental e iterativo de PLAs (cambios esperados o previstos) y su evolución (cambios no previstos). Asistencia en la verificación de la integridad arquitectónica mediante el análisis de impacto de los cambios en términos de dependencias entre decisiones de diseño, justificación de las decisiones de diseño, limitaciones, riesgos, etc. Orientación en la toma de decisiones derivadas del cambio mediante el análisis de impacto de los cambios en términos de componentes y conexiones. De esta manera, APLA se presenta como una solución para la construcción y evolución de PLAs de forma que puedan ser fácilmente refinadas iteración tras iteración de un ciclo de vida de líneas de producto ágiles. Dicha solución se ha implementado en una herramienta llamada FPLA (Flexible Product-Line Architecture) y ha sido validada mediante su aplicación en un proyecto de desarrollo de un sistema de gestión de medición en redes de energía eléctrica. Dicho proyecto ha sido desarrollado en una fábrica de software global en colaboración con la Universidad Politécnica de Madrid e Indra Software Labs.

Los agentes de la edificación desde el punto de vista de la Gestión Integral de Proyectos: diferencias y semejanzas entre la Legislación Española y los Estándares Internacionales = Expert agents in the Global Development of a building project: differences and similarities between Spanish and International contexts.

Desde los años 60, crece en Europa y Estados Unidos la preocupación y la necesidad de mejorar los procesos de gerencia de los proyectos de construcción al volverse estos más complejos. Esto ha llevado a la continua aparición de nuevos profesionales desde la fecha citada hasta nuestros días. De ahí la complejidad de conocer las cualidades de cada uno de ellos, así como las funciones a realizar o la formación que deben tener para poder desarrollar el puesto de trabajo según el papel que desempeñan para cada actividad. Muchos agentes son los que pueden intervenir en la edificación, muchas son las funciones que llevan a cabo estos agentes, muchas son las habilidades que se necesitan para realizar estas misiones, y una buena gestión de la edificación es la que hay que desarrollar para lograr el gran éxito. El presente trabajo fin de máster, dirigido a arquitectos, arquitectos técnicos, ingenieros, abogados, economistas y todos los profesionales del sector inmobiliario y de la construcción, trata de resolver todas aquellas dudas sobre los diferentes sujetos que estarán presentes desde la definición del proyecto en la fase inicial hasta el final de la obra, pasando por las fases de pre-construcción, construcción y post-construcción. (ENGLISH VERSION) Since the 1960s, most construction projects have become more and more complex, and new concerns and necessities related to the management of a project have been on the rise in Europe and in the United States. Thence, the need for more specialized professionals in the field has become a common fact, as well as the inclusion of new curricular subjects in most building engineering studies. There are different agents that play a relevant role in a building project; some of them are expected to perform a highly specialized set of functions that require specific management skills for the work to be successful. This research work—aimed mainly at engineers, quantity surveyors, lawyers, economists, real estate and construction professionals—shows the major implications of the building construction process including both pre-tender/construction and post-tender/construction stages as far as the main expert agents are involved.

Project based learning activities as a means of adapting conventional curricula to the demands of the 21st century aeronautical engineer: The design and building of the EYEFLY 1.

In this paper we report the process of designing and building the EYEFLY 1, a real UAS platform which has just performed its maiden flight. For the development of this aircraft, 30 groups of students from successive years at the Escuela Universitaria de Ingeniería Técnica Aeronáutica (EUITA) of the Universidad Politécnica de Madrid (UPM) carried out their compulsory End of Degree Project as a coordinated Project Based learning activity. Our conclusions clearly indicate that Project Based Learning activities can provide a valid complement to more conventional, theoretically-based, teaching methods. The combination of both approaches will allow us to maintain traditional but well-tested methods for providing our students with a sound knowledge of fundamental engineering disciplines and, at the same time, to introduce our students to exciting and relevant engineering situations and sceneries where social and business skills, such as communication skills, team-working or decision-taking, can be put into practice.