Arquitectura óptima: Cuatro medios prácticos para optimizar proyectos de arquitectura

La investigación trata de mostrar cuatro acciones habitualmente empleadas al proyectar arquitectura. La tesis narra el discurso que construyen cuatro acciones como mecanismos optimizadores, fundamentales, activos y necesarios cuando creamos nuevos proyectos. En este trabajo se estudian en profundidad cuatro acciones optimizadoras a través de numerosos casos de estudio. Se estudia también la presencia de estas acciones en otros campos creativos, como la biología, el arte, la literatura, la filosofía, la matemática o la psicología de la creatividad. Se busca qué tienen en común estas cuatro acciones y se indaga sobre la posible narración que construyen entre ellas. La mayor parte de los textos que constituyen este trabajo se escriben en un formato próximo al del ensayo, empleando tiempos verbales presentes evitando los tiempos verbales pretéritos o imperfectos para potenciar la acción a través el estilo narrativo. La investigación se ha realizado a partir de fuentes bibliográficas existentes en numerosas bibliotecas. Se han llevado a cabo estudios de campo realizados a través de entrevistas personales a interlocutores expertos, no sólo de teoría arquitectónica sino también de prácticas constructivas, así como visitas a lugares íntimamente relacionados con el tema de investigación. Se ha completado el estudio de casos con ejercicios prácticos realizados por el autor de esta tesis, para profundizar con la propia investigación por empatía con los autores estudiados. La investigación bibliográfica principal se ha desarrollado en las bibliotecas de la Universidad Politécnica de Madrid, de la Universidad de Alicante, de la Universidad Autónoma de Madrid, de la Universidad Europea de Madrid, de la Universidad Camilo José Cela, de la Universidad Complutense de Madrid, de la Columbia University, de la Harvard University, de la Delft University, de Heidelberg University, de la Biblioteca Central de Madrid y de la Regional de Murcia, así como de la del COAMU. También se ha utilizado recursos bibliográficos propios. La metodología utilizada muestra desde diferentes perspectivas el problema de las acciones optimizadoras, desde obras artísticas, pasando por ejemplos de arquitectura construida hasta ejercicios puramente intelectuales. La acumulación ha sido el método de obtención de conocimiento de esta tesis. Se han acumulado conocimientos y posteriormente se ha profundizado, reflexionando sobre los datos que se han ido obteniendo. Al profundizar se enlazan unas pruebas con otras, hilando y ensamblándolas en un discurso que hace continuo y coherente la aparición de cada caso estudiado. Estas entidades probatorias son acciones que han sido aplicadas frecuentemente por distintas generaciones de autores que proyectan utilizando alguna de estas cuatro acciones. Partimos de una extensa bibliografía general y de otra específica. A través de citas e imágenes se muestra el repertorio de objetos y textos estudiados. Los casos de estudio seleccionados exponen los efectos que produce cada acción en el ejercicio del proyectar. Se ha estudiado la necesidad de cada acción en todas y cada una de las partes del ciclo creativo del proyecto, tanto en prácticas imaginadas como en construidas, de los autores que proyectan. Se citan y se interpretan las descripciones de biólogos, sociólogos, antropólogos, psicólogos, escritores, artistas, arquitectos, matemáticos, ingenieros, físicos, médicos y filósofos en los cuales estas acciones se encuentran conscientemente incorporadas en su procedimiento de proyectar y de pensar. Por último, hemos obtenido unos resultados adecuados a la metodología empleada y a los objetivos planteados gracias a la acumulación y clasificación de pruebas. Los resultados se exponen a modo de discursos conclusivos con un intencionado carácter abierto que despliega nuevas posibles nuevas vías de investigación entorno a los temas estudiados. ABSTRACT. The research seeks to show four commonly used actions in designing architecture. Thesis recounts the speech that built four actions like optimizer, fundamental, active and necessary mechanisms when we create new projects. In this work it studies in depth four optimizer actions through numerous case studies. Also, it considers the presence of these actions in other creative fields, such as biology, art, literature, philosophy, mathematics or psychology of creativity. It is intended what these four actions have in common and it explores the possible narrative constructed among them. Most of the texts that constitute this work are written in a format close to the essay, using present tenses avoiding past or imperfect tenses of enhancing the action through the narrative style. Research has been done from literature sources available in numerous libraries. Field studies have been carried out through personal interviews with expert speakers, not just of architectonic theory but also from constructive practices, as well as visits to sites closely related to the research topic. case studies with practical exercises conducted by the author of this thesis has been completed, to deepen with the own research by empathy with the studied authors. Main bibliographical investigation has been developed in the libraries of UPM, UA, UAM, UEM, the CJC, the UCM, Columbia University, Harvard University Delft University, Heidelberg University, Madrid Central Library, Regional Murcia Library and COAMU Library. Also it has been used own bibliographical resources. Methodology shows from different perspectives the problem of optimizers actions, from art, passing through examples of architecture built up to puré intellectual exercise. Accumulation has been the method of obtaining knowledge of this thesis. it has been accumulated knowledge and later it has been deepened, reflecting on the data that have been obtained. By deepening tests are linked with other, spinning and locking into a discourse that makes continuous and consistent the development of each case study. These evidentiary entities are actions that have been frequently applied by different generations of authors who project using some of these four stocks. We leave from an extensive general bibliography and another specific one. Through quotes and pictures it shows the repertoire of objects and texts studied. The selected study cases set out the effects that each action produces in the exercise of projecting. It has studied the need of each action in every parts of creative cycle of the project, both imagined as constructed practices, by the authors who project. It is quoted and interpreted the descriptions of biologists, sociologists, anthropologists, psychologists, writers, artists, architects, mathematicians, engineers, physicists, physicians and philosophers in which these actions are consciously incorporated into his projecting and thinking procedure. Finally, we have obtained adequate results to the used methodology and to the stated objectives through the accumulation and classification of evidence. The results are presented as conclusive speeches with an intentional open character that unfolds new possible research routes around the studied topics.

Wedges and plate-bandes: mechanical theories after De la Hire

Plate-bandes are straight masonry arches (they are called, also, flat arches or lintel arches). Ideally they have the surfaces of extrados and intrados plane and horizontal. The stones or bricks have radial joints converging usually in one centre. The voussoirs have the form of wedges and in French they are called "claveaux". A plate-bande is, in fact, a lintel made of several stones and the proportions of lintels and plate-bandes are similar. Proportions of plate-bandes, that is the relationship between the thickness t and the span s (t/s)varies, typically between 1/4–1/3 in thick plate-bandes, and is less than 1/20 in the most slender ones. A ratio of circa 1/8 was usual in the 18th Century and follows a simple geometrical rule: the centre form with the intrados an equilateral triangle and the plate-bande should contain an arc of circle. The joints are usually plane, but in some cases present a «rebated» or «stepped» form. Plate-bandes exert an inclined thrust as any masonry arch. This thrust is usually very high and it requires either massive buttresses, or to be built in the middle of thick walls. Master builders and architects have tried since antiquity to calculate the abutment necessary for any arch. A modern architect or engineer will measure the arch thrust in units of force, kN or tons. Traditionally, the thrust has been measured as the size of the buttresses to resist it safely. Old structural rules, then, addressed the design problem establishing a relationship between the span and the depth of the buttress. These were empirical rules, particular for every type of arch or structure in every epoch. Thus, the typical gothic buttress is 1/4 of the vault span, but a Renaissance or baroque barrel vault will need more than 1/3 of the span. A plate-bande would require more than one half of the span; this is precisely the rule cited by the French engineer Gautier, who tried unsuccessfully to justify it by static reasons. They were used, typically, to form the lintels of windows or doors (1-2 m, typically); in Antiquity they were used, also, though rarely, at the gates of city walls or in niches (ca. 2 m, reaching 5.2 m). Plate-bandes may show particular problems: it is not unusual that some sliding of the voussoirs can be observed, particularly in thick plate-bandes. The stepped joints on Fig. 1, left, were used to avoid this problem. There are other «hidden» methods, like iron cramps or the use of stone wedges, etc. In seismic zones these devices were usual. Another problem relates to the deformation; a slight yielding of the abutments, or even the compression of the mortar joints, may lead to some cracking and the descent of the central keystone. Even a tiny descent will convert the original straight line of the intrados in a broken line with a visible «kink» or angle in the middle. Of course, both problems should be avoided. Finally, the wedge form of the voussoirs lead to acute angles in the stones and this can produce partial fractures; this occurs usually at the inferior border of the springers at the abutments. It follows, that to build a successful plate-bande is not an easy matter. Also, the structural study of plate-bandes is far from simple, and mechanics and geometry are related in a particular way. In the present paper we will concentrate on the structural aspects and their constructive consequences, with a historical approach. We will outline the development of structural analysis of plate-bandes from ca. 1700 until today. This brief history has a more than purely academic interest. Different approaches and theories pointed to particular problem, and though the solution given may have been incorrect, the question posed was often pertinent. The paper ends with the application of modern Limit Analysis of Masonry Structures, developed mainly by professor Heyman in the last fifty years. The work aims, also, to give some clues for the actual architect and engineer involved in the analysis or restoration of masonry buildings.

E.1027. Maison en bord de mer: Theoretical Restoration

E.1027, Maison en bord de mer is a small villa in Roquebrune Cap-Martin, built by architects Eileen Gray and Jean Badovici between 1926 and 1929. It was hailed as a landmark of modern architecture, and then forgotten. Over the years many transformations have been carried out, and these changes have altered the spatial qualities of the original project. Time and neglect have taken their toll, and until 2008 the villa was abandoned, a shadow of its former self. In order to state an appropriate restoration, a description of the house and its historic evolution has been made, comparing plans of its different transformations. After compiling the most common pathologies and restoration procedures in buildings of the Modern Movement in general, the particular pathologies of E.1027 are presented, concluding with a restoration proposal for E.1027 that considers aesthetical as well as technical aspects. This study involves an attempt to establish guidelines for the theoretical and technical aspects for restoration of architecture of the Modern Movement, using the Maison en bord de mer as an example.

Health and safety in the construction : subject pending to be included in the curriculum of architecture in Spain

The art of construction is a risky activity that directly affects the life and physical integrity of persons. Since the approval of Law 31/1995, of November 8, Prevention of Occupational Risks was the first legislation that established the current basis in all sectors and then transposed into Spanish law Directive 92/57/CEE called Royal Decree 1627/1997 of October 24, on minimum safety and health dispositions in construction works, measures have been proposed to develop a mixed body of scientific literature composed of researchers and professionals in the field of occupational safety and health, but even today there is still no clear and firm proposal, showing a lack of awareness in the occupational risk prevention and, therefore, a consolidation of the culture of prevention in society. Therefore, the technicians, who make up the building process, can incur in very high responsibilities, such as: Author of the project, Coordinator of Safety and Health during the preparation of the project and during the execution of works, Site Management: Site Manager. This involves the immediate creation of a general training in prevention for all architects starting when still studying, as well as specific training, appropriate and complementary to all the architects that will be devoted to the specialty of occupational safety and health in construction works. That is, first, we must make the responsible bodies aware of the urgent need to integrate risk prevention in the curricula of architecture and later in the continuing education of the profession. It is necessary that our teaching must conform to the laws on safety and health, due to the fact that the law recognizes our academic degrees and professional qualifications to perform functions in that area

Agile Construction and Evolution of Product-Line Architectures

Software Product Line Engineering (SPLE) has proved to have significant advantages in family-based software development, but also implies the up¬front design of a product-line architecture (PLA) from which individual product applications can be engineered. The big upfront design associated with PLAs is in conflict with the current need of "being open to change". However, the turbulence of the current business climate makes change inevitable in order to stay competitive, and requires PLAs to be open to change even late in the development. The trend of "being open to change" is manifested in the Agile Software Development (ASD) paradigm, but it is spreading to the domain of SPLE. To reduce the big upfront design of PLAs as currently practiced in SPLE, new paradigms are being created, one being Agile Product Line Engineering (APLE). APLE aims to make the development of product-lines more flexible and adaptable to changes as promoted in ASD. To put APLE into practice it is necessary to make mechanisms available to assist and guide the agile construction and evolution of PLAs while complying with the "be open to change" agile principle. This thesis defines a process for "the agile construction and evolution of product-line architectures", which we refer to as Agile Product-Line Archi-tecting (APLA). The APLA process provides agile architects with a set of models for describing, documenting and tracing PLAs, as well as an algorithm to analyze change impact. Both the models and the change impact analysis offer the following capabilities: Flexibility & adaptability at the time of defining software architectures, enabling change during the incremental and iterative design of PLAs (anticipated or planned changes) and their evolution (unanticipated or unforeseen changes). Assistance in checking architectural integrity through change impact analysis in terms of architectural concerns, such as dependencies on earlier design decisions, rationale, constraints, and risks, etc.Guidance in the change decision-making process through change im¬pact analysis in terms of architectural components and connections. Therefore, APLA provides the mechanisms required to construct and evolve PLAs that can easily be refined iteration after iteration during the APLE development process. These mechanisms are provided in a modeling frame¬work called FPLA. The contributions of this thesis have been validated through the conduction of a project regarding a metering management system in electrical power networks. This case study took place in an i-smart software factory and was in collaboration with the Technical University of Madrid and Indra Software Labs. La Ingeniería de Líneas de Producto Software (Software Product Line Engi¬neering, SPLE) ha demostrado tener ventajas significativas en el desarrollo de software basado en familias de productos. SPLE es un paradigma que se basa en la reutilización sistemática de un conjunto de características comunes que comparten los productos de un mismo dominio o familia, y la personalización masiva a través de una variabilidad bien definida que diferencia unos productos de otros. Este tipo de desarrollo requiere el diseño inicial de una arquitectura de línea de productos (Product-Line Architecture, PLA) a partir de la cual los productos individuales de la familia son diseñados e implementados. La inversión inicial que hay que realizar en el diseño de PLAs entra en conflicto con la necesidad actual de estar continuamente "abierto al cam¬bio", siendo este cambio cada vez más frecuente y radical en la industria software. Para ser competitivos es inevitable adaptarse al cambio, incluso en las últimas etapas del desarrollo de productos software. Esta tendencia se manifiesta de forma especial en el paradigma de Desarrollo Ágil de Software (Agile Software Development, ASD) y se está extendiendo también al ámbito de SPLE. Con el objetivo de reducir la inversión inicial en el diseño de PLAs en la manera en que se plantea en SPLE, en los último años han surgido nuevos enfoques como la Ingeniera de Líneas de Producto Software Ágiles (Agile Product Line Engineering, APLE). APLE propone el desarrollo de líneas de producto de forma más flexible y adaptable a los cambios, iterativa e incremental. Para ello, es necesario disponer de mecanismos que ayuden y guíen a los arquitectos de líneas de producto en el diseño y evolución ágil de PLAs, mientras se cumple con el principio ágil de estar abierto al cambio. Esta tesis define un proceso para la "construcción y evolución ágil de las arquitecturas de lineas de producto software". A este proceso se le ha denominado Agile Product-Line Architecting (APLA). El proceso APLA proporciona a los arquitectos software un conjunto de modelos para de¬scribir, documentar y trazar PLAs, así como un algoritmo para analizar vel impacto del cambio. Los modelos y el análisis del impacto del cambio ofrecen: Flexibilidad y adaptabilidad a la hora de definir las arquitecturas software, facilitando el cambio durante el diseño incremental e iterativo de PLAs (cambios esperados o previstos) y su evolución (cambios no previstos). Asistencia en la verificación de la integridad arquitectónica mediante el análisis de impacto de los cambios en términos de dependencias entre decisiones de diseño, justificación de las decisiones de diseño, limitaciones, riesgos, etc. Orientación en la toma de decisiones derivadas del cambio mediante el análisis de impacto de los cambios en términos de componentes y conexiones. De esta manera, APLA se presenta como una solución para la construcción y evolución de PLAs de forma que puedan ser fácilmente refinadas iteración tras iteración de un ciclo de vida de líneas de producto ágiles. Dicha solución se ha implementado en una herramienta llamada FPLA (Flexible Product-Line Architecture) y ha sido validada mediante su aplicación en un proyecto de desarrollo de un sistema de gestión de medición en redes de energía eléctrica. Dicho proyecto ha sido desarrollado en una fábrica de software global en colaboración con la Universidad Politécnica de Madrid e Indra Software Labs.

Contradictio in terminis: dialéctica de la ambigüedad en la arquitectura contemporánea

The twentieth century brought a new sensibility characterized by the discredit of cartesian rationality and the weakening of universal truths, related with aesthetic values as order, proportion and harmony. In the middle of the century, theorists such as Theodor Adorno, Rudolf Arnheim and Anton Ehrenzweig warned about the transformation developed by the artistic field. Contemporary aesthetics seemed to have a new goal: to deny the idea of art as an organized, finished and coherent structure. The order had lost its privileged position. Disorder, probability, arbitrariness, accidentality, randomness, chaos, fragmentation, indeterminacy... Gradually new terms were coined by aesthetic criticism to explain what had been happening since the beginning of the century. The first essays on the matter sought to provide new interpretative models based on, among other arguments, the phenomenology of perception, the recent discoveries of quantum mechanics, the deeper layers of the psyche or the information theories. Overall, were worthy attempts to give theoretical content to a situation as obvious as devoid of founding charter. Finally, in 1962, Umberto Eco brought together all this efforts by proposing a single theoretical frame in his book Opera Aperta. According to his point of view, all of the aesthetic production of twentieth century had a characteristic in common: its capacity to express multiplicity. For this reason, he considered that the nature of contemporary art was, above all, ambiguous. The aim of this research is to clarify the consequences of the incorporation of ambiguity in architectural theoretical discourse. We should start making an accurate analysis of this concept. However, this task is quite difficult because ambiguity does not allow itself to be clearly defined. This concept has the disadvantage that its signifier is as imprecise as its signified. In addition, the negative connotations that ambiguity still has outside the aesthetic field, stigmatizes this term and makes its use problematic. Another problem of ambiguity is that the contemporary subject is able to locate it in all situations. This means that in addition to distinguish ambiguity in contemporary productions, so does in works belonging to remote ages and styles. For that reason, it could be said that everything is ambiguous. And that’s correct, because somehow ambiguity is present in any creation of the imperfect human being. However, as Eco, Arnheim and Ehrenzweig pointed out, there are two major differences between current and past contexts. One affects the subject and the other the object. First, it’s the contemporary subject, and no other, who has acquired the ability to value and assimilate ambiguity. Secondly, ambiguity was an unexpected aesthetic result in former periods, while in contemporary object it has been codified and is deliberately present. In any case, as Eco did, we consider appropriate the use of the term ambiguity to refer to the contemporary aesthetic field. Any other term with more specific meaning would only show partial and limited aspects of a situation quite complex and difficult to diagnose. Opposed to what normally might be expected, in this case ambiguity is the term that fits better due to its particular lack of specificity. In fact, this lack of specificity is what allows to assign a dynamic condition to the idea of ambiguity that in other terms would hardly be operative. Thus, instead of trying to define the idea of ambiguity, we will analyze how it has evolved and its consequences in architectural discipline. Instead of trying to define what it is, we will examine what its presence has supposed in each moment. We will deal with ambiguity as a constant presence that has always been latent in architectural production but whose nature has been modified over time. Eco, in the mid-twentieth century, discerned between classical ambiguity and contemporary ambiguity. Currently, half a century later, the challenge is to discern whether the idea of ambiguity has remained unchanged or have suffered a new transformation. What this research will demonstrate is that it’s possible to detect a new transformation that has much to do with the cultural and aesthetic context of last decades: the transition from modernism to postmodernism. This assumption leads us to establish two different levels of contemporary ambiguity: each one related to one these periods. The first level of ambiguity is widely well-known since many years. Its main characteristics are a codified multiplicity, an interpretative freedom and an active subject who gives conclusion to an object that is incomplete or indefinite. This level of ambiguity is related to the idea of indeterminacy, concept successfully introduced into contemporary aesthetic language. The second level of ambiguity has been almost unnoticed for architectural criticism, although it has been identified and studied in other theoretical disciplines. Much of the work of Fredric Jameson and François Lyotard shows reasonable evidences that the aesthetic production of postmodernism has transcended modern ambiguity to reach a new level in which, despite of the existence of multiplicity, the interpretative freedom and the active subject have been questioned, and at last denied. In this period ambiguity seems to have reached a new level in which it’s no longer possible to obtain a conclusive and complete interpretation of the object because it has became an unreadable device. The postmodern production offers a kind of inaccessible multiplicity and its nature is deeply contradictory. This hypothetical transformation of the idea of ambiguity has an outstanding analogy with that shown in the poetic analysis made by William Empson, published in 1936 in his Seven Types of Ambiguity. Empson established different levels of ambiguity and classified them according to their poetic effect. This layout had an ascendant logic towards incoherence. In seventh level, where ambiguity is higher, he located the contradiction between irreconcilable opposites. It could be said that contradiction, once it undermines the coherence of the object, was the better way that contemporary aesthetics found to confirm the Hegelian judgment, according to which art would ultimately reject its capacity to express truth. Much of the transformation of architecture throughout last century is related to the active involvement of ambiguity in its theoretical discourse. In modern architecture ambiguity is present afterwards, in its critical review made by theoreticians like Colin Rowe, Manfredo Tafuri and Bruno Zevi. The publication of several studies about Mannerism in the forties and fifties rescued certain virtues of an historical style that had been undervalued due to its deviation from Renacentist canon. Rowe, Tafuri and Zevi, among others, pointed out the similarities between Mannerism and certain qualities of modern architecture, both devoted to break previous dogmas. The recovery of Mannerism allowed joining ambiguity and modernity for first time in the same sentence. In postmodernism, on the other hand, ambiguity is present ex-professo, developing a prominent role in the theoretical discourse of this period. The distance between its analytical identification and its operational use quickly disappeared because of structuralism, an analytical methodology with the aspiration of becoming a modus operandi. Under its influence, architecture began to be identified and studied as a language. Thus, postmodern theoretical project discerned between the components of architectural language and developed them separately. Consequently, there is not only one, but three projects related to postmodern contradiction: semantic project, syntactic project and pragmatic project. Leading these projects are those prominent architects whose work manifested an especial interest in exploring and developing the potential of the use of contradiction in architecture. Thus, Robert Venturi, Peter Eisenman and Rem Koolhaas were who established the main features through which architecture developed the dialectics of ambiguity, in its last and extreme level, as a theoretical project in each component of architectural language. Robert Venturi developed a new interpretation of architecture based on its semantic component, Peter Eisenman did the same with its syntactic component, and also did Rem Koolhaas with its pragmatic component. With this approach this research aims to establish a new reflection on the architectural transformation from modernity to postmodernity. Also, it can serve to light certain aspects still unaware that have shaped the architectural heritage of past decades, consequence of a fruitful relationship between architecture and ambiguity and its provocative consummation in a contradictio in terminis. Esta investigación centra su atención fundamentalmente sobre las repercusiones de la incorporación de la ambigüedad en forma de contradicción en el discurso arquitectónico postmoderno, a través de cada uno de sus tres proyectos teóricos. Está estructurada, por tanto, en torno a un capítulo principal titulado Dialéctica de la ambigüedad como proyecto teórico postmoderno, que se desglosa en tres, de títulos: Proyecto semántico. Robert Venturi; Proyecto sintáctico. Peter Eisenman; y Proyecto pragmático. Rem Koolhaas. El capítulo central se complementa con otros dos situados al inicio. El primero, titulado Dialéctica de la ambigüedad contemporánea. Una aproximación realiza un análisis cronológico de la evolución que ha experimentado la idea de la ambigüedad en la teoría estética del siglo XX, sin entrar aún en cuestiones arquitectónicas. El segundo, titulado Dialéctica de la ambigüedad como crítica del proyecto moderno se ocupa de examinar la paulatina incorporación de la ambigüedad en la revisión crítica de la modernidad, que sería de vital importancia para posibilitar su posterior introducción operativa en la postmodernidad. Un último capítulo, situado al final del texto, propone una serie de Proyecciones que, a tenor de lo analizado en los capítulos anteriores, tratan de establecer una relectura del contexto arquitectónico actual y su evolución posible, considerando, en todo momento, que la reflexión en torno a la ambigüedad todavía hoy permite vislumbrar nuevos horizontes discursivos. Cada doble página de la Tesis sintetiza la estructura tripartita del capítulo central y, a grandes rasgos, la principal herramienta metodológica utilizada en la investigación. De este modo, la triple vertiente semántica, sintáctica y pragmática con que se ha identificado al proyecto teórico postmoderno se reproduce aquí en una distribución específica de imágenes, notas a pie de página y cuerpo principal del texto. En la columna de la izquierda están colocadas las imágenes que acompañan al texto principal. Su distribución atiende a criterios estéticos y compositivos, cualificando, en la medida de lo posible, su condición semántica. A continuación, a su derecha, están colocadas las notas a pie de página. Su disposición es en columna y cada nota está colocada a la misma altura que su correspondiente llamada en el texto principal. Su distribución reglada, su valor como notación y su posible equiparación con una estructura profunda aluden a su condición sintáctica. Finalmente, el cuerpo principal del texto ocupa por completo la mitad derecha de cada doble página. Concebido como un relato continuo, sin apenas interrupciones, su papel como responsable de satisfacer las demandas discursivas que plantea una investigación doctoral está en correspondencia con su condición pragmática.

Simulación de maniobras de buques con sistemas de propulsión no convencional en aguas poco profundas

Los requisitos cada vez más exigentes en cuanto a misiones, limitaciones operacionales y ambientales así como nuevas tecnologías, imponen permanentemente retos a los arquitectos navales para generar alternativas de buques y valorar su bondad en las primeras etapas del proyecto. Este es el caso de los Buques Patrulleros de Apoyo Fluvial Pesados PAF-P, que por requerimiento de la Armada Nacional de Colombia ha diseñado y construido COTECMAR. Los PAF-P, son buques fluviales cuya relación Manga-Calado excede la mayoría de los buques existentes (B/T=9,5), debido principalmente a las restricciones en el calado a consecuencia de la escasa profundidad de los ríos. Estos buques están equipados con sistemas de propulsión acimutales tipo “Pum-Jet”. Las particularidades del buque y del ambiente operacional, caracterizado por ríos tropicales con una variabilidad de profundidad dependiente del régimen de lluvias y sequía, así como la falta de canalización y la corriente, hacen que la maniobrabilidad y controlabilidad sean fundamentales para el cumplimiento de su misión; adicionalmente, no existen modelos matemáticos validados que permitan predecir en las primeras etapas del diseño la maniobrabilidad de este tipo de buques con los efectos asociados por profundidad. La presente tesis doctoral aborda el desarrollo de un modelo matemático para simulación de maniobrabilidad en aguas poco profundas de buques con relación manga-calado alta y con propulsores acimutales tipo “Pump-Jet”, cuyo chorro además de entregar el empuje necesario para el avance del buque, genera la fuerza de gobierno en función del ángulo de orientación del mismo, eliminando la necesidad de timones. El modelo matemático ha sido validado mediante los resultados obtenidos en las pruebas de maniobrabilidad a escala real del PAF-P, a través de la comparación de trayectorias, series temporales de las variables de estado más significativas y parámetros del círculo evolutivo como son diámetro de giro, diámetro táctico, avance y transferencia. El plan de pruebas se basó en técnicas de Diseño de Experimentos “DOE” para racionalizar el número de corridas en diferentes condiciones de profundidad, velocidad y orientación del chorro (ángulo de timón). En el marco de la presente investigación y para minimizar los errores por efectos ambientales y por inexactitud en los instrumentos de medición, se desarrolló un sistema de adquisición y procesamiento de datos de acuerdo con los lineamientos de ITTC. La literatura existente describe los efectos negativos de la profundidad en los parámetros de maniobrabilidad de buques convencionales (Efecto tipo S), principalmente las trayectorias descritas en los círculos evolutivos aumentan en la medida que disminuye la profundidad; no obstante, en buques de alta relación manga-calado, B/T=7,51 (Yoshimura, y otros, 1.988) y B/T=6,38 (Yasukawa, y otros, 1.995) ha sido reportado el efecto contrario (Efecto tipo NS Non Standart). Este último efecto sin embargo, ha sido observado mediante experimentación con modelos a escala pero no ha sido validado en pruebas de buques a escala real. El efecto tipo NS en buques dotados con hélice y timones, se atribuye al mayor incremento de la fuerza del timón comparativamente con las fuerzas del casco en la medida que disminuye la profundidad; en el caso de estudio, el fenómeno está asociado a la mejor eficiencia de la bomba de agua “Pump-Jet”, debido a la resistencia añadida en el casco por efecto de la disminución de la profundidad. Los resultados de las pruebas con buque a escala real validan el excelente desempeño de esta clase de buques, cumpliendo en exceso los criterios de maniobrabilidad existentes y muestran que el diámetro de giro y otras características de maniobrabilidad mejoran con la disminución de la profundidad en buques con alta relación manga-calado. ABSTRACT The increasingly demanding requirements in terms of missions, operational and environmental constraints as well as new technologies, constantly impose challenges to naval architects to generate alternatives and asses their performance in the early stages of design. That is the case of Riverine Support Patrol Vessel (RSPV), designed and built by COTECMAR for the Colombian Navy. RSPV are riverine ships with a Beam-Draft ratio exceeding most of existing ships (B/T=9,5), mainly due to the restrictions in draft as a result of shallow water environment. The ships are equipped with azimuthal propulsion system of the “Pump-Jet” type. The peculiarities of the ship and the operational environment, characterized by tropical rivers of variable depth depending on the rain and dry seasons, as well as the lack channels and the effect of water current, make manoeuvrability and controllability fundamental to fulfill its mission; on the other hand, there are not validated mathematical models available to predict the manoeuvrability of such ships with the associated water depth effects in the early stages of design. This dissertation addresses the development of a mathematical model for shallow waters’ manoeuvrability simulation of ships with high Beam-Draft ratio and azimuthal propulsion systems type “Pump-Jet”, whose stream generates the thrust required by the ship to advance and also the steering force depending on the orientation angle, eliminating the need of rudders. The mathematical model has been validated with the results of RSPV’s full scale manoeuvring tests, through a comparison of paths, time series of state variables and other parameters taken from turning tests, such as turning diameter, tactical diameter, advance and transfer. The test plan was developed applying techniques of Design of Experiments “DOE”, in order to rationalize the number of runs in different conditions of water depth, ship speed and jet stream orientation (rudder angle). A data acquisition and processing system was developed, following the guidelines of ITTC, as part of this research effort, in order to minimize errors by environmental effects and inaccuracy in measurement instruments, The negative effects of depth on manoeuvrability parameters for conventional ships (Effect Type S: the path described by the ship during turning test increase with decrease of water depth), has been documented in the open literature; however for wide-beam ships, B/T=7,51 (Yoshimura, y otros, 1.988) and B/T=6,38 (Yasukawa, y otros, 1.995) has been reported the opposite effect (Type NS). The latter effect has been observed thru model testing but until now had not been validated with full-scale results. In ships with propellers and rudders, type NS effect is due to the fact that increment of rudder force becomes larger than hull force with decrease of water depth; in the study case, the phenomenon is associated with better efficiency of the Pump-Jet once the vessel speed becomes lower, due to hull added resistance by the effect of the decrease of water depth. The results of full scale tests validates the excellent performance of this class of ships, fulfilling the manoeuvrability criteria in excess and showing that turning diameter and other parameters in high beam-draft ratio vessels do improve with the decrease of depth.

Los recursos medioambientales aplicados a la arquitectura contemporánea en vivienda aislada

Objetivos. Análisis a través del prisma de la sostenibilidad, con un triple objetivo: consumo de energía, aspecto constructivo y recursos arquitectónicos, de algunos ejemplos destacados de vivienda aislada desde 1973, crisis del petróleo, hasta el cambio ideológico del 11 de septiembre de 2001. Emplazadas en microclimas semejantes en distintas latitudes, para extrapolar al clima mediterráneo. Ejemplos. Siete viviendas aisladas de distinto diseño conceptual, situadas en climas subtropicales, en ecosistemas variados pero de concepción medioambiental, constructiva y arquitectónica muy actual. Los ejemplos elegidos, por su intencionalidad, su diseño, y su sentido utilitario, constructivo y semiótico, se analizan desde el hecho acumulativo y el hecho reactivo, mediante el procedimiento de contrastar diversas fuentes de información. Objetivos. El análisis de cada una de las viviendas procedentes de diferentes arquitectos, se hace mediante la simulación de modelos que permitan describir la parte esencial del comportamiento de un sistema de interés, así como diseñar y realizar experimentos con el modelo para extraer conclusiones de sus resultados y apoyar la toma de decisiones proyectual. Procedimiento. En una primera fase, el medio natural queda definido por su localización, interpretación del lugar, el clima concreto (mediante climogramas generales y de isopletas), determinando un diagnóstico medioambiental para el establecimiento de estrategias a partir de los datos experimentales a contrastar con el resultado finalmente obtenido. En una segunda fase se eligen los casos más representativos de LowTech / LowEnergy y HighTech / HighEnergy. Se realiza un análisis del modelo, frente a uno de los elementos predominantes: sol, aire, agua, tierra, luna, vegetación y miscelánea. Resultados. De los casos estudiados se extraen principios aplicables en cada uno de los ámbitos: medioambiental, relacionados con la adaptabilidad energética; constructivo, en relación con la economía; y arquitectónico, vinculado con lo social, con una perspectiva diferente sobre los nuevos espacios vivibles. Conclusiones y relevancia. En los emplazamientos estudiados, los arquitectos herederos del movimiento moderno, han utilizado los recursos medioambientales pasivos y activos más actuales en cada uno de los elementos, así como la orientación, la ventilación, la radiación, la inercia térmica,…las actitudes más contemporáneas como expertos bioclimáticos. Los principios extraídos deben facilitar un proceso proyectual mediante pautas experimentales a desarrollar sin un uso desmesurado de la tecnología. Los principios y las conclusiones obtenidos servirán de aplicación a nuevos modelos conociendo los parámetros más relevantes. La modelización analógica - digital permitirá evaluar el comportamiento más aplicable según las necesidades a satisfacer. Objectives. Architectural analysis through the prism of sustainability with three aims: energy consumption, building technique and architectonical resources. The study is focused on some key examples of low density houses since 1973 (featured by the Oil crisis) until the 11th September 2001´s ideological change. These living spaces are settled in similar microclimates although in different latitudes with strong possibilities for applications in Mediterranean climates. Examples. Seven remote detached dwellings with different conceptual characters, located in subtropical climates, in different ecosystems, however with a sustainable basis and architectonical building concepts very updated. The cultural objects chosen, due to legitimate reasons such as: purpose, a plan, an utilitarian sense, constructive and semiotic, are analyzed under an accumulative perspective along with the reactive fact as the procedure to contrast and compare different sources of information. Goals. The analysis of the examples of different architects, will be done in order to simulate through models which describe and display the essential part of behaviour that corresponds to an interest system, along with the design and to try out or experiment with the model and to draw up results which support the projecting decision process. Procedure. On a first stage, the natural environment is shaped by its location, interpretation of the pace, a particular climate (through general climograms and isophlets), determining an environmental diagnosis which would be able to generate scientific conclusions in order to develop adequate strategies. Hence from experimental data we contrast with the results. On a second stage the more representative cases of LowTech / LowEnergy and HighTech / HighEnergy are choosen. We analyze the model taking into consideration and facing a key element: sun, air, water, soil, moon, vegetation and miscellany. Results. From the study cases we draw up applicable principles in each field: the ecological in relation with energetic adaptability, the constructive potential related with economy, and the social in relation with a different perspective about new architectural living spaces. Conclusions and Relevance. On those settlements studied, the heirs architects from Modern Movement, had used the passive and active, updated environmental resources in each element. For instance, aspects like orientation, ventilation, solar radiation, thermal inertia…, and the most contemporary attitude as bioclimatic expert that they are. These principles speed up through experimental guidelines, the technology is diminished and the design process be provided. The principles and conclusions generated will be useful in order to apply new models because we are able to know the most relevant key parameters. The analogical-digital modelizations allow us to revaluate the applicable behaviour according to the needs to satisfy.

En el límite de la arquitectura-paisaje : las Escuelas Nacionales de Arte de La Habana

it's been 50years since the world witnessed the triumph of one of the iast revoiutíons of the twentieth-century starring a group of bearded men who descended from the mountains of Cuba and who wouid end up overthrowing the Batista regime. Ricardo Porro was a Cuban architect exiied for his revoiutionary ideais. Vittorio Garatti and Roberto Gottardi were itaiian immigrant architects. The three coincided in the effervescent city of Caracas in the iate 50's within the circie of friends of Carios Raui de Viiianueva, who had at that tí me, finished one of his most significant works, the City University of Caracas. United by a common circie of friends, they wouid soon receive their dream assignment: an Academy ofArt for the chiidren of workers in the revoiutionary Havana. The idea was directiy based on the triumphant ideoiogist of the revoiutíon: Fidei Castro and Che Guevara. Aii schoois had to represent the image of the new society. They wouid immediateiy depart for Havana. The year was 1961 and they had oniy a few months to pian and carry out the project. The schoois were officiaiiy opened in 1965 without having been compieted. The set was iocated in the Goif Course Country Ciub of Havana. The iands- cape of the goif course and the understanding of the piace, by the three architects, was the origin of the projects. initíaiiy, they worked with some common principies that conditíoned its architecturai answer and gave the group the homogeneity of a singie project: the integratíon with the iandsca- pe, the same constructíon system and a singie materiai. This research anaiyzes the conditíons used by the three architects in order to investígate the responses from the point of view of architecturai design. Han pasado más de 50 años desde que el mundo contempló el triunfo de una de las últimas revoluciones del siglo XX, protagonizada por un grupo de barbudos que descendían de la sierra de Cuba y que acabaría con el derrocamiento del régimen de Batista. Ricardo Porro era un arquitecto cubano exiliado por sus ideales revolucionarios. Vittorio Garatt y Roberto Gottardi eran arquitectos italianos emigrantes. Los tres coincidieron en la efervescente Caracas de Anales de los años 50 en torno a la figura de Carlos Raúl de Villanueva que terminaba en esa época una de sus obras más significativas, la Ciudad Universitaria de Caracas. Unidos por un círculo común de amistades pronto recibirán el encargo soñado: una Academia de las Artes para los hijos de los trabajadores en La Habana revolucionaria. La idea partia directamente de los ideólogos triunfantes de la revolución: Fidel Castro y el Che Guevara. El conjunto de las escuelas tenía que representar la imagen de la nueva sociedad. Inmediatamente partirán rumbo a La Habana. Corría el año 1961 y dispo¬nían de unos pocos meses para proyectar y ejecutar las obras. Las escuelas fueron oficialmente inauguradas en 1965 sin haberse concluido. El conjunto se ubicó en el campo de golf del Country Club de La Habana. El paisaje del campo de golf y el entendimiento del lugar, por parte de los tres arquitectos, fue el origen de los proyectos. Trabajaron inicialmente con unas premisas comunes que condicionaron su respuesta arquitectónica y le dieron al conjunto la homogeneidad de un único proyecto: la integración con el paisaje, un mismo sistema constructivo y un único material. Este trabajo de investigación parte de los condicionantes a los que se enfrentaron los tres arquitectos para así analizar las respuestas dadas desde el punto de vista del proyecto arquitectónico.

Trajes espaciales: la vestimenta como proyecto arquitectónico

¿Qué son los TRAJES ESPACIALES? El término Trajes Espaciales da nombre al “equipo de inmersión” 1 necesario para garantizar las condiciones de habitabilidad en determinados entornos o circunstancias. En diferentes coyunturas sociales, políticas o ambientales el formato convencional de la arquitectura se vuelve limitado o poco eficaz. Determinadas configuraciones de “vida a la intemperie” 2, asociadas a necesidades de protección, energía, comunicación, socialización…, en situaciones de alta emancipación e itinerancia, solicitan una reflexión sobre la posible portabilidad, o más concretamente, sobre la idoneidad del uso 3 de las condiciones arquitectónicas. La tesis pretende acotar o definir un no reconocido ámbito de los recursos proyectuales del arquitecto dirigido a la confección de las más cercanas envolventes corporales entendidas como elementos arquitectónicos. Casa y vestimenta, citando a Marshall McLuhan, se identifican en un discurso que entiende ambas esferas como “extensiones de la piel” 4 que garantizan el control energético y la definición social del sujeto que las habita. En determinados momentos el arquitecto ha tenido que desestimar como principal herramienta de trabajo la construcción de edificios, para abordar ciertas demandas sociales. La tesis pretende demostrar cómo el diseño de trajes ha sido en ocasiones una estrategia proyectual del repertorio de la arquitectura. Su aportación es la de abordar el mundo de la vestimenta más allá del simple ejercicio estilístico, defendiendo estas construcciones como un elemento capaz de hacer habitable un determinado entorno. Este acercamiento ha permitido a los arquitectos ensayar en los trajes lo que posteriormente desarrollarían en sus edificios. Temas tratados por la arquitectura como higienismo, ornamento, estandarización, pliegue… han encontrado en la escala de la vestimenta su expresión más pura. El diseño de estos trajes, su pertinencia y su confección como parte del proyecto arquitectónico, conformará el hilo conductor de esta tesis. ABSTRACT The term spacesuits tries to define the “diving equipment” 5 necessary to ensure the living conditions in certain environments or circumstances. In specific social, political or environmental circumstances, the architectural standard format becomes limited or ineffective. Some configurations of “life outdoor” 6, associated with protection, energy, communication and socialization needs, in situations of high emancipation and roaming, seek a reflection on the possible portability, or more specifically, on the appropriateness of wearing the architectural features. The thesis aims to limit or define an unrecognized field from the resources of the architect focused on body emvelopes as architectural elements. House and clothing, quoting Marshall McLuhan, are matched in a speech that understand both spheres as “extensions of the skins” 7, to ensure energy control and social definition of the subject who inhabit them. At times, the architect has had to dismiss the construction of buildings as the main tool for working, to address certain social demands. The thesis aims to demonstrate how the costume design is sometimes a projectual strategy in the repertoire of architecture. Its contribution splits with Fashion as a mere stylistic exercise, defending the dress as an artefact capable of making livable a certain environment. This approach has allowed architects to explore at costumes what they develope in their buildings later. Topics covered by the architecture as hygienism, ornament, standardization, folding... have found in the scale of the dress its purest expression. The design of these suits, their techniques and their relevance as part of the architectural project, will form the core of this thesis.

Geometric tools in Juan de Álava's stonecutting workshop

Stonemasonry of the Gothic vault in its totality is based upon geometry of the line, whereas classic stereotomy relies on the comprehensive knowledge of the surface and the highly sophisticated sides of the voussoirs necessary for its vaults. It is obvious that this leap in the art of construction was paralleled and accompanied by an extension of the horizons of geometry. In Spain, it was made possible thanks to the centuries-old tradition of stone building begun in the most remote medieval times and to the presence of outstanding architects or stonemasons such as Juan de Álava, whose professional work surpassed the established limits and provided the art of building with new instruments.

Therapeutic metaphors in engineering: how to cure a building structure

Cognitive linguistics have conscientiously pointed out the pervasiveness of conceptual mappings, particularly as conceptual blending and integration, that underlie language and that are unconsciously used in everyday speech (Fauconnier 1997, Fauconnier & Turner 2002; Rohrer 2007; Grady, Oakley & Coulson 1999). Moreover, as a further development of this work, there is a growing interest in research devoted to the conceptual mappings that make up specialized technical disciplines. Lakoff & Núñez 2000, for example, have produced a major breakthrough on the understanding of concepts in mathematics, through conceptual metaphor and as a result not of purely abstract concepts but rather of embodiment. On the engineering and architecture front, analyses on the use of metaphor, blending and categorization in English and Spanish have likewise appeared in recent times (Úbeda 2001, Roldán 1999, Caballero 2003a, 2003b, Roldán & Ubeda 2006, Roldán & Protasenia 2007). The present paper seeks to show a number of significant conceptual mappings underlying the language of architecture and civil engineering that seem to shape the way engineers and architects communicate. In order to work with a significant segment of linguistic expressions in this field, a corpus taken from a widely used technical Spanish engineering journal article was collected and analysed. The examination of the data obtained indicates that many tokens make a direct reference to therapeutic conceptual mappings, highlighting medical domains such as diagnosing,treating and curing. Hence, the paper illustrates how this notion is instantiated by the corresponding bodily conceptual integration. In addition, we wish to underline the function of visual metaphors in the world of modern architecture by evoking parts of human or animal anatomy, and how this is visibly noticeable in contemporary buildings and public works structures.

La barrera del análisis estructural y la representación gráfica en el desarrollo de los proyectos arquitectónicos: el caso de la Ópera de Sidney

En numerosas ocasiones a lo largo de la historia la imaginación de los creadores ha ido por delante de las posibilidades técnicas de cada momento. Así, muchas de estas nuevas ideas han requerido largos periodos de tiempo para materializarse como realidad construida, hasta que el desarrollo tecnológico e industrial hubo alcanzado un grado de madurez suficiente. En el campo de la arquitectura, estas limitaciones técnicas se han ido acotando paulatinamente hasta desembocar en la situación actual en la que cualquier planteamiento formal puede ser representado gráficamente y analizado desde un punto de vista estructural, superádose de este modo la barrera existente históricamente en el tratamiento de las formas. A lo largo del presente tesis doctoral se analiza cómo la formulación del Método de los Elementos Finitos en la década de los cincuenta y las curvas de Bézier en la década de los sesenta del siglo pasado y la posterior generalización de los ordenadores personales y de los programas informáticos asociados (C.A.D. y F.E.M. principalmente) en los estudios de arquitectura e ingeniería a partir de la década de los noventa, posibilitó el desarrollo de cualquier propuesta arquitectónica, por compleja que ésta fuese, provocando una verdadera revolución a nivel formal en el mundo de la arquitectura, especialmente en el campo de la edificación singular o icónica. Se estudia este proceso a través de ocho edificios; cuatro anteriores y otros tantos posteriores a la desaparición de la barrera anteriormente referida, establecida de forma simbólica en la década de los años ochenta del siglo XX: Frontón de Recoletos en Madrid, Edificio Seagram en Nueva York, Habitat ’67 en Montreal, Ópera de Sídney, museo Guggenheim de Bilbao, ampliación del Victoria & Albert Museum en Londres, tanatorio “Meiso no Mori” en Gifu y nueva sede de la CCTV en Pekín. De entre ellos, la Ópera de Sídney, obra del arquitecto danés Jørn Utzon, condensa gran parte de los aspectos relevantes investigados en relación a la influencia que los métodos de representación y análisis estructural ejercen en la concepción y construcción de las obras de arquitectura. Por este motivo y por considerarse un hito de la arquitectura a nivel global se toma como caso de estudio. La idea general del edificio, que data de 1956, se enmarca en una época inmediatamente anterior a la del desarrollo científico y tecnológico anteriormente referido. Esta ausencia de herramientas de diseño disponibles acordes a la complejidad formal de la propuesta planteada condicionó enormente la marcha del proyecto, dilatándose dramáticamente en el tiempo y disparándose su coste hasta el punto de que el propio arquitecto danés fue separado de las obras antes de su conclusión. Además, la solución estructural finalmente construida de las cubiertas dista mucho de la prevista por Utzon inicialmente. Donde él había imaginado unas finas láminas de hormigón flotando sobre el paisaje se materializó una estructura más pesada, formada por costillas pretensadas de hormigón con unas secciones notablemente mayores. La forma también debió ser modificada de modo ostensible respecto a la propuesta inicial. Si este edificio se pretendiese construir en la actualidad, con toda seguridad el curso de los acontecimientos se desarrollaría por senderos muy diferentes. Ante este supuesto, se plantean las siguientes cuestiones: ¿sería posible realizar un análisis estructural de la cubierta laminar planteada por Utzon inicialmente en el concurso con las herramientas disponibles en la actualidad?; ¿sería dicha propuesta viable estructuralmente?. A lo largo de las siguientes páginas se pretende dar respuesta a estas cuestiones, poniendo de relieve el impacto que los ordenadores personales y los programas informáticos asociados han tenido en la manera de concebir y construir edificios. También se han analizado variantes a la solución laminar planteada en la fase de concurso, a través de las cuales, tratando en la medida de lo posible de ajustarse a las sugerencias que Ove Arup y su equipo realizaron a Jørn Utzon a lo largo del dilatado proceso de proyecto, mejorar el comportamiento general de la estructura del edificio. Por último, se ha pretendido partir de cero y plantear, desde una perspectiva contemporánea, posibles enfoques metodológicos aplicables a la búsqueda de soluciones estructurales compatibles con la forma propuesta originalmente por Utzon para las cubiertas de la Ópera de Sídney y que nunca llegó a ser construida (ni analizada), considerando para ello los medios tecnológicos, científicos e industriales disponibles en la actualidad. Abstract On numerous occasions throughout history the imagination of creators has gone well beyond of the technical possibilities of their time. Many new ideas have required a long period to materialize, until the technological and industrial development had time to catch up. In the architecture field, these technical limitations have gradually tightened leading to the current situation in which any formal approach can be represented and analyzed from a structural point of view, thus concluding that the structural analysis and the graphical representation’s barrier in the development of architectural projects has dissappeared. Throughout the following pages it is examined how the development of the Finite Element Method in the fifties and the Bezier curves in the sixties of the last century and the subsequent spread of personal computers and specialized software in the architectural and engineering offices from the nineties, enabled the development of any architectural proposal independently of its complexity. This has caused a revolution at a formal level in architecture, especially in the field of iconic building. This process is analyzed through eight buildings, four of them before and another four after the disappearance of the above mentioned barrier, roughly established in the eighties of the last century: Fronton Recoletos in Madrid, Seagram Building in New York Habitat '67 in Montreal, Sydney Opera House, Guggenheim Museum Bilbao, Victoria & Albert Museum extension in London, Crematorium “Meiso no Mori” in Gifu and the new CCTV headquarters in Beijing. Among them, the Sydney Opera House, designed by Danish architect Jørn Utzon, condenses many of the main aspects previously investigated regarding the impact of representation methods and structural analysis on the design and construction of architectural projects. For this reason and also because it is considered a global architecture milestone, it is selected as a case study. The building’s general idea, which dates from 1956, is framed at a time immediately preceding the above mentioned scientific and technological development. This lack of available design tools in accordance with the proposal’s formal complexity conditioned enormously the project’s progress, leading to a dramatic delay and multiplying the final budget disproportionately to the point that the Danish architect himself was separated from the works before completion. Furthermore, the built structure differs dramatically from the architect’s initial vision. Where Utzon saw a thin concrete shell floating over the landscape a heavier structure was built, consisting of prestressed concrete ribs with a significantly greater size. The geometry also had to be modified. If this building were to built today, the course of events surely would walk very different paths. Given this assumption, a number of questions could then be formulated: Would it be possible to perform a structural analysis of Utzon’s initially proposed competition-free-ways roof’s geometry with the tools available nowadays?; Would this proposal be structurally feasable?. Throughout the following pages it is intended to clarify this issues, highlighting personal computers and associated software’s impact in building design and construction procedures, especially in the field of iconic building. Variants have also been analyzed for the laminar solution proposed in the competition phase, through which, trying as far as possible to comply with the suggestions that Ove Arup and his team did to Jørn Utzon along the lengthy process project, improving the overall performance of the building structure. Finally, we have started from scratch and analyzed, from a contemporary perspective, possible structural solutions compatible with Utzon’s Opera House’s original geometry and vision –proposal that was never built (nor even analyzed)-, taking into consideration the technological, scientific and industrial means currently available.

Acrobats in the rooftops of Tehran

This paper seeks to analyze the political dimension of the body, and consequently the inherently political dimension of space, through the instrumental notion of situation, understood as an spatio-temporal mesh configured by bodies, practices and discourses. The political understood as the potential for action (or non-action) underlying the individual body, implies a renewed definition of a landscape that results from the body’s doing. Landscape becomes a multiple corporeality, a field of relations in which we discover ourselves enmeshed, not just placed; a field in which the limit is not frontier but bond and common dimension. A disquieting ambiguous zone appears there where the individual spatiality is born out of the body through the actualization of its political potential and entangles with others to constitute a common spatiality, political action of the multitude. The article is organized through the description of a back-and-forth movement between the revolts of Tehran in 2009 and the Iranian revolution of 1979. Also, a detour into the works of Robert Morris and Trisha Brown is required in order to understand the link between the body and the constitution of a common spatiality.

Teaching in Landscape

“We, the landscape architects, concerned with the future development of our landscapes in a fast changing world, believe that everything, influencing the way in which the outdoor environment is created, used, and maintained is fundamental to sustainable development and human well-being. We, being responsible for the improvement of the education of future landscape architects to enable them to work for a sustainable environment within the context of our natural and cultural heritage”. (IFLA/UNESCO 2005) CHARTER FOR LANDSCAPE ARCHITECTURAL EDUCATION) Nowadays, respect and appreciation of the landscape sustainably grow. Landscape Architecture professionals are makers encourage and guide this growth. However, there is still no legal recognition of the landscape profession in Spain. For this reason we present this paper that shows the current framework in which appear a professional educated with masters and specialized courses, but it lacks a defined work area and unique in its business learned. We present the demands of both IFLA and the EFLA and teaching lines proposed by these organizations at European level are distinguished. Furthermore, we analyze the national scene and major training centres are distinguished.