Emissions from realistic operation of residential wood pellets heating systems

Emissions from residential combustion appliances vary significantly depending on the firing behaviours and combustion conditions, in addition to combustion technologies and fuel quality. Although wood pellet combustion in residential heating boilers is efficient, the combustion conditions during start-up and stop phases are not optimal and produce significantly high emissions such as carbon monoxide and hydrocarbon from incomplete combustion. The emissions from the start-up and stop phases of the pellet boilers are not fully taken into account in test methods for ecolabels which primarily focus on emissions during operation on full load and part load. The objective of the thesis is to investigate the emission characteristics during realistic operation of residential wood pellet boilers in order to identify when the major part of the annual emissions occur. Emissions from four residential wood pellet boilers were measured and characterized for three operating phases (start-up, steady and stop). Emissions from realistic operation of combined solar and wood pellet heating systems was continuously measured to investigate the influence of start-up and stop phases on total annual emissions. Measured emission data from the pellet devices were used to build an emission model to predict the annual emission factors from the dynamic operation of the heating system using the simulation software TRNSYS. Start-up emissions are found to vary with ignition type, supply of air and fuel, and time to complete the phase. Stop emissions are influenced by fan operation characteristics and the cleaning routine. Start-up and stop phases under realistic operation conditions contribute 80 – 95% of annual carbon monoxide (CO) emission, 60 – 90% total hydrocarbon (TOC), 10 – 20% of nitrogen oxides (NO), and 30 – 40% particles emissions. Annual emission factors from realistic operation of tested residential heating system with a top fed wood pelt boiler can be between 190 and 400 mg/MJ for the CO emissions, between 60 and 95 mg/MJ for the NO, between 6 and 25 mg/MJ for the TOC, between 30 and 116 mg/MJ for the particulate matter and between 2x10-13 /MJ and 4x10-13 /MJ for the number of particles. If the boiler has the cleaning sequence with compressed air such as in boiler B2, annual CO emission factor can be up to 550 mg/MJ. Average CO, TOC and particles emissions under realistic annual condition were greater than the limits values of two eco labels. These results highlight the importance of start-up and stop phases in annual emission factors (especially CO and TOC). Since a large or dominating part of the annual emissions in real operation arise from the start-up and stop sequences, test methods required by the ecolabels should take these emissions into account. In this way it will encourage the boiler manufacturers to minimize annual emissions. The annual emissions of residential pellet heating system can be reduced by optimizing the number of start-ups of the pellet boiler. It is possible to reduce up to 85% of the number of start-ups by optimizing the system design and its controller such as switching of the boiler pump after it stops, using two temperature sensors for boiler ON/OFF control, optimizing of the positions of the connections to the storage tank, increasing the mixing valve temperature in the boiler circuit and decreasing the pump flow rate. For 85 % reduction of start-ups, 75 % of CO and TOC emission factors were reduced while 13% increase in NO and 15 % increase in particle emissions was observed.

Research of wood fuel market in Ukraine and the Republic of Belarus

The goal of the present work was to describe the wood fuel market of Ukraine and the Republic of Belarus, to estimate wood fuel potential and to research opportunities of wood fuel trading. Nowadays the wood waste, wood residues and by-products are becoming more and more potential raw materials for energy production. Against the background of unstable prices of traditional energy sources and environmental degradation, European States are planning to get 12% of energy from alternative sources already in 2010. Wastes of wood-working and agricultural productions are such sources. At present time the most popular wood biofuels are wood pellets, briquettes, wood chips and logs. Ukraine and the Republic of Belarus have a rather big potential of wood fuel resources. But wood fuels markets of these countries are on the entry level and quite disorganized. There is almost no domestic usage of wood biofuel. All produced pellets, briquettes as well as wood chips and logs go to the export, but the volumes are not high at present time. Ukraine and the Republic of Belarus have a very suitable geographical location. The most promising directions of wood fuel trading are developed wood fuel markets of Northern countries, Austria, Germany as well as actively developing markets of Poland and Hungary. At the long distance truck and sea transportation are the most appropriate. At a short distance cheap transportation by rail is more suitable. Thereby export is a potential opportunity for development of wood fuel production and in the future for usage in the researched countries.

Wood pellet markets in Russia

Bioenergy came to Russia through wood pellets. On account of prevalence of oil and gas in the Russian economy «bioenergy» has come with a great delay. Certainly, there were many woodworking enterprises and even municipal boiler-houses using wood waste and fire wood for energy reception, but this activity was not purposeful. More likely it was connected with necessity of waste recycling and with the organization of heat supply in the remote areas of the country. However, in 2001 was founded the first pellet plant in Russia. The purpose of this work was to analyze wood pellets market in Russia, investigate current situation on the home and export market, evaluates supply and demand development, opportunities for wood pellets manufactures in Russia, the main manufactures in Russian market; cost and prices for wood pellets in Russia. Also the work was intended to give better understanding of the main problems of wood pellets industry in Russia. Besides, this work had updated information about Russian customs and logistic systems.

Methodology for identifying parameters for the TRNSYS model Type 210 -wood pellet stoves and boilers

This report describes a method how to perform measurements on boilers and stoves and how to identify parameters from the measurements for the boiler/stove-model TRNSYS Type 210. The model can be used for detailed annual system simulations using TRNSYS. Experience from measurements on three different pellet stoves and four boilers were used to develop this methodology. Recommendations for the set up of measurements are given and the re-quired combustion theory for the data evaluation and data preparation are given. The data evalua-tion showed that the uncertainties are quite large for the measured flue gas flow rate and for boilers and stoves with high fraction of energy going to the water jacket also the calculated heat rate to the room may have large uncertainties. A methodology for the parameter identification process and identified parameters for two different stoves and three boilers are given. Finally the identified models are compared with measured data showing that the model generally agreed well with meas-ured data during both stationary and dynamic conditions.

Pellets de madeira e sua viabilidade econômico-financeira na substituição do óleo BPF-A1 em pequenos e médios consumidores no Estado de São Paulo

A utilização de pellets de madeira é bastante difundida nos países desenvolvidos, em particular na Europa, e apresenta demanda crescente para a produção de energia elétrica e térmica, incluindo a calefação residencial. O Brasil apresenta capacidade indiscutível para a geração de diferentes biomassas e em quantidades expressivas, dada à vantagem competitiva de suas condições edafo-climáticas, sua extensão territorial e de ter baixos custos de produção. Apontar-se-á neste trabalho as condições mercadológicas, logísticas, normativas, de incentivos fiscais e de ambiente econômico, com as quais o país poderá se consolidar como um grande produtor e consumidor desta fonte de energia limpa e renovável. Este estudo apresenta as melhores técnicas conhecidas para a venda a pequenos e médios consumidores e para a produção, eficiente e com escala, de pellets de madeira, dentro do Estado de São Paulo. É discutida a necessidade de se ter florestas plantadas com o único propósito de serem transformadas em pellets. Nos últimos anos, os preços dos resíduos de madeira subiram no mercado interno, praticamente os excluindo como fonte de matéria-prima, num cenário de longo prazo. O objetivo final desta dissertação é apresentar os principais aspectos econômico-financeiros que influenciam os cenários para que os pellets de madeira possam substituir o óleo BPF-A1 no mercado regional, e assim discutindo se sua produção se mostrará atraente e confiável para potenciais investidores. Para a avaliação da viabilidade financeira, são utilizados os métodos-chave, Payback, Valor Presente Líquido e Taxa Interna de Retorno, e uma análise de sensibilidade das principais variáveis identificadas. Os principais resultados revelam um Payback de 47 meses, um NPV de R$10.942.127 e uma IRR de 25,18% a.a. em termos reais, para o cenário-base, além de identificar o preço da matéria-prima e a escala de produção como as variáveis mais sensíveis.

Caracterização química, física e térmica de pellets de madeira produzidos no Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de pellets de madeira no Brasil : estratégia, custo e risco do investimento

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Florestal, Programa de Pós-Graduação em Ciências Florestais, 2015.

Solid and liquid biofuels markets in Finland - a study on international biofuels trade

This study considered the current situation of solid and liquid biofuels markets and international biofuels trade in Finland and identified the challenges ofthe emerging international biofuels markets for Finland. The fact that industryconsumes more than half of the total primary energy, widely applied combined heat and power production (CHP) and a high share of biofuels in the total energy consumption are specific to the Finnish energy system. One third of the electricity is generated in CHP plants. As much as 27% of the total energy consumption ismet by using wood and peat, which makes Finland the leading country in the use of biofuels. Finland has made a commitment to maintain greenhouse gas emissions at the 1990 level at the highest during the period 2008-2012. The Finnish energypolicy aims to achieve the target, and a variety of measures are taken to promote the use of renewable energy sources and especially wood fuels. In this study, the wooden raw material streams of the forest industry were included the international biofuels trade in addition to biomass streams that are traded for energy production. In 2004, as much as 45% of the raw wood importedinto Finland ended up in energy production. The total international trading of biofuels was evaluated at 72 PJ, of which the majority, 58 PJ, was raw wood. About 22% of wood based energy in Finland originated from imported raw wood. Tall oil and wood pellets composed the largest export streams of biofuels. The annual turnover of international biofuels trade was estimated at about ¤ 90 million fordirect trade and at about ¤ 190 million for indirect trade. The forest industryas the biggest user of wood, and the producer and user of wood fuels has a central position in biomass and biofuels markets in Finland. Lately, the international aspects of Finnish biofuels markets have been emphasised as the import of rawwood and the export of wood pellets have increased. Expanding the use of biofuels in the road transportation sector would increase the international streams ofbiofuels in Finland. In coming years, the international trading of biomass for energy purposes can be expected to continue growing.

Pientalon teknisen tilan tuotteistus

Diplomityön tavoitteena on selvittää asiakkaiden toiveita ja arvostuksia, joiden avulla voidaan rakentaa silta teknisiin ominaisuuksiin ja niiden variointiin. Rinnakkaisena työnä lähinnä teknisestä näkökulmasta teki Lauri Manninen omaa tutkimustyötä. Tässä raportissa on teknisiä ominaisuuksia käsiteltäessä lainattu Mannisen työtä. Pientaloa suunniteltaessa on valittava mm. lämmitysjärjestelmä ja talotekniikan taso. Suomessa pientaloihin on tarjolla useita lämmitysjärjestelmävaihtoehtoja. Tunnetuimpia päälämmönlähteitä ovat maa, puu, pelletti, öljy, kaasu, sähkö ja kaukolämpö. Lämmitysjärjestelmän lisäksi teknisiin tiloihin sijoitetaan muuta talotekniikkaa. Tässä diplomityössä tarkastellaan eri lämmitysjärjestelmien nykytilannetta sekä mahdollisuuksien mukaan tulevaisuuden näkymiä. Työssä on käytetty lähdeaineistona kirjallisuutta, www-sivuja sekä haastatteluja. Työhön on haastateltu yksityisasiakkaita. Lämmitysjärjestelmien nykytilanteen ja tulevaisuuden näkymien sekä haastatteluissa esiin tulleiden asioiden avulla on pyritty kehittämään talotekniikkamarkkinoille uusia tuote- ja palvelukonsepteja. Diplomityössä on käsitelty lämmitysjärjestelmiä sekä talotekniikkaa markkinatilanteen ja asiakkaiden näkökulmasta. Tuloksena työssä esitetään alustava tuotteistussuunnitelma ja ideoita teknisen tilan kokonaispalvelun tuotteistamiseen.

Puupellettien tuotanto-, jakelu- ja käyttöketjun tekniikka, talous ja markkinat

Puupelletti on puumurskeesta puristamalla valmistettu polttoainejaloste, jonka raaka- aineita ovat mekaanisen metsäteollisuuden sivutuotteet kutterinlastu ja sahanpuru. Sylinterin muotoiset pelletit ovat yleensä halkaisijaltaan 6-10 mm ja pituudeltaan 10 - 30 mm. Tässä diplomityössä tarkastellaan pellettiketjua valmistuksesta loppukäyttöön. Työ sisältää valmistuksen, kuljetuksen ja käytön niin tekniset puolet, kuin taloudelliset näkökohdatkin. Myös muiden maiden pellettimarkkinoiden tilanne tuodaan esille. Työn lopussa kuvataan muutama case-esimerkki onnistuneista pellettiketjuista. Suomessa puupellettimarkkinoiden kehitys alkoi 1998 Vöyrissä auenneen pellettitehtaan myötä. Pellettien tuotanto ja kulutus ovat sen jälkeen kasvaneet nopeasti ja nyt vuonna 2001 pellettien tuotantokapasiteetti on 150 000 t/a. Pellettimarkkinoiden nopea kehitys Suomessa perustuu öljyn korkeaan hintaan, käytön helppouteen ja ympäristöystävällisyyteen. Käyttölaitteistojen yleistyessä ja jakelun tehostuessa pellettiliiketoiminta tulee vahvistamaan asemaansa entisestään Suomessa

Puupellettien soveltuvuus energiantuotantoon

Puupelletit ovat mekaanisen puunjalostusteollisuuden sivutuotteista valmistettua puupuristetta, jota käytetään pääasiallisesti lämmityspolttoaineena. Suomessa puupellettien käyttö on ollut toistaiseksi vähäistä. Pellettien käyttö on Euroopassa suurinta Ruotsissa, jossa pellettiliiketoiminta on viime vuosina kasvanut voimakkaasti. Puupellettituotantolaitoksia on maahamme perustettu viime aikoina useita ja lisäksi hankkeita on vireillä. Työ on muodoltaan soveltuvuustutkimus, Feasibility Study. Työssä selvitetään puupellettien tuotannon ja käytön tekniikkaa sekä taloutta. Työssä kartoitetaan myös puupellettiliiketoiminnan laajenemisen mahdollisia esteitä ja selvitetään mahdollisuuksia puupellettiliiketoiminnan kasvulle Suomessa.

IEA Bioenergy Task 40 “Sustainable International Bioenergy Trade: Securing supply and demand” Country report of Finland 2008

This study considered the current situation of biofuels markets in Finland. The fact that industry consumes more than half of the total primary energy, widely applied combined heat and power production and a high share of solid biomass fuels in the total energy consumption are specific to the Finnish energy system. Wood is the most important source of bioenergy in Finland, representing 21% of the total energy consumption in 2006. Almost 80% of the wood-based energy is recovered from industrial by-products and residues. Finland has commitment itself to maintaining its greenhouse gas emissions at the 1990 level, at the highest, during the period 2008–2012. The energy and climate policy carried out in recent years has been based on the National Energy and Climate introduced in 2005. The Finnish energy policy aims to achieve the target, and a variety of measures are taken to promote the use of renewable energy sources and especially wood fuels. In 2007, the government started to prepare a new long-term (up to the year 2050) climate and energy strategy that will meet EU’s new targets for the reduction of green house gas emissions and the promotion of renewable energy sources. The new strategy will be introduced during 2008. The international biofuels trade has a substantial importance for the utilisation of bioenergy in Finland. In 2006, the total international trading of solid and liquid biofuels was approximately 64 PJ of which import was 61 PJ. Most of the import is indirect and takes place within the forest industry’s raw wood imports. In 2006, as much as 24% of wood energy was based on foreignorigin wood. Wood pellets and tall oil form the majority of export streams of biofuels. The indirect import of wood fuels increased almost 10% in 2004–2006, while the direct trade of solid and liquid biofuels has been almost constant.

Market of biomass fuels in Finland : IEA Bioenergy Task 40 and EUBIONET III - Country report of Finland 2009

This study considered the current situation of solid and liquid biomass fuels in Finland. The fact that industry consumes more than half of the total primary energy, widely applied combined heat and power production and a high share of solid biomass fuels in the total energy consumption are specific to the Finnish energy system. Wood is the most important source of bioenergy in Finland, representing 20% of the total energy consumption in 2007. Almost 80% of the woodbased energy is recovered from industrial by-products and residues. As a member of the European Union, Finland has committed itself to the Union’s climate and energy targets, such as reducing its overall emissions of green house gases to at least 20% below 1990 levels by 2020, and increasing the share of renewable energy in the gross final consumption. The renewable energy target approved for Finland is 38%. The present National Climate and Energy Strategy was introduced in November 2008. The strategy covers climate and energy policy measures up to 2020, and in brief thereafter, up to 2050. In recent years, the actual emissions have exceeded the Kyoto commitment and the trend of emissions is on the increase. In 2007, the share of renewable energy in the gross final energy consumption was approximately 25% (360 PJ). Without new energy policy measures, the final consumption of renewable energy would increase to 380 PJ, which would be approximately only 31% of the final energy consumption. In addition, green house gas emissions would exceed the 1990 levels by 20%. Meeting the targets will need the adoption of more active energy policy measures in coming years. The international trade of biomass fuels has a substantial importance for the utilisation of bioenergy in Finland. In 2007, the total international trading of solid and liquid biomass fuels was approximately 77 PJ, of which import was 62 PJ. Most of the import is indirect and takes place within the forest industry’s raw wood imports. In 2007, as much as 21% of wood energy was based on foreign-origin wood. Wood pellets and tall oil form the majority of export streams of biomass fuels. The indirect import of wood fuels peaked in 2006 to 61 PJ. The foreseeable decline in raw wood import to Finland will decrease the indirect import of wood fuels. In 2004– 2007, the direct trade of solid and liquid biomass fuels has been on a moderate growth path. In 2007, the import of palm oil and export of bio-diesel emerged, as a large, 170 000 t/yr biodiesel plant came into operation in Porvoo.

Puupelletin hybridipoltto

Diplomityö on tehty osana laajempaa kehitysprojektia. Kehitysprojektin tavoitteena on kehittää poltin jossa polttoaineena käytetään kevyt polttoöljyä ja puupellettiä. Työ on jaettu kahteen osioon, kirjallisuus- ja tutkimusosioon. Kirjallisuusosiossa on käsitelty kehitystyön pohjana käytettyä teoriatietoa. Tutkimusosassa esitellään laitteistolle tehdyt savukaasumittaukset.

Corrosion behaviour of boiler tube materials during combustion of fuels containing Zn and Pb

Många förbränningsanläggningar som bränner utmanande bränslen såsom restfraktioner och avfall råkar ut för problem med ökad korrosion på överhettare och/eller vattenväggar pga. komponenter i bränslena som är korrosiva. För att minimera problemen i avfallseldade pannor hålls ångparametrarna på en relativt låg nivå, vilket drastiskt minskar energiproduktionen. Beläggningarna i avfallseldade pannor består till största delen av element som är förknippade med högtemperaturkorrosion: Cl, S, alkalimetaller, främst K och Na, och tungmetaller som Pb och Zn, och det finns också indikationer av Br-förekomst. Det låga ångtrycket i avfallseldade pannor påverkar också stålrörens temperatur i pannväggarna i eldstaden. I dagens läge hålls temperaturen normalt vid 300-400 °C. Alkalikloridorsakad (KCl, NaCl) högtemperaturkorrosion har inte rapporterats vara relevant vid såpass låga temperaturer, men närvaro av Zn- och Pb-komponenter i beläggningarna har påvisats förorsaka ökad korrosion redan vid 300-400 °C. Vid förbränning kan Zn och Pb reagera med S och Cl och bilda klorider och sulfater i rökgaserna. Dessa tungmetallföreningar är speciellt problematiska pga. de bildar lågsmältande saltblandningar. Dessa lågsmältande gasformiga eller fasta föreningar följer rökgasen och kan sedan fastna eller kondensera på kallare ytor på pannväggar eller överhettare för att sedan bilda aggressiva beläggningar. Tungmetallrika (Pb, Zn) klorider och sulfater ökar risken för korrosion, och effekten förstärks ytterligare vid närvaro av smälta. Motivet med den här studien var att få en bättre insikt i högtemperaturkorrosion förorsakad av Zn och Pb, samt att undersöka och prediktera beteendet och motståndskraften hos några stålkvaliteter som används i överhettare och pannväggar i tungmetallrika förhållanden och höga materialtemperaturer. Omfattande laboratorie-, småskale- och fullskaletest utfördes. Resultaten kan direkt utnyttjas i praktiska applikationer, t.ex. vid materialval, eller vid utveckling av korrosionsmotverkande verktyg för att hitta initierande faktorer och förstå deras effekt på högtemperaturkorrosion.