Conditions to ensure the 2-D characteristic polynomial of uncertain matrix is very strict Hurwitz

This article derives some new conditions for the bivariate characteristic
polynomial of an uncertain matrix to be very strict Hurwitz. The uncertainties are assumed of the structured and unstructured type. Using the two-dimensional inverse Laplace transform, we derive the bounds on the uncertainties, which will ensure that the bivariate characteristic polynomial is very strict Hurwitz. Two numerical examples are given to illustrate the results.

Stability of 2-D characteristic polynomials

This paper derives some new conditions for the bivariate characteristic polynomial of an uncertain matrix to be very strict Hurwitz. The uncertainties are assumed of the structured and unstructured type. By using the two-dimensional (2-D) inverse Laplace transform, the bounds on the uncertainties are derived which will ensure that the bivariate characteristic polynomial to be very strict Hurwitz. Two numerical examples are given to illustrate the results.

Développement des méthodes de stabilisation pour la conception des circuits hyperfréquences : application à l'optimisation d'un amplificateur de puissance spatial

209 p. : graf.

Torlojutze sekuentzien optimizazioa elementu finituen bidez Offshore aplikazioetan.

[EU]Gradu Amaierako Lan honetan offshore presiopeko hodien (gasa nahiz petrolioa garraiatzen duten hodien) brida bidezko loturetako torlojutze sekuentziak aztertuko dira. Aplikazio hauek suposatzen duten inbertsio ekonomikoa dela eta, ihesak ekiditeko asmoz, ezinbestekoa da brida hauek elkarri lotzeko dituzten torlojuen kargak uniformeki bananduta egotea torloju guztietan, interakzio elastikoak eta pibotamendu mugimenduak helburu hori zailtzen badute ere. Gaur egun torlojutze sekuentziak ASME-k araututa baldin baditu ere, ez dira batere erosoak, torloju guztiak ordena zehatz batean estutu behar direlako, eta estutze hauek ez direlako egoerarik erosoenetan egiten, denbora asko galduz. Horregatik, sinpletasuna lortzeko eta denbora eta dirua aurrezteko, torlojutze sekuentzia horiek optimizatzea izango da helburu nagusia. Aipaturiko lana aurrera eramateko, bi brida modeloren torlojutze analisiak egin beharko dira, berauek parametro batzuen menpe jarrita, estutze sekuentzietan duten eragina ikusi ahal izateko.

Diseño de recintos blindados para gammagrafía industrial.

[ES]El proyecto incluido en este trabajo de fin de grado trata sobre el diseño de una instalación blindada para realización de gammagrafía industrial. Para poder realizar este ensayo es necesario un escudo que haga frente a la radiación de manera efectiva, con el fin de reducir la posibilidad de daños en la salud de aquellos individuos que se encuentren en las inmediaciones. Para calcular el espesor necesario se usará el software MCNPX, herramienta para el estudio de interacción de radiación con la materia. Debido a la naturaleza invisible e indetectable por medios naturales son necesarios unos protocolos de uso muy estrictos y grandes medidas de seguridad con la finalidad de evitar problemas de salud o accidentes

Galactose Metabolism in Saccharomyces cerevisiae

Galactose is metabolised to the more metabolically useful glucose 6-phosphate by the enzymes of the Leloir pathway. This pathway is necessary as the initial enzymes of glycolysis are unable to recognise galactose. In most organisms, including Saccharomyces cerevisiae, five enzymes are required to catalyse the conversion: galactose mutarotase, galactokinase, galactose 1-phosphate uridyltransferase, UDP-galactose 4-epimerase and phosphoglucomutase. The pathway has attracted interest in S. cerevisiae as it is under very strict genetic control and thus provides an excellent model for the study of gene expression in eukaryotes. In the presence of glucose the genes encoding the Leloir pathway enzymes (the GAL genes) are completely repressed through the action of a transcription factor Mig1p. Only in the presence of galactose and the absence of glucose do the concerted actions of Gal4p, Gal80p and Gal3p enable the rapid and high level activation of the GAL genes. The exact mechanism of action of these three proteins is controversial. Galactose metabolism in S. cerevisiae is also of interest because it can be exploited both in the laboratory (for high level expression of heterologous proteins and in the yeast two hybrid screen) and industrially (increasing flux through the Leloir pathway in order to make more efficient use of feedstocks with high galactose content). Recent work on the structures of the various proteins, their mechanisms of action and attempts to gain an integrated understanding of transcriptional and metabolic events will assist our understanding of both the fundamental biochemical processes and how these might be exploited commercially.

"Educar é transformar o Mundo..." : lógicas de ação num colégio privado

Relatório de estágio de mestrado, Ciências da Educação (Administração Educacional), Universidade de Lisboa, Instituto de Educação, 2012

Grinding of hardened steels using optimized cooling

Grinding - the final machining process of a workpiece - requires large amounts of cutting fluids for the lubrication, cooling and removal of chips. These fluids are highly aggressive to the environment. With the technological advances of recent years, the worldwide trend is to produce increasingly sophisticated components with very strict geometric and dimensional tolerances, good surface finish, at low costs, and particularly without damaging the environment. The latter requirement can be achieved by recycling cutting fluids, which is a costly solution, or by drastically reducing the amount of cutting fluids employed in the grinding process. This alternative was investigated here by varying the plunge velocity in the plunge cylindrical grinding of ABNT D6 steel, rationalizing the application of two cutting fluids and using a superabrasive CBN (cubic boron nitride) grinding wheel with vitrified binder to evaluate the output parameters of tangential cutting force, acoustic emission, roughness, roundness, tool wear, residual stress and surface integrity, using scanning electron microscopy (SEM) to examine the test specimens. The performance of the cutting fluid, grinding wheel and plunge velocity were analyzed to identify the best machining conditions which allowed for a reduction of the cutting fluid volume, reducing the machining time without impairing the geometric and dimensional parameters, and the surface finish and integrity of the machined components.

Argentine convertibility: is it a relevant precedent for the dollarization process in Ecuador?

Includes bibliography

Engineering Active Pharmaceutical Ingredients by Spray Drying: Effects on Physical Properties and In Vitro Dissolution

Active pharmaceutical ingredients have very strict quality requirements; minor changes in the physical and chemical properties of pharmaceuticals can adversely affect the dissolution rate and therefore the bioavailability of a given drug. Accordingly, the aim of the present study was to investigate the effect of spray drying on the physical and in vitro dissolution properties of four different active pharmaceutical ingredients, namely carbamazepine, indomethacin, piroxicam, and nifedipine. Each drug was dispersed in a solution of ethanol and water (70:30) and subjected to single-step spray drying using similar operational conditions. A complete characterization of the spray-dried drugs was performed via differential scanning calorimetry (DSC), scanning electron microscopy (SEM), X-ray powder diffraction (XRPD), particle size distribution analysis, solubility analysis, and an in vitro dissolution study. The results from the thermal analysis and X-ray diffraction showed that, except for carbamazepine, no chemical modifications occurred as a result of spray drying. Moreover, the particle size distribution of all the spray-dried drugs significantly decreased. In addition, SEM images showed that most of the particles had an irregular shape. There was no significant improvement in the solubility of the spray-dried drugs compared with the unprocessed compounds; however, in general, the dissolution rates of the spray-dried drugs showed a remarkable improvement over their non-spray-dried counterparts. Therefore, the results from this study demonstrate that a single spray-drying step may lead to changes in the physical properties and dissolution characteristics of drugs and thus improve their therapeutic action.

Relationship of vasodilator-induced changes in myocardial oxygenation with the severity of coronary artery stenosis: a study using oxygenation-sensitive cardiovascular magnetic resonance

Aims To explore the impact of the functional severity of coronary artery stenosis on changes in myocardial oxygenation during pharmacological vasodilation, using oxygenation-sensitive cardiovascular magnetic resonance (OS-CMR) imaging and invasive fractional flow reserve (FFR). An FFR is considered a standard of reference for assessing haemodynamic relevance of coronary artery stenosis; yet, the relationship of FFR to changes in myocardial oxygenation during vasodilator stress and thus to an objective marker for ischaemia on the tissue level is not well understood. Methods and results We prospectively recruited 64 patients with suspected/known coronary artery disease undergoing invasive angiography. The FFR was performed in intermediate coronary artery stenosis. OS-CMR images were acquired using a T2*-sensitive sequence before and after adenosine-induced vasodilation, with myocardial segments matched to angiography. Very strict image quality criteria were defined to ensure the validity of results. The FFR was performed in 37 patients. Because of the strict image quality criteria, 41% of segments had to be excluded, leaving 29/64 patients for the blinded OS-CMR analysis. Coronary territories with an associated FFR of <0.80 showed a lack of increase in myocardial oxygenation [mean signal intensity (ΔSI) −0.49%; 95% confidence interval (CI) −3.78 to 2.78 vs. +7.30%; 95% CI 4.08 to 10.64; P < 0.001]. An FFR of <0.54 best predicted a complete lack of a vasodilator-induced oxygenation increase (sensitivity 71% and specificity 75%). An OS-CMR ΔSI <4.78% identified an FFR of <0.8 with a sensitivity of 86% and specificity of 92%. Conclusion An FFR of <0.80 is associated with a lack of an adenosine-inducible increase in oxygenation of the dependent coronary territory, while a complete lack of such an increase was best predicted by an FFR of <0.54. Further studies are warranted to identify clinically meaningful cut-off values for FFR measurements and to assess the utility of OS-CMR as an alternative clinical tool for assessing the functional relevance of coronary artery stenosis.

Selectively filled photonic liquid crystal fibers = Fibras de cristal fotónico selectivamente llenas con cristal líquido

El presente trabajo de Tesis se ha centrado en el diseño, fabricación y caracterización de dispositivos basados en fibras de cristal fotónico infiltrado selectivamente con cristales líquidos, polímeros y una mezcla de ambos. Todos los dispositivos son sintonizables, y su área de aplicación se centra en comunicaciones ópticas y sensores. La manipulación y fusionado de fibras fotónicas, el llenado selectivo de determinadas cavidades y la alineación recíproca de fibras mantenedoras de polarización son tareas muy específicas y delicadas para las que se requieren protocolos muy estrictos. Previo a la fabricación de dispositivos ha sido necesaria por tanto una tarea de sistematización y creación de protocolos de fabricación. Una vez establecidos se ha procedido a la fabricación y caracterización de dispositivos. Los dispositivos fabricados se enumeran a continuación para posteriormente detallar una a una las singularidades de cada uno. • Interferómetros intermodales hechos a partir de una porción de fibra fotónica soldada entre dos fibras estándar, bien monomodo o PANDA (mantenedora de polarización). Estos interferómetros han sido sumergidos o bien llenados selectivamente con cristales líquidos para así sintonizar la señal interferométrica guiada a través de la fibra. • Infiltración de fibras fotónicas con cristales líquidos colestéricos con especial énfasis en la fase azul (blue phase) de estos materiales. Las moléculas de cristal líquido se autoalinean en volumen por lo que la infiltración de fibras fotónicas con estos cristales líquidos es muy interesante, pues es conocida la dificultad de alinear apropiadamente cristales líquidos dentro de cavidades micrométricas de las fibras fotónicas. • Grabación de redes holográficas de forma selectiva en las cavidades de una fibra fotónica. Estas redes holográficas, llamadas POLICRYPS (POlymer-LIquid CRYstal-Polymer Slices), son redes fabricadas a base de franjas de polímero y cristal líquido alineado perpendicularmente a dichas franjas. Las franjas son a su vez perpendiculares al eje de la fibra como lo puede ser una red de Bragg convencional. El cristal líquido, al estar alineado perpendicularmente a dichos franjas y paralelo al eje de la fibra, se puede conmutar aplicando un campo eléctrico externo, modificando así el índice efectivo de la red. Se puede fabricar por lo tanto una red de Bragg sintonizable en fibra, muy útil en comunicaciones ópticas. • Llenado selectivo de fibras fotónicas con polidimetilsiloxano (PDMS), un polímero de tipo silicona. Si se realiza un llenado selectivo asimétrico se puede inducir birrefringencia en la fibra. El índice de refracción del PDMS tiene una fuerte dependencia térmica, por lo que se puede sintonizar la birrefringencia de la fibra. • Estudio teórico de llenado selectivo de fibras fotónicas con PDMS dopado con nanopartículas de plata de 5, 40 y 80 nm. Estas nanopartículas poseen un pico de absorción en torno a los 450 nm debido a resonancias superficiales localizadas de plasmones (LSPR). La resonancia del plasmon tiene una fuerte dependencia con el índice de refracción del material colindante, y al ser éste PDMS, la variación de índice de refracción se ve amplificada, obteniendo una absorción sintonizable. Se ha propuesto la fabricación de polarizadores sintonizables usando esta técnica. Como ya se ha dicho, previamente a la fabricación ha sido necesaria la protocolización de diversos procedimientos de fabricación de alta complejidad, así como protocolizar el proceso de toma de medidas para optimizar los resultados. Los procedimientos que han requerido la formulación de protocolos específicos han sido los siguientes: • Llenado selectivo de cavidades en una fibra fotónica. Dichas fibras tienen generalmente un diámetro externo de 125 μm, y sus cavidades son de entre 5 y 10 μm de diámetro. Se han desarrollado tres técnicas diferentes para el llenado/bloqueado selectivo, pudiéndose combinar varios protocolos para la optimización del proceso. Las técnicas son las siguientes: o Llenado y bloqueado con un prepolímero. Dicho prepolímero, también llamado adhesivo óptico, está inicialmente en estado líquido y posee una cierta viscosidad. Las cavidades de la fibra fotónica que se desea llenar o bloquear poseen un diámetro diferente al resto, por lo que en el proceso de llenado aparecen dos frentes de llenado dependientes de su diámetro. A mayor diámetro, mayor velocidad de llenado. Polimerizando cuando existe dicha diferencia en los frentes se puede cortar por medio, obteniendo así una fibra parcialmente bloqueada. o Colapsamiento de las cavidades de menor diámetro mediante aplicación de calor. El calor producido por un arco voltaico de una soldadora de fibra estándar fusiona el material exterior de la fibra produciendo el colapsamiento de las cavidades de menor diámetro. En esta técnica también es necesaria una diferencia de diámetros en las cavidades de la fibra. o Bloqueo una a una de las cavidades de la fibra fotónica con adhesivo óptico. Este procedimiento es muy laborioso y requiere mucha precisión. Con este sistema se pueden bloquear las cavidades deseadas de una fibra sin importar su diámetro. • Alineación de una fuente de luz linealmente polarizada con una fibra mantenedora de polarización ya sea PANDA o fotónica. Así mismo también se han alineado entre sí fibras mantenedoras de polarización, para que sus ejes rápidos se fusionen paralelos y así el estado de polarización de la luz guiada se mantenga. • Sistematización de toma de medidas para caracterizar los interferómetros modales. Éstos son altamente sensibles a diversas variables por lo que el proceso de medida es complejo. Se deben aislar variables de forma estrictamente controlada. Aunque todos los dispositivos tienen en común el llenado selectivo de cavidades en una fibra fotónica cada dispositivo tiene sus peculiaridades, que van a ser explicadas a continuación. ABSTRACT The present Thesis has been centered in the design, fabrication and characterization of devices based on photonic crystal fibers selectively filled with liquid crystals, polymers and a mixture of both. All devices are tunable and their work field is optical communications and sensing The handling and splicing of photonic crystal fibers, the selective filling of their holes and the aligning of polarization maintaining fibers are very specific and delicate tasks for which very strict protocols are required. Before the fabrication of devices has therefore been necessary task systematization and creation of manufacturing protocols. Once established we have proceeded to the fabrication and characterization of devices. The fabricated devices are listed below and their peculiarities are detailed one by one: • Intermodal interferometers made with a portion of photonic crystal fiber spliced between two optical communication fiber pigtails, either single mode or PANDA (polarization-maintaining) fiber. These interferometers have been submerged or selectively filled with liquid crystals to tune the interferometric guided signal. • Infiltration of photonic fibers with cholesteric liquid crystals with special emphasis on their blue phase (blue phase). The liquid crystal molecules are self-aligning in volume so the infiltration of photonic fibers with these liquid crystals is very interesting. It is notoriously difficult to properly align liquid crystals within micron cavities such as photonic fibers. • Selectively recording of holographic gratings in the holes of photonic crystal fibers. These holographic gratings, called POLICRYPS (POlymer-LIquid CRYstal-Polymes Slices), are based on walls made of polymer and liquid crystal aligned perpendicular to them. These walls are perpendicular to the axis of the fiber as it can be a conventional Bragg grating. The liquid crystal is aligned perpendicular to the walls and parallel to the fiber axis, and can be switched by applying an external electric field and thus change the effective index of the grating. It is thus possible to manufacture a tunable Bragg grating fiber, useful in optical communications. •Asymmetrically selective filling of photonic crystal fibers with a silicone polymer like called polydimethylsiloxane (PDMS) to induce birefringence in the fiber. The refractive index of PDMS has temperature dependence, so that the birefringence of the fiber can be tuned. • Theoretical study of photonic crystal fibers selectively filled with PDMS doped with silver nanoparticles of 5, 40 and 80 nm. These nanoparticles have an absorption peak around 450 nm due to localized surface plasmon resonances (LSPR). Plasmon resonance has a strong dependence on the refractive index of the adjacent material, and as this is PDMS, the refractive index variation is amplified, obtaining a tunable absorption. Fabrication of tunable polarizers using this technique has been proposed. Before starting the fabrication, it has been necessary to optimize several very delicate procedures and different protocols have been designed. The most delicate procedures are as follows: • Selective filling of holes in a photonic crystal fiber. These fibers generally have an outer diameter of 125 μm, and their holes have a diameter around between 5 and 10 μm. It has been developed three different techniques for filling / selective blocking, and they can be combined for process optimization. The techniques are: o Filling and blocked with a prepolymer. This prepolymer also called optical adhesive is initially in liquid state and has a certain viscosity. The holes of the photonic crystal fiber that are desired to be filled or blocked should have a different diameter, so that in the filling process appear two different fronts depending on the hole diameter. The holes with larger diameter are filled faster. Then the adhesive is polymerized when there is such a difference on the front. A partially blocked fiber is obtained cutting between fronts. o Collapsing of holes of smaller diameter by application of heat. The heat produced by an arc of a standard fusion splicer fuses the outer fiber material producing the collapsing of the cavities of smaller diameter. In this technique also you need a difference of diameters in the fiber holes. o Blocking one by one the holes of photonic crystal fiber with optical adhesive. This procedure is very laborious and requires great precision. This system can block unwanted cavities regardless fiber diameter. • Aligning a linearly polarized light source with a polarization-maintaining fiber (either a PANDA fiber as a photonic crystal fiber). It is needed also an aligning between polarization-maintaining fibers, so that their fast axes parallel merge and that is state of polarization of light guided is maintained. • Systematization of taking measurements to characterize the modal interferometers. These are highly sensitive to several variables so the measurement process is very complicated. Variables must be fixed in a very controlled manner. Although all devices have the common characteristic of being selectively filled PCFs with some kind of material, each one has his own peculiarities, which are explained below.

Saving the Monopsony: Exclusivity, Innovation and Market Power in the Media Sector. Research Papers in Law, 7/2006

From the Introduction. The Media Sector has experienced a technological revolution in the last 15 years. Digital encoding of television signals made possible a more efficient use of the radiospectrum. Digital terrestrial television (hereinafter, “DTT”) allows now for the reception of a significant number of free-to-air channels.1 Moreover, the use of new transmission platforms (hereinafter,“platforms”), namely cable and direct-to-home satellite (hereinafter, “DTH”) paved the way for the arrival in Europe of pay-TV operators, which finance their activities mainly via subscription fees. This changing technological landscape is subject to further evolution in the near future, as incumbent telecommunications operators become increasingly interested in making available broadcasting content2 as part of their broadband offer and 3G mobile handsets can be used for the reception of TV signals....The present paper seeks to ascertain whether the Commission “regulatory approach” towards the exclusive sale of premium content is a sound one, in particular in view of the constant technological evolution outlined above. The assumptions underlying landmark Commission decisions will be compared with recent developments of the media sector in Italy. In the NewsCorp./Telepiù case, decided in 2003, the Commission imposed very strict conditions to allow the merger giving birth to Sky Italia, on the assumption that the operation created a lasting near-monopsony in the different upstream markets for the acquisition of premium intervened against the media conglomerate Mediaset (which controls, inter alia, the main three private free-to-air channels in Italy) for an alleged abuse of dominant position.17 In fact, and contrary to the forecasts made by the Commission, Mediaset was in a position to acquire the broadcasting rights of the main Italian football teams, thereby excluding the incumbent (and near-monopolist) pay-TV operator, Sky Italia. This may go to show that the reality of the sector is more complex and evolves faster than one may infer from the Commission practice, thus putting into question its stance regarding exclusivity. The experience of the evolution of the Italian media sector will be used as the starting point for the evaluation of alternative regulatory options.

Patenting Strategies of the EU Pharmaceutical Industry -Crossroad between Patent Law and Competition Policy. Research Papers in Law, 1/2011

From the Introduction. The pharmaceutical sector inquiry carried out by the European Commission in 2008 provides a useful framework for assessing the relationship between the patent system on the one hand and competition policy and law on the other hand. The pharmaceutical market is not only specifically regulated. It is also influenced by the special characteristics of the patent system which enables pharmaceutical companies engaged in research activities to enter into additional arrangements to cope with the competitive pressures of early patent application and the delays in drug approval. Patents appear difficult to reconcile with the need for sufficient and adequate access to medicines, which is why competition expectations imposed on the pharmaceutical sector are very high. The patent system and competition law are interacting components of the market, into which they must both be integrated. This can result in competition law taking a very strict view on the pharmaceutical industry by establishing strict functional performance standards for the reliance on intellectual property rights protection granted by patent law. This is in particular because in this sector the potential welfare losses are not likely to be of only monetary nature. In brief, the more inefficiencies the patent system produces, the greater the risk of an expansive application of competition law in this field. The aim of the present study is to offer a critical and objective view on the use or abuse of patents and defensive strategies in the pharmaceutical industry. It shall also seek to establish whether patents as presently regulated offer an appropriate degree of protection of intellectual property held by the economic operators in the pharmaceutical sector and whether there is a need or, for that matter, scope for improvement. A useful starting point for the present study is provided by the pharmaceutical sector competition inquiry (hereafter “the sector inquiry”) carried out by the European Commission during the first half of 2008. On 8 July 2008, the Commission adopted its Final Report pursuant to Article 17 of Regulation 1/2003 EC, revealing a series of “antitrust shortcomings” that would require further investigation1.

The Ultimate Secrecy: Feminist Readings of Masculine Trauma in Vietnam War Literature

It is a widely acknowledged and often unquestioned fact that patriarchy and its modes of behaviour and social organization favour the appearance of trauma on the weakest (and defenceless) members of society: women. In the last decades, trauma seems to have taken the baton of typically female maladies such as 19th c. hysteria or 20th c. madness. Feminists in the 20th c. have long worked to prove the connection between the latter affections (and their reflection in literary texts) and patriarchal oppression or expectations of feminine behaviour and accordance to roles and rules. With Trauma Studies on the rise, the approach to the idea of the untold as related to femininity is manifold: on the one hand, is not trauma, which precludes telling about one’s own experience and keeps it locked not only from the others, but also from ourselves, the ultimate secrecy? On the other hand, when analyzing works that reflect trauma, one is astounded by the high number of them with a female protagonist and an almost all-female cast: in this sense, a ‘feminist’ reading is almost compulsory, in the sense that it is usually the author’s assumption that patriarchal systems of exploitation and expectations favour traumatic events and their outcome (silence and secrets) on the powerless, usually women. Often, traumatic texts combine feminism with other analytical discourses (one of the topics proposed for this panel): Toni Morrison’s study of traumatic responses in The Bluest Eye and Beloved cannot be untangled from her critique of slavery; just as much of Chicana feminism and its representations of rape and abuse (two main agents of trauma) analyze the nexus of patriarchy, new forms of post-colonialism, and the dynamics of power and powerlessness in ethnic contexts. Within this tradition that establishes the secrecies of trauma as an almost exclusively feminine characteristic, one is however faced with texts which have traumatized males as protagonists: curiously enough, most of these characters have suffered trauma through a typically masculine experience: that of war and its aftermath. By analyzing novels dealing with war veterans from Vietnam or the Second World War, the astounding findings are the frequent mixture of masculine or even ‘macho’ values and the denial of any kind of ‘feminine’ characteristics, combined with a very strict set of rules of power and hierarchy that clearly establish who is empowered and who is powerless. It is our argument that this replication of patriarchal modes of domination, which place the lowest ranks of the army in a ‘feminine’ situation, blended with the compulsory ‘macho’ stance soldiers are forced to adopt as army men (as seen, for example, in Philip Caputo’s Indian Country, Larry Heinemann’s Paco’s Story or Ed Dodge’s DAU: A Novel of Vietnam) furthers the onset and seriousness of ulterior trauma. In this sense, we can also analyze this kind of writing from a ‘feminist’ point of view, since the dynamics of über-patriarchal power established at the front at war-time deny any display of elements traditionally viewed as ‘feminine’ (such as grief, guilt or emotions) in soldiers. If trauma is the result of a game of patriarchal empowerment, how can feminist works, not only theoretical, but also fictional, overthrow it? Are ‘feminine’ characteristics necessary to escape trauma, even in male victims? How can feminist readings of trauma enhance our understanding of its dynamics and help produce new modes of interaction that transcend power and gender division as the basis for the organization of society?