Maintenance Strategies for used equipment under lease

Abstract: Purpose – The aim of this research is to determine the optimal upgrade and preventive maintenance actions that minimize the total expected cost (maintenance costs+penalty costs). Design/methodology/approach – The problem is a four-parameter optimization with two parameters being k-dimensional. The optimal solution is obtained by using a four-stage approach where at each stage a one-parameter optimization is solved. Findings – Upgrading action is an extra option before the lease of used equipment, in addition to preventive maintenance action. Upgrading action makes equipment younger and preventive maintenance action lowers the ROCOF. Practical implications – There is a growing trend towards leasing equipment rather than owning it. The lease contract contains penalties if the equipment fails often and repairs are done within reasonable time period. This implies that the lessor needs to look at optimal preventive maintenance strategies in the case of new equipment lease, and upgrade actions plus preventive maintenance in the case of used equipment lease. The paper deals with this topic and is of great significant to business involved with leasing equipment. Originality/value – Nowadays many organizations are interested in leasing equipment and outsourcing maintenance. The model in this paper addresses the preventive maintenance problem for leased equipment. It provides an approach to dealing with this problem.

Estudo relativo à utilização dos Equipamentos de Medida e Precisão (EMP) nas ações de manutenção da frota F-16

Esta dissertação foi realizada, tendo como objecto de estudo a utilização de equipamentos de Medida e Precisão, em diversas áreas da manutenção da Base Aérea Nº 5. Como hipótese de trabalho, no âmbito da dissertação do Mestrado de Engenharia Instrumentação e Metrologia, foi proposta a elaboração de um estudo, tendo em vista, uma melhoria das capacidades da organização demonstrar certos requisitos no âmbito da gestão e controlo de equipamentos de Medida e Precisão. Assim, a metodologia utilizada para a realização desta dissertação, partiu da análise do estado da arte nas normas internacionais, da regulamentação emitida pela Força Aérea Portuguesa e no estudo das práticas em uso na manutenção da Base Aérea Nº 5, assim como, nos atuais meios de execução e controlo dessa gestão num sistema integrado de “gestão de conteúdos”. Foram realizados diversos trabalhos, tendo como objectivo uma melhoria no processo de gestão de Equipamentos de Medida e Precisão, com resultados imediatos, tais como um novo portal de metrologia, e-mail de informação sobre Equipamentos de Medida e Precisão e certificados digitais. Seguidamente, forma apresentados os resultados do estudo e demonstrada a necessidade de implementar um processo de recall, para as acções onde são usados Equipamentos de Medida e precisão. Na dissertação, são utilizadas terminologias aeronáuticas, por as mesmas serem comuns no seio da organização, assim como, consonantes com a prática usual na indústria de manutenção aeronáutica militar no mundo.

When zero doesn't mean it and other geomathematical mischief

There is almost not a case in exploration geology, where the studied data doesn’tincludes below detection limits and/or zero values, and since most of the geological dataresponds to lognormal distributions, these “zero data” represent a mathematicalchallenge for the interpretation.We need to start by recognizing that there are zero values in geology. For example theamount of quartz in a foyaite (nepheline syenite) is zero, since quartz cannot co-existswith nepheline. Another common essential zero is a North azimuth, however we canalways change that zero for the value of 360°. These are known as “Essential zeros”, butwhat can we do with “Rounded zeros” that are the result of below the detection limit ofthe equipment?Amalgamation, e.g. adding Na2O and K2O, as total alkalis is a solution, but sometimeswe need to differentiate between a sodic and a potassic alteration. Pre-classification intogroups requires a good knowledge of the distribution of the data and the geochemicalcharacteristics of the groups which is not always available. Considering the zero valuesequal to the limit of detection of the used equipment will generate spuriousdistributions, especially in ternary diagrams. Same situation will occur if we replace thezero values by a small amount using non-parametric or parametric techniques(imputation).The method that we are proposing takes into consideration the well known relationshipsbetween some elements. For example, in copper porphyry deposits, there is always agood direct correlation between the copper values and the molybdenum ones, but whilecopper will always be above the limit of detection, many of the molybdenum values willbe “rounded zeros”. So, we will take the lower quartile of the real molybdenum valuesand establish a regression equation with copper, and then we will estimate the“rounded” zero values of molybdenum by their corresponding copper values.The method could be applied to any type of data, provided we establish first theircorrelation dependency.One of the main advantages of this method is that we do not obtain a fixed value for the“rounded zeros”, but one that depends on the value of the other variable.Key words: compositional data analysis, treatment of zeros, essential zeros, roundedzeros, correlation dependency

Liiketoimintasuunnitelma - käytetyn koneen kunnostustehdas

Tämä diplomityö sisältää suunnitelman liiketoiminnasta, joka perustuu käytettyjen työkoneiden tehdasmaiseen kunnostamiseen. Työn alkuosa keskittyy taustatekijöihin, jotka ovat vaikuttaneet tutkimuksen tarpeellisuuteen. Lähtökohtana on ollut löytää ratkaisu huonokuntoisten käytettyjen koneiden myynnin nopeuttamiseksi. Työssä käsitellään myös liiketalouden teoriaa, joka liittyy läheisesti liiketoimintaan yleisesti sekä liiketoimintasuunnitelman laatimiseen. Loppuosa työtä sisältää liiketoimintasuunnitelman, joka sisältää kuvauksen liikeideasta, liiketoiminnasta, tuotteista ja potentiaalisista asiakassegmenteistä. Näiden lisäksi suunnitelma sisältää myös markkinointisuunnitelman tuotteille ja toimintasuunnitelman tehtaan käynnistämiseksi, sekä analyysin toimintaanliittyvistä riskeistä. Tehtaan toiminnasta on tehty myös kannattavuuslaskelmat,joiden keskeiset tunnusluvut sisältyvät työhön. Näiden lukujen ja riskianalyysien avulla on mahdollista arvioida tehdashankkeen käynnistämisen järkevyyttä ja siihen liittyviä riskejä. Työn tavoitteena on antaa lukijalleen selkeä kuva kunnostustehtaan toiminnasta, tuotteiden myynnistä, asiakkaista, sekä kannattavuudesta. Lisäksi lukija saa hyvän kuvan tehdasmaisen kunnostamisen tuomista eduista, sekä vastaavasti myös sen toteuttamiseen liittyvistä ongelmista.

Regional Data Transmission Network

The globalization and development of an information society promptly change shape of the modern world. Cities and especially megacities including Saint-Petersburg are in the center of occuring changes. As a result of these changes the economic activities connected to reception and processing of the information now play very important role in economy of megacities what allows to characterize them as "information". Despite of wide experience in decision of information questions Russia, and in particular Saint-Petersburg, lag behind in development of information systems from the advanced European countries. The given master's thesis is devoted to development of an information system (data transmission network) on the basis of wireless technology in territory of Saint-Petersburg region within the framework of FTOP "Electronic Russia" and RTOP "Electronic Saint-Petersburg" programs. Logically the master's thesis can be divided into 3 parts: 1. The problems, purposes, expected results, terms and implementation of the "Electronic Russia" program. 2. Discussion about wireless data transmission networks (description of technology, substantiation of choice, description of signal's transmission techniques and types of network topology). 3. Fulfillment of the network (organization of central network node, regional centers, access lines, description of used equipment, network's capabilities), financial provision of the project, possible network management models.

Intuboidun hengityslaitehoitoa saavan aikuisen tehohoitopotilaan suunhoidon kirjaaminen

Tutkimuksen tarkoituksena oli tutkia potilastietojärjestelmien suunhoitosivut kaikilla suomalaisilla teho-osastoilla, joissa oli käytössä Clinisoft® -potilastietojärjestelmä ja, joilla hoidettiin intuboituja, hengityslaitehoitoa saavia aikuisia tehohoitopotilaita. Lisäksi tutkimuksessa analysoitiin yhden yliopistosairaalan teho-osaston hoitajien suunhoidon kirjauksia potilastietojärjestelmän vuorohuomioraporteista. Tutkimusosion 1 aineisto koostui aikuispotilaita hoitavien teho-osastojen (N=15) Clinisoft® -potilastietojärjestelmien suunhoitosivuista. Tutkimusosion 2 aineisto koostui yhden yliopistosairaalan teho-osaston intuboitujen, hengityslaitehoitoa saaneiden aikuisen tehohoitopotilaiden suunhoidon kirjauksista (n=97). Vuonna 2008–2009 hoidetuista intuboiduista, hengityslaitehoitoa saaneista tehohoitopotilaista (N=1180) valittiin satunnaisotannalla 100 potilasta, joiden suunhoitoon liittyvät potilasasiakirjat otettiin mukaan analyysiin. Aineistot analysoitiin sisällön erittelyllä. Suunhoitosivujen aihesisällöistä muodostettiin 14 sisältöluokkaa. Vuorohuomiokirjaukset oli kirjattu yleensä hengitys tai happeutuminen otsakkeiden alle, josta löytyi yhteensä 589 alkuperäislausumaa. Hoitajat kirjasivat ensin potilaan hengityslaitehoidosta ja happeutumisesta. Alkuperäislausumista tehohoitopotilaan suunhoitoon liittyviä lausumia oli 61 % (n=357). Vuorohuomiokirjauksista muodostettiin 11 sisältöluokkaa. Potilastietojärjestelmän suunhoitosivujen rakenne ei ohjannut VAP:a ehkäisevään suunhoitoon ja tehohoitopotilaan suunhoitoa kirjattiin usealle sivulle. Kaikkien tehohoito-osastojen suunhoitosivupohjissa oli kohdat suun kunnon arvioinnille ja suunhoidolle, mutta sivuilta ei aina selvinnyt tehohoito-osaston suunhoitoon käytättämiä välineitä. Sivuissa oli nähtävissä yksittäisiä VAP:n ehkäisyyn liittyviä interventioita. Vuorohuomioraportteihin kirjaaminen oli päällekkäistä suunhoitosivuun kirjattavien tietojen kanssa. Hoitajat kirjasivat tehohoitopotilaan hengityslaitehoidosta ja potilaan happeutumisesta. Suunhoidosta hoitajat kirjasivat eniten eritteiden määrää ja laatua ja vähiten suunhoidossa käytetyistä välineistä sekä suunhoitoon liittyvästä arvioinnista. Tehohoitopotilaan suuta hoidettiin keskimäärin 2.93 kertaa vuorokaudessa, eniten aamuvuoroissa. Suun kuntoa arvioitiin 1.12 kertaa vuorokaudessa. Pro gradu -tutkielma tuo uutta tietoa intuboidun, hengityslaitehoidossa olevan aikuisen tehohoitopotilaan näyttöön perustuvasta suunhoidosta, potilastietojärjestelmien suunhoitosivujen rakenteesta ja tehohoitopotilaan suunhoidon kirjaamisesta Suomessa. Tutkimustulosten ja kansainvälisten suositusten avulla kehitettiin Clinisoft® -potilastietojärjestelmän mallisivu tehohoitopotilaan suunhoidon tarpeen määrittämisen, suunnittelun, toteutuksen ja arvioinnin tueksi.

When zero doesn't mean it and other geomathematical mischief

There is almost not a case in exploration geology, where the studied data doesn’t includes below detection limits and/or zero values, and since most of the geological data responds to lognormal distributions, these “zero data” represent a mathematical challenge for the interpretation. We need to start by recognizing that there are zero values in geology. For example the amount of quartz in a foyaite (nepheline syenite) is zero, since quartz cannot co-exists with nepheline. Another common essential zero is a North azimuth, however we can always change that zero for the value of 360°. These are known as “Essential zeros”, but what can we do with “Rounded zeros” that are the result of below the detection limit of the equipment? Amalgamation, e.g. adding Na2O and K2O, as total alkalis is a solution, but sometimes we need to differentiate between a sodic and a potassic alteration. Pre-classification into groups requires a good knowledge of the distribution of the data and the geochemical characteristics of the groups which is not always available. Considering the zero values equal to the limit of detection of the used equipment will generate spurious distributions, especially in ternary diagrams. Same situation will occur if we replace the zero values by a small amount using non-parametric or parametric techniques (imputation). The method that we are proposing takes into consideration the well known relationships between some elements. For example, in copper porphyry deposits, there is always a good direct correlation between the copper values and the molybdenum ones, but while copper will always be above the limit of detection, many of the molybdenum values will be “rounded zeros”. So, we will take the lower quartile of the real molybdenum values and establish a regression equation with copper, and then we will estimate the “rounded” zero values of molybdenum by their corresponding copper values. The method could be applied to any type of data, provided we establish first their correlation dependency. One of the main advantages of this method is that we do not obtain a fixed value for the “rounded zeros”, but one that depends on the value of the other variable. Key words: compositional data analysis, treatment of zeros, essential zeros, rounded zeros, correlation dependency

Caracterização da estrutura molecular e propriedades viscográficas de amidos de mandioca (Manihot esculenta Crantz) para aplicações industriais

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Analise de defeitos em motores através de vibração mecânica: estudo de caso

Revolving machines are among the most used equipment in general industry and therefore expenditures on this equipment class are a significant portion of the total amount spent by the company. If there is an unscheduled stop of some of this equipment, industrial plants can lose huge amounts of money caused by interrupted production and parts delay. Others may increase significantly maintenance costs due to consequences elsewhere not affected before. Even plant and people safety can be in danger if there is an operation interruption without a backup system start. This work is focused on a rotating system case study which is monitored by vibration analysis that shows that is possible to determine when is the most appropriate time for equipment intervention without any reliability loss just by using a simple and cheap system which is not much used because professionals are not aware to its utility. Industrial facilities were evaluated by fail detection and historical analysis in some equipment in order to show feasibility of vibration analysis through a before-during-after process. The plant evaluated is part of a chemical multinational located in Guaratinguetá-SP. At this time, that plant had around 650 critical equipment monthly monitored and no unscheduled shutdown was registered in one year period due to equipment monitoring

Desenvolvimento de sistema eletrônico para instrumentar um DPL em ensaio dinâmico de resistência do solo

Pós-graduação em Engenharia Elétrica - FEIS

Orange and mango byproducts: agro-industrial waste as source of bioactive compounds and botanical versus commercial description: a review

Vegetal origin agro-industrial wastes are seen as a problem since the beginning of the industrial processes; however, they are becoming attractive as raw material for numerous purposes such as active enzymes and in the molecule bioprospecting area. Moreover, it is difficult to understand what the studied residue is consisted of in studies on agro-industrial waste, since the wastes names and constituents may vary according to the used equipment, as for waste from orange and mango processing. Thus, defining a specific waste, including comparisons between botanical and industrial descriptions, can help in understanding studies about wastes. The current review sought to contextualize such a scenario by gathering definitions, relevant information and studies on agro-industrial wastes and by-products, international enzymes market, and recent studies on bioactive compounds. In this context, waste from orange and mango are interesting because of the expression of these fruits on the world market; moreover, the processing does not include steps that could disrupt these biomolecules.

Freio eletrodinamométrico usando um inversor de frequência e um motor de indução trifásico

Considering that the Brazilian energy source is based on hydroelectric power plants, every moment that it does not rain enough, we are likely to suffer power outage. Making the rational use of energy not only is wise, but also important for financial issues. The industrial sector is of great importance to Brazilian economic context, because it is one that creates more wealth and jobs. It should be noted that it is one of the sectors that consume more electricity. One of the most used equipment in industry is the three phase induction motor, which ends up providing significant waste of energy. For that reasons, studying three phase induction motors is important. One of the ways to evaluate the parameter of the three phase induction motor is using a dynamometer mechanic or electric. This work aims at further studies (and development) of electrodynamometer brake, a type of electrical dynamometer, that is the only one with reversible use. This means, it is possible to measure both the torque and the power transmitted by the electric motors, by the direct method and the indirect. Besides it allows greater stability in the imposition of charges, due to its nature of being able to regenerate the energy imparted by the engines being tested

Freio eletrodinamométrico usando um inversor de frequência e um motor de indução trifásico

Considering that the Brazilian energy source is based on hydroelectric power plants, every moment that it does not rain enough, we are likely to suffer power outage. Making the rational use of energy not only is wise, but also important for financial issues. The industrial sector is of great importance to Brazilian economic context, because it is one that creates more wealth and jobs. It should be noted that it is one of the sectors that consume more electricity. One of the most used equipment in industry is the three phase induction motor, which ends up providing significant waste of energy. For that reasons, studying three phase induction motors is important. One of the ways to evaluate the parameter of the three phase induction motor is using a dynamometer mechanic or electric. This work aims at further studies (and development) of electrodynamometer brake, a type of electrical dynamometer, that is the only one with reversible use. This means, it is possible to measure both the torque and the power transmitted by the electric motors, by the direct method and the indirect. Besides it allows greater stability in the imposition of charges, due to its nature of being able to regenerate the energy imparted by the engines being tested

Sistema de monitorado de ruido de aviones basado en PC

Este proyecto surge por la problemática ocasionada por elevadas cantidades de ruido ambiental producido por aviones en sus operaciones cotidianas como despegue, aterrizaje o estacionamiento, que afecta a zonas pobladas cercanas a recintos aeroportuarios. Una solución para medir y evaluar los niveles producidos por el ruido aeronáutico son los sistemas de monitorado de ruido. Gracias a ellos se puede tener un control acústico y mejorar la contaminación ambiental en las poblaciones que limitan con los aeropuertos. El objetivo principal será la elaboración de un prototipo de sistema de monitorado de ruido capaz de medir el mismo en tiempo real, así como detectar y evaluar eventos sonoros provocados por aviones. Para ello se cuenta con un material específico: ordenador portátil, tarjeta de sonido externa de dos canales, dos micrófonos y un software de medida diseñado y desarrollado por el autor. Este será el centro de control del sistema. Para su programación se utilizará la plataforma y entorno de desarrollo LabVIEW. La realización de esta memoria se estructurará en tres partes. La primera parte está dedicada al estado del arte, en la que se explicarán algunos de los conceptos teóricos que serán utilizados para la elaboración del proyecto. En la segunda parte se explica la metodología seguida para la realización del sistema de monitorado. En primer lugar se describe el equipo usado, a continuación se expone como se realizó el software de medida así como su arquitectura general y por último se describe la interfaz al usuario. La última parte presenta los experimentos realizados que demuestran el correcto funcionamiento del sistema. ABSTRACT. This project addresses for the problematics caused by high quantities of environmental noise produced by planes in his daily operations as takeoff, landing or parking produced in populated areas nearly to airport enclosures. A solution to measure and to evaluate the levels produced by the aeronautical noise are aircraft noise monitoring systems. Thanks to these systems it is possible to have an acoustic control and improve the acoustic pollution in the populations who border on the airports. The main objective of this project is the production of a noise monitoring systems prototype capable of measuring real time noise, beside detecting and to evaluate sonorous events produced by planes. The specific material used is portable computer,sound external card of two channels, two microphones and a software of measure designed and developed by the author. This one will be the control center of the system. For his programming is used the platform of development LabVIEW. This memory is structured in three parts. The first part is dedicated to the condition of the art, in that will be explained some of the theoretical concepts that will be used for the production of the project. The second phase is to explain the methodology followed for the development of the noise monitoring systems. First a description of the used equipment, the next step, it is exposed how was realized the software of measure and his general architecture and finally is described the software user interface. The last part presents the realized experiments that demonstrate the correct use of the system.

The mirror-ball effect: Investigating channels, messages and participation levels

Journalists have always used equipment which has been generally available in the communities in which they worked. This has been a result both of economy and necessity, since they found they had to connect with their audiences using means that were available to the audience, not just to the sender. Newspapers sold on street corners in the very early media days; SMS and email have become the rule for the early 21st century. This development also admits the possibility of the roles of the communication professional and the community merging during the “public journalism” process, and has become most recently evident in the areas around the Bay of Bengal, struck by the tsunami on December 26, 2004, especially in the Indonesian province of Banda Aceh, and in the Andaman and Nicobar Islands, where tiny portable radios, featuring solar panels and hand-cranked dynamos, have suddenly become part of a vital news media channel. In this article participant-observation and personal interview techniques are used to record and compare many of the digital channels used by news and information senders up to 2005. It also investigates the level of genuine participation which these new technologies have brought to the communications process.