947 resultados para tris (2-etyyliheksyyli) fosfaatti
Resumo:
Työssä mitattiin työilman TBEP- ja TEHP-pitoisuuksia siivousalalla (3 kohdetta) ja muovituoteteollisuudessa (2 kohdetta). Pitoisuutta ilmassa verrattiin työntekijöidenbiomonitorointinäytteistä analysoitujen 2-butoksietikkahapon (2-BAA) ja 2-etyyliheksaanihapon (2-EHA) pitoisuuteen. Tavoitteena oli biomonitoroin-timenetelmän soveltuvuuden selvittäminen altistumisen arvioinnissa sekä tarvittavien lisäsuojaus- ja torjunta-tarpeiden selvittäminen. Biomonitorointia sekoittavien tekijöiden (2-butoksietanoli ja 2-etyyli-1-heksanoli) pitoisuus mitattiin työntekijöidenhengitysilmasta kerätystä VOC-näytteestä. OVS-keräimiin kerätyt TBEP- ja TEHP-näytteet uutettiin ultraäänellä sopivalla liuottimella ja analysoitiin kaasukromatografisesti (GC). VOC-näytteet kerättiin Tenax GR ¿adsorbenttiin, irrotettiin keräimestä termodesorptiolla ja analysoitiin GC:lla. Biomonitorointinäytteiden (virtsa) 2-BAA- ja 2-EHA -pitoisuus analysoitiin myös GC:lla. Lattianvahauksen aikana siivoojien hengitysilmasta mitatuissa TBEP-näytteissä pitoisuudet vaihtelivat välillä 70 - 860 ng/m3 sekä VOC-näytteistä 88 %:sta löytyi2-butoksietanolia, jonka pitoisuus vaihteli välillä 3 - 1800 µg/m3. Virtsan 2-BAA:n pitoisuudet vaihtelivat välillä <0,3 - 26 mmol/mol kreatiniinia ollen korkeimmillaan 43 % toimenpiderajasta. Raskaana olevien toimenpideraja ylitettiin 30 % näytteistä. Muovituotetehtaissa TEHP-pitoisuus työntekijöiden hengitysilmassa oli alle määritysrajan (eli < 1 - < 3 ng/m3). Muovituotetehtaissa kerätyistä VOC-näytteistä 16 %:sta löydettiin 2-etyyli-1-heksanolia, jonka pitoisuus vaihteli välillä 90 - 100 µg/m3. Virtsan 2-EHA-pitoisuudet olivat välillä <0,1 - 0,2 mmol/mol kreatiniinia. Tulosten perusteella siivoojat altistuvat TBEP:lle ja 2-butoksietanolille lattianvahauksen yhteydessä, muttaaltistuminen ei ilman pitoisuuksien ja biomonitoroinnin tulosten mukaan aiheutaterveyshaittaa ainakaan yhden mahdollisen metaboliitin 2-BAA:n kautta. Pois lukien raskaana olevat työntekijät, joille 2-butoksietanolia sisältävän vahanpoistotuotteen käsitteleminen aiheuttaa mahdollista terveyshaittaa. Käytetyillä biomonitorointimenetelmillä ei voitu osoittaa altistumista tapahtuneen mitatuilla TBEP:n ja TEHP:n pitoi-suustasoilla. Metaboliareittien varmistamisen jälkeen on mahdollista tutkia toimivampaa menetelmää altistumisen arviointiin biomonitoroinnin avulla. Työntekijöiden suojautuminen niin muovituotetehtaissa kuin siivoustyössäkin mitattujen yhdisteiden osalta oli pääosin riittävää. Ainoastaan raskaana olevien työntekijöiden, jotka siivoustyössään altistuvat 2-butoksietanolille, suojaukseen tulisi kiinnittää huomiota.
Resumo:
Reaction of K-3[Cr(ox)(3)] (ox = oxalate) with nickel(II) and tris(2-aminoethyl)amine (tren) in aqueous solution resulted in isolation of the bimetallic assembly [Ni-3(tren)(4)(H2O)(2)][Cr(ox)(3)](2). 6H(2)O. The polymeric complex {[Ni-2(tren)(3)][ClO4](4). H2O}(n) has been prepared by reaction of nickel(II) perchlorate and tren in aqueous solution. From the same reaction mixture the complex [Ni-2(tren)(2)(aepd)][ClO4](4). 2H(2)O (aepd = N-(2-aminoethyl)pyrrolidine-3,4-diamine), in which a bridging tren ligand contains a carbon-carbon bond between two arms forming a substituted pyrrolidine, has been isolated. The complexes have been characterized by X-ray crystallography. The magnetic susceptibility (300-4.2 K) and magnetization data (2, 4 K, H = 0-5 T) for {[Ni-2(tren)(3)][ClO4](4). H2O}(n) (300 K , 4.23 mu(B)) exhibit evidence of weak antiferromagnetic coupling and zero field splitting (2J = -1.8 cm(-1); \ D\ = 2 cm(-1)) at low temperature. For [Ni-3(tren)(4)(H2O)(2)][Cr(ox)(3)](2). 6H(2)O the susceptibility data at 300 K are indicative of uncoupled nickel(II) and chromium(III) sites with zero-field splitting and intramolecular antiferromagnetic coupling predicted at low temperature.
Resumo:
One-pot template condensation of CCl3C=N with ammonia on a metal source [MnCl2 center dot 4H(2)O, FeCl3 center dot 6H(2)O or Co(CH3COO)(2)center dot 4H(2)O] in DMSO led to the formation of tris(2,4-bis(trichloromethyl)-1,3,5-triazapentadienato)-M(III) complexes, [M(NH=C(CCl3)NC(CCl3)=-NH}(3)]center dot n(CH3)(2)SO [M = Mn, n = 1 (1); M = Fe, n = 2 (2); M = Co, n = 2 (3)1, which were characterized using elemental analysis, and IR, ESI-MS and single-crystal X-ray analysis. The role of inter- and intramolecular non-covalent halogen and hydrogen bonds in the synthesis of 1-3 is discussed. It is shown that the crystal ionic radii of the metal ions [68.5 (Co) < 69 (Fe) < 72 (Mn), pm] are related to the corresponding Cl center dot center dot center dot Cl distances [3.178 (3) > 3.155 (2) > 3.133 (1) Al. Compounds 1-3 and the related di(triazapentadienato)-Cu(v) complex [Cu(NH=C(CCl3)NC(CCl3)=NH}2]center dot 2(CH3)(2)SO (4) act as catalyst precursors for the additive-free microwave (MW) assisted homogeneous oxidation of 1-phenylethanol with tert-butylhydroperoxide (TBHP), leading to the formation of acetophenone with yields up to 99% and TONs up to 5.0 x 10(3) after 1 h of low power (10 W) MW irradiation.
Resumo:
No literature data above atmospheric pressure could be found for the viscosity of TOTIVI. As a consequence, the present viscosity results could only be compared upon extrapolation of the vibrating wire data to 0.1 MPa. Independent viscosity measurements were performed, at atmospheric pressure, using an Ubbelohde capillary in order to compare with the vibrating wire results, extrapolated by means of the above mentioned correlation. The two data sets agree within +/- 1%, which is commensurate with the mutual uncertainty of the experimental methods. Comparisons of the literature data obtained at atmospheric pressure with the present extrapolated vibrating-wire viscosity measurements have shown an agreement within +/- 2% for temperatures up to 339 K and within +/- 3.3% for temperatures up to 368 K. (C) 2014 Elsevier B.V. All rights reserved.
Resumo:
In Part I of the present work we describe the viscosity measurements performed on tris(2-ethylhexyl) trimellitate or 1,2,4-benzenetricarboxylic acid, tris(2-ethylhexyl) ester (TOTM) up to 65 MPa and at six temperatures from (303 to 373)K, using a new vibrating-wire instrument. The main aim is to contribute to the proposal of that liquid as a potential reference fluid for high viscosity, high pressure and high temperature. The present Part II is dedicated to report the density measurements of TOTM necessary, not only to compute the viscosity data presented in Part I, but also as complementary data for the mentioned proposal. The present density measurements were obtained using a vibrating U-tube densimeter, model DMA HP, using model DMA5000 as a reading unit, both instruments from Anton Paar GmbH. The measurements were performed along five isotherms from (293 to 373)K and at eleven different pressures up to 68 MPa. As far as the authors are aware, the viscosity and density results are the first, above atmospheric pressure, to be published for TOTM. Due to TOTM's high viscosity, its density data were corrected for the viscosity effect on the U-tube density measurements. This effect was estimated using two Newtonian viscosity standard liquids, 20 AW and 200 GW. The density data were correlated with temperature and pressure using a modified Tait equation. The expanded uncertainty of the present density results is estimated as +/- 0.2% at a 95% confidence level. Those results were correlated with temperature and pressure by a modified Tait equation, with deviations within +/- 0.25%. Furthermore, the isothermal compressibility, K-T, and the isobaric thermal expansivity, alpha(p), were obtained by derivation of the modified Tait equation used for correlating the density data. The corresponding uncertainties, at a 95% confidence level, are estimated to be less than +/- 1.5% and +/- 1.2%, respectively. No isobaric thermal expansivity and isothermal compressibility for TOTM were found in the literature. (C) 2014 Elsevier B.V. All rights reserved.
Resumo:
A systematic investigation of the reactivity and functionalization of two heterocyclic analogs of triphenylmethane , namely tris(2-thienyl)methane and tris(2-furyl)methane have been carried out and the results are presented in this thesis entitled "NOVEL REACTIONS OF TRIS(2-THIENYL)METHANE AND TRIS(2-FURYL)METHANE.". The history of organic free radicals dates back to Gomberg's monumental discovery of the triphenylmethyl radical in 1900. The heterocyclic analogs of triarylmethane are also interesting from the vantage point of their transformation to the corresponding radicals akin to Gomberg ' s triphenylmethyl radical and also they are prone to further transformation leading to three dimensionally elongated molecules such as dendrimers. Dendritic architectures are one of the most pervasive topologies observed in nature at the macro- and microdimensional length devices. Because of their ability to combine both organic and inorganic compounds and their propensity to either encapsulate or be engineered into unimolecular functional devices , dendrimers are versatile amongst existing nanoscale building blocks and materials.
Resumo:
Mode of access: Internet.
Resumo:
Tris(2-ethylhexyl) trimellitate (TOTM) was recently suggested as a reference fluid for industrial use associated with high viscosity at elevated temperature and pressure. Viscosity and density data have already been published on one sample covering the temperature range (303-373) K and at pressures up to about 65 MPa. The viscosity covered a range from about (9 to 460) mPa s. In the present article we study several other characteristics of TOTM that must be available if it were to be adopted as a standard. First, we present values for the viscosity and density obtained with a different sample of TOTM to examine the important feature of consistency among different samples. Vibrating-wire viscosity measurements were performed at pressures from (5 to 100) MPa, along 6 isotherms between (303 and 373) K. Density measurements were carried out from (293 to 373) K up to 68 MPa, along 4 isotherms, using an Anton Paar DMA HP vibrating U-tube densimeter. Secondly, we report a study of the effect of water contamination on the viscosity of TOTM, performed using an Ubbelhode viscometer under atmospheric pressure. Finally, in order to support the use of TOTM as a reference liquid for the calibration of capillary viscometers, values of its surface tension, obtained by the pendant drop method, are provided. (C) 2016 Elsevier B.V. All rights reserved.
Resumo:
There are small amounts of valuable metals, such as indium, gallium and germanium, in zinc process solutions. Their solvent extraction was studied in this work in sulphate solutions containing zinc and other metals present in industrial solutions. It was discovered, that a commercial bis(2-ethylhexyl)phosphate (D2EHPA) extractant can be used to extract indium and gallium. Indium was extracted separately at a higher acid concentration than gallium. Zinc was co-extracted faster than gallium and almost as much as gallium at the same pH. However, the scrubbing of zinc was possible using a dilute sulphuric acid and a short contact time while gallium losses were small. Both indium and gallium were stripped with sulphuric acid. Germanium was extracted with 5,8-diethyl-7-hydroxydodecane-6-oxime with the commercial name of LIX 63. Unlike other metals in the solution the extraction of germanium increased with different extractants as the acidity increased. Germanium extraction isotherm was measured for a 125 g/L sulfuric acid solution. The loaded organic phase was washed with pure water. It removed the co-extracted acid and part of the germanium and extracted impurities such as iron and copper. Germanium was stripped using a NaOH solution. A process model utilizing own experimentally determined extraction, scrubbing and stripping isotherms was made with HSC Sim software developed by Outotec Oyj. The model based on McCabe–Thiele diagrams was used in sizing the necessary amount of stages and phase ratios in a recovery process. It was concluded, that indium, gallium and germanium can be recovered in the process from a feed where their concentrations are low (<300 ppm). In an example case the feed contained also more than 20 g/L zinc and 2–8 g/L iron, aluminium and copper. The recoveries of indium, gallium and germanium were more than 90 % when 1–3 stages were used in each extraction, scrubbing and stripping section. Since the number of stages is small mixer-settlers would be well suited for this purpose.
Resumo:
O objetivo do experimento foi testar a eficácia de diferentes diluidores, a base de Ringer-Lactato, Leite Desnatado, TRIS (hidroxi-methil-amino-methan) e Lactose/TRIS, na criopreservação de sêmen bubalino. Foram utilizados três machos bubalinos da raça Murrah em plena atividade sexual. O sêmen foi colhido por vagina artificial totalizando 71 ejaculados. Após a colheita, cada amostra foi submetida às análises qualitativas e quantitativas do sêmen. Os ejaculados foram fracionados e diluídos nos quatro diluidores. O sêmen diluído foi envasado em palhetas de 0,25ml e submetidos a um tempo de equilíbrio de até quatro horas a 5ºC, com posterior congelação em nitrogênio líquido. As amostras identificadas foram descongeladas em banho maria à temperatura de 40°C por 30 segundos e seqüencialmente avaliadas quanto a motilidade, vigor, lesão de acrossoma, e percentual de patologias espermáticas. As amostras também foram submetidas ao teste de termo-resistência, permanecendo incubadas à temperatura de 40°C durante 30 segundos, 3-5 minutos, 30 minutos, 1 hora, 2 horas e 3 horas, onde foram avaliadas quanto a motilidade e o vigor espermático. As características físicoquímicas, após análise do sêmen in natura, encontraram-se dentro dos valores preconizados para a espécie bubalina e satisfatórios para o processo de congelação. Após descongelação do sêmen, observou redução numérica estatística (p<0,05) na motilidade espermática, sendo que no sêmen in natura se observou 86,67±6,17% reduzindo para 70±6,92% em TRIS, 67,4±8,01% em Ringer/lactato, 67,09±9,03% em Lactose/TRIS e 59,7±9,05% em leite desnatado e ao comparar entre os quatro tratamentos apenas o Leite desnatado mostrou diferença estatística significativa (p<0,05). Após descongelação, o vigor espermático também diminuiu estatisticamente (p<0,05) nos quatro tratamentos (3,50±0,53 TRIS; 3,38±0,49 Ringer-lactato; 3,3±0,46 Lactose/TRIS e 3,25±0,44 Leite desnatado) versus (4±0,39 sêmen in natura) e ao comparar entre os tratamento, apenas entre Leite desnatado e TRIS se observou diferença estatística (p<0,05). Quanto aos defeitos maiores (4,15±1,9% sêmen in natura; 10,51±4,4% TRIS; 11,94±4,2% Ringer-Lactato; 11,88±4,8% Lactose/TRIS; 12,01±5% Leite desnatado), menores (3,81±1,2% sêmen in natura; 4,67±1,1% TRIS; 4,98±1,7% Ringer-Lactato; 4,93±2,0% Lactose/TRIS; 4,93±2,0% Leite desnatado) e totais (7,91±2,1% sêmen in natura; 15,18±4,7% TRIS; 16,92±4,8% Ringer-Lactato; 16,82±5,6% Lactose/TRIS; 17,11±5,6% Leite desnatado), após descongelação houve aumento significativo dos defeitos nos quatro tratamentos (p<0,05), e entre eles não foram observadas diferenças estatísticas entre si (p>0,05). Na fase pós-TTR, após 3 horas de incubação, a motilidade progressiva (TRIS 21,13±7,5%; Ringer-Lactato 20,78±7,4%; Lactose/TRIS 20,25±5,3%; Leite desnatado 20,12±6,6%) e vigor espermático (TRIS 2,04±0,5; Ringer-Lactato 2,07±0,5; Lactose/TRIS 2,02±0,4; Leite desnatado 2,00±0,5) não apresentaram diferença estatística entre os tratamentos (p<0,05). Quanto a intergridade do acrossoma, após a descongelação (Sêmen in natura 97,85±0,6%; TRIS 91,65±4,3%; Ringer-Lactato 90,46±4,8%; Lactose/TRIS 89,76±5,4%; Leite desnatado 90,56±5,6%), houve diminuição estatística (p<0,05) e quando se comparou tal parâmetro entre os tratamentos não foi observado diferenças estatísticas significativas entre os tratamento (p>0,05). Diante dos resultados observados é possível concluir que a congelação de sêmen de búfalo com os diluidores TRIS (Trishydroxy- methyl-amino-methan), Ringer-Lactato, Lactose/TRIS, e Leite desnatado mostraram satisfatória função de crioproteção na viabilidade espermática do sêmen nas diferentes etapas da criopreservação.
Resumo:
For many years proof that the hypoxic nature of malignant tumours can be used to selectively target anticancer drugs has been sought. Several classes of potential redox activated anticancer drugs have been developed to take advantage of the reducing environment resulting from the hypoxia. Drug complexes with redox active metal centres as carriers have been investigated, but have largely been employed with cytotoxic drugs that require release of the drug intracellularly, complicating the design of such complexes. MMP inhibitors, a new class of anticancer drug, conversely act in the extracellular environment and we have investigated inhibitor complexes with several redox active transition metals. Marimastat is an MMP inhibitor with potent in-vitro antimetastatic activity and was recently in Phase III clinical trials for a variety of cancer types. We have synthesised a Co(II1) complex of marimastat incorporating the tetradentate ligand tpa (tris(2-methylpyridyl)amine) as a carrier ligand. The complex was structurally characterised in the solid state by single crystal X-ray diffraction, the first example of a crystal structure containing marimastat. 2D COSY and NOESY NMR spectra showed that the complex exists in two isomeric forms in solution, corresponding to the cis and trans isomers yet only crystallises in one of these forms. Biological testing of the complex in mice with 4T1.2 tumours showed interesting and unexpected outcomes. Initial results of the tumour growth inhibition study showed that a significant inhibition of growth was exhibited by the complex over the free inhibitor and the control. However, the metastatic potential of both free marimastat and the complex were higher than the control indicating likely problems with the experimental protocol. Further experiments are needed to determine the potential of such complexes as hypoxia activated prodrugs but there appears at least to be some promise.
Resumo:
The new potentially N-4-multidentate pyridyl-functionalized scorpionates 4-((tris-2,2,2-(pyrazol-1-ypethoxy)methyl)pyridine (TpmPy, (1)) and 4-((tris-2,2,2-(3-phenylpyrazol-1-yl)ethoxy)methyl)pyridine (TpmPy(Ph), (2)) have been synthesized and their coordination behavior toward Fe-II, Ni-II, Zn-II, Cu-II, Pd-II, and V-III centers has been studied. Reaction of (1) with Fe(BF4)(2)center dot 6H(2)O yields [Fe(TpmPy)(2)](BF4)(2) (3), that, in the solid state, shows the sandwich structure with trihapto ligand coordination via the pyrazolyl arms, and is completely low spin (LS) until 400 K. Reactions of 2 equiv of (1) or (2) with Zn-II or Ni-II chlorides give the corresponding metal complexes with general formula [MCl2(TpmPy*)(2)] (M = Zn, Ni; TpmPy* = TpmPy, TpmPy(Ph)) (4-7) where the ligand is able to coordinate through either the pyrazolyl rings (in case of [Ni(TpmPy)(2)Cl-2 (5)) or the pyridyl-side (for [ZnCl2(TpmPy)(2)] (4), [ZnCl2(TpmPy(Ph))(2)] (6) and [NiCl2(TpmPy(Ph))(2)] (7)). The reaction of (1) with VCl3 gives [VOCl2(TpmPy)] (8) that shows the N-3-pyrazolyl coordination-mode. Moreover, (1) and react with cis-[PdCl2(CH3CN)(2)] to give the disubstituted complexes [PdCl2(TprnPy)(2)] (9) and [PdCl2(TpmPy(Ph))(2)] (10), respectively, bearing the scorpionate coordinated via the pyridyl group. Compounds (9) and (10) react with Fe(BF4)(2) to give the heterobimetallic Pd/Fe systems [PdCl2(mu-TpmPy)(2)-Fe](BF4)(2) (11) and [PdCl2(mu-TpmPy(Ph))(2)Fe-2(H2O)(6)]BF4)(4) (13), respectively. Compound (11) can also be formed from reaction of (3) with cis-[PdCl2(CH3CN)(2)], while reaction of (3) with Cu(NO3)(2).2.5H(2)O generates [Fe(mu-TpmPy)(2)-Cu(NO3)(2)](BF4)(2) (12), confirming the multidentate ability of the new chelating ligands. The X-ray diffraction analyses of compounds (1), (3), (4), (5), and (9) are also reported.
Resumo:
Työssä tutkittiin metalli- ja anioniepäpuhtauksien myötäuuttautumista sinkin mukana di(2-etyyliheksyyli)fosforihappoalla (D2EHPA). Laboratoriokokeissa selvitettiin pH:n vaikutusta metalliepäpuhtauksien uuttautumiseen pH-alueella -O, l... 3 sekä pesujen vaikutusta sinkillä ladatun orgaanisen faasin metallipitoisuuksiin. Kokeita tehtiin sekä synteettisillä että autenttisilla prosessiliuoksilla. Anionikokeissa tutkittiin raudan ja sinkin vaikutusta kloridin ja fluoridin uuttautumiseen. Synteettisillä liuoksilla tehdyissä kokeissa tutkittiin kadmiumin, koboltin, nikkelin, kuparin sekä antimonin uuttautumista sinkkisulfaattiliuoksesta. Kokeissa havaittiin D2EHPA:n uuttavan sinkkiä selvästi em. metalleja paremmin. Sinkki uuttautui sulfaattiliuoksesta lähes täydellisesti tasapaino-pH:n ollessa yli 2,3. Sinkin jälkeen muista metalleista uuttautui eniten kadmium ja järjestyksessä sitten kupari, koboltti ja nikkeli. Epäpuhtausmetallien myötäuuttautumista lisääntyi uuton tasapaino-pH:n kasvaessa ja väheni sinkkilatauksen kasvaessa. Kahdella peräkkäisellä pesuaskeleella, joissa ensimmäinen pesuliuos sisälsi 5 g/L rikkihappoa ja toinen sekä 15 g/L rikkihappoa että 5 g/L sinkkiä saatiin kaikkien epäpuhtausmetallien pitoisuudet jäämään alle 3 mg/L. Antimonin uuttokokeissa huomattiin antimonin uuttautuvan täydellisesti D2EHPA:lla pH:sta riippumatta pH-alueella0...3. Prosessiliuoksilla tehdyissä kokeissa todettiin D2EHPA:n pystyvän tehokkaasti erottamaan sinkin magnesiumista ßzn,Mg ˜107 ja kadmiumista ßzn,cd ˜106. Havaittiin myös, että mitä suurempi sinkki- ja rautalataus orgaanisessa faasissa on sitä vähemmän magnesiumia ja kadmiumia uuttautuu. Ensimmäisessä pesussa saatiin sekä kadmiumin että magnesiumin pitoisuudet putoamaan keskimäärin 0,1 mg/L eli 30 alkuperäisestä pitoisuudesta. Toisella pesuaskeleella ei enää ollut vaikutusta kadmiumin ja magnesiumin pitoisuuksiin orgaanisessa faasissa. Kokeissa havaittiin myös, että D2EHPA:n latausasteen ylittäessä 0,7 alkaa sinkki-D2EHPA-kompleksit polymeroitua ja faasit eivät enää selkeytyneet helposti. Anionikokeissa huomattiin, ettei D2EHPA uuttanut kloridi tai fluoridi sinkin tai raudan mukana. D2EHPA:n havaittiin myös itsessään sisältävän hieman kloridia.
Resumo:
Fabrication of new optical devices based upon the incorporation of rare earth ions via sol-gel methods depends on elimination of dopant ion clusters and residual hydroxyl groups from the final material. The optical absorption and/or luminescence properties of luminescent rare earth ions are influenced by the local bonding environment and the distribution of the rare-earth dopants in the matrix. Typically, dopants are incorporated into gel via dissolution of soluble species into the initial precursor sol. In this work, Eu3+ is used as optical probe, to assess changes in the local environment. Results of emission, excitation, fluorescence line narrowing and lifetimes studies of Eu3+-doped gels derived from Si(OCH3)4 and fluorinated/chelate Eu3+ precursors are presented. The precursors used in the sol-gel synthesis were: tris (6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedionate) Eu(III), Eu (III) trifluoromethanesulfonate, Eu(III) acetylacetonate hydrate, Eu (III) trifluoroacetate trihidrate, tris (2,2,6,6-tetramethyl-3,5- heptanedionate) Eu(III) and Eu(NO3)3.6H2O. The results were interpreted in terms of the evolution of the Eu3+ fluorescence in systems varying from solution to the gels densified to 800ºC. The lifetimes studies indicate that the fluorinated precursors are effective at reducing the water content in densified gels.