The story of … the top hat

Throughout the 19th century, the top hat was a mainstay of Victorian life: a man in a topper was well-to-do, respectable, a man of industry. But now the top hat is only a caricature of the upper class privilege it once represented. Its history traces a line through dandies, beavers, silk, and madness...

Numerical Partition of Energy Absorption of Foam-filled Top-Hat and Double-Hat Sections

The interaction effect, i.e., the contribution of each component to the total energy absorption of an axially crushed foam-filled hat section was investigated quantitatively via numerical simulation. The FE results were first verified by experimental work of aluminum foam-filled top-hat and double-hat sections, then the contribution of foam-fillers and that of hat sections to the overall energy absorption were quantitatively obtained, respectively. When foam-filled, increase in energy absorption was found both in hat section component and foam-filler component, whereas the latter contributes predominantly to the interaction effect.

Evolução top-hat hidrodinâmica em campos de velocidades peculiares primordiais

We investigate the cosmology of the vacuum energy decaying into cold dark matter according to thermodynamics description of Alcaniz & Lima. We apply this model to analyze the evolution of primordial density perturbations in the matter that gave rise to the first generation of structures bounded by gravity in the Universe, called Population III Objects. The analysis of the dynamics of those systems will involve the calculation of a differential equation system governing the evolution of perturbations to the case of two coupled fluids (dark matter and baryonic matter), modeled with a Top-Hat profile based in the perturbation of the hydrodynamics equations, an efficient analytical tool to study the properties of dark energy models such as the behavior of the linear growth factor and the linear growth index, physical quantities closely related to the fields of peculiar velocities at any time, for different models of dark energy. The properties and the dynamics of current Universe are analyzed through the exact analytical form of the linear growth factor of density fluctuations, taking into account the influence of several physical cooling mechanisms acting on the density fluctuations of the baryonic component of matter during the evolution of the clouds of matter, studied from the primordial hydrogen recombination. This study is naturally extended to more general models of dark energy with constant equation of state parameter in a flat Universe

Shaping the PSF to nearly top-hat profile: CHEOPS laboratory results

Spreading the PSF over a quite large amount of pixels is an increasingly used observing technique in order to reach extremely precise photometry, such as in the case of exoplanets searching and characterization via transits observations. A PSF top-hat profile helps to minimize the errors contribution due to the uncertainty on the knowledge of the detector flat field. This work has been carried out during the recent design study in the framework of the ESA small mission CHEOPS. Because of lack of perfect flat-fielding information, in the CHEOPS optics it is required to spread the light of a source into a well defined angular area, in a manner as uniform as possible. Furthermore this should be accomplished still retaining the features of a true focal plane onto the detector. In this way, for instance, the angular displacement on the focal plane is fully retained and in case of several stars in a field these look as separated as their distance is larger than the spreading size. An obvious way is to apply a defocus, while the presence of an intermediate pupil plane in the Back End Optics makes attractive to introduce here an optical device that is able to spread the light in a well defined manner, still retaining the direction of the chief ray hitting it. This can be accomplished through an holographic diffuser or through a lenslet array. Both techniques implement the concept of segmenting the pupil into several sub-zones where light is spread to a well defined angle. We present experimental results on how to deliver such PSF profile by mean of holographic diffuser and lenslet array. Both the devices are located in an intermediate pupil plane of a properly scaled laboratory setup mimicking the CHEOPS optical design configuration. © (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Top-Hat HELLISH-VCSOA for optical amplification and wavelength conversion for 0.85 to 1.3ìm operation

The Top-Hat hot electron light emission and lasing in semiconductor heterostructure (HELLISH)-vertical cavity semiconductor optical amplifier (VCSOA) is a modified version of a HELLISH-VCSOA device. It has a shorter p-channel and longer n-channel. The device studied in this work consists of a simple GaAs p-i-n junction, containing 11 Ga0.35In0.65 N0.02As0.08/GaAs multiple quantum wells in its intrinsic region; the active region is enclosed between six pairs of GaAs/AlAs top distributed Bragg reflector (DBR) mirrors and 20.5 pairs of AlAs/GaAs bottom DBR mirrors. The operation of the device is based on longitudinal current transport parallel to the layers of the GaAs p-n junction. The device is characterised through I-V-L and by spectral photoluminescence, electroluminescence and electro-photoluminescence measurements. An amplification of about 25 dB is observed at applied voltages of around V = 88 V.

Top-hat random fiber Bragg grating

We examined the possibility of using noise or pseudo-random variations of the refractive index in the design of fiber Bragg gratings (FBGs). We demonstrated theoretically and experimentally that top-hat FBGs may be designed and fabricated using this approach. The reflectivity of the fabricated top-hat FBG matches quite well with that of the designed one. © 2015 Optical Society of America.

BET on Top Hat: challenges to improve language proficiency

Within the business context, communication and interaction tends to be considerably rooted in the use of English (as lingua franca), as well as in ICT use. Thus, professionals have to be able to speak the English language, resorting to specific, internationally recognised terminology and be proficient in the use of manifold ICT tools. In fact, the tendency is for the great majority of higher education (HE) students to own mobile devices (laptops, smartphones and/or tablets) and use them to access information and communicate/interact with content and other people. Bearing this in mind, a teaching and learning strategy was designed, in which m-learning (i.e. learning in which the delivery platform is a mobile device) was used to approach Business English Terminology (BET). The strategy was labelled as ‘BET on Top Hat’, once the selected application was Top Hat (https://tophat.com/) and the idea was for students to face it as if it were a game/challenge. In this scenario, the main goals of this exploratory study were to find evidence as to: i) the utility of m-learning activities for learning BET and ii) if and how m-learning activities can generate intrinsic motivation in students to learn BET. Participants (n=23) were enrolled in English II, a curricular unit of the 1st cycle degree in Retail Management offered at Águeda School of Technology and Management – University of Aveiro (2014/15 edition). The data gathered included the students’ results in quizzes and their answers to a short final evaluation questionnaire regarding their experience with BET on Top Hat. Consequently, data were treated and analysed resorting to descriptive statistical analysis, and, when considered pertinent, the teacher’s observation notes were also considered. The results unveil that, on the one hand, the strategy had a clear positive impact on the students’ intrinsic motivation and, on the other hand, the students’ performance as to BET use tended to improve over time.

Large-Eddy Simulation of physiological pulsatile non-newtonian flow in a channel with double constriction

Physiological pulsatile flow in a 3D model of arterial double stenosis, using the modified Power-law blood viscosity model, is investigated by applying Large Eddy Simulation (LES) technique. The computational domain has been chosen is a simple channel with biological type stenoses. The physiological pulsation is generated at the inlet of the model using the first four harmonics of the Fourier series of the physiological pressure pulse. In LES, a top-hat spatial grid-filter is applied to the Navier-Stokes equations of motion to separate the large scale flows from the subgrid scale (SGS). The large scale flows are then resolved fully while the unresolved SGS motions are modelled using the localized dynamic model. The flow Reynolds numbers which are typical of those found in human large artery are chosen in the present work. Transitions to turbulent of the pulsatile non-Newtonian along with Newtonian flow in the post stenosis are examined through the mean velocity, wall shear stress, mean streamlines as well as turbulent kinetic energy and explained physically along with the relevant medical concerns.

A study of abrasive water jet characteristics by CFD simulation

Computational fluid dynamics (CFD) models for ultrahigh velocity waterjets and abrasive waterjets (AWJs) are established using the Fluent 6 flow solver. Jet dynamic characteristics for the flow downstream from a very fine nozzle are then simulated under steady state, turbulent, two-phase and three-phase flow conditions. Water and particle velocities in a jet are obtained under different input and boundary conditions to provide an insight into the jet characteristics and a fundamental understanding of the kerf formation process in AWJ cutting. For the range of downstream distances considered, the results indicate that a jet is characterised by an initial rapid decay of the axial velocity at the jet centre while the cross-sectional flow evolves towards a top-hat profile downstream.

Study of buoyant jets in natural ventilation of a model room

Buoyant jets in natural ventilation of a model room with water as the fluid medium have been studied. A constant heat flux has been maintained on the bottom surface of the room. The buoyancy causes flow to enter through the bottom opening and leave through the top opening. The shadowgraph technique is used for visualization. At the inlet, a negatively buoyant jet is observed, whereas a positively buoyant jet is observed at the outlet. The theoretical results for the centerline trajectories of these buoyant jets using both Gaussian and top-hat profiles are discussed considering the variation of the entrainment coefficient with the local Froude number and the variation of the spreading ratio of buoyancy to velocity profile with the distance from the source. The shape of the profiles is found to evolve from top-hat to Gaussian geometry.

Território de gente e de música: Jovens no Centro cultural Cartola e o cotidiano de uma experiência

Este trabalho busca compor um quadro das práticas cotidianas de jovens frequentadores das oficinas de jazz oferecidas pelo Centro Cultural Cartola (CCC). Contextualizado dentro de um universo tradicionalmente conhecido por sua origem no samba, esse território de arte e de expressão através do corpo e da música contempla outros movimentos musicais, principalmente o jazz e o moderno, possibilitando um conjunto de múltiplos sentidos e ressignificações na vida destes participantes. Como fundamentação epistemológica, foi utilizada a Teoria Ator-Rede (TAR), concebida como forma de abordar a fabricação dos fatos, ao abranger, simetricamente, natureza e sociedade, humano e não humano. Foram igualmente consideradas as possíveis configurações de interação e sociabilidade que envolvem território, sujeito e demais atores da rede, os quais conseguem reconhecer-se diante do outro, do diferente, e construírem um projeto individual e coletivo frente à sociedade multicultural em que estão inseridos. Para isso, foram realizadas entrevistas que, por sua vez, são complementos à descrição interpretativa registrada no diário de campo, permitindo a dimensão de improviso, de manejo das situações e de envolvimento nas incessantes redefinições processuais. O campo explorado foi, estritamente, o de jovens adolescentes, num recorte etário de 14 a 21 anos. Todos deveriam estar matriculados na escola ensino fundamental e médio e residir em comunidade, não sendo necessariamente a Mangueira. As abordagens contemplaram também as incontáveis participações do professor da oficina de jazz. Durante o processo, emanou-se a existência de um apaixonamento e de uma apropriação por parte de todos os envolvidos com a oficina: parte administrativa, pedagógica e docente, garantindo autonomia e diferencial no universo social do grupo, cujas escolhas legitimam o quanto o investimento na cultura produz artistas conscientes da beleza inerente à própria arte e aos afetamentos daí advindos. Interessante ressaltar que o samba funciona como marca histórica e temporal do CCC, mas a principal motivação ali percebida estava no encontro mediado pela dança, junção corpo/música, presente na vida dos participantes desde a infância, além do prazer de pertencerem a um grupo afim, movido por histórias semelhantes. Junto a isso, o professor exercia o papel de liderança velada, a mediar as relações e a produzir efeitos de coesão grupal, com suas ideias e incentivo à expressão pela dança, de modo a dar lugar a novas descobertas e ressignificação

Postcard - "Hello Boys"

A postcard with an insect illustration wearing a top hat and suit. The handwritten note on the front reads "Don't you think that I look well and prosperous?". On the reverse of the postcard it reads "A Happy New Year", addressed to Miss M. Woodruff, 168 Ontario St., St. Catherines, Ontario, Canada. The stamp is U.S. postage and the postmark is for Grand Central Station N.Y.

The effect of clamping sequence on dimensional variability in sheet metal assembly

Finite element (FE) modelling techniques have become a popular tool for exploring welding and clamping sequence dependence in sheet metal assemblies. In the current paper, the dimensional variability associated with different assembly clamping sequences is investigated with a FE contact modelling approach implemented in the commercial code Abaqus. A simplified channel section assembly consisting of a top hat and bottom plate is the case study investigated. Expected variation modes of bow and twist were used to simulate key variability sources in the main structural component under investigation; the top hat of the channel section. It was found that final assembly variability can change considerably depending on clamp sequence selection. It was also found that different clamp sequences can control particular modes of variation better than others, and that there is not one particular clamping sequence that is the best for containing all variation modes. An adaptable assembly process is therefore suggested, where given the shape of input components the best available clamping sequence is selected. Comparison of the performance of the proposed adaptable clamping sequence to traditional fixed clamping sequences shows improvements for the dimensional control of variability in non-rigid components. While introducing such a method in production would require inspection of each component being assembled and investigation of the alternative clamping sequences, given access to fast and detailed dimensional inspection technology such as optical coordinate measuring machines (OCMM's), the approach shows promise for future application.

Evolution of spherical non-uniform perturbations in the universe

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)