Snap-through and pull-in instabilities of an arch-shaped beam under an electrostatic loading

The snap-through and pull-in instabilities of the micromachined arch-shaped beams under an electrostatic loading are studied both theoretically and experimentally. The pull-in instability that results in a system collision with an electrode substrate may lead to a system failure and, thus, limits the system maximum displacement. The beam/plate structure with a flat initial configuration under an electrostatic loading can only experience the pull-in instability. With the different arch configurations, the structure may experience either only the pull-in instability or the snap-through and pull-in instabilities together. As shown in our computation and experiment, those arch-shaped beams with the snap-through instability have the larger maximum displacement compared with the arch-shaped beams with only the pull-in stability and those with the flat initial configuration. The snap-through occurs by exerting a fixed load, and the structure experiences a discontinuous displacement jump without consuming power. Furthermore, after the snap-through jump, the structures are demonstrated to have the capacity to withstand further electrostatic loading without pull-in. Those properties of consuming no power and increasing the structure deflection range without pull-in is very useful in microelectromechanical systems design, which can offer better sensitivity and tuning range.

A note on non-linear phenomena in a non-ideal oscillator, with a snap-through truss absorber, including parameter uncertainties

This work considers the vibrating system that consists of a snap-through truss absorber coupled to an oscillator under excitation of an electric motor with an eccentricity and limited power, characterizing a non-ideal oscillator. It is aimed to use the non-linearity and quasi-zero stiffness of absorber (snap-through truss absorber) to obtain a significantly attenuation the jump phenomenon. There is also an interest to exhibit the reduction of Sommerfeld effect, to confirm the saturation phenomenon occurrence and show the power transfer in a non-linear structure, evidencing the pumping energy. As shown by simulations in this work, this absorber allows the energy pumping before and during the jump phenomenon, decreasing the higher amplitudes of considered system. Additionally, the occurrence of saturation phenomenon due use of snap-through truss absorber is verified. The analysis of parameter uncertainties was introduced. Sensitivity of system with parametric errors demonstrated a trustable system. © IMechE 2012.

Análise de um oscilador não linear acoplado a um absorvedor tipo snap through truss (STTA)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Using of a snap-through truss absorber in the attenuation of the sommerfeld effect

This work, considers a vibrating system, which consists of a snap-through truss absorber (STTA) coupled to an oscillator, under excitation of an DC motor, with an eccentricity and limited power, characterizing a non-ideal oscillator (NIO). It is aimed to use the absorber STTA, to establish the conditions, that we have the maxim attenuation of the jumpphenomenon (Sommerfeld Effect). Here, weare interestedin determining the conditions of the vibrating system, in which there arereduced amplitudes of the oscillator, when it passes through the region of resonance.

Higher-order non-linear analysis of steel structures. Part I : elastic second-order formulation

This paper presents a higher-order beam-column formulation that can capture the geometrically non-linear behaviour of steel framed structures which contain a multiplicity of slender members. Despite advances in computational frame software, analyses of large frames can still be problematic from a numerical standpoint and so the intent of the paper is to fulfil a need for versatile, reliable and efficient non-linear analysis of general steel framed structures with very many members. Following a comprehensive review of numerical frame analysis techniques, a fourth-order element is derived and implemented in an updated Lagrangian formulation, and it is able to predict flexural buckling, snap-through buckling and large displacement post-buckling behaviour of typical structures whose responses have been reported by independent researchers. The solutions are shown to be efficacious in terms of a balance of accuracy and computational expediency. The higher-order element forms a basis for augmenting the geometrically non-linear approach with material non-linearity through the refined plastic hinge methodology described in the companion paper.

Second-order elastic finite element analysis of steel structures using a single element per member

Finite element frame analysis programs targeted for design office application necessitate algorithms which can deliver reliable numerical convergence in a practical timeframe with comparable degrees of accuracy, and a highly desirable attribute is the use of a single element per member to reduce computational storage, as well as data preparation and the interpretation of the results. To this end, a higher-order finite element method including geometric non-linearity is addressed in the paper for the analysis of elastic frames for which a single element is used to model each member. The geometric non-linearity in the structure is handled using an updated Lagrangian formulation, which takes the effects of the large translations and rotations that occur at the joints into consideration by accumulating their nodal coordinates. Rigid body movements are eliminated from the local member load-displacement relationship for which the total secant stiffness is formulated for evaluating the large member deformations of an element. The influences of the axial force on the member stiffness and the changes in the member chord length are taken into account using a modified bowing function which is formulated in the total secant stiffness relationship, for which the coupling of the axial strain and flexural bowing is included. The accuracy and efficiency of the technique is verified by comparisons with a number of plane and spatial structures, whose structural response has been reported in independent studies.

On the advanced analysis of steel frames allowing for flexural, local and lateral-torsional buckling

Detailed procedure for second-order analysis has been coded in the newest Eurocode 3 and the Hong Kong steel code (2005). The effective length method has been noted to be inapplicable to analysis of shallow domes of imperfect members exhibiting snap-through buckling, to portals with leaning columns and others. On the other hand, the advanced analysis is not limited to buckling design of these structures. This paper demonstrates its application to the design of a simple plane sway portal and a three diminsional non-sway steel building. The results by the advanced analysis and the first-order linear analysis are compared and the technique for practical second-order analysis steel structures is described. It is observed that the use of a straight element by itself cannot model the buckling resistance of columns governed by different buckling curves for hot-rolled and cold-formed sections of various shapes like I, H, hollow etc. Also the curvature of the conventional cubic Hermite element is not varied by the external axial force and thus it cannot simulate the response of a buckling column. Thus its use for second-order analysis is basically unacceptable. A technique for additional checking of beams undergoing lateral-torsional buckling is also suggested making the advanced analysis a complete design tool for conventional steel frames.

Snapthrough instability of a stochastic a von Mises truss

A von Mises truss with stochastically varying material properties is investigated for snapthrough instability. The variability of the snap-through load is calculated analytically as a function of the material property variability represented as a stochastic process. The bounds are established which are independent of the knowledge of the complete description of correlation structure which is seldom possible using the experimental data. Two processes are considered to represent the material property variability and the results are presented graphically. Ein von Mises Fachwerk mit stochastisch verteilten Materialeigenschaften wird bezüglich der Durchschlagsinstabilität untersucht. Die Spannbreite der Durchschlagslast wird analytisch als Funktion der Spannbreite der Materialeigenschaften berechnet, die stochastisch verteilt angenommen werden. Eine explizite Gesamtbeschreibung der Struktur ist bei Benutzung experimenteller Daten selten möglich. Deshalb werden Grenzen für die Durchschlagskraft entwickelt, die von der Kenntnis dieser Gesamtbeschreibung unabhängig sind. Zwei Grenzfälle werden betrachtet, um die Spannbreite der Materialeigenschaften darzustellen. Die Ergebnisse werden grafisch dargestellt.

NON-DIMENSIONAL KINETOELASTOSTATIC MAPS FOR COMPLIANT MECHANISMS

How do we assess the capability of a compliant mechanism of given topology and shape? The kinetoelastostatic maps proposed in this paper help answer this question. These maps are drawn in 2D using two non-dimensional quantities, one capturing the nonlinear static response and the other the geometry, material, and applied forces. Geometrically nonlinear finite element analysis is used to create the maps for compliant mechanisms consisting of slender beams. In addition to the topology and shape, the overall proportions and the proportions of the cross-sections of the beam segments are kept fixed for a map. The finite region of the map is parameterized using a non-dimensional quantity defined as the slenderness ratio. The shape and size of the map and the parameterized curves inside it indicate the complete kinetoelastostatic capability of the corresponding compliant mechanism of given topology, shape, and fixed proportions. Static responses considered in this paper include input/output displacement, geometric amplification, mechanical advantage, maximum stress, etc. The maps can be used to compare mechanisms, to choose a suitable mechanism for an application, or re-design as may be needed. The usefulness of the non-dimensional maps is presented with multiple applications of different variety. Non-dimensional portrayal of snap-through mechanisms is one such example. The effect of the shape of the cross-section of the beam segments and the role of different segments in the mechanism as well as extension to 3D compliant mechanisms, the cases of multiple inputs and outputs, and moment loads are also explained. The effects of disproportionate changes on the maps are also analyzed.

Analytical method of predicating the instabilities of a micro arch-shaped beam under electrostatic loading

An arch-shaped beam with different configurations under electrostatic loading experiences either the direct pull-in instability or the snap-through first and then the pull-in instability. When the pull-in instability occurs, the system collides with the electrode and adheres to it, which usually causes the system failure. When the snap-through instability occurs, the system experiences a discontinuous displacement to flip over without colliding with the electrode. The snap-through instability is an ideal actuation mechanism because of the following reasons: (1) after snap-through the system regains the stability and capability of withstanding further loading; (2) the system flips back when the loading is reduced, i.e. the system can be used repetitively; and (3) when approaching snap-through instability the system effective stiffness reduces toward zero, which leads to a fast flipping-over response. To differentiate these two types of instability responses for an arch-shaped beam is vital for the actuator design. For an arch-shaped beam under electrostatic loading, the nonlinear terms of the mid-plane stretching and the electrostatic loading make the analytical solution extremely difficult if not impossible and the related numerical solution is rather complex. Using the one mode expansion approximation and the truncation of the higher-order terms of the Taylor series, we present an analytical solution here. However, the one mode approximation and the truncation error of the Taylor series can cause serious error in the solution. Therefore, an error-compensating mechanism is also proposed. The analytical results are compared with both the experimental data and the numerical multi-mode analysis. The analytical method presented here offers a simple yet efficient solution approach by retaining good accuracy to analyze the instability of an arch-shaped beam under electrostatic loading.

Análise não-linear de treliças pelo método dos elementos finitos posicional

This work presents the positional nonlinear geometric formulation for trusses using different strain measures. The positional formulation presents an alternative approach for nonlinear problems. This formulation considers nodal positions as variables of the nonlinear system instead of displacements (widely found in literature). The work also describes the arc-length method used for tracing equilibrium paths with snap-through and snap-back. Numerical applications for trusses already established in the literature and comparisons with other studies are provided to prove the accuracy of the proposed formulation

Modellazione numerica del comportamento di una struttura in muratura

In questi ultimi anni il tema della sicurezza sismica degli edifici storici in muratura ha assunto particolare rilievo in quanto a partire soprattutto dall’ordinanza 3274 del 2003, emanata in seguito al sisma che colpì il Molise nel 2002, la normativa ha imposto un monitoraggio ed una classificazione degli edifici storici sotto tutela per quanto riguarda la vulnerabilità sismica (nel 2008, quest’anno, scade il termine per attuare quest’opera di classificazione). Si è posto per questo in modo più urgente il problema dello studio del comportamento degli edifici storici (non solo quelli che costituiscono monumento, ma anche e soprattutto quelli minori) e della loro sicurezza. Le Linee Guida di applicazione dell’Ordinanza 3274 nascono con l’intento di fornire strumenti e metodologie semplici ed efficaci per affrontare questo studio nei tempi previsti. Il problema si pone in modo particolare per le chiese, presenti in grande quantità sul territorio italiano e di cui costituiscono gran parte del patrimonio culturale; questi edifici, composti di solito da grandi elementi murari, non presentano comportamento scatolare, mancando orizzontamenti, elementi di collegamento efficace e muri di spina interni e sono particolarmente vulnerabili ad azioni sismiche; presentano inoltre un comportamento strutturale a sollecitazioni orizzontali che non può essere colto con un approccio globale basato, ad esempio, su un’analisi modale lineare: non ci sono modi di vibrare che coinvolgano una sufficiente parte di massa della struttura; si hanno valori dei coefficienti di partecipazione dei varii modi di vibrare minori del 10% (in generale molto più bassi). Per questo motivo l’esperienza e l’osservazione di casi reali suggeriscono un approccio di studio degli edifici storici sacri in muratura attraverso l’analisi della sicurezza sismica dei cosiddetti “macroelementi” in cui si può suddividere un edificio murario, i quali sono elementi che presentano un comportamento strutturale autonomo. Questo lavoro si inserisce in uno studio più ampio iniziato con una tesi di laurea dal titolo “Analisi Limite di Strutture in Muratura. Teoria e Applicazione all'Arco Trionfale” (M. Temprati), che ha studiato il comportamento dell’arco trionfale della chiesa collegiata di Santa Maria del Borgo a San Nicandro Garganico (FG). Suddividere un edificio in muratura in più elementi è il metodo proposto nelle Linee Guida, di cui si parla nel primo capitolo del presente lavoro: la vulnerabilità delle strutture può essere studiata tramite il moltiplicatore di collasso quale parametro in grado di esprimere il livello di sicurezza sismica. Nel secondo capitolo si illustra il calcolo degli indici di vulnerabilità e delle accelerazioni di danno per la chiesa di Santa Maria del Borgo, attraverso la compilazione delle schede dette “di II livello”, secondo quanto indicato nelle Linee Guida. Nel terzo capitolo viene riportato il calcolo del moltiplicatore di collasso a ribaltamento della facciata della chiesa. Su questo elemento si è incentrata l’attenzione nel presente lavoro. A causa della complessità dello schema strutturale della facciata connessa ad altri elementi dell’edificio, si è fatto uso del codice di calcolo agli elementi finiti ABAQUS. Della modellazione del materiale e del settaggio dei parametri del software si è discusso nel quarto capitolo. Nel quinto capitolo si illustra l’analisi condotta tramite ABAQUS sullo stesso schema della facciata utilizzato per il calcolo manuale nel capitolo tre: l’utilizzo combinato dell’analisi cinematica e del metodo agli elementi finiti permette per esempi semplici di convalidare i risultati ottenibili con un’analisi non-lineare agli elementi finiti e di estenderne la validità a schemi più completi e più complessi. Nel sesto capitolo infatti si riportano i risultati delle analisi condotte con ABAQUS su schemi strutturali in cui si considerano anche gli elementi connessi alla facciata. Si riesce in questo modo ad individuare con chiarezza il meccanismo di collasso di più facile attivazione per la facciata e a trarre importanti informazioni sul comportamento strutturale delle varie parti, anche in vista di un intervento di ristrutturazione e miglioramento sismico.

Snap-shot multispectral imaging of vascular dynamics in a mouse window-chamber model.

Understanding tumor vascular dynamics through parameters such as blood flow and oxygenation can yield insight into tumor biology and therapeutic response. Hyperspectral microscopy enables optical detection of hemoglobin saturation or blood velocity by either acquiring multiple images that are spectrally distinct or by rapid acquisition at a single wavelength over time. However, the serial acquisition of spectral images over time prevents the ability to monitor rapid changes in vascular dynamics and cannot monitor concurrent changes in oxygenation and flow rate. Here, we introduce snap shot-multispectral imaging (SS-MSI) for use in imaging the microvasculature in mouse dorsal-window chambers. By spatially multiplexing spectral information into a single-image capture, simultaneous acquisition of dynamic hemoglobin saturation and blood flow over time is achieved down to the capillary level and provides an improved optical tool for monitoring rapid in vivo vascular dynamics.

Review of Managing the Fraud Risk in the Disaster Supplemental Nutrition Assistance Program (D-SNAP), Administered by the Department of Social Services

This review was initiated based upon allegations from multiple sources of possible fraud in the Disaster Supplemental Nutrition Assistance Program (D-SNAP) administered by the South Carolina Department of Social Services (SCDSS), which was implemented in response to the 10/3/2015 statewide flooding from Hurricane Joaquin. This review’s scope and objectives were: Assess SCDSS’s D-SNAP implementation for compliance with federal guidelines, with emphasis on fraud preventative controls; Assess the SCDSS’s post-disaster review and audit methodology for compliance with federal guidelines, with emphasis on understanding the fraud risks and resolution strategies; and Identify residual risk/suspected fraud not addressed through the SCDSS review and available opportunities to address.