Aço inox bactericida

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bactericidal stainless steel

Coatings are largely used in industries. However the development of new materials with improved properties still feeds a continuous need for performance, cost or endurance, the coatings are obtained by a hybrid material, organic-inorganic, and this polymer is applied on metallic, ceramic and glassy surfaces. The material generated in-situ on the desired surface has a nanometric structure. Results in abrasion loss (according ASTM standards) showed that the coatings improve the abrasion resistance of stainless steel by 30%, and also, diminish oxidization and surface rugosity.

Síntese de cerâmicas nanoestruturadas híbridas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Clean intermittent self-catheterization after botulinum neurotoxin type A injections: short-term effect on quality of life

OBJECTIVE: To investigate the hypothesis that the need for clean intermittent self-catheterization after botulinum neurotoxin type A injections is outweighed by the efficacy of this treatment, so that clean intermittent self-catheterization is not a burden for patients with refractory idiopathic detrusor overactivity. METHODS: Women undergoing intradetrusor injections of 200 units botulinum neurotoxin type A for refractory idiopathic detrusor overactivity were evaluated prospectively. Clean intermittent self-catheterization was discussed with all patients and its possible need after botulinum neurotoxin type A treatment. As indicator of quality of life, lower urinary tract symptom distress and effect on daily activities were assessed using the validated Urogenital Distress Inventory (UDI-6) and Incontinence Impact Questionnaire (IIQ-7) before and 4 weeks after receiving botulinum neurotoxin type A injections. RESULTS: Mean age of the 65 women was 51 years, and all voided spontaneously before botulinum neurotoxin type A injections. After botulinum neurotoxin type A treatment, 28 (43%) required clean intermittent self-catheterization. Mean UDI-6 and IIQ-7 scores reduced from 61 to 33 (P<.001) and 62 to 30 (P<.001) in women performing clean intermittent self-catheterization and from 60 to 28 (P<.001) and 64 to 25 (P<.001) in those who did not, respectively. Comparison of quality of life in women performing clean intermittent self-catheterization and in those who did not revealed no significant differences before and after botulinum neurotoxin type A treatment. CONCLUSION: Clean intermittent self-catheterization after botulinum neurotoxin type A intradetrusor injections did not impair quality of life in appropriately informed and selected women in the short term. All patients should be informed of the potential need for clean intermittent self-catheterization after botulinum neurotoxin type A injections, and a willingness to do so should be a prerequisite for this still unlicensed off-label treatment.

Clean intermittent self-catheterization: a burden for the patient?

AIM: To assess patients' perception of clean intermittent self-catheterization (CISC) for voiding dysfunction. PATIENTS AND METHODS: A total of 101 patients performing CISC because of voiding dysfunction were invited to participate in this questionnaire survey. The response rate was 91% (92/101). RESULTS: The mean time over which CISC was performed was 5 years (standard deviation (SD) +/- 6.3) and the mean frequency of CISC per day was three times (SD +/- 2). Almost 80% (72/92) of the patients perceived CISC as easy or very easy and CISC did not interfere at all or interfered a little bit with work or other regular daily activities in more than 80% (76/92). Almost 90% (80/92) reported no or minimal pain while performing CISC. This did not interfere at all or interfered a little bit with work or other regular daily activities in almost 90% (80/92). Quality of life improved considerably due to CISC in more than 60% (56/92) and 12% (11/92) complained of a deterioration. In multivariable analysis, severe pain performing CISC (odds ratio 20.9, 95% confidence interval 1.7-259.9, P = 0.018) was the only factor that predicted poor quality of life. CONCLUSIONS: The majority of patients considered CISC to be an easy and painless procedure which did not interfere with daily activities. Consequently, quality of life improved in more than 60% of the patients. Therefore, CISC does not appear to be a burden for the patient and, from a patient's perspective, can be recommended.

Anisotropic Confinement, Electronic Coupling and Strain Induced Effects Detected by Valence-Band Anisotropy in Self-Assembled Quantum Dots

A method to determine the effects of the geometry and lateral ordering on the electronic properties of an array of one-dimensional self-assembled quantum dots is discussed. A model that takes into account the valence-band anisotropic effective masses and strain effects must be used to describe the behavior of the photoluminescence emission, proposed as a clean tool for the characterization of dot anisotropy and/or inter-dot coupling. Under special growth conditions, such as substrate temperature and Arsenic background, 1D chains of In(0.4)Ga(0.6) As quantum dots were grown by molecular beam epitaxy. Grazing-incidence X-ray diffraction measurements directly evidence the strong strain anisotropy due to the formation of quantum dot chains, probed by polarization-resolved low-temperature photoluminescence. The results are in fair good agreement with the proposed model.

Development of Self-Cleaning Box Culvert Design – Phase II, TR-619, 2013

Culverts are common means to convey flow through the roadway system for small streams. In general, larger flows and road embankment heights entail the use of multibarrel culverts (a.k.a. multi-box) culverts. Box culverts are generally designed to handle events with a 50-year return period, and therefore convey considerably lower flows much of the time. While there are no issues with conveying high flows, many multi-box culverts in Iowa pose a significant problem related to sedimentation. The highly erosive Iowa soils can easily lead to the situation that some of the barrels can silt-in early after their construction, becoming partially filled with sediment in few years. Silting can reduce considerably the capacity of the culvert to handle larger flow events. Phase I of this Iowa Highway Research Board project (TR-545) led to an innovative solution for preventing sedimentation. The solution was comprehensively investigated through laboratory experiments and numerical modeling aimed at screening design alternatives and testing their hydraulic and sediment conveyance performance. Following this study phase, the Technical Advisory Committee suggested to implement the recommended sediment mitigation design to a field site. The site selected for implementation was a 3-box culvert crossing Willow Creek on IA Hwy 1W in Iowa City. The culvert was constructed in 1981 and the first cleanup was needed in 2000. Phase II of the TR 545 entailed the monitoring of the site with and without the selfcleaning sedimentation structure in place (similarly with the study conducted in laboratory). The first monitoring stage (Sept 2010 to December 2012) was aimed at providing a baseline for the operation of the as-designed culvert. In order to support Phase II research, a cleanup of the IA Hwy 1W culvert was conducted in September 2011. Subsequently, a monitoring program was initiated to document the sedimentation produced by individual and multiple storms propagating through the culvert. The first two years of monitoring showed inception of the sedimentation in the first spring following the cleanup. Sedimentation continued to increase throughout the monitoring program following the depositional patterns observed in the laboratory tests and those documented in the pre-cleaning surveys. The second part of Phase II of the study was aimed at monitoring the constructed self-cleaning structure. Since its construction in December 2012, the culvert site was continuously monitored through systematic observations. The evidence garnered in this phase of the study demonstrates the good performance of the self-cleaning structure in mitigating the sediment deposition at culverts. Besides their beneficial role in sediment mitigation, the designed self-cleaning structures maintain a clean and clear area upstream the culvert, keep a healthy flow through the central barrel offering hydraulic and aquatic habitat similar with that in the undisturbed stream reaches upstream and downstream the culvert. It can be concluded that the proposed self-cleaning structural solution “streamlines” the area upstream the culvert in a way that secures the safety of the culvert structure at high flows while producing much less disturbance in the stream behavior compared with the current constructive approaches.

Bond strength of orthodontic brackets using different light and self-curing cements

The purpose of the study was to evaluate the shear bond strength of stainless steel orthodontic brackets directly bonded to extracted human premolar teeth. Fifty teeth were randomly divided into ¿ve groups: (1) System One (chemically cured composite resin), (2) Light Bond (light-cured composite resin), (3) Vivaglass Cem (self-curing glass ionomer cement), (4) Fuji Ortho LC (light-cured glass ionomer cement) used after 37% orthophosphoric acid¿etching of enamel (5) Fuji Ortho LC without orthophosphoric acid¿etching. The brackets were placed on the buccal and lingual surfaces of each tooth, and the specimens were stored in distilled water (24 hours) at 378C and thermocycled. Teeth were mounted on acrylic block frames, and brackets were debonded using an Instron machine. Shear bond strength values at fracture (Nw)were recorded. ANOVA and Student-Newman-Keuls multiple comparison tests were performed (P , .05). Bonding failure site was recorded by stereomicroscope and analyzed by Chi-square test, selected specimens of each group were observed by scanning electron microscope. System One attained the highest bond strength. Light Bond and Fuji Ortho LC, when using an acid-etching technique, obtained bond strengths that were within the range of estimated bond strength values for successful clinical bonding. Fuji Ortho LC and Vivaglass Cem left an almost clean enamel surface after debracketing.

Parenting, self-regulation and childhood anxiety : A Self-Determination Theory perspective

Le contrôle psychologique parental est un facteur de risque réputé pour les problèmes intériorisés des enfants (p. ex., Affrunti & Ginsburg, 2011; McLeod, Wood & Weisz, 2007). Selon la Théorie de l'auto-détermination, le contrôle psychologique mène aux problèmes intériorisés (Ryan, Deci, Grolnick, & La Guardia, 2006) car il brime le besoin fondamental d'autonomie. En effet, recevoir de la pression afin de penser, se comporter et se sentir d’une certaine façon (Ryan, 1982) semble favoriser une régulation trop rigide et surcontrôlée (Ryan et al., 2006). Suite aux travaux de Soenens et Vansteenkiste (2010), la distinction conceptuelle entre deux formes de contrôle psychologique, soit manifestes (p. ex., les menaces, forcer physiquement) et dissimulées (p. ex., la surprotection, le marchandage), ont été utilisées pour évaluer le style parental (Étude 1) et les pratiques disciplinaires (Étude 2). Le contrôle psychologique parental et le soutien de l'autonomie (Étude 2) ont été mesurés durant la petite enfance puisque (1) les problèmes intériorisés émergent tôt, (2) le développement du sentiment d'autonomie est central au cours de cette période, et (3) attire probablement plus de contrôle psychologique parental. Avec ses deux articles, la présente thèse vise à clarifier la façon dont le contrôle psychologique manifeste et dissimulé est lié au développement précoce de problèmes intériorisés. L'étude 1 est une étude populationnelle examinant l'impact relatif du style parental sur des trajectoires développementales d'anxiété (N = 2 120 enfants; de 2,5 à 8 ans) avec de nombreux facteurs de risque potentiels provenant de l'enfant, de la mère et de la famille, tous mesurés au cours de la petite enfance. Les résultats ont montré qu'en plus de la timidité des enfants, de la dépression maternelle et du dysfonctionnement familial, le contrôle psychologique manifeste (c.-à-d., coercitif) et dissimulé (c.-à-d., la surprotection) augmentent le risque, pour les enfants, de suivre une trajectoire d'anxiété élevée. Une interaction entre la dépression maternelle et le contrôle dissimulé a été trouvée, ce qui indique que la surprotection augmente l'anxiété des enfants seulement lorsque la dépression maternelle est élevée. Enfin, le contrôle dissimulé prédit également l'anxiété telle que rapportée par les enseignants de deuxième année. Le deuxième article est une étude observationnelle qui examine comment l'autorégulation (AR) des bambins est liée au développement précoce des symptômes intériorisés, tout en explorant comment les pratiques disciplinaires parentales (contrôle et soutien de l'autonomie) y sont associées. Les pratiques parentales ont été codifiées lors d'une requête de rangement à 2 ans (contexte "Do", N = 102), tandis que l'AR des bambins a été codifiée à la fois durant la tâche de rangement ("Do") et durant une tâche d'interdiction (ne pas toucher à des jouets attrayants; contexte «Don't » ), à 2 ans puis à 3 ans. Les symptômes d'anxiété / dépression des enfants ont été évalués par leurs parents à 4,5 ans. Les résultats ont révélé que l'AR aux interdictions à 3 ans diminue la probabilité des enfants à manifester des taux élevés de symptômes d'anxiété / dépression. Les analyses ont aussi révélé que le parentage soutenant l'autonomie était lié à l'AR des enfants aux requêtes, un an plus tard. En revanche, le contrôle psychologique manifeste et dissimulé ont eu des effets délétères sur l'AR. Enfin, seul le contrôle dissimulé a augmenté les probabilités de présenter des niveaux plus élevés de problèmes intériorisés et ce, au-delà de l’effet protecteur de l'AR des bambins. Des résultats mitigés sont issus de cette thèse concernant les effets respectifs des deux formes de contrôle sur les problèmes intériorisés, dépendamment de l'informateur (mère c. enseignant) et de la méthodologie (questionnaires c. données observationnelles). Toutefois, le contrôle psychologique dissimulé était lié à ce problème affectif dans les deux études. Enfin, le soutien à l'autonomie s’est révélé être un facteur de protection potentiel et mériterait d'être étudié davantage.

Self-assembled biomimetic [2Fe2S]-hydrogenase-based photocatalyst for molecular hydrogen evolution

The large-scale production of clean energy is one of the major challenges society is currently facing. Molecular hydrogen is envisaged as a key green fuel for the future, but it becomes a sustainable alternative for classical fuels only if it is also produced in a clean fashion. Here, we report a supramolecular biomimetic approach to form a catalyst that produces molecular hydrogen using light as the energy source. It is composed of an assembly of chromophores to a bis(thiolate)-bridged diiron ([2Fe2S]) based hydrogenase catalyst. The supramolecular building block approach introduced in this article enabled the easy formation of a series of complexes, which are all thoroughly characterized, revealing that the photoactivity of the catalyst assembly strongly depends on its nature. The active species, formed from different complexes, appears to be the [Fe-2(mu-pdt)(CO)(4){PPh2(4-py)}(2)] (3) with 2 different types of porphyrins (5a and 5b) coordinated to it. The modular supramolecular approach was important in this study as with a limited number of building blocks several different complexes were generated.

Removal of sunscreen compounds from swimming pool water using self-organized TiO2 nanotubular array electrodes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A Dielectric Model of Self-Assembled Monolayer Interfaces by Capacitive Spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Capacitance Spectroscopy: A Versatile Approach To Resolving the Redox Density of States and Kinetics in Redox-Active Self-Assembled Monolayers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Green synthesis of gold nanoparticles with self-sustained natural rubber membranes

Green chemistry is an innovative way to approach the synthesis of metallic nanostructures employing eco-friendly substances (natural compounds) acting as reducing agents. Usually, slow kinetics are expected due to, use of microbiological materials. In this report we study composites of natural rubber (NR) membranes fabricated using latex from Hevea brasiliensis trees (RRIM 600) that works as reducing agent for the synthesis of gold nanoparticles. A straight and clean method is presented, to produce gold nanoparticles (AuNP) in a flexible substrate or in solution, without the use of chemical reducing reagents, and at the same time providing good size's homogeneity, reproducibility, and stability of the composites. Copyright © 2013 Flávio C. Cabrera et al.

Atomic-scale characterization of diamond surfaces and fullerene self-assembly

In this thesis, elemental research towards the implantation of a diamond-based molecular quantum computer is presented. The approach followed requires linear alignment of endohedral fullerenes on the diamond C(100) surface in the vicinity of subsurface NV-centers. From this, four fundamental experimental challenges arise: 1) The well-controlled deposition of endohedral fullerenes on a diamond surface. 2) The creation of NV-centers in diamond close to the surface. 3) Preparation and characterization of atomically-flat diamondsurfaces. 4) Assembly of linear chains of endohedral fullerenes. First steps to overcome all these challenges were taken in the framework of this thesis. Therefore, a so-called “pulse injection” technique was implemented and tested in a UHV chamber that was custom-designed for this and further tasks. Pulse injection in principle allows for the deposition of molecules from solution onto a substrate and can therefore be used to deposit molecular species that are not stable to sublimation under UHV conditions, such as the endohedral fullerenes needed for a quantum register. Regarding the targeted creation of NV-centers, FIB experiments were carried out in cooperation with the group of Prof. Schmidt-Kaler (AG Quantum, Physics Department, Johannes Gutenberg-Universität Mainz). As an entry into this challenging task, argon cations were implanted into (111) surface-oriented CaF2 crystals. The resulting implantation spots on the surface were imaged and characterized using AFM. In this context, general relations between the impact of the ions on the surface and their valency or kinetic energy, respectively, could be established. The main part of this thesis, however, is constituted by NCAFM studies on both, bare and hydrogen-terminated diamond C(100) surfaces. In cooperation with the group of Prof. Dujardin (Molecular Nanoscience Group, ISMO, Université de Paris XI), clean and atomically-flat diamond surfaces were prepared by exposure of the substrate to a microwave hydrogen plasma. Subsequently, both surface modifications were imaged in high resolution with NC-AFM. In the process, both hydrogen atoms in the unit cell of the hydrogenated surface were resolved individually, which was not achieved in previous STM studies of this surface. The NC-AFM images also reveal, for the first time, atomic-resolution contrast on the clean, insulating diamond surface and provide real-space experimental evidence for a (2×1) surface reconstruction. With regard to the quantum computing concept, high-resolution NC-AFM imaging was also used to study the adsorption and self-assembly potential of two different kinds of fullerenes (C60 and C60F48) on aforementioned diamond surfaces. In case of the hydrogenated surface, particular attention was paid to the influence of charge transfer doping on the fullerene-substrate interaction and the morphology emerging from self-assembly. Finally, self-assembled C60 islands on the hydrogen-terminated diamond surface were subject to active manipulation by an NC-AFM tip. Two different kinds of tip-induced island growth modes have been induced and were presented. In conclusion, the results obtained provide fundamental informations mandatory for the realization of a molecular quantum computer. In the process it was shown that NC-AFM is, under proper circumstances, a very capable tool for imaging diamond surfaces with highest resolution, surpassing even what has been achieved with STM up to now. Particular attention was paid to the influence of transfer doping on the morphology of fullerenes on the hydrogenated diamond surface, revealing new possibilities for tailoring the self-assembly of molecules that have a high electron affinity.