Metric Training for the Transportation Industry Module III - Road and Bridge Design, HR-376

"Metric Training For The Highway Industry", HR-376 was designed to produce training materials for the various divisions of the Iowa DOT, local government and the highway construction industry. The project materials were to be used to introduce the highway industry in Iowa to metric measurements in their daily activities. Five modules were developed and used in training over 1,000 DOT, county, city, consultant and contractor staff in the use of metric measurements. The training modules developed deal with the planning through operation areas of highway transportation. The materials and selection of modules were developed with the aid of an advisory personnel from the highway industry. Each module is design as a four hour block of instruction and a stand along module for specific types of personnel. Each module is subdivided into four chapters with chapter one and four covering general topics common to all subjects. Chapters two and three are aimed at hands on experience for a specific group and subject. This module includes: Module 3 - Road and Bridge Design. This module provides hands on examples of how to use metric measurements in the design of roads and structures.

The road and bridge laws of Ohio : and the common law of roads, ways and highways ... with numerous forms, notes of decisions, opinions of attorneys-general, practical suggestions, etc. /

A revision of the author's "The laws relating to roads and ditches, bridges and water-courses in the state of Ohio" issued in 1886.

Standard specifications for road and bridge construction.

"Supplemental specifications. Addenda and amendments to 1959 edition of Standard specifications ..." (1 v. (loose leaf)), issued 1959.

Road and bridge administration, purchasing organization and methods, in Dallas County; report and summary. Report: Griffenhagen & Associates. Summary: Greater Dallas Planning Council Advisory Committee.

At head of title. W. Dallas County, Texas.

Road and bridge construction specifications for AASHO road test project.

Research authority: National Academy of Sciences, Highway Research Board.

Standard specifications for road and bridge construction /

Description based on: Adopted Jan. 2, 1971.

Standard specifications for road and bridge construction.

Mode of access: Internet.

Total Cost of Transportation Analysis of Road and Highway Issues, HR-388, 2002

In the administration, planning, design, and maintenance of road systems, transportation professionals often need to choose between alternatives, justify decisions, evaluate tradeoffs, determine how much to spend, set priorities, assess how well the network meets traveler needs, and communicate the basis for their actions to others. A variety of technical guidelines, tools, and methods have been developed to help with these activities. Such work aids include design criteria guidelines, design exception analysis methods, needs studies, revenue allocation schemes, regional planning guides, designation of minimum standards, sufficiency ratings, management systems, point based systems to determine eligibility for paving, functional classification, and bridge ratings. While such tools play valuable roles, they also manifest a number of deficiencies and are poorly integrated. Design guides tell what solutions MAY be used, they aren't oriented towards helping find which one SHOULD be used. Design exception methods help justify deviation from design guide requirements but omit consideration of important factors. Resource distribution is too often based on dividing up what's available rather than helping determine how much should be spent. Point systems serve well as procedural tools but are employed primarily to justify decisions that have already been made. In addition, the tools aren't very scalable: a system level method of analysis seldom works at the project level and vice versa. In conjunction with the issues cited above, the operation and financing of the road and highway system is often the subject of criticisms that raise fundamental questions: What is the best way to determine how much money should be spent on a city or a county's road network? Is the size and quality of the rural road system appropriate? Is too much or too little money spent on road work? What parts of the system should be upgraded and in what sequence? Do truckers receive a hidden subsidy from other motorists? Do transportation professions evaluate road situations from too narrow of a perspective? In considering the issues and questions the author concluded that it would be of value if one could identify and develop a new method that would overcome the shortcomings of existing methods, be scalable, be capable of being understood by the general public, and utilize a broad viewpoint. After trying out a number of concepts, it appeared that a good approach would be to view the road network as a sub-component of a much larger system that also includes vehicles, people, goods-in-transit, and all the ancillary items needed to make the system function. Highway investment decisions could then be made on the basis of how they affect the total cost of operating the total system. A concept, named the "Total Cost of Transportation" method, was then developed and tested. The concept rests on four key principles: 1) that roads are but one sub-system of a much larger 'Road Based Transportation System', 2) that the size and activity level of the overall system are determined by market forces, 3) that the sum of everything expended, consumed, given up, or permanently reserved in building the system and generating the activity that results from the market forces represents the total cost of transportation, and 4) that the economic purpose of making road improvements is to minimize that total cost. To test the practical value of the theory, a special database and spreadsheet model of Iowa's county road network was developed. This involved creating a physical model to represent the size, characteristics, activity levels, and the rates at which the activities take place, developing a companion economic cost model, then using the two in tandem to explore a variety of issues. Ultimately, the theory and model proved capable of being used in full system, partial system, single segment, project, and general design guide levels of analysis. The method appeared to be capable of remedying many of the existing work method defects and to answer society's transportation questions from a new perspective.

Public and Private Sector Decision Makers Within the Rail Baltica Growth Corridor

Transport volumes have increased and will continue to increase in European Union. Even though the growth has not been equal between different transport modes. Most of the growth has been faced on road transport. European Union aims to balance the unbalanced market shares between the modes by gaining and supporting the competitiveness of railway and waterway transport. In EU railway transportation is seen as solution to increase safety in traffic and decrease the environmental impacts of transportation. The aim of this research is to figure out how it is possible to decrease the environmental impacts by the technology already in use. Main focus of this research is in intermodality and combining the road and railway transportation. This study aims also to figure out demands and expectations towards new Rail Baltica railway route connecting Tallinn and Berlin. The research is conducted by performing a literature review about decreasing environmental impacts and combining road and rail transport. Another viewpoint is taken from the possible effects of tourism to the passenger transport on rails. Knowledge gained by literature review is deepened by additional internet questionnaire study and expert interview study. In decreasing the environmental impacts of transportation electric trains are definitely the best option providing that the electricity is generated from renewable or carbon dioxide free sources. Decrease of environmental impacts has been reached also with acceptance of larger road transport vehicles. According to interviewed passenger transport experts, the whole route from Tallinn to Berlin may not be convenient to be used in passenger transport, just because the route is too long.. In EU freight is transported mainly with semi-trailer combinations, and that is why it could be logical if huckepack trains would be used on Rail Baltica. Huckepack train allows semi-trailers to be transported on rails with time efficient loading-unloading process. Overall, Rail Baltica project is experienced as a future-oriented one and new railway alignment is seen as great alternative option for transport modes using fossil fuels.

Future cenario planning in Brazilian logistics and transportation sector

Nas últimas décadas o setor de logística passou por grandes transformações pelo mundo. Assim, a eficiência do sistema logístico é importante para o crescimento econômico, a diversificação, redução dos custos operacionais e da pobreza. Segundo o Banco Mundial, o Brasil tornou-se uma das maiores economias do mundo, mas os custos logísticos elevados colocam em risco esse crescimento. Estes custos são em grande parte o resultado de diferenças em infraestrutura de cada região, juntamente com os encargos do setor rodoviário, que corresponde por 60% do total do transporte de carga do país. Entretanto, a logística brasileira está às portas de uma nova revolução, em práticas de negócios e eficiência, e também na qualidade e disponibilidade da infraestrutura de transportes e comunicações, e novos projetos e práticas para superar a situação. O objetivo deste estudo não é analisar o presente e as atuais tendências de logística do Brasil e do setor de transporte, mas sim modelar possíveis cenários futuros para os próximos anos. Em outras palavras, este trabalho mostra diferentes possibilidades de como o setor de logística e transporte poderá ser no futuro. Para isso, este trabalho irá utilizar a metodologia de cenários prospectivos e entrevistas com especialistas relacionados da área.

Concessions and road and rail transport optimization

Includes bibliography

Dynamic analysis of road vehicle-bridge systems under turbulent wind by means of Finite Element Models

When an automobile passes over a bridge dynamic effects are produced in vehicle and structure. In addition, the bridge itself moves when exposed to the wind inducing dynamic effects on the vehicle that have to be considered. The main objective of this work is to understand the influence of the different parameters concerning the vehicle, the bridge, the road roughness or the wind in the comfort and safety of the vehicles when crossing bridges. Non linear finite element models are used for structures and multibody dynamic models are employed for vehicles. The interaction between the vehicle and the bridge is considered by contact methods. Road roughness is described by the power spectral density (PSD) proposed by the ISO 8608. To consider that the profiles under right and left wheels are different but not independent, the hypotheses of homogeneity and isotropy are assumed. To generate the wind velocity history along the road the Sandia method is employed. The global problem is solved by means of the finite element method. First the methodology for modelling the interaction is verified in a benchmark. Following, the case of a vehicle running along a rigid road and subjected to the action of the turbulent wind is analyzed and the road roughness is incorporated in a following step. Finally the flexibility of the bridge is added to the model by making the vehicle run over the structure. The application of this methodology will allow to understand the influence of the different parameters in the comfort and safety of road vehicles crossing wind exposed bridges. Those results will help to recommend measures to make the traffic over bridges more reliable without affecting the structural integrity of the viaduct

Tuberculosis and health sector reform: experience of integrating tuberculosis services into the district health system in rural South Africa

SETTING: Hlabisa health district, South Africa. OBJECTIVE: To describe the integration of a vertical tuberculosis control programme into an emerging 'horizontal' district health system, within the context of health sector reform. DESIGN: Descriptive account of the process of integration of the programme into the health system. RESULTS: A highly 'vertical' system of delivering tuberculosis treatment (with poor programme outcomes) was converted into a (horizontal' team, integrated within the district health system, that used available resources such as village clinics and community health workers, with improved programme outcomes. CONCLUSIONS: In some settings at least, integration of tuberculosis 'programmes' into the district health system as tuberculosis 'teams' is feasible, and may produce highly cost-effective outcomes.

Mapping the royal road and other hierarchical functions

In this paper we present a technique for visualising hierarchical and symmetric, multimodal fitness functions that have been investigated in the evolutionary computation literature. The focus of this technique is on landscapes in moderate-dimensional, binary spaces (i.e., fitness functions defined over {0, 1}(n), for n less than or equal to 16). The visualisation approach involves an unfolding of the hyperspace into a two-dimensional graph, whose layout represents the topology of the space using a recursive relationship, and whose shading defines the shape of the cost surface defined on the space. Using this technique we present case-study explorations of three fitness functions: royal road, hierarchical-if-and-only-if (H-IFF), and hierarchically decomposable functions (HDF). The visualisation approach provides an insight into the properties of these functions, particularly with respect to the size and shape of the basins of attraction around each of the local optima.

Promoting Portuguese exports to Germany: A hand-on approach for the machinery and equipment sector

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics