The WTO’s Trade Policy Review Mechanism – An Effective Surveillance Mechanism for Aid for Trade?

There has always been a question mark over how best to integrate developing countries into the world trading system and traditionally the WTO has used special and differential treatment (S&D) to do so. However, since 1996 the WTO has been involved with the Aid for Trade (AfT) initiative typically co-ordinated by the OECD and UN. This article firstly outlines the background to AfT since 1996 under the numerous agencies working in the area, highlighting how importance has always been placed on the monitoring and effectiveness of the process. It then turns to assessing the various methods currently used and the proposal of the WTO’s Trade Policy Review Mechanism (TPRM) as a potential monitoring tool of AfT.

Taking statutory adjudication to the next level: a proposal for review mechanism of erroneous determinations

Statutory adjudication was introduced in the security of payment legislation to quickly and fairly resolve payment disputes in the construction industry. One of the interesting features in some legislation is the availability of an express limited right of aggrieved parties to apply for review against erroneous adjudication decisions. In Singapore, the legislation has no equivalent elsewhere in that it provides for a full review mechanism of erroneous determinations considering the fact that adjudicators often have to grapple with complex issues as sheer volume of documents within a very tight timeframe. This paper discusses the various review mechanisms of erroneous adjudication determinations then asks the question as to whether an appropriately devised legislative review mechanism on the merits, should be an essential characteristic of any effective statutory adjudication scheme. The paper concludes by making the case that an appropriately designed review mechanism as proposed in the paper could be the most pragmatic and effective measure to improve the quality of adjudication outcome and increase the disputants' confidence in statutory adjudication. This paper is based upon a paper by the author which received a High Commendation in the Student Division of the Society of Construction Law Australia Brooking Prize for 2016.

La souveraineté de l'État et le droit à des élections libres dans le contexte européen : essai fondé sur la jurisprudence de la Cour européenne des droits de l'Homme (1987-2008)

L'une des critiques fondamentales adressées au mécanisme de contrôle et de surveillance de la Cour européenne des droits de l'homme en matière électorale tient au risque qu'il portera atteinte à la souveraineté de l'État. En effet, certains auteurs estiment que l'autonomie constitutionnelle de l'État dans le domaine électoral, jusqu'à tout récemment strictement protégée, s'affaiblit sous l'influence de la protection des droits de l'homme dans le système européen. Le présent mémoire a pour but de déterminer les conditions imposées aux autorités étatiques par la Cour européenne des droits de l'homme en vue d'assurer l'exercice efficace du droit à des élections libres. Ensuite, il analysera les effets de ces conditions sur la souveraineté des États parties à la Convention européenne des droits de l'homme. Notre étude s'intéresse, dans un premier temps, à l'examen du principe de la souveraineté de l'État et de son évolution progressive sous l'influence des droits de l'homme. Dans un deuxième temps, elle présentera le droit à des élections libres et ses manifestations théoriques et jurisprudentielles. L'étude des affaires tranchées par la Cour européenne permettra de remarquer que la déférence qui est accordée à la souveraineté des États s'accompagne d'une certaine limitation de la marge d'appréciation des autorités étatiques en cas de privation de l'exercice efficace du droit à des élections libres. Ensuite, les acquis théoriques et conceptuels seront appliqués à l'étude des restrictions électorales relevant des mesures législatives, administratives et judiciaires des États ainsi que des conditions imposées par la Cour européenne. À cet égard, l'analyse de ces conditions nous permettra de saisir l'étendue de la limitation de la liberté d'action des États en matière électorale. Cette recension analytique nous permettra de conclure que le mécanisme de contrôle de la Cour européenne entraîne de multiples effets limitatifs sur la souveraineté des États.

The relevancy and effectiveness of the United Nations Convention Against Corruption

La Convention des Nations Unies contre la corruption, adoptée en 2003, est le premier outil international criminalisant la corruption de façon aussi détaillée. Ce mémoire tente d'évaluer sa portée en analysant les dispositions concernant la prévention, la criminalisation, la coopération internationale et le recouvrement d'avoirs. Il tente d’évaluer la pertinence et l'efficacité de la Convention en illustrant ses défis en matière de conformité, pour ensuite étudier d'autres outils internationaux existants qui lui font compétition. Malgré sa portée élargie, il est débattu que la Convention souffre de lacunes non négligeables qui pourraient restreindre son impact à l'égard de la conduite d'États Membres.

¿Se han transformado las acciones populares con ocasión de los cambios normativos y jurisprudenciales ocurridos en el periodo 2006-2012?

El trabajo realizado tiene como objetivo revisar la problemática planteada en la jurisdicción contencioso administrativa, a través de un estudio concentrado de aspectos procesales esenciales en la estructura de la acción popular como (i) el incentivo (en este caso, se evaluará el impacto de su eliminación), (ii) la efectividad de la audiencia de pacto, (iii) las medidas cautelares como quiera que fueron objeto de modificación en la Ley 1437 de 2011 y por último, (iv) el estudio del mecanismo de revisión eventual incorporado en el año 2009 como mecanismo de unificación.

Latin America and the Caribbean in the World Economy 1999-2000

Includes bibliography

Special Tax Treatment as Trade Policy: A Database on Export Processing and Special Economic Zones

Many countries treat income generated via exports favourably, especially when production takes places in special zones known as export processing zones (EPZs). EPZs can be defined as specific, geographically defined zones or areas that are subject to special administration and that generally offer tax incentives, such as duty‐free imports when producing for export, exemption from other regulatory constraints linked to import for the domestic market, sometimes favourable treatment in terms of industrial regulation, and the streamlining of border clearing procedures. We describe a database of WTO Members that employ special economic zones as part of their industrial policy mix. This is based on WTO notification and monitoring through the WTO’s trade policy review mechanism (TPRM), supplemented with information from the ILO, World Bank, and primary sources. We also provide some rough analysis of the relationship between use of EPZs and the carbon intensity of exports, and relative levels of investment across countries with and without special zones.

Design and implementation of a clinical dashboard

In a large health care system, the importance of accurate information as feedback mechanisms about its performance is necessary on many levels from the senior level management to service level managers for valid decision-making purposes. The implementation of dashboards is one way to remedy the problem of data overload by providing up-to-date, accurate, and concise information. As this health care system seeks to have an organized, systematic review mechanism in place, dashboards are being created in a variety of the hospital service departments to monitor performance indicators. The Infection Control Administration of this health care system is one that does not currently utilize a dashboard but seeks to implement one. ^ The purpose of this project is to research and design a clinical dashboard for the Infection Control Administration. The intent is that the implementation and usefulness of the clinical dashboard translates into improvement in the measurement of health care quality.^

The WTO and Female Labor Rights in Developing Countries. IES WORKING PAPER 3/2008

The impacts of WTO on women’s labour rights in the developing countries have been raised to the international agenda by various nongovernmental organizations. On the one hand it is assumed that international trade policies are gender neutral. On the other hand a number of authors hold the view that the negative impacts of WTO policies are more pronounced on female than male workers. This paper takes a critical look at these claims. It argues that the impact of the WTO system, the driving force of trade liberalization, on women’s labour rights in the developing countries is a complicated issue, because the effects have been both negative and positive. In support of this claim, this paper first briefly reviews the international framework for the protection of women’s labour rights. Next, the WTO agreements and policies are analysed insofar as they are relevant for the protection of women’s labour rights. The analysis covers, for example, the use of the trade policy review mechanism and restrictions of trade on grounds of violation of public morals.. Finally, a case study is conducted on the situation of female workers in Bangladesh and Pakistan, countries that have recently undergone a liberalization of trade in the textiles and clothing sectors. It is concluded that the increase of international trade in the developing countries has created many work opportunities for women, helped them to become more independent and allowed them to participate in the society more actively. However, it is at the same time posited that in order to comply with its own objectives of raising standards of living and full employment, the WTO should engage itself in active policies to overcome the negative aspects of trade on female workers in the developing countries.

Australian security of payment legislation: impact of inconsistent case law

In Australia, a supreme court has a supervisory role over the statutory adjudication process that has been established within the security of payment legislation. In this role, the courts have quashed many adjudication determinations on the grounds of jurisdictional error in recent years. This is a problem as the courts’ involvement in statutory adjudication is contrary to the object of the legislation. When reviewing adjudication determinations, the courts have adopted different approaches with respect to determining the role of adjudicators and the essential jurisdictional facts that must exist in order for an adjudicator to have jurisdiction to hear a referred disputed matter. This diversification of judicial interpretation with respect to jurisdictional error is confusing, not only to construction professionals, but also to many lawyers. Via a desktop study– where the evidence is mainly garnered from case law, governmental reports and commentaries – this paper reviews the legal complexities involved in diagnosing jurisdictional errors. In doing so, the paper aims to answer the question as to why the adjudication process has become bogged down in the quagmire of judicial review. The paper concludes that the evolving inconsistency of case law in relation to statutory adjudication is a crucial factor contributing to the erosion of the object of the security of payment legislation in Australia. Moving forward, the paper argues that establishing a legislative review mechanism of jurisdictional challenges may be sufficient to address this problem.

Examining the approaches to diminish judicial intervention in statutory adjudication in Australia

In Australia, statutory construction adjudication is a fast payment dispute resolution process designed to keep the cash flowing down the hierarchical contractual chain in construction projects. Its rapid, highly regulatory and temporarily binding nature have led to it being often described as a ‘quick and dirty’ process that delivers ‘rough and ready’ justice. Adjudicators often have to grapple with complex legal issues related to jurisdictional facts and interpretation of contract provisions, though the majority of them are not legally trained. This has often led to a poor quality of adjudication outcome for large and complex payment claims which has, in turn, led to a mounting dissatisfaction due to the many judicial challenges to adjudicators’ determinations seen in recent years. The evolving tension between the object of the security of payment legislation and excessive involvement of the courts has often been the subject of comment by the judiciary. This paper aims to examine the legislative and judicial approaches to support the object of the security of payment legislation to ease cash flow. The paper adopts a desktop study approach whereby evidence is gathered from three primary sources – judicial decisions, academic publications and governmental reports. The paper concludes that there is a need to adopt other measures which can provide more convenient relief to aggrieved parties to an adjudication process, such that the adjudication process is kept away from the courts as far as is possible. Specifically, it is proposed that a well-designed expanded legislative review scheme of allegedly flawed adjudication, based on that provided in the Western Australian legislation, might stand as a promising remedy to eliminate the evolving tension.

The application of building information modelling in a construction project in China

Previous studies have proved the application of Building InformationModelling (BIM) can lead to greater efficiencies. Slowly adopting newtechnologies and limited technological innovation are criticised for theconstruction industry. In this paper, we present research that examinesthe practices of BIM technologies for the clash detection and coordination among building structure, equipment and pipelines, quantity statistics and construction simulation in a construction project in China. The BIM application significantly promotes the abilities to achieve construction schedule, quality, budget, and scope objectives in the project. The technological capabilities of BIM, the illegal issues of BIM outputs and developing cooperative project management culture are needed in order to promote BIM application in the construction industry.