Reversible regeneration of molybdenum carbonyl species on an alumina thin film

The thin alumina film-supported metallic molybdenum model catalyst was prepared by thermal decomposition of MO(CO)6, and CO chemisorption on the catalyst was investigated in-situ by thermal desorption spectroscopy (TDS) and X-ray photoelectron spectroscopy (XPS). The results showed that a molybdenum-carbonyl-like species was formed on the alumina surface at low temperature by high coordination of CO with the surface metallic molybdenum nanoparticles, indicating a reversible regeneration of molybdenum carbonyl on the alumina surface. CO chemisorption on the model catalyst surface caused the Mo 3d XPS peak to shift toward higher binding energy. The formed molybdenum carbonyl species appeared at about 240 K in the TDS. The supported metallic molybdenum nanoparticles were quite different from the bulk molybdenum in chemical properties, which indicated a prominent particle-size effect of the clusters.

Reversible CO2 absorption by the 6H perovskite Ba 4Sb2O9

A novel compound for carbon capture and storage (CCS) applications, the 6H perovskite Ba4Sb2O9, was found to be able to absorb CO2 through a chemical reaction at 873 K to form barium carbonate and BaSb2O6. This absorption was shown to be reversible through the regeneration of the original Ba4Sb 2O9 material upon heating above 1223 K accompanied by the release of CO2. A combined synchrotron X-ray diffraction, thermogravimetric, and microscopy study was carried out to characterize first the physical absorption properties and then to analyze the structural evolution and formation of phases in situ. Importantly, through subsequent carbonation and regeneration of the material over 100 times, it was shown that the combined absorption and regeneration reactions proceed without any significant reduction in the CO2 absorption capacity of the material. After 100 cycles the capacity of Ba4Sb2O9 was ∼0.1 g (CO 2)/g (sorbent), representing 73% of the total molar capacity. This is the first report of a perovskite-type material showing such good properties, opening the way for studies of new classes of inorganic oxide materials with stable and flexible chemical compositions and structures for applications in carbon capture. © 2013 American Chemical Society.

Novel furan polymer materials based on the reversible Diels-Alder reaction

A futura e inevitável escassez dos recursos fósseis, juntamente com o aumento imprevisível dos seus preços, levou, nas últimas décadas, a um aumento impressionante de iniciativas dedicadas não só à procura de fontes alternativas de fornecedores de energia, mas também de produtos químicos e polímeros a partir de fontes renováveis, em particular da biomassa vegetal. Entre estes, os polímeros derivados de monómeros furânicos constituem uma classe única de materiais cujas estruturas podem, em princípio, simular virtualmente os seus homólogos actualmente derivados de recursos fósseis. O anel furânico é uma estrutura heterocíclica com um carácter diénico pronunciado, o que torna-o um dieno particularmente apropriado para a reacção de Diels-Alder (DA) com dienófilos como a maleimida. Um dos aspectos mais relevantes da reacção de DA é a sua reversibilidade em função da temperatura, a qual permite que os aductos sejam facilmente revertidos nos seus precursores por aumento da temperatura (reacção de retro-DA). No caso específico da combinação furano-maleimida, a formação do aducto predomina até cerca de 60ºC, enquanto a reacção inversa é dominante acima de 100ºC. A combinação desta característica da reacção de DA com a química de compostos furânicos pode abrir um novo caminho para a preparação de materiais macromoleculares funcionais com base em fontes renováveis e com aplicações promissoras como auto-reparação e reciclabilidade. O principal objectivo desta Tese, é a síntese e caracterização de novos materiais poliméricos termo-reversíveis, aplicando a reacção de DA a monómeros complementares com estruturas dos tipos furânico (o dieno, designado por A) e de maleimida (o dienófilo, designado por B). A primeira etapa neste trabalho envolveu a síntese, purificação e caracterização de novos monómeros furânicos e de maleimida do tipo AA, A3, BB, B3, AB, AB2, cada um com diferentes grupos separadores das funções reactivas. Posteriormente, estes monómeros foram polimerizados e despolimerizados por ciclos de DA/retro-DA utilizando diferentes combinações. A formação e dissociação de todos os aductos de DA foram seguidas por ambas espectroscopias de UV e RMN de 1H. O primeiro sistema de DA estudado foi uma combinação modelo entre reagentes mono-funcionais (-A+-B), nomeadamente o acetato furfurílico (FA) e a N-metilmaleimida (MM), ambos comercialmente disponíveis. O objectivo desta abordagem foi estudar a cinética e o equilíbrio da formação/dissociação dos aductos de DA e obter indicações sobre as condições mais adequadas a serem usadas na preparação dos correspondentes novos materiais macromoleculares. Além disso, pretendia-se verificar a presença ou ausência de reacções secundárias que poderiam intervir em ambas as vias directa e inversa das reacções, mesmo após vários ciclos. A espectroscopia de UV forneceu informação quantitativa sobre a cinética de formação do aducto através da diminuição progressiva da absorvência máxima a 293 nm correspondente ao grupo maleimida, a diferentes temperaturas (35, 50, 65 ºC) Reciprocamente, a correspondente reacção de retro-DA foi seguida a 90 ºC através do aumento do mesmo pico. A reversibilidade destes sistemas foi verificada com sucesso após uma sequência de ciclos de DA/retro-DA. Adicionalmente, verificou-se que os espectros originaram um ponto isosbéstico, provando que estes sistemas não envolvem quaisquer reacções secundárias. Uma vez que foi usado um excesso de FA, as reacções de DA modelo apresentaram um comportamento cinético de pseudo-primeira ordem, com a constante de velocidade k mais alta (2.1x10-5 dm3mol-1s-1) para T=65 ºC. A correspondente energia de activação foi de 39.0 kJ.mol-1. A reacção de retro-DA seguiu um comportamento de primeira ordem, com constante de velocidade de 1.6x10-6 s-1. A evolução deste sistema por RMN de 1H a 65ºC deu-nos informações mais detalhadas sobre a sua evolução estrutural, ou seja, à medida que a intensidade dos picos atribuídos à formação do aducto aumentaram progressivamente ao longo do tempo, os pertencentes aos reagentes iniciais diminuiram proporcionalmente. O “rendimento final”, calculado após 20 dias à temperatura ambiente, foi de aproximadamente 70%. A reacção de retro-DA foi depois seguida a 90ºC, observando-se tal como na espectroscopia de UV, o deslocamento da reacção no sentido da regeneração dos reagentes de partida. A viabilidade de múltiplos ciclos de DA/retro-DA estabelecidos pela espectroscopia de UV foi igualmente confirmada por RMN de 1H. O passo seguinte envolveu o estudo de um sistema de policondensação linear baseado no crescimento gradual por reacção de DA entre um monómero bisfurânico A-A e um do tipo bismaleimida B-B, seguindo a mesma abordagem que no sistema modelo. O poliaducto linear foi obtido a partir de soluções equimolares dos monómeros, por reacção de DA a 65ºC. O progresso desta polimerização foi seguido por espectroscopia de UV e RMN de 1H e, mais qualitativamente, pelo aumento da viscosidade do meio. A reacção seguiu um comportamento de segunda ordem, com uma constante de velocidade de 9.4x10-6 dm3mol-1s-1, e observou-se novamente um ponto isosbéstico nos dados de UV. Os espectros de RMN apresentaram o padrão esperado, nomeadamente o aumento progressivo dos sinais associados ao aducto e a correspondente diminuição dos grupos furano e maleimida livres. A despolimerização do poliaducto através da reacção de retro-DA foi seguida a 110ºC usando as mesmas técnicas. Os dados de UV mostraram o retorno progressivo da absorção dos grupos de maleimida, seguindo um comportamento cinético de primeira ordem, com constante de velocidade de 2.5x10-6 s-1, até à completa regeneração de ambos os monómeros. Os espectros de RMN providenciaram mais uma vez informação estrutural sobre o progresso da despolimerização, a qual foi acompanhada por uma diminuição progressiva da viscosidade. Adicionalmente, para seguir a retro- DA, adicionou-se um excesso de composto furânico monofuncional, nomeadamente o 2,5-dimetilfurano (DMFu), ao sistema de modo a bloquear as funções maleimida complementares, evitando assim a repolimerização após arrefecimento. Os productos isolados foram então o monómero bisfurânico AA, DMFu que não reagiu e o bisaducto não-polimerizável de BB com DMFu. Este resultado indicou claramente que o polímero foi de facto revertido nos seus monómeros durante a reacção de retro-DA. O terceiro sistema estudado foi outra polimerização linear, seguindo as mesmas condições experimentais que os anteriores, mas com uma estratégia diferente de modo a contornar o problema clássico de assegurar a estequiometria exacta dos monómeros. As estruturas dos monómeros utilizados incorporam ambos os grupos reactivos, i.e, moléculas do tipo A-B. A polimerização prematura destes monómeros intrinsecamente reactivos foi evitada com a protecção do grupo maleimida na forma de um aducto de DA com furano, até a incorporação do substituinte furânico na outra extremidade. Portanto, a policondensação destes monómeros foi iniciada após a desprotecção in situ deste composto mediante aquecimento, seguido de arrefecimento até à temperatura adequada para polimerizar. Os resultados obtidos por UV e RMN sugerem que de facto o uso de monómeros do tipo A-B oferece um melhor sistema linear. Em seguida, foram estudados sistemas de policondensação não-linear por reacção de DA, entre monómeros (um ou ambos) com funcionalidade superior a dois, nomeadamente sistemas do tipo A3+B-B ou A-A+B3, seguindo mais uma vez as mesmas condições experimentais. Uma vez que utilizam monómeros complementares contendo, em média, mais de duas funcionalidades, estes sistemas conduzem a materiais reticulados. Nestes estudos, foram usadas três razões molares de [maleimida]/[furano], nomeadamente 1.0, 0.75 e 0.5, de modo a estudar ambas as situações de não-gelificação e reticulação. Ambos sistemas apresentaram um comportamento regular e boa reciclabilidade quer para gerar situações que possam conduzir à formação de redes a diferentes graus de conversão, ou que possam parar antes da sua obtenção, conforme previsto pela equação de Flory-Stockmayer. Como esperado, a utilização de grupos complementares em quantidades estequiométricas produziu o espessamento mais rápido e a reticulação quase completa; à medida que a quantidade relativa de monómero trifuncional decresceu, as reacções pararam antes da reticulação, ou seja, originaram meios altamente viscosos contendo polímeros solúveis altamente ramificados. As reacções de retro-DA a 110 ºC conduziram à gradual dissolução das partículas de gel (quando presentes), tendo sido comprovado pelos espectros de UV e de RMN de 1H, evidenciado a regeneração dos monómeros. Tal como no sistema do tipo A-A+B-B, a reacção de retro-DA foi seguida adicionando um excesso de DMFu ao sistema reaccional. Como esperado, os produtos finais foram os monómeros furânicos, o DMFu em excesso e o trisaducto ou o bisaducto maleimida-DMFu, o que confirma a eficiência da despolimerização com regeneração dos monómeros iniciais. O último sistema de policondensação por reacção de DA envolveu um monómero assimetricamente substituído do tipo AB2, capaz de originar estruturas macromoleculares hiper-ramificadas que não reticulam. Este estudo preliminar deste sistema foi seguido nas mesmas condições experimentais que os anteriores, apresentando um comportamento com as características esperadas.

Canonical Wnt signalling induces satellite-cell proliferation during adult skeletal muscle regeneration

Satellite cells represent the stem cell population of adult skeletal muscle. The molecular mechanisms that control the proliferation of satellite cells are not well understood. In this study, we show that in response to injury, myofibres activate Wnt ligand transcription and activate a reporter cell line that is sensitive to the canonical Wnt-signalling pathway. Activated satellite cells on isolated cultured myofibres show robust expression of activated-β-catenin (Act-β-Cat), a key downstream transcriptional coactivator of canonical Wnt signalling. We provide evidence that the Wnt family of secreted glycoproteins act on satellite cells in a ligand-specific manner. Overexpression of Wnt1, Wnt3a or Wnt5a protein causes a dramatic increase in satellite-cell proliferation. By contrast, exposure of satellite cells to Wnt4 or Wnt6 diminishes this process. Moreover, we show that the prolonged satellite-cell quiescence induced by inhibitory Wnt is reversible and exposing inhibited satellite cells to stimulatory Wnt signalling restores their proliferation rate. Stimulatory Wnt proteins induce premature satellite cell BrdU incorporation as well as nuclear translocation of Act-β-Cat. Finally, we provide evidence that the Act-β-Cat translocation observed in single fibres during in vitro culture also occurs in cases of acute and chronic skeletal muscle regeneration in rodents and humans. We propose that Wnt proteins may be key factors that regulate the rate of satellite-cell proliferation on adult muscle fibres during the wound-healing response.

A papain-induced disc degeneration model for the assessment of thermo-reversible hydrogel-cells therapeutic approach

Nucleus pulposus (NP) regeneration by the application of injectable cell-embedded hydrogels is an appealing approach for tissue engineering. We investigated a thermo-reversible hydrogel (TR-HG), based on a modified polysaccharide with a thermo-reversible polyamide [poly(N-isopropylacrylamide), pNIPAM], which is made to behave as a liquid at room temperature and hardens at > 32 °C. In order to test the hydrogel, a papain-induced bovine caudal disc degeneration model (PDDM), creating a cavity in the NP, was employed. Human mesenchymal stem cells (hMSCs) or autologous bovine NP cells (bNPCs) were seeded in TR-HG; hMSCs were additionally preconditioned with rhGDF-5 for 7 days. Then, TR-HG was reversed to a fluid and the cell suspension injected into the PDDM and kept under static loading for 7 days. Experimental design was: (D1) fresh disc control + PBS injection; (D2) PDDM + PBS injection; (D3) PDDM + TR-HG (material control); (D4) PDDM + TR-HG + bNPCs; (D5) PDDM + TR-HG + hMSCs. Magnetic resonance imaging performed before and after loading, on days 9 and 16, allowed imaging of the hydrogel-filled PDDM and assessment of disc height and volume changes. In gel-injected discs the NP region showed a major drop in volume and disc height during culture under static load. The RT–PCR results of injected hMSCs showed significant upregulation of ACAN, COL2A1, VCAN and SOX9 during culture in the disc cavity, whereas the gene expression profile of NP cells remained unchanged. The cell viability of injected cells (NPCs or hMSCs) was maintained at over 86% in 3D culture and dropped to ~72% after organ culture. Our results underline the need for load-bearing hydrogels that are also cyto-compatible.

CD4 T cells are required for both development and maintenance of disease in a new mouse model of reversible colitis

Current therapies to treat inflammatory bowel diseases have limited efficacy, significant side effects, and often wane over time. Little is known about the cellular and molecular mechanisms operative in the process of mucosal healing from colitis. To study such events, we developed a new model of reversible colitis in which adoptive transfer of CD4(+)CD45RB(hi) T cells into Helicobacter typhlonius-colonized lymphopenic mice resulted in a rapid onset of colonic inflammation that was reversible through depletion of colitogenic T cells. Remission was associated with an improved clinical and histopathological score, reduced immune cell infiltration to the intestinal mucosa, altered intestinal gene expression profiles, regeneration of the colonic mucus layer, and the restoration of epithelial barrier integrity. Notably, colitogenic T cells were not only critical for induction of colitis but also for maintenance of disease. Depletion of colitogenic T cells resulted in a rapid drop in tumor necrosis factor α (TNFα) levels associated with reduced infiltration of inflammatory immune cells to sites of inflammation. Although neutralization of TNFα prevented the onset of colitis, anti-TNFα treatment of mice with established disease failed to resolve colonic inflammation. Collectively, this new model of reversible colitis provides an important research tool to study the dynamics of mucosal healing in chronic intestinal remitting-relapsing disorders.Mucosal Immunology advance online publication 16 September 2015; doi:10.1038/mi.2015.93.

Somatic embryogenesis, organogenesis and plant regeneration in taro (Colocasia esculenta var. esculenta)

Callus was initiated in three different ‘‘esculenta’’ taro cultivars by culturing corm slices in the dark on half-strength MS medium supplemented with 2.0 mg/l 2,4- dichlorophenoxyacetic acid (2,4-D) for 20 days followed by subculture of all corm slices to half-strength MS medium containing 1.0 mg/l thidiazuron (TDZ). Depending on the cultivar, 20–30% of corm slices produced compact, yellow, nodular callus on media containing TDZ. Histological studies revealed the presence of typical embryogenic cells which were small, isodiametric with dense cytoplasms. Somatic embryos formed when callus was transferred to hormone-free medium and *72% of the embryos germinated into plantlets on this medium. Simultaneous formation of roots and shoots during germination, and the presence of shoot and root poles revealed by histology, confirmed that these structures were true somatic embryos. Plants derived from somatic embryos appeared phenotypically normal following 2 months growth in a glasshouse. This method is a significant advance on those previously reported for the esculenta cultivars of taro due to its efficiency and reproducibility.

Initiation of embryogenic cell suspensions of taro (Colocasia esculenta var. esculenta) and plant regeneration

Embryogenic callus was initiated by culturing in vitro taro corm slices on agar-solidified half-strength MS medium containing 2.0 mg/L 2,4-dichlorophenoxyacetic acid (2,4-D) for 20 days followed by transfer to 1.0 mg/L thidiazuron (TDZ). Callus was subsequently proliferated on solid medium containing 1.0 mg/L TDZ, 0.5 mg/L 2,4- D and 800 mg/L glutamine before transfer to liquid medium containing the same components but with reduced glutamine (100 mg/L). After 3 months in liquid culture on an orbital shaker, cytoplasmically dense cell aggregates began to form. Somatic embryogenesis was induced by plating suspension cells onto solid media containing reduced levels of hormones (0.1 mg/L TDZ, 0.05 mg/L 2,4-D), high concentrations of sucrose (40–50 g/L) and biotin (1.0 mg/L). Embryo maturation and germination was then induced on media containing 0.05 mg/L benzyladenine (BA) and 0.1 mg/L indole-3-acetic acid (IAA). Histological studies of the developing embryos revealed the presence of typical shoot and root poles suggesting that these structures were true somatic embryos. The rate of somatic embryos formation was 500–3,000 per mL settledcell volume while approximately 60% of the embryos regenerated into plants.

Application of autologous periosteal cells for the regeneration of class III furcation defects in Beagle dogs

The aim of this study was to evaluate the healing of class III furcation defects following transplantation of autogenous periosteal cells combined with b-tricalcium phosphate (b-TCP). Periosteal cells obtained from Beagle dogs’ periosteum explant cultures, were inoculated onto the surface of b-TCP. Class III furcation defects were created in the mandibular premolars. Three experimental groups were used to test the defects’ healing: group A, b-TCP seeded with periosteal cells were transplanted into the defects; group B, b-TCP alone was used for defect filling; and group C, the defect was without filling materials. Twelve weeks post surgery, the tissue samples were collected for histology, immunohistology and X-ray examination. It was found that both the length of newly formed periodontal ligament and the area of newly formed alveolar bone in group A, were significantly increased compared with both group B and C. Furthermore, both the proportion of newly formed periodontal ligament and newly formed alveolar bone in group A were much higher than those of group B and C. The quantity of cementum and its percentage in the defects (group A) were also significantly higher than those of group C. These results indicate that autogenous periosteal cells combined with b-TCP application can improve periodontal tissue regeneration in class III furcation defects.

Clonal characterization of bone marrow derived stem cells and their application for bone regeneration

Tissue engineering allows the design of functionally active cells within supportive bio-scaffolds to promote the development of new tissues such as cartilage and bone for the restoration of pathologically altered tissues. However, all bone tissue engineering applications are limited by a shortage of stem cells. The adult bone marrow stroma contains a subset of nonhematopoietic cells referred to as bone marrow mesenchymal stem cells (BMSCs). BMSCs are of interest because they are easily isolated from a small aspirate of bone marrow and readily generate single- cell-derived colonies. These cells have the capacity to undergo extensive replication in an undifferentiated state ex vivo. In addition, BMSCs have the potential to develop either in vitro or in vivo into distinct mesenchymal tissues, including bone, cartilage, fat, tendon, muscle, and marrow stroma. Thus, BMSCs are an attractive cell source for tissue engineering approaches. However, BMSCs are not homo- geneous and the quantity of stem cells decreases in the bone marrow in aged population. A sequential loss of lineage differentiation potential has been found in the mixed culture of bone marrow stromal cells due to a heterogenous popu- lation. Therefore, a number of studies have proposed that homogenous bone marrow stem cells can be generated from clonal culture of bone marrow cells and that BMSC clones have the greatest potential for the application of bone regeneration in vivo

Repair and regeneration of osteochondral defects in the articular joints

People suffering from pain due to osteoarthritic or rheumatoidal changes in the joints are still waiting for a better treatment. Although some studies have achieved success in repairing small cartilage defects, there is no widely accepted method for complete repair of osteochondral defects. Also joint replacements have not yet succeeded in replacing of natural cartilage without complications. Therefore, there is room for a new medical approach, which outperforms currently used methods. The aim of this study is to show potential of using a tissue engineering approach for regeneration of osteochondral defects. The critical review of currently used methods for treatment of osteochondral defects is also provided. In this study, two kinds of hybrid scaffolds developed in Hutmacher's group have been analysed. The first biphasic scaffold consists of fibrin and PCL. The fibrin serves as a cartilage phase while the porous PCL scaffold acts as the subchondral phase. The second system comprises of PCL and PCL-TCP. The scaffolds were fabricated via fused deposition modeling which is a rapid prototyping system. Bone marrow-derived mesenchymal cells were isolated from New Zealand White rabbits, cultured in vitro and seeded into the scaffolds. Bone regenerations of the subchondral phases were quantified via micro CT analysis and the results demonstrated the potential of the porous PCL and PCL-TCP scaffolds in promoting bone healing. Fibrin was found to be lacking in this aspect as it degrades rapidly. On the other hand, the porous PCL scaffold degrades slowly hence it provides an effective mechanical support. This study shows that in the field of cartilage repair or replacement, tissue engineering may have big impact in the future. In vivo bone and cartilage engineering via combining a novel composite, biphasic scaffold technology with a MSC has been shown a high potential in the knee defect regeneration in the animal models. However, the clinical application of tissue engineering requires the future research work due to several problems, such as scaffold design, cellular delivery and implantation strategies.

A participant’s response : recreating the circle with We Al-Li: a program for sharing and regeneration

Personal reflections on the We Al-Li Program

Limitations and challenges in MSC delivery for bone regeneration

Objective: Regeneration of osseous defects by tissue-engineering or cell delivery approach provides a novel means of treatment utilizing cell biology, materials sciences, and molecular biology. The concept of in vitro explanted mesenchymal stem cells (MSCs) with an ability to induce new bone formation has been demonstrated in some small animal models. However, contradictory results have been reported regarding the regenerative capacity of MSCs after ex vivo expansion due to the lack of the understanding of microenvironment for MSC differentiation in vivo. ----- ----- Methods: In our laboratory tissue-derived and bone marrow-derived MSCs have been investigated in their osteogenesis. Cell morphology and proliferation were studied by microscopy, confocal microscopy, FACS and cell counting. Cell differentiation and matrix formation were analysed by matrix staining, quantitative PCR, and immunohistochemistry. A SCID skull defect model was used for cell transplantation studies.----- ----- Results: It was noted that tissue-derived and bone marrow-derived MSCs showed similar characteristics in cell surface marker expression, mesenchymal lineage differentiation potential, and cell population doubling. MSCs from both sources could initiate new bone formation in bone defects after delivery into a critical size defects. The bone forming cells were from both transplanted cells and endogenous cells from the host. Interestingly, the majority of in vitro osteogenic differentiated cells did not form new bone directly even though mineralized matrix was synthesized in vitro by MSCs. Furthermore, no new bone formation was detected when MSCs were transplanted subcutaneously.----- ----- Conclusion: This study unveiled the limitations of MSC delivery in bone regeneration and proposed that in vivo microenvironment needs to be optimized for MSC delivery in osteogenesis.