Project based learning activities as a means of adapting conventional curricula to the demands of the 21st century aeronautical engineer: The design and building of the EYEFLY 1.

In this paper we report the process of designing and building the EYEFLY 1, a real UAS platform which has just performed its maiden flight. For the development of this aircraft, 30 groups of students from successive years at the Escuela Universitaria de Ingeniería Técnica Aeronáutica (EUITA) of the Universidad Politécnica de Madrid (UPM) carried out their compulsory End of Degree Project as a coordinated Project Based learning activity. Our conclusions clearly indicate that Project Based Learning activities can provide a valid complement to more conventional, theoretically-based, teaching methods. The combination of both approaches will allow us to maintain traditional but well-tested methods for providing our students with a sound knowledge of fundamental engineering disciplines and, at the same time, to introduce our students to exciting and relevant engineering situations and sceneries where social and business skills, such as communication skills, team-working or decision-taking, can be put into practice.

Supporting the design and development of Project Based Learning courses.

The use of Project Based Learning has spread widely over the last decades, not only throughout countries but also among disciplines. One of the most significant characteristics of this methodology is the use of ill-structured problems as central activity during the course, which represents an important difficulty for both teachers and students. This work presents a model, supported by a tool, focused on helping teachers and students in Project Based Learning, overcoming these difficulties. Firstly, teachers are guided in designing the project following the main principles of this methodology. Once the project has been specified at the desired level of depth, the same tool helps students to finish the project specification and organize the implementation. Collaborative work among different users is allowed in both phases. This tool has been satisfactorily tested designing two real projects used in Computer Engineering and Software Engineering degrees.

Conceptualizing the interplay of knowledge accumulation and integration capabilities in service innovation-based competitive strategy : a project-oriented firm context

While past knowledge-based approaches to service innovation have emphasized the role of integration of knowledge in the provisioning of solutions, these approaches fail to address complexities involved with knowledge integration in project-oriented context, specifically, how the firm’s capability to acquire new knowledge from clients and past project episodes influence the development of new service solutions. Adopting a dynamic capability framework and building on knowledge-based approaches to innovation, this paper presents a conceptual model that captures the interplay of learning capabilities and the knowledge integration capability in the service innovation-based competitive strategy. Implications to theory and directions for future research are discussed.

Examining the critical interplay of knowledge acquisition and integration capabilities in service innovation-based competitive advantage in project oriented service firms

While past knowledge-based approaches to service innovation have emphasized the role of knowledge integration in the delivery of customer-focused solutions, these approaches do not adequately address the complexities inherent in knowledge acquisition and integration in project-oriented firms. Adopting a dynamic capability framework and building on knowledge-based approaches to innovation, the current study examines how the interplay of learning capabilities and knowledge integration capability impacts service innovation and sustained competitive advantage. This two-stage multi-sample study finds that entrepreneurial project-oriented service firms in their quest for competitive advantage through greater innovation invest in knowledge acquisition and integration capabilities. Implications for theory and practice are discussed and directions for future research provided.

Enhancing Physics Education in the National Defence University : A design based research approach in the production of learning material

This research is connected with an education development project for the four-year-long officer education program at the National Defence University. In this curriculum physics was studied in two alternative course plans namely scientific and general. Observations connected to the later one e.g. student feedback and learning outcome gave indications that action was needed to support the course. The reform work was focused on the production of aligned course related instructional material. The learning material project produced a customized textbook set for the students of the general basic physics course. The research adapts phases that are typical in Design Based Research (DBR). The research analyses the feature requirements for physics textbook aimed at a specific sector and frames supporting instructional material development, and summarizes the experiences gained in the learning material project when the selected frames have been applied. The quality of instructional material is an essential part of qualified teaching. The goal of instructional material customization is to increase the product's customer centric nature and to enhance its function as a support media for the learning process. Textbooks are still one of the core elements in physics teaching. The idea of a textbook will remain but the form and appearance may change according to the prevailing technology. The work deals with substance connected frames (demands of a physics textbook according to the PER-viewpoint, quality thinking in educational material development), frames of university pedagogy and instructional material production processes. A wide knowledge and understanding of different frames are useful in development work, if they are to be utilized to aid inspiration without limiting new reasoning and new kinds of models. Applying customization even in the frame utilization supports creative and situation aware design and diminishes the gap between theory and practice. Generally, physics teachers produce their own supplementary instructional material. Even though customization thinking is not unknown the threshold to produce an entire textbook might be high. Even though the observations here are from the general physics course at the NDU, the research gives tools also for development in other discipline related educational contexts. This research is an example of an instructional material development work together the questions it uncovers, and presents thoughts when textbook customization is rewarding. At the same time, the research aims to further creative customization thinking in instruction and development. Key words: Physics textbook, PER (Physics Education Research), Instructional quality, Customization, Creativity

Socio-Historical Factors Mediating Collaborative Teaching and Learning: A Design-Based Investigation and Intervention

Thesis (Ph.D.)--University of Washington, 2016-06

Evaluating and developing project-based learning:an empirical approach to evaluating CDIO

As a global profession, engineering is integral to the maintenance and further development of society. Indeed, contemporary social problems requiring engineering solutions are not only a consequence of natural and ‘manmade’ disasters (such as the Japanese earthquake or the oil leakage in the Gulf of Mexico) but also encapsulate 21st Century dilemmas around sustainability, poverty and pollution [2,6,7]. Given the complexity of such problems and the constant need for innovation, the demand for engineering education to provide a ready supply of suitably qualified engineering graduates, able to make innovative decisions has never been higher [3,5]. Bearing this in mind, and taking account problems of attrition in engineering education [1,6,4] innovation in the way in which the curriculum is developed and delivered is crucial. CDIO [Conceive, Design, Implement, Operate] provides a potentially ground-breaking solution to such dilemmas. Aimed at equipping students with practical engineering skills supported by the necessary theoretical background, CDIO could potentially change the way engineering is perceived and experienced within higher education. Aston University introduced CDIO into its Mechanical Engineering and Design programmes in October 2011. From its induction, engineering education researchers have ‘shadowed’ the staff responsible for developing and teaching the programme. Utilising an Action Research Design, and adopting a mixed methodological research design, the researchers have worked closely with the teaching team to critically reflect on the processes involved in introducing CDIO into the curriculum. Concurrently, research has been conducted to capture students’ perspectives of CDIO. In evaluating the introduction of CDIO at Aston, the researchers have developed a distinctive research strategy with which to evaluate CDIO. It is the emergent findings from this research that form the basis of this paper. Although early-on in its development CDIO is making a significant difference to engineering education at the University. The paper draws attention to pedagogical, practical and professional issues – discussing each one in turn and in doing so critically analysing the value of CDIO from academic, student and industrial perspectives. The paper concludes by noting that whilst CDIO represents a forwardthinking approach to engineering education, the need for constant innovation in learning and teaching should not be forgotten. Indeed, engineering education needs to put itself at the forefront of pedagogic practice. Providing all-rounded engineers, ready to take on the challenges of the 21st Century!

Practice based learning approaches in collaborative design and engineering education:a case study investigation into the benefits of a crossdisciplinary practice based learning strategy

This study explores the ongoing pedagogical development of a number of undergraduate design and engineering programmes in the United Kingdom. Observations and data have been collected over several cohorts to bring a valuable perspective to the approaches piloted across two similar university departments while trialling a number of innovative learning strategies. In addition to the concurrent institutional studies the work explores curriculum design that applies the principles of Co-Design, multidisciplinary and trans disciplinary learning, with both engineering and product design students working alongside each other through a practical problem solving learning approach known as the CDIO learning initiative (Conceive, Design Implement and Operate) [1]. The study builds on previous work presented at the 2010 EPDE conference: The Effect of Personality on the Design Team: Lessons from Industry for Design Education [2]. The subsequent work presented in this paper applies the findings to mixed design and engineering team based learning, building on the insight gained through a number of industrial process case studies carried out in current design practice. Developments in delivery also aligning the CDIO principles of learning through doing into a practice based, collaborative learning experience and include elements of the TRIZ creative problem solving technique [3]. The paper will outline case studies involving a number of mixed engineering and design student projects that highlight the CDIO principles, combined with an external industrial design brief. It will compare and contrast the learning experience with that of a KTP derived student project, to examine an industry based model for student projects. In addition key areas of best practice will be presented, and student work from each mode will be discussed at the conference.

Levels of awareness of professional ethics used as a sensitizing method in project-based learning

There is a need for educational frameworks for computer ethics education. This discussion paper presents an approach to developing students’ moral sensitivity, an awareness of morally relevant issues, in project-based learning (PjBL). The proposed approach is based on a study of IT professionals’ levels of awareness of ethics. These levels are labelled My world, The corporate world, A shared world, The client’s world and The wider world. We give recommendations for how instructors may stimulate students’ thinking with the levels and how the levels may be taken into account in managing a project course and in an IS department. Limitations of the recommendations are assessed and issues for discussion are raised.

Animateur : participatory studio-based learning in computer graphics animation

The impact of digital technology within the creative industries has brought with it a range of new opportunities for collaborative, cross-disciplinary and multi-disciplinary practice. Along with these opportunities has come the need to re-evaluate how we as educators approach teaching within this new digital culture. Within the field of animation, there has been a radical shift in the expectations of students, industry and educators as animation has become central to a range of new moving image practices. This paper interrogates the effectiveness of adopting a studio-based collaborative production project as a method for educating students within this new moving-image culture. The project was undertaken, as part of the Creative Industries Transitions to New Professional Environments program at Queensland University of Technology (QUT) in Brisbane Australia. A number of students studying across the Creative Industries Faculty and the Faculty of Science and Technology were invited to participate in the development of a 3D animated short film. The project offered students the opportunity to become actively involved in all stages of the creative process, allowing them to experience informal learning through collaborative professional practice. It is proposed that theoretical principles often associated with andragogy and constructivism can be used to design and deliver programs that address the emerging issues surrounding the teaching of this new moving image culture.

Towards a model of dynamic capabilities in innovation-based competitive strategy : insights from project-oriented service firms

With the growing significance of services in most developed economies, there is an increased interest in the role of service innovation in service firm competitive strategy. Despite growing literature on service innovation, it remains fragmented reflecting the need for a model that captures key antecedents driving the service innovation-based competitive advantage process. Building on extant literature and using thirteen in-depth interviews with CEOs of project-oriented service firms, this paper presents a model of innovation-based competitive advantage. The emergent model suggests that entrepreneurial service firms pursuing innovation carefully select and use dynamic capabilities that enable them to achieve greater innovation and sustained competitive advantage. Our findings indicate that firms purposefully use create, extend and modify processes to build and nurture key dynamic capabilities. The paper presents a set of theoretical propositions to guide future research. Implications for theory and practice are discussed. Finally, directions for future research are outlined.

Learning by design workshop

The Learning by Design Workshop Program 2010, a part of the Queensland Government Unlimited: Designing for the Asia Pacific Event Program, was a one-day professional development design thinking workshop run on October 9, 2011 at The Edge, State Library of Queensland for self-selected public and private secondary school teachers from the subject areas of Visual Art, Graphics and Industrial Technology and Design. Participants were drawn from a database of Brisbane and regional Queensland schools from the goDesign and Living City Workshop Programs. It aimed to generate leadership within schools for design-led education and creative thinking and give teachers a rare opportunity to work with professional designers to generate future strategies for design-based learning. Teachers were introduced to the concept of design thinking in education by international keynote speakers CJ Lim (Studio 8 Architects) and Jeb Brugmann (The Next Practice), national speaker Oliver Freeman (NevilleFreeman Agency) and three Queensland speakers, Alexander Loterztain, David Williams and Keith Holledge. Inspired by the Unlimited showcase exhibition Make Change: Design Thinking in Action and ‘Idea Starters’/teaching resources provided, teachers worked with a professional designer (from a discipline of architecture, interior design, industrial design, urban design, graphic design or landscape architecture) in ten random teams, to generate optimistic ideas for the Ideal City of tomorrow, each considering a theme – Food, Water, Transport, Ageing, Growth, Employment, Shelter, Health, Education and Energy. They then discussed how this process could be best activated and expanded on to build interest and knowledge in design thinking in the classroom. Assisted by illustrators, the teams prepared a visual presentation of their ideas and process from art materials provided. The workshop culminated in a video-taped interactive design charette to the larger group, which is intended to be utilised as a toolkit and praxis for teachers as part of the State Library of Queensland Design Minds Website Project.

Developing agency in the creative career : a design-based framework for work integrated learning

Research shows that approximately half of creative practitioners operate as embedded creatives by securing gainful employment within organisations located in the field beyond their core discipline. This foregrounds the significance of having the skills necessary to successfully cross the disciplinary boundaries in order to negotiate a professional role. The multiple implications of such reframing for emerging creative practitioners who navigate uncertain professional boundaries include developing a skill of identifying and successfully targeting the shifting professional and industry coordinates while remaining responsive to changes. A further implication involves creative practitioners engaging in a continuous cycle of re-negotiation of their professional identity making the management of multiple professional selves - along with creating and recreating a meaningful frame of references such as the language around their emerging practice - a necessary skill. This chapter presents a case study of a set of Work Integrated Learning subjects designed to develop in creative industries practitioners the skills to manage their emerging professional identities in response to the shifts in the professional world.

Motores térmicos de vapor, gas y de combustión interna a través de PBL (Project Based Learning)

Nivel educativo: Grado. Duración (en horas): De 31 a 40 horas

The eLIDA CAMEL nomadic model of collaborative partnership for a community of practice in design for learning

A nomadic collaborative partnership model for a community of practice (CoP) in Design for Learning (D4L) can facilitate successful innovation and continuing appraisals of effective professional practice, stimulated by a 'critical friend' assigned to the project. This paper reports on e-learning case studies collected by the JISC-funded UK eLIDA CAMEL Design for Learning Project. The project implemented and evaluated learning design (LD) tools in higher and further education within the JISC Design for Learning pedagogic programme (2006-07). Project partners trialled professional user evaluations of innovative e-learning tools with learning design function, collecting D4L case studies and LD sequences in post-16/HE contexts using LAMS and Moodle. The project brought together learning activity sequences within a collaborative e-learning community of practice based on the CAMEL (Collaborative Approaches to the Management of e-Learning) model, contributing to international D4L developments. This paper provides an overview of project outputs in e-learning innovations, including evaluations from teachers and students. The paper explores intentionality in the development of a CoP in design for learning, reporting on trials of LD and social software that bridged tensions between formalised intra-institutional e-learning relationships and inter-institutional professional project team dynamic D4L practitioner interactions. Following a brief report of D4L case studies and feedback, the catalytic role of the 'critical friend' is highlighted and recommended as a key ingredient in the successful development of a nomadic model of communities of practice for managing professional e-learning projects. eLIDA CAMEL Partners included the Association of Learning Technology (ALT), JISC infoNet, three universities and five FE/Sixth Form Colleges. Results reported to JISC demonstrated D4L e-learning innovations by practitioners, illuminated by the role of the 'critical friend'. The project also benefited from formal case study evaluations and the leading work of ALT and JISC infoNet in the development of the CAMEL model.