SocialPosition : Social Position Indicators Construction Toolbox

This R package provides to sociologists (and related scientists) a toolbox to facilitate the construction of social position indicators from survey data. Social position indicators refer to what is commonly known as social class and social status. There exists in the sociological literature many theoretical conceptualisation and empirical operationalization of social class and social status. This first version of the package offers tools to construct the International Socio-Economic Index of Occupational Status (ISEI) and the Oesch social class schema. It also provides tools to convert several occupational classifications (PCS82, PCS03, and ISCO08) into a common one (ISCO88) to facilitate data harmonisation work, and tools to collapse (i.e. group) modalities of social position indicators.

Nya möjligheter för stratifieringsforskning i Sverige : Internationella yrkesklassificeringar och stratifieringsmått över tid

New opportunities for social stratification research in Sweden: International occupational classifications and stratification measures over time The Swedish occupational classifications have in recent years been changed to a version of the international standard ISCO-88(COM), i.e. SSYK 96. As a consequence, a wide variety of internationally well-known stratification measures can be applied to Swedish data sets. In this article some tests of the validity of translation keys between the older national classifications and SSYK 96 are presented. The keys seem to work satisfactorily. Thus, it is possible to create long time-series with ISCO/SSYK and use these well-known stratification measures over time. Hence, the international interest in Swedish data sets, and empirical results based on these data sets, could rise. Moreover, in the article an empirical regularity, which is quite astonishing, is paid attention to; stratification measures based on different theoretical rationales indicate very similar hierarchies of occupations.

Cytogenetic assessment of occupational exposure to antineoplastic agents

This study has evaluated the utility of measuring effects of low level occupational exposure of nursing personnel to antineoplastic agents. The effect measured in this study is chromosomal damage in peripheral lymphocytes (chromosomal breakage and micronuclei frequency).^ Using nursing personnel in three exposure classifications (low, moderate and high) and breast cancer patients before and after treatment with antineoplastic agents, a weak but statistically significant association was found between exposure and chromosomal damage. Of special interest was the finding that consistent glove usage was negatively associated with increased chromosomal damage.^ The study also demonstrated a statistically significant association between the two measures of chromosomal damage: chromosomal breakage and micronuclei frequency. This suggests that the micronucleus method is a useful test for studying cytogenetic effects in lymphocytes. ^

Manual of Navy enlisted classifications.

Some issues have title: Manual of enlisted Navy job classifications.

Epidemiology of leisure, transportation, occupational, and household physical activity: prevalence and associated factors

Background: To estimate the prevalence of and identify factors associated with physical activity in leisure, transportation, occupational, and household settings. Methods: This was a cross-sectional study aimed at investigating living and health conditions among the population of São Paulo, Brazil. Data on 1318 adults aged 18 to 65 years were used. To assess physical activity, the long version of the International Physical Activity Questionnaire was applied. Multivariate analysis was conducted using a hierarchical model. Results: The greatest prevalence of insufficient activity related to transportation (91.7%), followed by leisure (77.5%), occupational (68.9%), and household settings (56.7%). The variables associated with insufficient levels of physical activity in leisure were female sex, older age, low education level, nonwhite skin color, smoking, and self-reported poor health; in occupational settings were female sex, white skin color, high education level, self-reported poor health, nonsmoking, and obesity; in transportation settings were female sex; and in household settings, with male sex, separated, or widowed status and high education level. Conclusion: Physical activity in transportation and leisure settings should be encouraged. This study will serve as a reference point in monitoring different types of physical activities and implementing public physical activity policies in developing countries

Epidemiology of Leisure, Transportation, Occupational, and Household Physical Activity: Prevalence and Associated Factors

Background: To estimate the prevalence of and identify factors associated with physical activity in leisure, transportation, occupational, and household settings. Methods: This was a cross-sectional study aimed at investigating living and health conditions among the population of So Paulo, Brazil. Data on 1318 adults aged 18 to 65 years were used. To assess physical activity, the long version of the International Physical Activity Questionnaire was applied. Multivariate analysis was conducted using a hierarchical model. Results: The greatest prevalence of insufficient activity related to transportation (91.7%), followed by leisure (77.5%), occupational (68.9%), and household settings (56.7%). The variables associated with insufficient levels of physical activity in leisure were female sex, older age, low education level, nonwhite skin color, smoking, and self-reported poor health; in occupational settings were female sex, white skin color, high education level, self-reported poor health, nonsmoking, and obesity; in transportation settings were female sex; and in household settings, with male sex, separated, or widowed status and high education level. Conclusion: Physical activity in transportation and leisure settings should be encouraged. This study will serve as a reference point in monitoring different types of physical activities and implementing public physical activity policies in developing countries.

COMPLETE ISOMORPHIC CLASSIFICATIONS OF SOME SPACES OF COMPACT OPERATORS

This paper is a continuation and a complement of our previous work on isomorphic classification of some spaces of compact operators. We improve the main result concerning extensions of the classical isomorphic classification of the Banach spaces of continuous functions on ordinals. As an application, fixing an ordinal a and denoting by X(xi), omega(alpha) <= xi < omega(alpha+1), the Banach space of all X-valued continuous functions defined in the interval of ordinals [0,xi] and equipped with the supremum, we provide complete isomorphic classifications of some Banach spaces K(X(xi),Y(eta)) of compact operators from X(xi) to Y(eta), eta >= omega. It is relatively consistent with ZFC (Zermelo-Fraenkel set theory with the axiom of choice) that these results include the following cases: 1.X* contains no copy of c(0) and has the Mazur property, and Y = c(0)(J) for every set J. 2. X = c(0)(I) and Y = l(q)(J) for any infinite sets I and J and 1 <= q < infinity. 3. X = l(p)(I) and Y = l(q)(J) for any infinite sets I and J and 1 <= q < p < infinity.

ON ISOMORPHIC CLASSIFICATIONS OF SPACES OF COMPACT OPERATORS

We prove an extension of the classical isomorphic classification of Banach spaces of continuous functions on ordinals. As a consequence, we give complete isomorphic classifications of some Banach spaces K(X,Y(n)), eta >= omega, of compact operators from X to Y(eta), the space of all continuous Y-valued functions defined in the interval of ordinals [1, eta] and equipped with the supremum norm. In particular, under the Continuum Hypothesis, we extend a recent result of C. Samuel by classifying, up to isomorphism, the spaces K(X(xi), c(0)(Gamma)(eta)), where omega <= xi < omega(1,) eta >= omega, Gamma is a countable set, X contains no complemented copy of l(1), X* has the Mazur property and the density character of X** is less than or equal to N(1).

Evaluation of biologic occupational risk control practices: Quality indicators development and validation

Background: There is growing demand for the adoption of qualification systems for health care practices. This study is aimed at describing the development and validation of indicators for evaluation of biologic occupational risk control programs. Methods: The study involved 3 stages: (1) setting up a research team, (2) development of indicators, and (3) validation of the indicators by a team of specialists recruited to validate each attribute of the developed indicators. The content validation method was used for the validation, and a psychometric scale was developed for the specialists` assessment. A consensus technique was used, and every attribute that obtained a Content Validity Index of at least 0.75 was approved. Results: Eight indicators were developed for the evaluation of the biologic occupational risk prevention program, with emphasis on accidents caused by sharp instruments and occupational tuberculosis prevention. The indicators included evaluation of the structure, process, and results at the prevention and biologic risk control levels. The majority of indicators achieved a favorable consensus regarding all validated attributes. Conclusion: The developed indicators were considered validated, and the method used for construction and validation proved to be effective.

Identification and control of occupational risks in a Sao Paulo metropolitan region quarry

Crushed stone mining is the third largest mining economy in Brazil, where almost half is produced in the Sao Paulo metropolitan region. The segment registers the highest number of accidents among the extractive industries, which justifies the concern with workers` health and safety, and the importance of controlling occupational hazards. Since 2002, the NR-22 Standard (NR-22: Occupational Health and Safety in Mining) makes compulsory the elaboration of a Risk Management Program that identifies risks and establishes control measures. Considering the crushed stone mining industry importance to the state, this paper evaluates and discusses the risks identified in unit operations during the production process of crushed stone in an open pit mine in order to propose control measures for the development of the Risk Management Program. Although this study refers to a specific quarry, it can be applied to other mines from the same sector since some considerations are made regarding differences in manufacturing processes. The research was based on the identification of the main risks associated with drilling, blasting, load & haulage, crushing and screening through field measurements of some hazardous agents, together with company reports. The results contributed to the choice of the appropriate control measures for the improvement Of workers` health and safety conditions.

Diagnostic errors and repetitive sequential classifications in on-line process control by attributes

The procedure of on-line process control by attributes, known as Taguchi`s on-line process control, consists of inspecting the mth item (a single item) at every m produced items and deciding, at each inspection, whether the fraction of conforming items was reduced or not. If the inspected item is nonconforming, the production is stopped for adjustment. As the inspection system can be subject to diagnosis errors, one develops a probabilistic model that classifies repeatedly the examined item until a conforming or b non-conforming classification is observed. The first event that occurs (a conforming classifications or b non-conforming classifications) determines the final classification of the examined item. Proprieties of an ergodic Markov chain were used to get the expression of average cost of the system of control, which can be optimized by three parameters: the sampling interval of the inspections (m); the number of repeated conforming classifications (a); and the number of repeated non-conforming classifications (b). The optimum design is compared with two alternative approaches: the first one consists of a simple preventive policy. The production system is adjusted at every n produced items (no inspection is performed). The second classifies the examined item repeatedly r (fixed) times and considers it conforming if most classification results are conforming. Results indicate that the current proposal performs better than the procedure that fixes the number of repeated classifications and classifies the examined item as conforming if most classifications were conforming. On the other hand, the preventive policy can be averagely the most economical alternative rather than those ones that require inspection depending on the degree of errors and costs. A numerical example illustrates the proposed procedure. (C) 2009 Elsevier B. V. All rights reserved.

Speciation of arsenic metabolites in the urine of occupational workers and experimental rats using an optimised hydride cold-trapping method

A hydride cold-trapping technique was developed and optimised for the measurement of urinary arsenic metabolites. The analytical precision of the method was found to be 6.1, 4.0 and 4.8% (n = 5) for inorganic arsenic (As-i), monomethylarsonate (MMA) and dimethylarsinate (DMA), respectively, with recoveries close to 100%, The detection limits were 1.0, 1.3 and 3 ng for As-i, MMA and DMA, respectively. The method was then used to analyse urine samples obtained from three groups of workers for occupational exposure in three companies where copper chrome arsenate was used for timber treatment. The results were compared with those for a normal control group of laboratory workers. Arsenic and its metabolites were also measured in experimental rats given 5 mg As kg(-1) body mass by oral gavage in the form of sodium arsenite, calcium arsenite or sodium arsenate. Occupational workers showed a significantly higher excretion of As-i, Up to two fold increases of urinary As-i excretion in rats compared with control rats were also observed in animals dosed with various forms of arsenicals. The method is suitable for the measurement of arsenic metabolites in urine of both humans and experimental animals.

Incorporating cognitive-behavioral therapy with occupational therapy: A comparative study with patients with low back pain

This paper reports on the implementation of a psychoeducational program utilizing cognitive-behavioral principles. The efficacy of this psychoeducational treatment program in modifying dysfunctional attitudes in patients with chronic low back pain was examined using a two-group pretest posttest design with a follow-lip at 3 months Thirty patients (average age = 44.37 SD = 13.71) participated in the study, with 15 in the psychoeducational treatment group and 15 in the placebo control group. These two conditions were added on to an existing eclectic inpatient pain management program. After assessment on the IPAM (The Integrated Psychosocial Assessment Model), scores were reduced to multivariate composite scores on the factors of illness behavior depressed and negative cognitions, and acute pain strategies. Results of a group x time repeated measures analysis of variance for the three pain factors revealed a significant main effect for group (F(23,1) = 5.00 p < .04), tempered by a significant interaction between group and rime on the 'depressed and negative' pain factor (F(23,1) = 4.77 p < .04). Patients in the treatment group improved significantly over time and significantly more than the placebo control group patients at posttreatment. Results provide support for the program in increasing patients' feelings of control over their pain and the use of positive coping strategies, while reducing perceived helplessness, depression, disability, and pain intensity.

A multi-sectorial committee in directing HIV/AIDS-specific interventions in the occupational setting: An example from South Africa

We present a descriptive analysis of a mechanism to coordinate and implement human immunodeficiency virus (HIV) prevention and care in the occupational setting. The mechanism we describe is a multidisciplinary committee composed of stakeholders in the occupational health environment including unions, management, medical researchers, and medical personnel. The site chosen for the analysis was a South African sugar mill in rural KwaZulu-Natal. The factory is situated in an area of high HIV seroprevalence and has a workforce of 400 employees. The committee was initiated to coordinate a combined prevention-care initiative. The issues that were important in the formation of the committee included confidentiality, trust, and the traditional roles of the stakeholder relationships. When these points were addressed through the focus on a common goal, the committee was able to function in its role as a coordinating body. Central to this success was the inclusion of all stakeholders in the process, including those with traditionally opposing, interests and legitimacy conferred by the stakeholders. This committee was functionally effective and demonstrated the benefit of a freestanding committee dedicated to addressing HIV/acquired immune deficiency syndrome (AIDS) issues. We describe the implementation and feasibility of a multisectoral committee in directing HIV/AIDS initiatives in the occupational setting in rural South Africa.