Simultaneous multichannel carrier-suppressed return-to-zero to non-return-to-zero format conversion using a fiber Bragg grating

A novel multichannel carrier-suppressed return-to-zero (CSRZ) to non-return-to-zero (NRZ) format conversion scheme based on a single custom-designed fiber Bragg grating (FBG) with comb spectra is proposed. The spectral response of each channel is designed according to the algebraic difference between the CSRZ and NRZ spectra outlines. The tailored group delays are introduced to minimize the maximum refractive index modulation. Numerical results show that four-channel 200-GHz-spaced CSRZ signals at 40 Gbits/s can be converted into NRZ signals with high Q-factor and wide-range robustness. It is shown that our proposed FBG is robust to deviations of bandwidth and central wavelength detuning. Another important merit of this scheme is that the pattern effects are efficiently reduced owing to the well-designed spectra response.

Quantitative trait loci detection and benefits from marker-assisted selection in dairy cattle

Knowing the chromosomal areas or actual genes affecting the traits under selection would add more information to be used in the selection decisions which would potentially lead to higher genetic response. The first objective of this study was to map quantitative trait loci (QTL) affecting economically important traits in the Finnish Ayrshire population. The second objective was to investigate the effects of using QTL information in marker-assisted selection (MAS) on the genetic response and the linkage disequilibrium between the different parts of the genome. Whole genome scans were carried out on a grand-daughter design with 12 half-sib families and a total of 493 sons. Twelve different traits were studied: milk yield, protein yield, protein content, fat yield, fat content, somatic cell score (SCS), mastitis treatments, other veterinary treatments, days open, fertility treatments, non-return rate, and calf mortality. The average spacing of the typed markers was 20 cM with 2 to 14 markers per chromosome. Associations between markers and traits were analyzed with multiple marker regression. Significance was determined by permutation and genome-wise P-values obtained by Bonferroni correction. The benefits from MAS were investigated by simulation: a conventional progeny testing scheme was compared to a scheme where QTL information was used within families to select among full-sibs in the male path. Two QTL on different chromosomes were modelled. The effects of different starting frequencies of the favourable alleles and different size of the QTL effects were evaluated. A large number of QTL, 48 in total, were detected at 5% or higher chromosome-wise significance. QTL for milk production were found on 8 chromosomes, for SCS on 6, for mastitis treatments on 1, for other veterinary treatments on 5, for days open on 7, for fertility treatments on 7, for calf mortality on 6, and for non-return rate on 2 chromosomes. In the simulation study the total genetic response was faster with MAS than with conventional selection and the advantage of MAS persisted over the studied generations. The rate of response and the difference between the selection schemes reflected clearly the changes in allele frequencies of the favourable QTL. The disequilibrium between the polygenes and QTL was always negative and it was larger with larger QTL size. The disequilibrium between the two QTL was larger with QTL of large effect and it was somewhat larger with MAS for scenarios with starting frequencies below 0.5 for QTL of moderate size and below 0.3 for large QTL. In conclusion, several QTL affecting economically important traits of dairy cattle were detected. Further studies are needed to verify these QTL, check their presence in the present breeding population, look for pleiotropy and fine map the most interesting QTL regions. The results of the simulation studies show that using MAS together with embryo transfer to pre-select young bulls within families is a useful approach to increase the genetic merit of the AI-bulls compared to conventional selection.

Coarse optical orthogonal frequency division multiplexing for optical datacommunication applications

We propose a new low-cost solution using orthogonal transmission of non-return-to-zero and carrierless-amplitude-and-phase format data to realize a coarse OFDM transmission system. Using low bandwidth electronics and optoelectronic components, the system is demonstrated at 37.5Gb/s. © 2011 OSA.

Performance and power dissipation comparisons between 28 Gb/s NRZ, PAM, CAP and optical OFDM systems for data communication applications

Theoretical investigations have been carried out to analyze and compare the link power budget and power dissipation of non-return-to-zero (NRZ), pulse amplitude modulation-4 (PAM-4), carrierless amplitude and phase modulation-16 (CAP-16) and 16-quadrature amplitude modulation-orthogonal frequency division multiplexing (16-QAM-OFDM) systems for data center interconnect scenarios. It is shown that for multimode fiber (MMF) links, NRZ modulation schemes with electronic equalization offer the best link power budget margins with the least power dissipation for short transmission distances up to 200 m; while OOFDM is the only scheme which can support a distance of 300 m albeit with power dissipation as high as 4 times that of NRZ. For short single mode fiber (SMF) links, all the modulation schemes offer similar link power budget margins for fiber lengths up to 15 km, but NRZ and PAM-4 are preferable due to their system simplicity and low power consumption. For lengths of up to 30 km, CAP-16 and OOFDM are required although the schemes consume 2 and 4 times as much power respectively compared to that of NRZ. OOFDM alone allows link operation up to 35 km distances. © 1983-2012 IEEE.

Proposal for a novel and simple WDM NRZ-DPSK system

A novel and simple non-return-to-zero differential phase shift keying (NRZ-DPSK) wavelength division multiplexing (WDM) system, which can simultaneously demultiplex and demodulate multiple wavelengths, is proposed and investigated in this paper. The phase-to-intensity demodulation principle is based on detuned filtering, which is achieved by using a single commercial array waveguide grating (AWG) in our scheme. By properly choosing appropriate AWG channels at the transmitter, the AWG at the receiver can act as both the demultiplexer and the demodulator of the DPSK signals. Simulations at 10, 20, and 40 Gbit/s show good flexibility and performance for the proposed system. © 2009 Higher Education Press and Springer-Verlag GmbH.

Mode division multiplexing exploring hollow-core photonic bandgap fibers

We review our recent exploratory investigations on mode division multiplexing using hollow-core photonic bandgap fibers (HC-PBGFs). Compared with traditional multimode fibers, HC-PBGFs have several attractive features such as ultra-low nonlinearities, low-loss transmission window around 2 μm etc. After having discussed the potential and challenges of using HC-PBGFs as transmission fibers for mode multiplexing applications, we will report a number of recent proof-of-concept results obtained in our group using direct detection receivers. The first one is the transmission of two 10.7 Gbit/s non-return to zero (NRZ) data signals over a 30 m 7-cell HC-PBGF using the offset mode launching method. In another experiment, a short piece of 19-cell HC-PBGF was used to transmit two 20 Gbit/s NRZ channels using a spatial light modulator for precise mode excitation. Bit-error-ratio (BER) performances below the forward-error-correction (FEC) threshold limit (3.3×10-3) are confirmed for both data channels when they propagate simultaneously. © 2013 IEEE.

Coarse optical orthogonal frequency division multiplexing for optical datacommunication applications

We propose a new low-cost solution using orthogonal transmission of non-return-tozero and carrierless-amplitude-and-phase format data to realize a coarse OFDM transmission system. Using low bandwidth electronics and optoelectronic components, the system is demonstrated at 37.5Gb/s. © OSA/ CLEO 2011.

10 Gbit s(-1) electroabsorption-modulated laser light-source module using selective area MOVPE

A distributed-feedback (DFB) laser and a high-speed electroabsorption (EA) modulator are integrated, on the basis of the selective area MOVPE growth (SAG) technique and the ridge waveguide structure, for a 10 Gbit s(-1) optical transmission system. The integrated DFB laser/EA modulator device is packaged in a compact module with a 20% optical coupling efficiency to the single-mode fibre. The typical threshold current is 15 mA, and the side-mode suppression ratio is over 40 dB with the single-mode operation at 1550 nm. The module exhibits 1.2 mW fibre output power at a laser gain current of 70 mA and a modulator bias voltage of 0 V. The 3 dB bandwidth is 12 GHz. A dynamic extinction ratio of over 10 dB has been successfully achieved under 10 Gbit s(-1) non-return to zero (NRZ) operation, and a clearly open eye diagram is obtained.

On-Chip All-Optical Passive 3.55 Gbit/s NRZ-to-PRZ Format Conversion Using a High-Q Silicon-Based Microring Resonator

We report the experimental result of all-optical passive 3.55 Gbit/s non-return-to-zero (NRZ) to pseudo-return-to-zero (PRZ) format conversion using a high-quality-factor (Q-factor) silicon-based microring resonator notch filter on chip. The silicon-based microring resonator has 23800 Q-factor and 22 dB extinction ratio (ER), and the PRZ signals has about 108 ps width and 4.98 dB ER.

40 Gbits/s all-optical clock recovery for degraded signals using an amplified feedback laser

All-optical clock recovery for the return-to-zero modulation format is demonstrated experimentally at 40 Gbits/s by using an amplified feedback laser. A 40 GHz optical clock with a root-mean-square (rms) timing jitter of 130 fs and a carrier-to-noise ratio of 42 dB is obtained. Also, a 40 GHz optical clock with timing jitter of 137 fs is directly recovered from pseudo-non-return-to-zero signals degraded by polarization-mode dispersion (PMD). No preprocessing stage to enhance the clock tone is used. The rms timing jitter of the recovered clock is investigated for different values of input power and for varying amounts of waveform distortion due to PMD.

All-optical processing systems based on semiconductor optical amplifiers

Nesta tese investigam-se e desenvolvem-se dispositivos para processamento integralmente óptico em redes com multiplexagem densa por divisão no comprimento de onda (DWDM). O principal objectivo das redes DWDM é transportar e distribuir um espectro óptico densamente multiplexado com sinais de débito binário ultra elevado, ao longo de centenas ou milhares de quilómetros de fibra óptica. Estes sinais devem ser transportados e encaminhados no domínio óptico de forma transparente, sem conversões óptico-eléctrico-ópticas (OEO), evitando as suas limitações e custos. A tecnologia baseada em amplificadores ópticos de semicondutor (SOA) é promissora graças aos seus efeitos não-lineares ultra-rápidos e eficientes, ao potencial para integração, reduzido consumo de potência e custos. Conversores de comprimento de onda são o elemento óptico básico para aumentar a capacidade da rede e evitar o bloqueio de comprimentos de onda. Neste trabalho, são estudados e analisados experimentalmente métodos para aumentar a largura de banda operacional de conversores de modulação cruzada de ganho (XGM), a fim de permitir a operação do SOA para além das suas limitações físicas. Conversão de um comprimento de onda, e conversão simultânea de múltiplos comprimentos de onda são testadas, usando interferómetros de Mach-Zehnder com SOA. As redes DWDM de alto débito binário requerem formatos de modulação optimizados, com elevada tolerância aos efeitos nefastos da fibra, e reduzida ocupação espectral. Para esse efeito, é vital desenvolver conversores integramente ópticos de formatos de modulação, a fim de permitir a interligação entre as redes já instaladas, que operam com modulação de intensidade, e as redes modernas, que utilizam formatos de modulação avançados. No âmbito deste trabalho é proposto um conversor integralmente óptico de formato entre modulação óptica de banda lateral dupla e modulação óptica de banda lateral residual; este é caracterizado através de simulação e experimentalmente. Adicionalmente, é proposto um conversor para formato de portadora suprimida, através de XGM e modulação cruzada de fase. A interligação entre as redes de transporte com débito binário ultra-elevado e as redes de acesso com débito binário reduzido requer conversão óptica de formato de impulso entre retorno-a-zero (RZ) e não-RZ. São aqui propostas e investigadas duas estruturas distintas: uma baseada em filtragem desalinhada do sinal convertido por XGM; uma segunda utiliza as dinâmicas do laser interno de um SOA com ganho limitado (GC-SOA). Regeneração integralmente óptica é essencial para reduzir os custos das redes. Dois esquemas distintos são utilizados para regeneração: uma estrutura baseada em MZI-SOA, e um método no qual o laser interno de um GC-SOA é modulado com o sinal distorcido a regenerar. A maioria dos esquemas referidos é testada experimentalmente a 40 Gb/s, com potencial para aplicação a débitos binários superiores, demonstrado que os SOA são uma tecnologia basilar para as redes ópticas do futuro.

La migration pour études : l’expérience de retour des diplômés guinéens dans leur pays d’origine après une formation au Canada

Notre recherche a pour objet la migration pour études et plus précisément l’expérience de retour et du non-retour des diplômés guinéens formés au Canada. Elle repose sur une démarche qualitative. Prenant appui sur des matériaux discursifs issus d’entrevues individuelles dans deux sites (en Guinée et au Canada), auprès d’un échantillon de trente et un diplômés, notre étude s’est attachée, dans un premier temps, à faire ressortir les motivations des étudiants à « retourner au pays » à la fin de leurs études au Canada ou, à l’inverse, à demeurer dans le pays d’accueil. Dans une seconde phase, la recherche s'est intéressée au devenir des enquêtés après leurs études et en particulier à l’insertion ou réinsertion sociale, familiale et professionnelle des diplômés retournés en Guinée ou installés au Canada. Enfin, notre étude examine les perspectives d’avenir de l’ensemble de nos répondants; leurs satisfactions et frustrations après le retour en Guinée ou l’installation au Canada, le bilan qu’ils tirent de leur expérience de migration pour études mais aussi les perspectives de retour éventuelles et les liens que ceux qui sont restés entretiennent avec leur pays d’origine. Pour les diplômés retournés en Guinée, l’analyse des données montre que les « perspectives d’emploi et de promotion » ont joué un rôle central dans leur décision de rentrer. Ils sont également nombreux a déclaré avoir choisi le retour pour des raisons familiales. Certains justifient aussi leur retour par « la volonté de servir le pays ». Si l’insertion familiale a été facile pour la plupart des diplômés retournés en Guinée, la réinsertion sociale, le retour à des pratiques sociales et à un environnement précaire « qu’ils avaient oublié » semble en revanche avoir été moins aisé. Sur le plan professionnel, le séjour canadien est perçu comme ayant eu un impact très positif sur leur carrière. Les diplômes canadiens semblent très valorisés en Guinée et les réseaux canadiens que les diplômés ont pu établir lors de leur séjour sont aussi très utiles. La possibilité de trouver un emploi décent au Canada domine également le discours des répondants qui ont choisi de demeurer au pays d’accueil après leur formation. Les répondants ayant choisi de demeurer au Canada évoquent également fréquemment l’idée de « sacrifier » leur retour au profit de « l’avenir » des enfants. La politique de l’immigration canadienne par « l’incitation » de demeurer au Canada après les études ont aussi influencé certains diplômés dans leurs décisions de ne pas retourner. Même s’ils évoquent fréquemment l’emploi pour justifier leur installation au Canada, nos répondants restés au Canada ne trouvent pas facilement un travail qui correspond à leur formation et doivent souvent se contenter de « petits boulots ». Plusieurs pointent du doigt le «bilinguisme» et la «discrimination» en milieu de travail comme obstacles majeurs. Enfin, pour bon nombre d’entre eux le « retour au pays » est une perspective jamais écartée, la plupart n’ont jamais coupé le lien avec leur pays d’origine et plusieurs tiennent à faire connaître la culture guinéenne à leurs enfants.

Impacto del proceso de eliminación del doble conteo del material importado por Carbones del Cerrejón Limited en términos de eficiencia y efectividad en el proceso de nacionalización y liberación del material

La operación de mega minería que abarca CERREJON se desarrolla bajo lo más altos estándares de seguridad y calidad, con el compromiso de entregar al mercado un excelente producto y evitando el deterioro del entorno. Uno de los puntos más fuertes de la compañía se haya en la integración de los procesos productivos entre la mina de carbón, el ferrocarril y el puerto, logrando que la operación sea eficiente y que garantice niveles altos de óptimos resultados y que los porcentajes de falla no existan o cada vez sean menores en el proceso de explotación y transporte del carbón de Colombia hacia el mundo. El departamento de MATERIALES es el punto de origen para garantizar que se desarrolle la operación, dado que el departamento tiene la gran labor de adquirir y entregar los bienes y servicios requeridos por la Compañía al más bajo costo total evaluado, en el menor tiempo posible y bajo el marco de la legislación Colombiana en el proceso de nacionalización, con un alto énfasis en el desarrollo de relaciones fuertes y sinérgicas entre todos los eslabones de la cadena. Todo el proceso del departamento se enmarca dentro de un ciclo que debe encaminarse a ser cada vez más efectivo y eficiente; de allí que se busquen opciones de mejoramiento para afinar los procesos. Para que sea posible y factible manejar una mega operación como esta se requiere afinar al máximo la red que se establece en su cadena de abastecimiento, buscando lograr un flujo de producto, información y fondos que garanticen disponibilidad del producto, para así generar una rentabilidad alta a la compañía, y controlar los costos por la operación. Dado que la cadena de suministro es susceptible a mejoras, gracias a la interacción con los proveedores, colaboradores y clientes; se pretende sacar el mejor provecho de esto, a través del análisis de la cadena actual de CERREJON; presentando una opción de mejora en uno de los eslabones del proceso productivo, esta opción ha sido contemplada desde años anteriores, pero en esta ocasión gracias a la integración de afinamientos en los sistemas de información, y la participación activa de los proveedores, se encuentra una opción viable de la eliminación de un reproceso, que garantiza eficiencia y efectividad en la agilización del ciclo de producción en CERREJON. A través de la ejecución del proyecto de reforma del conteo, se presenta la oportunidad de mejoramiento en la cadena del departamento; el proceso de reconteo en la mina, realizado posteriormente al conteo inicial en Puerto Bolívar, de los materiales que llegan importados vía marítima. El proceso de afinamiento del recibo documental en el consolidador de carga y los mayores proveedores de entrega directa (HITACHI y MCA) al transportador, genera la opción del uso de terminales portátiles, que de la mano con los ajustes documentales, permitirán que la carga sea contada y separada por localización, para enviarla vía tren a LMN, reduciendo tiempo de entrega al cliente final, los costos de remanejo al volver a contar, y los costos asociados a las entregas no oportunas de devolución de contenedores.

A large Cervidae Holocene accumulation in Eastern Brazil: an example of extreme taphonomical control in a cave environment

A remarkable cervid bone accumulation occurs at a single passage (named Cervid Passage; CP) at Lapa Nova, a maze cave in eastern Brazil. CP lies away from cave entrances, is a typical pitfall passage and contains bone remains of at least 121 cervids, besides few bats, peccaries and rodents remains. There is no evidence of water (or sediment) flow at the site and in general bones lack post depositional alterations and display anatomical proximity, suggesting that the majority of the remains found inside CP (mainly cervids) are due to animals that after entering the cave got trapped in the site. Observations suggest that two entrances could have provided access to cervids (and the few other animals, besides bats), either by falling inside the cave or by entering by their own free will. Once inside the cave, the maze pattern would make route finding difficult, and of all passage intersections, only the one leading to CP would result in a non-return situation, starving the animal to death. Radiocarbon dates suggest that animal entrapment occurred during at least 5 thousand years, during the Holocene. The reasons why mainly cervids were found are unknown but they are probably related to the biology of this group coupled with the fact that caves provide several specific taphonomic processes that may account for a strong bias in bone accumulation. Indeed, the frequent occurrence of Cervidae in both the fossil and sub-fossil record in Brazilian caves may be related to an overall high faunal abundance or may suggest that these animals were especially prone to enter caves, perhaps in search of nutrients (as cave saltpetre) or water.