Inverse identification of the bending stiffness of a braided polyethylene twine subject to large deformation: application to the identification of the mesh opening rigidity of fishing nets.

The evaluation of the mesh opening stiffness of fishing nets is an important issue in assessing the selectivity of trawls. It appeared that a larger bending rigidity of twines decreases the mesh opening and could reduce the escapement of fish. Nevertheless, netting structure is complex. A netting is made up of braided twines made of polyethylene or polyamide. These twines are tied with non-symmetrical knots. Thus, these assemblies develop contact-friction interactions. Moreover, the netting can be subject to large deformation. In this study, we investigate the responses of netting samples to different types of solicitations. Samples are loaded and unloaded with creep and relaxation stages, with different boundary conditions. Then, two models have been developed: an analytical model and a finite element model. The last one was used to assess, with an inverse identification algorithm, the bending stiffness of twines. In this paper, experimental results and a model for netting structures made up of braided twines are presented. During dry forming of a composite, for example, the matrix is not present or not active, and relative sliding can occur between constitutive fibres. So an accurate modelling of the mechanical behaviour of fibrous material is necessary. This study offers experimental data which could permit to improve current models of contact-friction interactions [4], to validate models for large deformation analysis of fibrous materials [1] on a new experimental case, then to improve the evaluation of the mesh opening stiffness of a fishing net

Auswirkungen von größeren Steertmaschen bei Grundschleppnetzen auf Plattfischfänge in der Nordsee

The present fishing effort regulation for bottom trawls in the North Sea (EU 40/2008) reduces the fishing effort with larger co-dend mesh sizes (> 100 mm mesh opening) to 86 fishing days per year. The aim of this technical measure is the protection of the weak cod stock usually harvested with this mesh opening. By combining the results of our selectivity investigations on plaice during a commercial fishing trip and the samples taken within the frame of the EU data collection regulation (DCR) we could draw conclusions on commercial and non-commercial fish species. When using codend meshes with larger mesh opening the discard was reduced remarkably. In the reference codend with 80 mm mesh opening the undersized bycatch was 47 % of the total catch of plaice, in the experimental codends with 120 mm mesh opening it was only 7 % and with 130 mm mesh opening just 3 %. On the other hand however, the applied mesh openings in the experimental codends let escape marketable plaice to some extent. The loss of catch was assessed on the basis of fish numbers per length class using a length-weight conversion rate from the DCR. The loss by weight of marketable fish with 120 mm codend mesh opening was 18 %, and 28 % with 130 mm codend mesh opening. To assure the protection of young round and flatfish with one general mesh size, a new regulation should prescribe a minimum mesh opening of 120 mm, accompanied by an expansion of the fishing effort.

Begrenzung des Fischereiaufwandes oder Erhöhung der Mindestmaschenöffnung – Ein Vergleich der Alternativen bei der Dorschfischerei in der Ostsee

The basis for a long-term profitable fishery is a precautionary and environment-compatible use of fish stocks. The fishery management presently models the exploitation through the parameters of fishing mortality and the age at first capture. These two parameters are translated into the technical measures of fishing effort and mesh openings and quotas, which are then used in practice for controlling the fishery. Stock protection can be achieved by reducing the fishing effort, by assigning smaller quotas, by reducing the number of days at sea, or by increasing the mesh opening. The respective protection measures have different effects on the development of the stocks but also on the revenue obtained by the fishery. These alternatives have been examined taking as an example the cod stock in the western Baltic. The optimization goal was the maximization of profit observing at the same time the prerequisites for stock protection according to the precaution approach. For these calculations the same models and data have been used as are beeing used in the stock management of the ACFM of ICES. The response of altered technical measures to the recruitment of cod stock was considered, and a proposal to overcome overfishing of cod in the western Baltic Sea was derived.

Eine zusätzliche Möglichkeit für die Ostseedorsch-Fischerei: Steerte aus 90° gedrehtem Netztuch

In 2004, comparative selectivity investigations were made with the now legal BACOMA codend of 110 mm mesh opening and alternative codends made of netting turned 90° of similar mesh openings on both commercial boats and on research vessels. The results show a certain variability of the BACOMA results – depending on ship type and season (L50 varying between 36,8 and 40,6) – and a general equal efficiency of codends made of netting turned 90° of the same mesh opening. Underwater observations and reduced performance of codends of equal circumference in meshes as the joining round at the end of the tapered part of the trawl indicate the need to reduce the relation of the cir-cumferences of codend and extension to 1 to 0.7 to achieve optimum fit and selectivity.

Gewinnmaximierung der Fischerei schützt den Dorsch der westlichen Ostsee vor Überfischung – Nur ein theoretischer Ansatz ?

Profit maximization in fishery protects cod of western Baltic Sea against overfishing – Only a theoretical approach? The frame for the management of fish stocks politically given contains – apart from ecological and social goals – also an economic goal, which is considered here in particular. From the point of view of fishery enterprises the main management goal for the exploitation of fish stocks is the maximization of profit. There are models for the yield optimization since long time. They are mainly used so far to optimize fishing mortality. Here the Beverton and Holt yield model was used. Apart from the optimization of fishing effort the model was used to optimize age of first capture and thus mesh opening. Starting point of the considerations is a given age group of a fish stock. If this age group is completely fished the yield obtained from this age group is maximized. The investigations show that the term overfishing is not exclusively linked as frequently assumed with a too large fishing mortality, but likewise with a mismatch of the mesh opening. For the calculated example Baltic cod data are used. At present the cod is caught far from reaching its mass optimum. Therefore, the profit of fishery enterprises can in the long term be considerably increased by the optimization of the mesh opening. During the conversion from the state of the art to fishing with optimised mesh sizes, however, a loss of profit has to be expected. The title of the paper sounds provocative. However, the stock of the Baltic Sea cod is better protected by a long-term maximum-profit oriented exploitation than by the precautionary approach applied now.

Ein neues Messgerät zur Kontrolle der Maschenöffnung in der Fischerei

At present both the wedge gauge and the ICES mesh gauge are used to examine the mesh opening of trawl cod-ends. A thorough investigation of both instruments by an EU project (MESH) has revealed a number of deficiencies. This has lead to the conclusions to not further recommend the use of both devices but to go for the development of a complete new measurement tool. This is presently progressing in a further EU project named OMEGA. Prototypes of the new device have been produced and a number of introductory tests have already been made. This contribution reports on further laboratory tests carried out at the Institute for Fishing technology and Fish Quality with special emphasis on netting yarn diameters below 4 mm. The results demonstrate further yarn size depending inaccuracies of the wedge gauge and support the rapid introduction of the newly developed measurement instrument.

Aktuelle Planungen zur Regelung der Beifangproblematik in der Krabbenfischerei

At present the fishery for the brown shrimp (Crangon crangon L.) is one of the most economically rewarding fisheries in Europe. Due to the small size of the target objects this fishery has to be carried out with rather small meshes. As it is, however, performed on the nursing grounds of important fish species it encounters a severe bycatch problem. On this basis, EU Council regulation 850/98 demands the use of either sieve nets or sorting grids from 1 July, and to pass pertaining national bye-laws. Germany discusses to use either sieve nets of 70 mm mesh opening or sorting grids of 20 mm bar distance, and tries to achieve a harmonization of the byelaw with neighbouring countries of The Netherlands and Denmark to ensure equal conditions on the same fishing grounds.

Ist die Steigerung des dauerhaften Fischereiertrages durch Maschengrößenoptimierung möglich?

The management of a fish aimed at maximising the fishing yield of the managed fish stock. There are models for the yield optimisation since long time. They are used so far mainly to optimise the fishing mortality. Starting point of this paper is a number of fish of an age group of a fish stock. This age group is accompanied over its lifetime. A result of the investigations is that the term growth over-fishing is linked not as frequently assumed exclusive with a too large fishing mortality, but likewise with a mismatch of the mesh opening. The investigations show that the fishing yield increases with the fishing effort on condition that fishing is carried out with an optimised mesh opening. For the calculated example Baltic cod data are used. At present the cod is caught far before reaching the yield optimum. Now the fish is substantially too small when it is caught and did not reach its optimal mass at this time. Therefore the sustainable fishing yield could be increased considerably by the optimasation of the mesh opening. During the conversion from the state of the art to fishing with optimised mesh sizes, however, a loss of profit has to be expected. A further advantage of the mesh enlargement is an increase of the spawning stock size accompanying with it, since the fish is caught at a later age. By the use of substantially larger mesh openings the cod has the opportunity to spawn several times and generate descendants and this will also lead to an increased yield in future. In addition better prices could be obtained at the market by catching larger cod.

Ostseedorschselektion - bestehende und vorgesehene neue technische Maßnahmen

Since the beginning of the nineties the situation of the Baltic cod stock is deteriorating constantly. The fishery administration (International Baltic Sea Fisheries Commission) tries to counter this by issuing new technical measures. Existing measures (raise of mesh opening from 105 to 120 mm, “Danish” and “Swedish” escape windows) and newly introduced technical measures (BACOMA codend and raise of the mesh opening in conventional codends to 130 mm) show a number of deficiencies putting their efficiency in doubt. Available well tested alternatives to the newly introduced measures without their negative side effects (codends made of netting turned by 90°, and other designs) are presently left out of regard. Models of socioeconomic effects are likewise ignored.

Neues aus der Selektionsforschung am Ostseedorsch

In account of the decision of the IBSFC (International Baltic Sea Fisheries Commission) to admit alternative codend constructions to the presently legal of diamond meshes with 120 mm mesh opening, since seven years a vivid research activity is encouraged at the fishing technology institutions around the Baltic. Though a center of gravity in this field of research lies in the EUproject BACOMA (participants Finland Sweden, Denmark) also the corresponding national institutes of other Baltic countries (Germany, Poland, Russia) have been active with similar investigations. German experiments in 1999 dealt with the effect of the use of netting made of double instead of single yarn on the selectivity. Further research was done on modifications of codends made from netting turned 90° from its original orientation and on simplified versions of the so-called Multipanel codend which consists of three equal diamond and three square mesh panels. The experiments demonstrated on the one hand a definite deterioration of the selective properties in a codend made from double instead of single yarn. Constructional changes in codends made from netting turned 90° on the other hand brought a further improvement of the selectivity of such codends. Finally, the investigations on the Multipanel codend revealed the overwhelming influence of the square mesh panels on the selectivity success. If in a conventional diamond codend three windows are cut out starting 50 cm from the real end of the codend in such a way that the remaining parts have the same breadth as the square mesh panels to insert, the selective effect of such a codend is remarkably improved. According to further preliminary tests this seems to be nearly independent from the type of material used.

Analyse der Beifangreduktion durch Trichternetze in der kommerziellen Garnelenfischerei

Trials for the determination of the magnitude of bycatch reduction by the sievenets used in the commercial brown shrimp fishery were carried out from September to December 1997. Trawls with 9 m beam length were the subjected to the investigation. They were used on different fishing grounds in the estuary of the Elbe near Cuxhaven. Sievenets with 50, 60 and 80 mm mesh opening were tested in 29 hauls and 31.6 h total duration. A trawl of equal construction without sievenets fished synchronously was used for comparison. The proportional catch composition in the codend was determined by weighing the catch components (fish, discard shrimps and commercial size shrimps) as separated by means of a riddle. The composition of the sorted out part of the catch could be calculated by comparison of the corresponding catch components both in standard trawl and sievenettrawl. According to this the total catch of a beam trawl with sievenet is diminished by 9 to 34 % depending on the mesh opening of the sievenet. 32 to 58 % of the sorted out part of the catch consists of fish. Use of a sievenet, however, also leads to a loss of 6 to 15 % of commercial size shrimps. Per hour of towing this means a loss of 8.7 kg commercial size shrimps with a sievenet of 60 mm mesh opening and of 1.8 kg for a mesh size of 80 mm.

Neue Chance für Scholle und Kabeljau in der Nordsee

Two surveys in the German Bight revealed a relatively good recruitment for plaice and cod. However, with the current high effort and uneconomic way of fishing, most of these fish will end as discards. To protect young plaice during the winter months an increase of the mesh opening in beam trawls within the plaice box is suggested. Therefore, the fishermen are called upon to make a more considerated selection of their nets.

Localização Ótima de Aparelhos de Corte Normalmente Abertos e Normalmente Fechados em Redes de Distribuição

Tipicamente as redes elétricas de distribuição apresentam uma topologia parcialmente malhada e são exploradas radialmente. A topologia radial é obtida através da abertura das malhas nos locais que otimizam o ponto de operação da rede, através da instalação de aparelhos de corte que operam normalmente abertos. Para além de manterem a topologia radial, estes equipamentos possibilitam também a transferência de cargas entre saídas, aquando da ocorrência de defeitos. As saídas radiais são ainda dotadas de aparelhos de corte que operam normalmente fechados, estes têm como objetivo maximizar a fiabilidade e isolar defeitos, minimizando a área afetada pelos mesmos. Assim, na presente dissertação são desenvolvidos dois algoritmos determinísticos para a localização ótima de aparelhos de corte normalmente abertos e fechados, minimizando a potência ativa de perdas e o custo da energia não distribuída. O algoritmo de localização de aparelhos de corte normalmente abertos visa encontrar a topologia radial ótima que minimiza a potência ativa de perdas. O método é desenvolvido em ambiente Matlab – Tomlab, e é formulado como um problema de programação quadrática inteira mista. A topologia radial ótima é garantida através do cálculo de um trânsito de potências ótimo baseado no modelo DC. A função objetivo é dada pelas perdas por efeito de Joule. Por outro lado o problema é restringido pela primeira lei de Kirchhoff, limites de geração das subestações, limites térmicos dos condutores, trânsito de potência unidirecional e pela condição de radialidade. Os aparelhos de corte normalmente fechados são localizados ao longo das saídas radiais obtidas pelo anterior algoritmo, e permite minimizar o custo da energia não distribuída. No limite é possível localizar um aparelho de corte normalmente fechado em todas as linhas de uma rede de distribuição, sendo esta a solução que minimiza a energia não distribuída. No entanto, tendo em conta que a cada aparelho de corte está associado um investimento, é fundamental encontrar um equilíbrio entre a melhoria de fiabilidade e o investimento. Desta forma, o algoritmo desenvolvido avalia os benefícios obtidos com a instalação de aparelhos de corte normalmente fechados, e retorna o número e a localização dos mesmo que minimiza o custo da energia não distribuída. Os métodos apresentados são testados em duas redes de distribuição reais, exploradas com um nível de tensão de 15 kV e 30 kV, respetivamente. A primeira rede é localizada no distrito do Porto e é caraterizada por uma topologia mista e urbana. A segunda rede é localizada no distrito de Bragança e é caracterizada por uma topologia maioritariamente aérea e rural.

Análise do comportamento reológico de pastas de cimento contendo resíduos de pneu para poços de petróleo

The low tenacity presented by the Portland cement pastes used in the oil wells cementation has been motivating several researches with attention focused on alternative materials. Additives have been developed to generate flexible pastes with mechanical resistance capable to support the expansions and retractions of the metallic covering of the wells that submit to the steam injection, technique very used to increase the recovery factor in oil reservoirs with high viscosity. A fresh paste with inadequate rheological behavior may commit the cementation process seriously, involving flaws that affect the performance of the paste substantially in the hardened state. This work proposes the elaboration and the rheological analysis of Portland cement pastes with addition of residues of rubber tire in several proportions, with the aim of minimizing the damages provoked in the hem cementing of these wells. By thermogravimetric analysis, the particles of eraser that go by the sieve of 0,5mm (35 mesh) opening and treated superficially with NaOH solution of 1 mol/L presented appropriate thermal resistance for wells that submit to thermal cyclic. The evaluation of the study based on the results of the rheological analysis of the pastes, complemented by the mechanical analysis, thickening, stability, tenor of free water and filtrate loss, being used as parameter a paste reference, without rubber addition. The results showed satisfactory rheology, passive of few corrections; considerable loss of mechanical resistance (traction and compression), compensated by earnings of tenacity, however with established limits for its application in oil wells; satisfactory stability, free water and thickening time

Composição e abundância dos Copepoda (crustacea) planctônicos da costa do Amapá - Op. Norte IV (REVIZEE/SCORE NO)

A caracterização da composição de Copepoda planctônicos, na costa do Amapá foi estudada, a partir de amostras coletadas através do programa REVIZEE, durante a Operação Norte IV, em 2001, realizada pelo navio Oceanográfico “Antares”, pertencente à Marinha do Brasil (H-40). A área estudada está inserida na ZEE Norte brasileiro no trecho entre o Cabo Orange e o Delta do rio Parnaíba, enquadrando-se nas seguintes coordenadas geográficas, LAT. 02º 25,92’N e LONG. 049º11,98’W (est. 102); LAT. 03º36,14’N e LONG. 048º24,71’W (est. 107); LAT. 05º32,39’N e LONG. 050º13,11’W (est.130); LAT. 04º23,64’N e LONG. 051º02,58’W (est.134). As coletas foram realizadas através de arrastos verticais com rede de zooplâncton, com malha de 200 μm, dotadas de fluxômetro. Após as coletas, as amostras foram fixadas com formol neutro a 4 %. Também foram coletados os fatores hidrológicos, onde a temperatura da água variou de 23, 72 ºC a 28,87 ºC na plataforma continental, enquanto na região oceânica variou de 12,69 ºC a 28,87 ºC. A salinidade, na plataforma continental, variou 24,00 PSU a 36,42 PSU, e na região oceânica a variação foi de 33,98 PSU a 36,62 PSU. A costa do Amapá foi considerado um ambiente estável, devido as poucas variações de salinidade e temperatura. Foram identificadas 84 espécies de Copepoda, das quais, destacaram-se como as mais freqüentes, Clausocalanus furcatus, Oithona setigera, Paracalanus parvus, Macrosetella gracilis, Oncaea media, Corycaeus speciosus, Farranula gracilis, Subeucalanus pileatus e Paracalanus sp. As altas densidades e dominância ocorreram para as espécies, Nannocalanus minor, Corycaeus (Corycaeus) speciosus, Clausocalanus furcalocalanus pavo, Paracalanus parvus, Parvocalanus crassirostris, Oithona setigera, Macrosetella gracilis, Farranula gracilis, Subcalanus pileatus, Euterpina acutifrons e Oncaea media, consideradas como indicadoras de oligotrofia na área estudada. Dentre estas, a espécie Subeucalanus pileatus foi a que mais se destacou, a qual ocorreu na maioria das estações. A diversidade foi considerada alta na maioria das estações, exceto na estação 127 (considerada baixa), por estar sendo influenciada pela pluma amazônica. Enquanto, a densidade apresentou resultados menores que 100 org.m-³ indicando a região oceânica como um ambiente oligotrófico, e apesar disso, a comunidade de Copepoda encontra-se em grande diversidade na área.