Modeling and manufacturability assessment of bistable quantum-dot cells

We have investigated the behavior of bistable cells made up of four quantum dots and occupied by two electrons, in the presence of realistic confinement potentials produced by depletion gates on top of a GaAs/AlGaAs heterostructure. Such a cell represents the basic building block for logic architectures based on the concept of quantum cellular automata (QCA) and of ground state computation, which have been proposed as an alternative to traditional transistor-based logic circuits. We have focused on the robustness of the operation of such cells with respect to asymmetries derived from fabrication tolerances. We have developed a two-dimensional model for the calculation of the electron density in a driven cell in response to the polarization state of a driver cell. Our method is based on the one-shot configuration-interaction technique, adapted from molecular chemistry. From the results of our simulations, we conclude that an implementation of QCA logic based on simple ¿hole arrays¿ is not feasible, because of the extreme sensitivity to fabrication tolerances. As an alternative, we propose cells defined by multiple gates, where geometrical asymmetries can be compensated for by adjusting the bias voltages. Even though not immediately applicable to the implementation of logic gates and not suitable for large scale integration, the proposed cell layout should allow an experimental demonstration of a chain of QCA cells.

Mechanical closing of the paperboard package and the effect of the shape of paperboard package to its manufacturability

The main objective of this thesis was to design a hinge and a closing mechanism for the plastic rim of a paperboard package. Of the hinge and closing mechanisms the 3D-models were designed using SolidWorks program and the functionality of the mechanisms was tested with rapid prototype models. When a mechanism that worked was found, the manufacturability of the mechanisms was tested in an injection molding machine with changeable inserts. Another objective of this thesis was to test the effect of the shape of paperboard package to its manufacturability. The effect of the packages shape was tested with plastic tools made for three different shaped trays. Suggestions for further research were made according to the results of the thesis.

Improving the Manufacturability of Active Microfluidic Devices using Stereolithography (SL)

Thesis (Master's)--University of Washington, 2016-06

Integral Piezoactuator System with Optimum Placement of Functionally Graded Material - A Topology Optimization Paradigm

Piezoactuators consist of compliant mechanisms actuated by two or more piezoceramic devices. During the assembling process, such flexible structures are usually bonded to the piezoceramics. The thin bonding layer(s) between the compliant mechanism and the piezoceramic may induce undesirable behavior, including unusual interfacial nonlinearities. This constitutes a drawback of piezoelectric actuators and, in some applications, such as those associated to vibration control and structural health monitoring (e. g., aircraft industry), their use may become either unfeasible or at least limited. A possible solution to this standing problem can be achieved through the functionally graded material concept and consists of developing `integral piezoactuators`, that is those with no bonding layer(s) and whose performance can be improved by tailoring their structural topology and material gradation. Thus, a topology optimization formulation is developed, which allows simultaneous distribution of void and functionally graded piezoelectric materials (including both piezo and non-piezoelectric materials) in the design domain in order to achieve certain specified actuation movements. Two concurrent design problems are considered, that is the optimum design of the piezoceramic property gradation, and the design of the functionally graded structural topology. Two-dimensional piezoactuator designs are investigated because the applications of interest consist of planar devices. Moreover, material gradation is considered in only one direction in order to account for manufacturability issues. To broaden the range of such devices in the field of smart structures, the design of integral Moonie-type functionally graded piezoactuators is provided according to specified performance requirements.

Via-configurable transistor array: a regular design technique to improve ICs yield

Process variations are a major bottleneck for digital CMOS integrated circuits manufacturability and yield. That iswhy regular techniques with different degrees of regularity are emerging as possible solutions. Our proposal is a new regular layout design technique called Via-Configurable Transistors Array (VCTA) that pushes to the limit circuit layout regularity for devices and interconnects in order to maximize regularity benefits. VCTA is predicted to perform worse than the Standard Cell approach designs for a certain technology node but it will allow the use of a future technology on an earlier time. Ourobjective is to optimize VCTA for it to be comparable to the Standard Cell design in an older technology. Simulations for the first unoptimized version of our VCTA of delay and energy consumption for a Full Adder circuit in the 90 nm technology node are presented and also the extrapolation for Carry-RippleAdders from 4 bits to 64 bits.

Ohutlevytuotteenvalmistusteknisten piirteiden tunnistaminen ja käyttö suunnittelun apuna

Suunnittelu- ja valmistustoiminnot ovat eriytymässä myös ohutlevyteollisuudessa. Kilpailukyvyn parantamiseksi, valmistusta siirretään alihankkijoille maihin, jossa työvoima on halpaa ja suuret markkinat lähellä, tuotekehityksen ja suunnittelun jäädessä Suomeen tai muualle Länsi-Eurooppaan. Tällöin vanhan lokaalin toimintamallin synergiaedut eivät ole enää mahdollisia ja tuotteen valmistettavuuden arviointi, laadunhallinta ja komponenttien yhteensopivuuden varmistaminen on erittäin haasteellista. Tässä tutkimuksessa etsittiin uuden toimintamallin tuomiin haasteisiin vastauksia piirrepohjaisesta mallintamisesta. Tavoitteen mukaisesti, tutkimuksessa tunnistettiin ohutlevytuotteen valmistusteknilliset piirteet ja luotiin niiden mukainen piirrekaavio. Piirteiden tunnistus vaati tutkimustyötä sekä nykyaikaisten suunnittelumetodien että valmistusmenetelmien ja ohutlevymateriaalien parissa. Lisäksitarkasteltiin, millaisia vaikutuksia piirteillä on tuotteen valmistettavuuteen ja miten nämä tulee huomioida tuotteen suunnittelussa.

DFM(A)-Aspects of an Advanced Cable Gland Design

Nowadays typical motor junction boxes do not incorporate cable glands, which would provide good electrical performance interms of electromagnetic compatibility. In this paper, a manufacturability and assembly analysis for the new construction of a rigid body feeder cable junction of an electric motor is presented especially for converter drives (practical tests were carried out at LUT during 2007). Although the cable junction should also clamp the cable to provide enough tensile strength, the phase conductors should not get squashed by the groundingconnection. In order to ensure good performance in an electrical mean especially in converter drives, the grounding of the cable should be connected 360 degrees around the cable. In this paper, following manufacturing technologies are discussed: traditional turning, precision and centrifugal casting, and rotation moulding. DFM(A)-aspects are presented in detail.

Tuning the design procedures for laser processed microwave mechanics

This research has been focused at the development of a tuned systematic design methodology, which gives the best performance in a computer aided environment and utilises a cross-technological approach, specially tested with and for laser processed microwave mechanics. A tuned design process scheme is also presented. Because of the currently large production volumes of microwave and radio frequency mechanics even slight improvements of design methodologies or manufacturing technologies would give reasonable possibilities for cost reduction. The typical number of required iteration cycles could be reduced to one fifth of normal. The research area dealing with the methodologies is divided firstly into a function-oriented, a performance-oriented or a manufacturability-oriented product design. Alternatively various approaches can be developed for a customer-oriented, a quality-oriented, a cost-oriented or an organisation-oriented design. However, the real need for improvements is between these two extremes. This means that the effective methodology for the designers should not be too limited (like in the performance-oriented design) or too general (like in the organisation-oriented design), but it should, include the context of the design environment. This is the area where the current research is focused. To test the developed tuned design methodology for laser processing (TDMLP) and the tuned optimising algorithm for laser processing (TOLP), seven different industrial product applications for microwave mechanics have been designed, CAD-modelled and manufactured by using laser in small production series. To verify that the performance of these products meets the required level and to ensure the objectiveness ofthe results extensive laboratory tests were used for all designed prototypes. As an example a Ku-band horn antenna can be laser processed from steel in 2 minutes at the same time obtaining a comparable electrical performance of classical aluminium units or the residual resistance of a laser joint in steel could be limited to 72 milliohmia.

Tuotekehitysprosessin organisaatiolähtöinen kehittäminen

Työn tavoitteena oli kohdeyrityksen tuotekehitysprosessin tehostaminen. Tuotekehitysprosessin tulee huomioida sekä kaikki työvaiheet ideasta tuotantoon että kaikki tuotteen tehokkaaseen lanseeraukseen vaikuttavat toiminnot. Tuotekehitysprosessin pitää tukea rinnakkaissuunnittelua, jossa tuotteen ominaisuuksia, valmistettavuutta ja markkinointia kehitetään samanaikaisesti. Työssä käytetyt teoriat perustuvat alan kirjallisuudessa ja lehtiartikkeleissa esitettyihin malleihin tuotekehitysprosessista ja rinnakkaissuunnittelusta. Kuitenkin työ on tehty nimenomaan kohdeyrityksen tarpeisiin huomioimalla kehityksessä kaikkien prosessiin osallistuvien toimintojen näkemys tarvittavista tehtävistä. Työn tuloksena kehitettiin elektronisessa muodossa yrityksen sisäisessä tietoverkossa oleva kuvaus tuotekehitysprosessin rinnakkaisesta etenemisestä ja päätöksenteosta sekä siihen liitetty vaiheittainen toimintaohjeisto kaikille kehitystyöhön osallistuville organisaatiotahoille. Uusi tuoteprosessi luo edellytykset yhtenäiseen ja tehokkaaseen uusien tuotteiden markkinoille saattamiseen. Elektroninen rakenne helpottaa prosessin käytettävyyttä ja jatkuvaa kehittämistä. Prosessin tulee kehittyä jokaisen tuotekehitysprojektin yhteydessä.

DFM(A)- aspects for a fixed electrical attenuator design

The goal of this paper is to describe a complete and extensive prototype design of a fixed electrical attenuator. The paper starts by describing the function and by giving some basic information about the attenuators. After a comprehensive description of the component, the facts of reverse engineering are discussed. The method itself is applied to ease manufacturing and design stages of this component. Information about materials and applied manufacturing technologies are also included in this report. By applying some specified DFMA-aspects the final design turned out to be a potential prototype device to be manufactured and for further analyse.

DFM(A)- aspects for a microwave waveguide ring resonator design

In this research manufacturability analysis is made for an E-plane waveguide ring resonator. About the electrical characteristics of the waveguide ring resonator is discussed. Possibilities to utilize concurrent engineering method both for designing and making manufacturability analysis for MW- and RF-components are discussed. For helping to establish the necessary guidelines for easy manufacturing and assembly of the waveguide ring resonator a specialised DFM(A)-questionnaire is generated. The questionnaire gives also new information for collaborative designing approach in MW-/RF- engineering. The advantages and disadvantages of the concurrent engineering design method are evaluated in the research.

DFM(A)- aspects for a horn antenna design

In this paper aspects of design for manufacturability and assembly (DFMA) are applied to the design of coaxially fed standard gain horn antenna for 1.70 - 2.60 GHz. Possibilities to utilize cross-technological approach method is examined. Methods of DFMA for laser processing are covered and practical design guides and methods are developed. Antenna construction for easy manufacturing and specialized performance is shown. Required dimensions and tolerances are discussed and suitable materials for laser processing are selected.

DFM(A)- aspects for an sma connector design

In this research, manufacturability analysis is made for an SMA connector. Analysis and aspects of applying virtual prototyping for an SMA connector design and manufacturing are also investigated. Special questionnaires for the component and machining are made in order to enable necessary information to ensure DFM(A) –aspects of products. The aspects of easy manufacturing for machining the SMA connector are collected. Material selection is discussed, and manufacturing stages of prototype manufacturing are presented. The main focus of this research is on prototype manufacturing, but also aspects considering volume production are discussed. A special purpose SMA connector is designed for printed circuit board edge mounting.

DFM/DFMA(A) – analysis and aspects of applying systematic engineering for a microwave testfixture design

In this paper, manufacturability analysis and collection of design aspects is made for a microwave test-fixture. Aspects of applying systematic design for a microwave test-fixture design and manufacturing are also analysed. Special questionnaires for the component and machining are made in order to enable necessary information to ensure DFM(A) – aspects of the component. The aspects of easy manufacturing for machining the microwave test-fixture are collected. Material selection is discussed and manufacturing stages of prototype manufacturing are presented.

Hitsaustuotannon kehittäminen ja valmistusystävällinen suunnittelu

Työssä tarkastellaan hitsauksen tuotekehityksen suunnittelun toteuttamista ja hitsauksen kehittämistä konepajalla. Yritykset tietävät omat valmistustekniset ongelmansa, mutta kehittämisen aloittaminen on monesti hankalaa tai sitä ei edes aloiteta. Pienimmillä yrityksillä ei usein ole mahdollisuuksia eikä osaamista uusien tuotantomenetelmien ja tuotteiden kehittämiseen. Työssä annetaan neuvoja miten alentaa kehittämistyön aloituskynnystä ja auttaa suunnittelutehtävän jäsentelyssä. Tuotteen suunnittelu on vaativa tehtävä, koska siinä lyödään lukkoon tuotteen toimivuus ja suurin osa kustannuksista. Suunnittelijoiden on tiedettävä eri valmistusmenetelmistä ja valmistusystävällisestä suunnittelusta, jotta he voisivat huomioida valmistettavuus- ja kokoonpanonäkökohdat. Hyvässä hitsatussa tuotteessa on mahdollisimman vähän hitsiä, käytetty modulointia ja standardointia sekä käytetty hitsausta korvaavia menetelmiä. Työssä on esitelty valmistusystävälliseen suunnitteluun kehitelty "Design For Welding" -malli, jossa käydään läpi hitsatun rakenteen erityispiirteet suunnittelun kannalta. Valmistusystävällisen suunnittelun tarkoituksena on vähentää tilauskohtaista suunnittelua, hitsausta, hitsauksen jälkeistä käsittelyä ja koneistusta.