adaptive location update mechanism for network-constrained moving objects in changeful traffic conditions

Natl Chiao Tung Univ, Dept Comp Sci

基于交通路网的移动对象数据库系统的研究和设计

给出了在PostgreSQL基础上的基于交通路网的移动对象数据库系统的设计方案,系统地介绍了其体系架构、扩展的数据类型和操作以及代理中间层的功能设计.该系统为进一步研究移动对象更新算法以及移动对象数据索引提供了基础.

Integrated Management of Interface Power (IMIP) Framework

La présence importante de plusieurs réseaux sans-fils de différentes portées a encouragée le développement d’une nouvelle génération d’équipements portables sans-fils avec plusieurs interfaces radio. Ainsi, les utilisateurs peuvent bénéficier d’une large possibilité de connectivité aux réseaux sans-fils (e.g. Wi-Fi [1], WiMAX [2], 3G [3]) disponibles autour. Cependant, la batterie d’un nœud mobile à plusieurs interfaces sera rapidement épuisée et le temps d’utilisation de l’équipement sera réduit aussi. Pour prolonger l’utilisation du mobile les standards, des réseaux sans-fils, on définie (individuellement) plusieurs états (émission, réception, sleep, idle, etc.); quand une interface radio n’est pas en mode émission/réception il est en mode sleep/idle où la consommation est très faible, comparée aux modes émission/réception. Pourtant, en cas d’équipement portable à multi-interfaces radio, l’énergie totale consommée par les interfaces en mode idle est très importante. Autrement, un équipement portable équipé de plusieurs interfaces radio augmente sa capacité de connectivité mais réduit sa longévité d’utilisation. Pour surpasser cet inconvénient on propose une plate-forme, qu'on appelle IMIP (Integrated Management of Interface Power), basée sur l’extension du standard MIH (Media Independent Handover) IEEE 802.21 [4]. IMIP permet une meilleure gestion d’énergie des interfaces radio, d’un équipement mobile à multi-radio, lorsque celles-ci entrent en mode idle. Les expérimentations que nous avons exécutées montrent que l’utilisation de IMIP permet d'économiser jusqu'a 80% de l'énergie consommée en comparaison avec les standards existants. En effet, IMIP permet de prolonger la durée d'utilisation d'équipements à plusieurs interfaces grâce à sa gestion efficace de l'énergie.

Research update: LANDMark study: Longitudinal assessment of neuropathy in diabetes using novel ophthalmic MARKers

The eye is a simple, non-invasive location for screening, diagnosing and follow up of diabetic peripheral neuropathy.

Elimination of cross-talk in diffuse optical tomographic reconstructions through a weighted update procedure: results of simulation study - art. no. 61640S

Reconstructions in optical tomography involve obtaining the images of absorption and reduced scattering coefficients. The integrated intensity data has greater sensitivity to absorption coefficient variations than scattering coefficient. However, the sensitivity of intensity data to scattering coefficient is not zero. We considered an object with two inhomogeneities (one in absorption and the other in scattering coefficient). The standard iterative reconstruction techniques produced results, which were plagued by cross talk, i.e., the absorption coefficient reconstruction has a false positive corresponding to the location of scattering inhomogeneity, and vice-versa. We present a method to remove cross talk in the reconstruction, by generating a weight matrix and weighting the update vector during the iteration. The weight matrix is created by the following method: we first perform a simple backprojection of the difference between the experimental and corresponding homogeneous intensity data. The built up image has greater weightage towards absorption inhomogeneity than the scattering inhomogeneity and its appropriate inverse is weighted towards the scattering inhomogeneity. These two weight matrices are used as multiplication factors in the update vectors, normalized backprojected image of difference intensity for absorption inhomogeneity and the inverse of the above for the scattering inhomogeneity, during the image reconstruction procedure. We demonstrate through numerical simulations, that cross-talk is fully eliminated through this modified reconstruction procedure.

Contact dermatitis from shoes: an update

Contact dermatitis is a common inflammatory skin condition characterized by erythematous and pruritic skin lesions that occur after contact with a foreign substance. There are two forms of contact dermatitis: irritant and allergic. Irritant contact dermatitis is caused by the non–immune-modulated irritation of the skin by a substance, leading to skin changes. Allergic contact dermatitis is a delayed hypersensitivity reaction in which a foreign substance comes into contact with the skin; skin changes occur after reexposure to the substance. A medical condition referred to as “shoe dermatitis” is a form of contact dermatitis caused by the contact of the foot with parts of the shoe due to these materials. Shoe dermatitis is a diagnostic and therapeutic challenge and is a common type of contact dermatitis. It is imperative the foot and ankle physician become familiar with recognizing signs and symptoms of shoe dermatitis so that their patients can be accurately diagnosis and appropriately treated to avoid secondary infections and disability. This review will first present causative factors for the etiology of shoe contact dermatitis supported by clinical-based evidence as found in the medical literature. Secondly, a description of the signs and symptoms of shoe contact dermatitis will be presented in a narrative fashion. Finally, both treatment options and preventative measures to avoid shoe.

Supplemental Pre-Location Report, U.S. 18, Mason City Bypass I-35 to Rudd : Cerro Gordo and Floyd Counties, 1992

The purpose of this report is to compile and update the prior studies in order to select viable alternatives for inclusion in the Environmental Assessment to be prepared for this project.

Stairway Uniformity Measurement: What Lateral Location Should Be Measured?

BACKGROUND: This project addressed an unresolved issue involving measurement methods for determining step uniformity. Leading experts on stairway safety agree that lack of step uniformity within a flight contributes to risk of missteps. A relatively new method for precisely measuring step dimensions is the nosing-to-nosing method. An issue in applying the method is lack of agreement on the lateral location to make the measurements. That location depends on where stairway users ascend and descend relative to the width of the steps. A prior investigator examined people descending to determine the lateral distance between the handrail center and the mid-line of the person’s body. He found the median was 44 cm. AIM: The two objectives of the experiment were to: (1) determine if a different set of stairway users will have the same median lateral distance from the handrail as those described in the prior observational study, and (2) determine if the lateral distance of participants is affected by their direction of travel and use of a handrail. METHODS: The investigators established visible distance markers on one stairway in a campus building and videotaped volunteer students ascending and descending the flight of stairs. Each of the 16 participant ascended with and without using the handrail, and each descended with and without using the handrail. Images were printed and analyzed to determine their lateral distance between the inner edge of the handrail and a point midway between the participant’s knees. Results were analyzed statistically to test hypotheses corresponding to the two objectives. RESULTS: The previous study found a median lateral distance of 44 cm when measured from the center of the handrail. Using comparable data, the median found in this study was 25 cm. Results of this study indicated that lateral distance from the handrail is significantly affected by the direction of travel and by use of the handrail. The greatest lateral distance was for ascending with the handrail. The shortest lateral distance was for descending without the handrail. VALUE: Committees develop and periodically revise standards for stairways leading to fire exits and workplace facilities. The practical value of this project is providing empirical evidence that standard developing committees may consider when convening to update their requirements and guidelines on how to measure step uniformity.

Enhancing the trust of location acquisition systems for critical applications and location-based security services

This paper identifies a number of critical infrastructure applications that are reliant on location services from cooperative location technologies such as GPS and GSM. We show that these location technologies can be represented in a general location model, such that the model components can be used for vulnerability analysis. We perform a vulnerability analysis on these components of GSM and GPS location systems as well as a number of augmentations to these systems.

New particle formation and growth at a remote, sub-tropical coastal location

A month-long intensive measurement campaign was conducted in March/April 2007 at Agnes Water, a remote coastal site just south of the Great Barrier Reef on the east coast of Australia. Particle and ion size distributions were continuously measured during the campaign. Coastal nucleation events were observed in clean, marine air masses coming from the south-east on 65% of the days. The events usually began at ~10:00 local time and lasted for 1-4 hrs. They were characterised by the appearance of a nucleation mode with a peak diameter of ~10 nm. The freshly nucleated particles grew within 1-4 hrs up to sizes of 20-50 nm. The events occurred when solar intensity was high (~1000 W m-2) and RH was low (~60%). Interestingly, the events were not related to tide height. The volatile and hygroscopic properties of freshly nucleated particles (17-22.5 nm), simultaneously measured with a volatility-hygroscopicity-tandem differential mobility analyser (VH-TDMA), were used to infer chemical composition. The majority of the volume of these particles was attributed to internally mixed sulphate and organic components. After ruling out coagulation as a source of significant particle growth, we conclude that the condensation of sulphate and/or organic vapours was most likely responsible for driving particle growth during the nucleation events. We cannot make any direct conclusions regarding the chemical species that participated in the initial particle nucleation. However, we suggest that nucleation may have resulted from the photo-oxidation products of unknown sulphur or organic vapours emitted from the waters of Hervey Bay, or from the formation of DMS-derived sulphate clusters over the open ocean that were activated to observable particles by condensable vapours emitted from the nutrient rich waters around Fraser Island or Hervey Bay. Furthermore, a unique and particularly strong nucleation event was observed during northerly wind. The event began early one morning (08:00) and lasted almost the entire day resulting in the production of a large number of ~80 nm particles (average modal concentration during the event was 3200 cm-3). The Great Barrier Reef was the most likely source of precursor vapours responsible for this event.