Fluxo de empregos, fluxo de trabalhadores e fluxo de postos de trabalho no Brasil

Job flows, workers flows and employment flows in Brazil. The labor market is in constant flux. When measuring labor market mobility, it is usual to estimate labor market flow statistics, such as worker reallocation and job reallocation. The goal of this paper is to present previously unknown within plant job reallocation statistics for Brazil. The within plant job reallocation is measured as changes in the occupational mix of the plant. The within plant job reallocation allows a decomposition of worker turnover decomposition into matching, technological change and labor demand factors. Using formal labor market data for Brazil, from 1996 to 2001, our results suggest that technological change accounted for a limited share of worker turnover. More than a quarter of worker turnover can be attributed to labor demand shifts and more than 50% of worker turnover is due to matching.

Análisis del ciclo económico en una economía con rigideces nominales y un amplio sector informal

En este trabajo se construye un modelo de Equilibrio General Dinámico Estocástico (DSGE) con sector informal y rigideces en precios, usando como marco de análisis la teoría de búsqueda y emparejamiento del mercado de trabajo. El objetivo principal es analizar el efecto de los diferentes tipos de choques económicos sobre las principales variables del mercado laboral, en una economía con presencia importante del sector informal. Igualmente se estudia el efecto de la política monetaria, ya que la presencia de este sector afecta la dinámica del ciclo económico, y por ende los mecanismos de transmisión de la política monetaria. En particular, se analiza la dinámica del modelo bajo diferentes reglas de política monetaria y se compara el bienestar agente representativo generado por cada una de estas reglas.

Criação e destruição de emprego na indústria gaúcha nos anos 90 : fatos estilizados e os efeitos do câmbio e da abertura comercial

O objetivo deste trabalho é calcular, pela primeira vez na literatura, os fluxos de emprego (job flows) na indústria gaúcha nos anos 90 e sua relação com o processo de abertura comercial no período. O trabalho propõe o estudo do emprego na indústria através do comportamento das variações do emprego nas empresas individualmente, para identificar a heterogeneidade de comportamento dentro dos setores, ao invés do uso de médias agregadas, que implicitamente supõe um comportamento homogêneo das empresas. Denominamos fluxos de emprego as taxas de criação e destruição do emprego, estimadas em 5,15% e 6,42% ao ano, em média, respectivamente. Destas obtemos a taxa líquida de crescimento do emprego e a taxa de realocação bruta do emprego, estimadas em –1,27 e 11,57%, respectivamente. Em todos os anos da década houve criação e destruição de emprego simultaneamente, sugerindo uma grande heterogeneidade na dinâmica do emprego nas empresas. A perda média de 1 emprego em 100 por ano no período é resultado da abertura de 5 postos e destruição de 6 postos. Além dos fluxos, este trabalho estima e analisa o impacto do câmbio e da abertura comercial do país nestas taxas. As regressões indicaram para, dada uma depreciação de 1% do câmbio, um impacto de 0,10% sobre a criação de emprego e um impacto, simétrico, de –0,097% sobre a destruição de emprego no trimestre seguinte Por outro lado, a abertura comercial ocorrida nos anos 90, medida através do grau de abertura setorial, não se mostrou significativo para explicar as variações da criação de empregos e da realocação, tendo um efeito positivo na variação líquida e negativo na destruição de postos de trabalho na indústria gaúcha nos anos 90, liderado, a princípio, pelas exportações.

Influence of Individual Characteristics on Work Engagement and Job Stress in a Sample of National and Foreign Workers in Switzerland

In most Western postindustrial societies today, the population is aging, businesses are faced with global integration, and important migration flows are taking place. Increasingly work organizations are hiring crossnational and multicultural workteams. In this situation it is important to understand the influence of certain individual and cultural characteristics on the process of professional integration. The present study explores the links between personality traits, demographic characteristics (age, sex, education, income, and nationality), work engagement, and job stress. The sample consisted of 618 participants, including 394 Swiss workers (200 women, 194 men) and 224 foreigners living and working in Switzerland (117 women, 107 men). Each participant completed the NEO-FFI, the UWES, and the GWSS questionnaires. Our results show an interaction between age and nationality with respect to work engagement and general job stress. The levels of work engagement and job stress appear to increase with age among national wotkers, whereas they decrease among foreign workers. In addition, work engagement was negatively associated with Neuroticism and positively with the other four personality dimensions. Finally, job stress was positively associated with Neuroticism and Conscientiousness, and negatively associated with Extraversion. However, the strength of these relationships appeared to vary according to the worker's nationality, age, sex, education, and income.

Rule versus interaction function : evaluating regional aggregations of commuting flows in Sweden

The aim of this paper is to evaluate the performance of two divergent methods for delineating commuting regions, also called labour market areas, in a situation that the base spatial units differ largely in size as a result of an irregular population distribution. Commuting patterns in Sweden have been analyzed with geographical information system technology by delineating commuting regions using two regionalization methods. One, a rule-based method, uses one-way commuting flows to delineate local labour market areas in a top-down procedure based on the selection of predefined employment centres. The other method, the interaction-based Intramax analysis, uses two-way flows in a bottom-up procedure based on numerical taxonomy principles. A comparison of these methods will expose a number of strengths and weaknesses. For both methods, the same data source has been used. The performance of both methods has been evaluated for the country as a whole using resident employed population, self-containment levels and job ratios for criteria. A more detailed evaluation has been done in the Goteborg metropolitan area by comparing regional patterns with the commuting fields of a number of urban centres in this area. It is concluded that both methods could benefit from the inclusion of additional control measures to identify improper allocations of municipalities.

Psychometric Properties Evaluation Of A New Ergonomics-related Job Factors Questionnaire Developed For Nursing Workers.

The objectives of this study were to develop a questionnaire that evaluates the perception of nursing workers to job factors that may contribute to musculoskeletal symptoms, and to evaluate its psychometric properties. Internationally recommended methodology was followed: construction of domains, items and the instrument as a whole, content validity, and pre-test. Psychometric properties were evaluated among 370 nursing workers. Construct validity was analyzed by the factorial analysis, known-groups technique, and convergent validity. Reliability was assessed through internal consistency and stability. Results indicated satisfactory fit indices during confirmatory factor analysis, significant difference (p < 0.01) between the responses of nursing and office workers, and moderate correlations between the new questionnaire and Numeric Pain Scale, SF-36 and WRFQ. Cronbach's alpha was close to 0.90 and ICC values ranged from 0.64 to 0.76. Therefore, results indicated that the new questionnaire had good psychometric properties for use in studies involving nursing workers.

FLOWS WITHOUT WANDERING POINTS ON COMPACT CONNECTED SURFACES

Given a compact 2 dimensional manifold M we classify all continuous flows phi without wandering points on M. This classification is performed by finding finitely many pairwise disjoint open phi-invariant subsets {U(1), U(2), ..., U(n)} of M such that U(i=1)(n) (U(i)) over bar = M and each U(i) is either a suspension of an interval exchange transformation, or a maximal open cylinder made up of closed trajectories of phi.

Reduction of chaotic particle transport driven by drift waves in sheared flows

Investigations of chaotic particle transport by drift waves propagating in the edge plasma of tokamaks with poloidal zonal flow are described. For large aspect ratio tokamaks, the influence of radial electric field profiles on convective cells and transport barriers, created by the nonlinear interaction between the poloidal flow and resonant waves, is investigated. For equilibria with edge shear flow, particle transport is seen to be reduced when the electric field shear is reversed. The transport reduction is attributed to the robust invariant tori that occur in nontwist Hamiltonian systems. This mechanism is proposed as an explanation for the transport reduction in Tokamak Chauffage Alfven Bresilien [R. M. O. Galvao , Plasma Phys. Controlled Fusion 43, 1181 (2001)] for discharges with a biased electrode at the plasma edge.

Exploiting Pulsed Flows for Heating Improvement: Application to Determination of Total Reducing Sugars in Molasses and Sugar-Cane Juices

Laminar and pulsed flows typical of multi-commuted and multi-pumping flow systems, were evaluated in relation to analytical procedures carried out at high temperatures. As application, the spectrophotometric determination of total reducing sugars (TRS, hydrolyzed sucrose plus reducing sugars) in sugar-cane juice and molasses was selected. The method involves in-line hydrolysis of sucrose and alkaline degradation of the reducing sugars at about 98 degrees C. Better results were obtained with pulsed flows, due to the efficient radial mass transport inherent to the multi-pumping flow system. The proposed system presents favorable characteristics of ruggedness, analytical precision (r.s.d. < 0.013 for typical samples), stability (no measurable baseline drift during 4-h working periods), linearity of the analytical curve (r > 0.992, n = 5, 0.05-0.50% w/v TRS) and sampling rate (65 h(-1)). Results are in agreement with ion chromatography.

An improved procedure for flow-based turbidimetric sulphate determination based on a liquid core waveguide and pulsed flows

An improved flow-based procedure is proposed for turbidimetric sulphate determination in waters. The flow system was designed with solenoid micro-pumps in order to improve mixing conditions and minimize reagent consumption as well as waste generation. Stable baselines were observed in view of the pulsed flow characteristic of the systems designed with solenoid micro-pumps, thus making the use of washing solutions unnecessary. The nucleation process was improved by stopping the flow prior to the measurement, thus avoiding the need of sulphate addition. When a 1-cm optical path flow cell was employed, linear response was achieved within 20-200 mg L(-1), described by the equation S = -0.0767 + 0.00438C (mg L(-1)), r = 0.999. The detection limit was estimated as 3 mg L(-1) at the 99.7% confidence level and the coefficient of variation was 2.4% (n = 20). The sampling rate was estimated as 33 determinations per hour. A long pathlength (100-cm) flow cell based on a liquid core waveguide was exploited to increase sensitivity in turbidimetry. Baseline drifts were avoided by a periodical washing step with EDTA in alkaline medium. Linear response was observed within 7-16 mg L(-1), described by the equation S = -0.865 + 0.132C (mg L(-1)), r = 0.999. The detection limit was estimated as 150 mu g L(-1) at the 99.7% confidence level and the coefficient of variation was 3.0% (n = 20). The sampling rate was estimated as 25 determinations per hour. The results obtained for freshwater and rain water samples were in agreement with those achieved by batch turbidimetry at the 95% confidence level. (C) 2008 Elsevier B.V All rights reserved.

Galerkin finite element method for incompressible thermofluid flows framed within the bond graph theory

In this paper a bond graph methodology is used to model incompressible fluid flows with viscous and thermal effects. The distinctive characteristic of these flows is the role of pressure, which does not behave as a state variable but as a function that must act in such a way that the resulting velocity field has divergence zero. Velocity and entropy per unit volume are used as independent variables for a single-phase, single-component flow. Time-dependent nodal values and interpolation functions are introduced to represent the flow field, from which nodal vectors of velocity and entropy are defined as state variables. The system for momentum and continuity equations is coincident with the one obtained by using the Galerkin method for the weak formulation of the problem in finite elements. The integral incompressibility constraint is derived based on the integral conservation of mechanical energy. The weak formulation for thermal energy equation is modeled with true bond graph elements in terms of nodal vectors of temperature and entropy rates, resulting a Petrov-Galerkin method. The resulting bond graph shows the coupling between mechanical and thermal energy domains through the viscous dissipation term. All kind of boundary conditions are handled consistently and can be represented as generalized effort or flow sources. A procedure for causality assignment is derived for the resulting graph, satisfying the Second principle of Thermodynamics. (C) 2007 Elsevier B.V. All rights reserved.

Knowledge and information flows in supply chains: A study on pharmaceutical companies

A great deal of attention in the supply chain management literature is devoted to study material and demand information flows and their coordination. But in many situations, supply chains may convey information from different nature, they may be an important channel companies have to deliver knowledge, or specifically, technical information to the market. This paper studies the technical flow and highlights its particular requirements. Drawing upon a qualitative field research, it studies pharmaceutical companies, since those companies face a very specific challenge: consumers do not have discretion over their choices, ethical drugs must be prescribed by physicians to be bought and used by final consumers. Technical information flow is rich, and must be redundant and early delivered at multiple points. Thus, apart from the regular material channel where products and order information flow, those companies build a specialized information channel, developed to communicate to those who need it to create demand. Conclusions can be extended to supply chains where products and services are complex and decision makers must be clearly informed about technology-related information. (C) 2009 Elsevier B.V. All rights reserved.

Bed shear stress measurements in dam break and swash flows

A novel shear plate was used to make direct bed shear stress measurements in laboratory dam break and swash flows on smooth, fixed, impermeable beds. The pressure gradient due to the slope of the fluid free-surface across the plate was measured using pressure transducers. Surface elevation was measured at five locations using acoustic displacement sensors. Flow velocity was measured using an Acoustic-Doppler Velocimeter and calculated using the ANUGA inundation model. The measured bed shear stress at the dam break fluid tip for an initially dry, horizontal bed was close to twice that estimated using steady flow theory. The temporal variation of swash bed shear stress showed a large peak in landward directed stress at the uprush tip, followed by a rapid decay throughout the uprush flow interior. The peak seaward directed stress during the backwash phase was less than half that measured in the uprush. Close to the still water line, in the region of bore collapse and at the time of initial uprush, favourable pressure gradients were measured. In the lower swash region predominately weak adverse pressure gradients were measured.

Air Entrainment Processes in a Full-Scale Rectangular Dropshaft at Large Flows

Rectangular dropshafts, commonly used in sewers and storm water systems, are characterised by significant flow aeration. New detailed air-water flow measurements were conducted in a near-full-scale dropshaft at large discharges. In the shaft pool and outflow channel, the results demonstrated the complexity of different competitive air entrainment mechanisms. Bubble size measurements showed a broad range of entrained bubble sizes. Analysis of streamwise distributions of bubbles suggested further some clustering process in the bubbly flow although, in the outflow channel, bubble chords were in average smaller than in the shaft pool. A robust hydrophone was tested to measure bubble acoustic spectra and to assess its field application potential. The acoustic results characterised accurately the order of magnitude of entrained bubble sizes, but the transformation from acoustic frequencies to bubble radii did not predict correctly the probability distribution functions of bubble sizes.