Integrating professional education, research and extensionin irrigated agriculture technology centers

With the objective to stimulate the use of irrigation and the electric energy fee reduction during night time program granted by the 2004 Federal law, the Government of the state of Paraná, Brazil launched the Night Irrigation Program - NPI. Beyond this discount, the farmer that adheres to NPI will get additional benefits, as completion of the electric grid without cost, subsidized financing of equipment, technical assistance, support with environmental farm compliance, and the possibility of replacing the entire pump energy matrix. As part of the NPI strategy of action, installation of learning centers for irrigation technology was planned in agricultural schools, thus contributing both to improve technical professional training in agriculture, and for the dissemination of knowledge in irrigated agriculture, in order to increase agricultural productivity.

Adequação de engates rápidos de aspersores como conectores de mangueira para distribuição de água em sulcos de irrigação

As a way to reduce water losses in furrow irrigation systems, used in fresh market tomato production, farmers are improperly distributing water into the field using plastic hose. The objective of this work was to study the suitability of using quick coupler sprinkler as hose connectors for water distribution in tomato plantation. The first step of the study was to assess the current hose field operation for tomato growers. Subsequently, four models of quick couplers sprinklers available in the market were tested in laboratory to determine the coefficient of resistance, the equivalent tube length, the head loss curve and the linking efficiency. As result, a structural design for hose connectors was presented using the model of coupling with the best hydraulic performance. Additionally, some technical recommendations on its use in irrigation water distribution are highlighted. Despite the requirement for additional field trials, the proposed system has potential to optimize the water use efficiency, to improve workers ergonomic conditions, and ensure good profitability to the producer.

Análise Comparativa da Rentabilidade de algumas Culturas de Regadio na Ilha de Santiago

A informação sobre a formação do custo de produção, a produtividade e conhecimento dos elementos que formam o custo de produção, são fundamentais para a tomada de decisão dos agricultores na adopção de técnicas para a realização das suas actividades agrícolas. Com este trabalho pretende-se analisar a produção, o custo de produção e os níveis de rentabilidade das culturas de tomate, repolho e cenoura comparativamente às duas tecnologias de rega utilizadas, nas condições do cultivo do agricultor da Ilha de Santiago. Para isso foi concebido uma ficha de inquérito, na qual foi registadas todas as informações técnicas e económicas junto dos agricultores referente às culturas mencionadas, à medida que vem se efectuando visitas as suas explorações agrícolas. Os resultados demonstram que produzir cenoura no sistema gota-gota garantam maior produtividade em relação ao sistema tradicional. O mesmo não se pode dizer em relação ao tomate e repolho. Em relação ao custo de produção comparativamente às tecnologias de rega a analise estatística não acusou diferenças significativas. Os resultados demonstram ainda que a produção das citadas culturas em ambas tecnologias é rentável e com a economia de água na ordem dos 50% quando as mesmas são praticadas no sistema gota-gota. Entretanto, concluiu-se que o rendimento do agricultor é determinado pelo nível de produção e pela época de produção, pois no período quente o preço de produtos em causa é mais elevado e consequentemente o produtor arrecada maior receita.

Deficiência hídrica em plantas de pimentão (Capsicum annum L.) fertirrigadas e seus efeitos sobre a produção de massa e parâmetros bioquímicos

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Modelagem para o dimensionamento de um sistema de microirrigação utilizando microtubos ramificados

Este trabalho foi realizado com o objetivo de se modelar e avaliar o comportamento hidráulico de microtubos ramificados, com base na relação entre vazão e comprimento dos microtubos para uma pressão de entrada, operando sob regime laminar. Dois modelos matemáticos foram estudados, em que um considerou a perda localizada de carga no dimensionamento dos microtubos ramificados e o outro a desconsiderou. O experimento para validação dos modelos foi conduzido no Laboratrio de Hidráulica da Escola Superior de Agricultura "Luiz de Queiroz" (ESALQ-USP), Piracicaba, SP, medindo-se a vazão dos emissores para as pressões de 14,7; 18,6; 39,2 e 58,9 kPa. A configuração do sistema de irrigação consistiu de uma linha lateral com diâmetro nominal (DN) de 10,0 mm, na qual foram inseridos microtubos conectores com DN de 0,8 mm conectados a um segmento de tubo de derivação e acoplados seis microtubos emissores com DN de 0,7 mm. Verificou-se que, dentre os modelos matemáticos, aquele que considerou a perda localizada de carga apresentou maior exatidão pois teve elevado, um bom índice de Willmott e baixo erro quadrático médio.

Tecnología e incertidumbre en la práctica del riego en la provincia de Córdoba

En el presente trabajo se busca caracterizar a los regantes de Río Segundo, Córdoba, en términos comparativos y en vinculación con la tecnología. Se trata de pequeños y medianos productores localizados en el Espinal cordobés, límite de la región pampeana argentina, que se dedican a la agricultura extensiva de cereales y oleaginosas utilizando riego suplementario con agua subterránea. El objeto de estudio se aborda considerando que las lógicas de conocimiento atraviesan la producción y que el crecimiento de la incertidumbre es impulsado por la práctica de la innovación y la búsqueda de eficiencia. La gestión profesionalizada de la producción que lleva a la planificación de las actividades productivas en base a la reflexión permanente, revela la necesidad de conocer aquello que aún no se conoce, lo cual está en relación directa con la incertidumbre y con una mayor toma conciencia de los riesgos, tanto climáticos como económicos que se vinculan con la producción. Para alcanzar los objetivos propuestos se utilizó una metodología cualitativa basada en el trabajo de campo, la realización de entrevistas en profundidad y un marco interpretativo crítico complementado con elementos de la teoría social del riesgo.

Tecnología e incertidumbre en la práctica del riego en la provincia de Córdoba

En el presente trabajo se busca caracterizar a los regantes de Río Segundo, Córdoba, en términos comparativos y en vinculación con la tecnología. Se trata de pequeños y medianos productores localizados en el Espinal cordobés, límite de la región pampeana argentina, que se dedican a la agricultura extensiva de cereales y oleaginosas utilizando riego suplementario con agua subterránea. El objeto de estudio se aborda considerando que las lógicas de conocimiento atraviesan la producción y que el crecimiento de la incertidumbre es impulsado por la práctica de la innovación y la búsqueda de eficiencia. La gestión profesionalizada de la producción que lleva a la planificación de las actividades productivas en base a la reflexión permanente, revela la necesidad de conocer aquello que aún no se conoce, lo cual está en relación directa con la incertidumbre y con una mayor toma conciencia de los riesgos, tanto climáticos como económicos que se vinculan con la producción. Para alcanzar los objetivos propuestos se utilizó una metodología cualitativa basada en el trabajo de campo, la realización de entrevistas en profundidad y un marco interpretativo crítico complementado con elementos de la teoría social del riesgo.

Tecnología e incertidumbre en la práctica del riego en la provincia de Córdoba

En el presente trabajo se busca caracterizar a los regantes de Río Segundo, Córdoba, en términos comparativos y en vinculación con la tecnología. Se trata de pequeños y medianos productores localizados en el Espinal cordobés, límite de la región pampeana argentina, que se dedican a la agricultura extensiva de cereales y oleaginosas utilizando riego suplementario con agua subterránea. El objeto de estudio se aborda considerando que las lógicas de conocimiento atraviesan la producción y que el crecimiento de la incertidumbre es impulsado por la práctica de la innovación y la búsqueda de eficiencia. La gestión profesionalizada de la producción que lleva a la planificación de las actividades productivas en base a la reflexión permanente, revela la necesidad de conocer aquello que aún no se conoce, lo cual está en relación directa con la incertidumbre y con una mayor toma conciencia de los riesgos, tanto climáticos como económicos que se vinculan con la producción. Para alcanzar los objetivos propuestos se utilizó una metodología cualitativa basada en el trabajo de campo, la realización de entrevistas en profundidad y un marco interpretativo crítico complementado con elementos de la teoría social del riesgo.

Development strategy in Bihar through revitalizing the agricultural sector : a preliminary analysis

Based mainly on secondary data and partly on primary information obtained through field surveys in selected rural areas in Bihar in 2011, this paper firstly argues the critical importance of agricultural growth for overall economic development, and then reviews the sluggish growth of agriculture in Bihar in the past and examines the major reasons for this. The long-term negligence of agricultural research (especially development and diffusion endeavors for improved rice varieties suitable to the local conditions of Bihar) by the state government and some sort of ‘backwardness’ in tube-well irrigation technology can be pointed out as important constraints. There is, in particular, the ‘paradox’ in Bihar agriculture of why rice and wheat yields have remained so low in spite of the relatively well-developed irrigation by tube-wells. Finally, by showing the process of a rapid increase in autumn and winter rice yields during the 1990s in West Bengal, it is suggested that Bihar farmers and policy-makers should learn from the experience of West Bengal in order to get some hints for the development of the rice sector in Bihar.

CottonInfo Extending Research

There are many ways in which research messages and findings can be extended to the expansive cotton community. As everyone learns differently it is crucial that information is delivered in a variety of ways to meet the various learning needs of the CottonInfo team’s broad audience. In addition different cotton production areas often require targeted information to address specific challenges. Successful implementation of innovative research outcomes typically relies on a history of cultivated communication between the researcher and the end-user, the grower. The CottonInfo team, supported by a joint venture between Cotton Seed Distributors, Cotton Research Development Corporation, Cotton Australia and other collaborative partners, represents a unique model of extension in Australian agriculture. Industry research is extended via regionally based Regional Development Officers backed by support from Technical Specialists. The 2015 Cotton Irrigation Technology Tour is one example of a successful CottonInfo capacity building activity. This tour took seven CRDC funded irrigation-specific researchers to Emerald, Moree and Nevertire to showcase their research and technologies. These events provided irrigators and consultants with the opportunity to hear first-hand from researchers about their technologies and how they could be applied onfarm. This tour was an example of how the CottonInfo team can connect growers and researchers, not only to provide an avenue for growers to learn about the latest irrigation research, but for researchers to receive feedback about their current and future irrigation research.

Optimizing endodontic irrigation: advantages of negative apical pressure technology

FAPESP #2010/16002-4

Application of low cost technology for the management of irrigation in organic orchards

Throughout history, humans have cyclically return to their old traditions such as the organic orchards. Nowadays, these have been integrated into the modern cities and could supply fresh vegetables to the daily food improving human health. Organic orchards grow crops without pesticides and artificial fertilizers thus, they are respectful with the environment and guarantee the food's safety . In modern society, the application of new technology is a must, in this case to obtain an efficient irrigation. In order to monitor a proper irrigation and save water and energy, soil water content probes are used to measure soil water content. Among them, capacitive probes ,monitored with a specific data logger, are typically used. Most of them, specially the data loggers, are expensive and in many cases are not used. In this work, we have applied the open hardware Arduino to build and program a low cost datalogger for the programming of irrigation in an experimental organic orchard. Results showed that the application of such as low cost technology, which is easily available in the market and easy to understand, everyone can built and program its own device helping in managing water resources in organic orchards .

Flow rate sprinkler development for site-specific irrigation

Due to the rapid depletion of water resources, water must be used more efficiently in agriculture to maintain current levels of yield in irrigated areas. The efficiency of irrigation systems can be increased by adjusting the amount of water applied to specific conditions of soil and crop, which may vary in a field. Taking into account spatial and temporal variability, it is evident that an equipment capable of providing different irrigation levels is necessary to meet the water requirement of the soil. This work aims to develop and evaluate a flow rate sprinkler to be used in center pivots or linear moving irrigation systems, with potential for utilization in irrigation scheduling. A prototype was developed by duplicating its calibrations, and discharge coefficient adjustment was carried out in the laboratory. To predict the flow rate, a successful model that represented the operation of the flow rate sprinkler was established. The calibration of the flow rate sprinkler prototype showed satisfactory statistical and technical results. Automation of the prototype was achieved by driving a step motor using communication from the parallel port of a microcomputer, which was controlled by a software developed for this purpose. The results were satisfactory and technically feasible.

Analysis of constructed wetland performance for irrigation reuse

Most of the wastewater treatment systems in small rural communities of the Cova da Beira region (Portugal) consist of constructed wetlands (CW) with horizontal subsurface flow (HSSF). It is believed that those systems allow the compliance of discharge standards as well as the production of final effluents with suitability for reuse. Results obtained in a nine-month campaign in an HSSF bed pointed out that COD and TSS removal were lower than expected. A discrete sampling also showed that removal of TC, FC and HE was not enough to fulfill international irrigation goals. However, the bed had a very good response to variation of incoming nitrogen loads presenting high removal of nitrogen forms. A good correlation between mass load and mass removal rate was observed for BOD5, COD, TN, NH4-N, TP and TSS, which shows a satisfactory response of the bed to the variable incoming loads. The entrance of excessive loads of organic matter and solids contributed for the decrease of the effective volume for pollutant uptake and therefore, may have negatively influenced the treatment capability. Primary treatment should be improved in order to decrease the variation of incoming organic and solid loads and to improve the removal of COD, solids and pathogenic. The final effluent presented good physical-chemical quality to be reused for irrigation, which is the most likely application in the area.